the state (client, session, winlink, pane) for it it before entering the
command. Each command provides some flags that tell the prepare step
what it is expecting.
This is a requirement for having hooks on commands (for example, if you
hook "select-window -t1:2", the hook command should to operate on window
1:2 not whatever it thinks is the current window), and should allow some
other target improvements.
The old cmd_find_* functions remain for the moment but that layer will
be dropped later.
Joint work with Thomas Adam.
from the parent (global) tree, instead make it remove by name like options.
While here, also tidy up a few bits of options and hooks handling (use
RB_FOREACH_SAFE, and a helper function for the free).
poor idea that was fairly quickly replaced by SGR mouse input (which is
now widespread). It is impossible to tell the difference between UTF-8
and non-UTF-8 mouse input; since the mouse-utf8 option was removed tmux
has not handled it correctly in any case; and it is ridiculous to have
three different forms of mouse input.
of storing a full grid_cell with UTF-8 data and everything, store a new
type grid_cell_entry. This can either be the cell itself (for ASCII
cells), or an offset into an extended array (per line) for UTF-8
data.
This avoid a large (8 byte) overhead on non-UTF-8 cells (by far the
majority for most users) without the complexity of the shadow array we
had before. Grid memory without any UTF-8 is about half.
The disadvantage that cells can no longer be modified in place and need
to be copied out of the grid and back but it turned out to be lot less
complicated than I expected.
uint64_t and converting UTF-8 to Unicode on input and the reverse on
output. (This allows key bindings, there are still omissions - the
largest being that the various prompts do not accept UTF-8.)
around, we can't use file descriptors for the working directory because
we will be unable to pass it to a privileged process to tell it where to
read or write files or spawn children. So move tmux back to using
strings for the current working directory. We try to check it exists
with access() when it is set but ultimately fall back to ~ if it fails
at time of use (or / if that fails too).
#{=10:...} length limit, add #{t:...} to convert a time_t format to a
string, #{b:...} for basename and #{d:...} for dirname. Remove all the
foo_string time formats as they can now be replaced by "t:", for example
#{window_activity_string} becomes #{t:window_activity}.
the main loop after events that may have changed the pane, but do so at
most once every 500 millis. If the pane changed too soon, use a timer to
ensure that a check happens later.
can't do the name check every loop, because that is too expensive, and
we can't make sure it only happens infrequently because we have no idea
when the next change will happen.
but that can only happen when we have already been woken up by a read
event, so there is no need for a timer, we can just check the changed
flag on the end of that read event (we already loop over the windows to
check for bells etc anyway).
socketpair and setting it to -1 to mark when the other side is
closed. This avoids closing it while the libevent bufferevent still has
it (it could try to add it to the polled set which some mechanisms don't
like). Fixes part a problem reported by Bruno Sutic.
use event_once to queue a callback to deal with them. Also dead clients
with references would never actually be freed because the wrap-up
functions (the callback for stdin, or status_prompt_clear) would never
be called. So call them in server_client_lost.
server at a time; it may be toggled or cleared with select-pane -m and
-M (the border is highlighted). A new target '~' or '{marked}' specifies
the marked pane to commands and it is the default target for the
swap-pane and join-pane -s flag (this makes them much simpler to use -
mark the source pane and then change to the target pane to run swapp or
joinp).
multiple times, also remove the default space in window_flags and use a
conditional to add it in window-status-format (this means additional
flags can be added in the option without extra spaces). From Thomas Adam
with tweaks by me.
consistent but with much less duplication, but keeping the same internal
API. Also adds more readable aliases for some of the special tokens used
in targets (eg "{start}" instead of "^"). Some behaviours may have
changed, for example prefix matches now happen before fnmatch.
keys. The default key bindings become the "prefix" table and -n the
"root" table. Keys may be bound in new tables with bind -T and
switch-client -T used to specify the table in which the next key should
be looked up. Based on a diff from Keith Amling.
options for "mouse-this" and "mouse-that", mouse events may be bound as
keys and there is one option "mouse" that turns on mouse support
entirely (set -g mouse on).
See the new MOUSE SUPPORT section of the man page for description of the
key names and new flags (-t= to specify the pane or window under mouse
as a target, and send-keys -M to pass through a mouse event).
The default builtin bindings for the mouse are:
bind -n MouseDown1Pane select-pane -t=; send-keys -M
bind -n MouseDown1Status select-window -t=
bind -n MouseDrag1Pane copy-mode -M
bind -n MouseDrag1Border resize-pane -M
To get the effect of turning mode-mouse off, do:
unbind -n MouseDrag1Pane
unbind -temacs-copy MouseDrag1Pane
The old mouse options are now gone, set-option -q may be used to
suppress warnings if mixing configuration files.
directly with a helper function in the cmd_entry, include a table of
bind-key commands and pass them through the command parser and a
temporary cmd_q.
As well as being smaller, this will allow default bindings to be command
sequences which will probably be needed soon.
1. In vi mode the selection doesn't include the last character if you
moved the cursor up or left.
2. In emacs mode the selection includes the last character if you moved
the cursor to the left.
From Balazs Kezes.
entry:
F13-F24 are S-F1 to S-F12
F25-F36 are C-F1 to C-F12
F37-F48 are C-S-F1 to C-S-F12
F49-F60 are M-F1 to M-F12
and F61-F63 are M-S-F1 to M-S-F3
This should be no difference for applications inside tmux, but means
that any key binding for F13 will need to be replaced by S-F1 and so on.
split-window, respawn-window or respawn-pane, pass them directly to
execvp() to help avoid quoting problems. One argument still goes to "sh
-c" like before. Requested by many over the years. Patch from J Raynor.
much as before - buffers are automatically named "buffer0000",
"buffer0001" and so on and ordered as a stack. Buffers can be named
explicitly when creating ("loadb -b foo" etc) or renamed ("setb -b
buffer0000 -n foo"). If buffers are named explicitly, they are not
deleted when buffer-limit is reached. Diff from J Raynor.
irritating flaws:
a) The old way of always using the top or left if the choice is
ambiguous is annoying when the layout is unbalanced.
b) The new way of remembering the last used pane is annoying if the
layout is balanced and the leftmost is obvious to the user (because
clearly if we go right from the top-left in a tiled set of four we want
to end up in top-right, even if we were last using the bottom-right).
So instead, use a combination of both: if there is only one possible
pane alongside the current pane, move to it, otherwise choose the most
recently used of the choice.
mostly useless and annoying messages. Change those commands to silence
on success like all the others. Still accept the -q command line flag
and "quiet" server option for now.
store it in struct mouse_event, reduce the scroll size the 3 but allow
shift to reduce it to 1 and meta and ctrl to multiply by 3 if the
terminal supports them, also support wheel in choose mode. From Marcel
Partap.
options with a single foo-style option. For example:
set -g status-fg yellow
set -g status-bg red
set -g status-attr blink
Becomes:
set -g status-style fg=yellow,bg=red,blink
The -a flag to set can be used to add to rather than replace a style. So:
set -g status-bg red
Becomes:
set -ag status-style bg=red
Currently this is fully backwards compatible (all *-{fg,bg,attr} options
remain) but the plan is to deprecate them over time.
From Tiago Cunha.
while and in fact it is less useful that using the client ttyname. So
don't bother and don't pass it from the client. If we need it in future
it is in c->environ.
descriptors rather than strings.
- Each session still has a current working directory.
- New sessions still get their working directory from the client that
created them or its attached session if any.
- New windows are created by default in the session working directory.
- The -c flag to new, neww, splitw allows the working directory to be
overridden.
- The -c flag to attach let's the session working directory be changed.
- The default-path option has been removed.
To get the equivalent to default-path '.', do:
bind c neww -c $PWD
To get the equivalent of default-path '~', do:
bind c neww -c ~
This also changes the client identify protocol to be a set of messages rather
than one as well as some other changes that should make it easier to make
backwards-compatible protocol changes in future.
and in fact it is less useful that using the client ttyname. So don't bother
and don't pass it from the client. If we need it in future it is in c->environ.
rather than strings.
- Each session still has a current working directory.
- New sessions still get their working directory from the client that created
them or its attached session if any.
- New windows are created by default in the session working directory.
- The -c flag to new, neww, splitw allows the working directory to be
overridden.
- The -c flag to attach let's the session working directory be changed.
- The default-path option has been removed.
To get the equivalent to default-path '.', do:
bind c neww -c $PWD
To get the equivalent of default-path '', do:
bind c neww -c '#{pane_current_path}'
The equivalent of default-path '~' is left as an exercise for the reader.
This also changes the client identify protocol to be a set of messages rather
than one as well as some other changes that should make it easier to make
backwards-compatible protocol changes in future.
When clearing WINLINK_ALERTFLAGS for all sessions, we must also, for that
window, clear the window->flags as well, otherwise sessions may well still
see flags for winlinks long since cleared.
This therfore introduces WINDOW_ALERTFLAGS to help with this.
the server and fd passing is not necessary. Needs some ifdefs unfortunately but
no way around that and some of them can go next time we're willing to do a
protocol bump. Patch from J Raynor jxraynor at gmail dot com.
commands and allow a command to block execution of subsequent
commands. This allows run-shell and if-shell to be synchronous which has
been much requested.
Each client has a default command queue and commands are consumed one at
a time from it. A command may suspend execution from the queue by
returning CMD_RETURN_WAIT and then resume it by calling cmd_continue() -
for example run-shell does this from the callback that is fired after
the job is freed.
When the command queue becomes empty, command clients are automatically
exited (unless attaching). A callback is also fired - this is used for
nested commands in, for example, if-shell which can block execution of
the client's cmdq until a new cmdq becomes empty.
Also merge all the old error/info/print functions together and lose the
old curclient/cmdclient distinction - a cmdq is bound to one client (or
none if in the configuration file), this is a command client if
c->session is NULL otherwise an attached client.
or unzoom (restored to the normal layout) if it already zoomed, bound to C-b z
by default. The pane is unzoomed on pretty much any excuse whatsoever.
We considered making this a new layout but the requirements are quite different
from layouts so decided it is better as a special case. Each current layout
cell is saved, a temporary one-cell layout generated and all except the active
pane set to NULL.
Prompted by suggestions and scripts from several. Thanks to Aaron Jensen and
Thiago Padilha for testing an earlier version.
commands and allow a command to block execution of subsequent commands. This
allows run-shell and if-shell to be synchronous which has been much requested.
Each client has a default command queue and commands are consumed one at a time
from it. A command may suspend execution from the queue by returning
CMD_RETURN_WAIT and then resume it by calling cmd_continue() - for example
run-shell does this from the callback that is fired after the job is freed.
When the command queue becomes empty, command clients are automatically exited
(unless attaching). A callback is also fired - this is used for nested commands
in, for example, if-shell which can block execution of the client's cmdq until
a new cmdq becomes empty.
Also merge all the old error/info/print functions together and lose the old
curclient/cmdclient distinction - a cmdq is bound to one client (or none if in
the configuration file), this is a command client if c->session is NULL
otherwise an attached client.
- rename client and session to start_client and start_session in
window_choose_data struct. also add TREE_OTHER define and reorder the
struct
- rename window_choose_ctx to window_choose_data_run
- don't pass a cmd_ctx into window_choose_create (will let it use a
different client later). instead take type, session, client
- add window_choose_data_free and use it to dispose of wcd rather than
each cmd-*.c doing it individually
- change so ref counting is done by wcd_add and wcd_free rather than
callers. this means 1 ref for each item but what of it :-)
- also add a ref to tree_session - not sure if this is needed?
- all the callbacks except choose-client and find-window are the same so
remove them and add window_choose_default_callback
- reorder/rename some other bits and pieces for tidyness
Sync from OpenBSD.
* obsd-master:
Add halfpage commands to mode command string table (missed by accident), from Thomas Adam.
Clarify some points about config files, notably that they are only read at server start. From Thomas Adam.
Use a utility function for common code to show errors in config file, from Thomas Adam.
Sync from OpenBSD.
* obsd-master:
Allow session tree (C-b s) to expand and collapse sessions with left/right/space keys. From Thomas Adam.
Remove some out of date text from man page, from Thomas Adam.
Fix up window reference counting and don't crash if the rename timer
fires while the window is dead but still referenced. Fixes problem
reported by Michael Scholz.
Instead of numbering choose mode items 0-9a-z and then nothing, number
them all and if there are more than 10 use a prompt when 0-9 is
pressed. From Thomas Adam.
Make command exec functions return an enum rather than -1/0/1 values and
add a new value to mean "leave client running but don't attach" to fix
problems with using some commands in a command sequence. Most of the
work by Thomas Adam, problem reported by "jspenguin" on SF bug 3535531.
add a new value to mean "leave client running but don't attach" to fix
problems with using some commands in a command sequence. Most of the
work by Thomas Adam, problem reported by "jspenguin" on SF bug 3535531.
Provide common helper function for adding windows and sessions to choose
lists and expand %% in command before using it rather than at callback
time. From Thomas Adam.
Add a skeleton mode to tmux (called "control mode") that let's tmux
commands be sent and output received on stdout. This can be used to
integrate with other terminal emulators and should allow some other
things to be made simpler later. More to come so doesn't do much yet and
deliberately not documented.
commands be sent and output received on stdout. This can be used to
integrate with other terminal emulators and should allow some other
things to be made simpler later. More to come so doesn't do much yet and
deliberately not documented.
Instead of passing stdin/stdout/stderr file descriptors over imsg and
handling them in the server, handle them in the client and pass buffers
over imsg. This is much tidier for some upcoming changes and the
performance hit isn't critical.
The tty fd is still passed to the server as before.
This bumps the tmux protocol version so new clients and old servers are
incompatible.
handling them in the server, handle them in the client and pass buffers
over imsg. This is much tidier for some upcoming changes and the
performance hit isn't critical.
The tty fd is still passed to the server as before.
This bumps the tmux protocol version so new clients and old servers are
incompatible.
Add a flag to move-window to renumber the windows in a session (closing
any gaps) and add an option to do this automatically each time a window
is killed. From Thomas Adam.
Add a simple form of output rate limiting by counting the number of
certain C0 sequences (linefeeds, backspaces, carriage returns) and if it
exceeds a threshold (current default 50/millisecond), start to redraw
the pane every 100 milliseconds instead of making each change as it
comes. Two configuration options - c0-change-trigger and
c0-change-interval.
This makes tmux much more responsive under very fast output (for example
yes(1) or accidentally cat'ing a large file) but may not be perfect on
all terminals and connections - feedback very welcome, particularly
where this change has a negative rather than positive effect (making it
off by default is a possibility).
After much experimentation based originally on a request Robin Lee
Powell (which ended with a completely different solution), this idea
from discussion with Ailin Nemui.
certain C0 sequences (linefeeds, backspaces, carriage returns) and if it
exceeds a threshold (current default 50/millisecond), start to redraw
the pane every 100 milliseconds instead of making each change as it
comes. Two configuration options - c0-change-trigger and
c0-change-interval.
This makes tmux much more responsive under very fast output (for example
yes(1) or accidentally cat'ing a large file) but may not be perfect on
all terminals and connections - feedback very welcome, particularly
where this change has a negative rather than positive effect (making it
off by default is a possibility).
After much experimentation based originally on a request Robin Lee
Powell (which ended with a completely different solution), this idea
from discussion with Ailin Nemui.
On xterm 271 and later, put the terminal into SCL 5 and use DECCRA for
scrolling the region in panes (if the large region check isn't
hit). With help from Ailin Nemui.
Use a lock file and flock() to serialize server start, avoids problems
when running a bunch of tmux from cron at the same time. Based on a diff
from Tim Ruehsen.
Support "bracketed paste" mode. This adds a -p flag to paste-buffer - if
this is used and the application has requested bracketed pastes, then
tmux surrounds the pasted text by \033[200~ and \033[201~. Applications
like vim can (apparently) use this to avoid, for example, indenting the
text. From Ailin Nemui.
this is used and the application has requested bracketed pastes, then
tmux surrounds the pasted text by \033[200~ and \033[201~. Applications
like vim can (apparently) use this to avoid, for example, indenting the
text. From Ailin Nemui.
Add move-pane command (like join-pane but allows the same window). Also
-b flag to join-pane and move-pane to place the pane to the left or
above. From George Nachman.
Provide defined ways to set the various default-path possibilities: ~
for home directory, . for server start directory, - for session start
directory and empty for the pane's working directory (the default). All
can also be used as part of a relative path (eg -/foo). Also provide -c
flags to neww and splitw to override default-path setting.
Based on a diff from sthen. ok sthen
for home directory, . for server start directory, - for session start
directory and empty for the pane's working directory (the default). All
can also be used as part of a relative path (eg -/foo). Also provide -c
flags to neww and splitw to override default-path setting.
Based on a diff from sthen. ok sthen
Drop the ability to have a list of keys in the prefix in favour of two
separate options, prefix and prefix2. This simplifies the code and gets
rid the data options type which was only used for this one option.
Also add a -2 flag to send-prefix to send the secondary prefix key,
fixing a cause of minor irritation.
People who want three prefix keys are out of luck :-).
separate options, prefix and prefix2. This simplifies the code and gets
rid the data options type which was only used for this one option.
Also add a -2 flag to send-prefix to send the secondary prefix key,
fixing a cause of minor irritation.
People who want three prefix keys are out of luck :-).
default-path isn't empty, it is used. Otherwise:
1) If tmux neww is run from the command line, the working directory of the
client is used.
2) Otherwise use some platform specific code to retrieve the current working
directory of the process in the active pane.
3) If that fails, the directory where the session was created is used.
Idea and support code, Linux, Solaris, FreeBSD bits by Romain Francoise,
OpenBSD bits by me.
default-path isn't empty, it is used. Otherwise:
1) If tmux neww is run from the command line, the working directory of the
client is used.
2) Otherwise sysctl KERN_PROC_CWD is used to retrieve the current
working directory of the process in the active pane.
3) If that fails, the directory where the session was created is used.
Support code by Romain Francois, OpenBSD specific bits by me.
Note this requires a recent userland and kernel with KERN_PROC_CWD.
Add initial framework for more powerful formatting of command output and
use it for list-{panes,windows,sessions}. This allows more descriptive
replacements (such as #{session_name}) and conditionals.
Later this will be used for status_replace and list-keys and other
places.
use it for list-{panes,windows,sessions}. This allows more descriptive
replacements (such as #{session_name}) and conditionals.
Later this will be used for status_replace and list-keys and other
places.
Date: 2011/06/05 11:53:05
Author: nicm
Branch: HEAD
Tag: (none)
Log:
Get rid of the layout string code which tries to walk through the layout
hierarchy and instead just look at what panes are actually in the window.
Support xterm(1) cursor colour change sequences through terminfo(5) Cc
(set) and Cr (reset) extensions. Originally by Sean Estabrooks, tweaked
by me and Ailin Nemui.
Support setting the xterm clipboard when copying from copy mode using
the xterm escape sequence for the purpose (if xterm is configured to
allow it).
Written by and much discussed Ailin Nemui, guidance on
xterm/termcap/terminfo from Thomas Dickey.
Use the tsl and fsl terminfo(5) capabilities to update terminal title
and automatically fill them in on terminals with the XT capability
(which means their title setting is xterm-compatible). From hsim at
gmx.li.
the xterm escape sequence for the purpose (if xterm is configured to
allow it).
Written by and much discussed Ailin Nemui, guidance on
xterm/termcap/terminfo from Thomas Dickey.
When mode-mouse is on (it is off by default), automatically enter copy
mode when the mouse is dragged or the mouse wheel is used. Also exit
copy mode when the mouse wheel is scrolled off the bottom. Discussed
with and written by hsim at gmx dot li.
mode when the mouse is dragged or the mouse wheel is used. Also exit
copy mode when the mouse wheel is scrolled off the bottom. Discussed
with and written by hsim at gmx dot li.
|Date: 2011/04/18 20:49:05
|Author: nicm
|Branch: HEAD
|Tag: (none)
|Log:
|Add an option (mouse-select-window) which allows the mouse to be used by
|clicking on the status line, written by hsim at gmx dot li.
|Date: 2011/04/06 22:51:31
|Author: nicm
|Branch: HEAD
|Tag: (none)
|Log:
|Change so that an empty session name always means the current sessions
|even if given with, for example, -t '', and explicitly forbid empty
|session names and those containing a : when they are created.
|Date: 2011/04/05 20:37:01
|Author: nicm
|Branch: HEAD
|Tag: (none)
|Log:
|Add a flag to cmd_find_session so that attach-session can prefer
|unattached sessions when choosing the most recently used (if -t is not
|given). Suggested by claudio@.
|Date: 2011/03/29 20:30:16
|Author: nicm
|Branch: HEAD
|Tag: (none)
|Log:
|Change -t on display-message to be target-pane for the #[A-Z]
|replacements and add -c as target-client.
|Date: 2011/03/27 21:31:25
|Author: nicm
|Branch: HEAD
|Tag: (none)
|Log:
|Don't include meta twice when working out the flags to output for
|xterm-style keys - bit 3 is accepted on input but not on output. Also a
|style nit in the header.
Date: 2011/03/27 21:27:26
Author: nicm
Branch: HEAD
Tag: (none)
Log:
Give each pane created in a tmux server a unique id (starting from 0),
put it in the TMUX_PANE environment variable and accept it as a
target. Suggested by and with testing and tweaks from Ben Boeckel.
Support passing through escape sequences to the underlying terminal by
using DCS with a "tmux;" prefix. Escape characters in the sequences must
be doubled. For example:
$ printf '\033Ptmux;\033\033]12;red\007\033\\'
Will pass \033]12;red\007 to the terminal (and change the cursor colour
in xterm). From Kevin Goodsell.
using DCS with a "tmux;" prefix. Escape characters in the sequences must
be doubled. For example:
$ printf '\033Ptmux;\033\033]12;red\007\033\\'
Will pass \033]12;red\007 to the terminal (and change the cursor colour
in xterm). From Kevin Goodsell.
Simplify the way jobs work and drop the persist type, so all jobs are
fire-and-forget.
Status jobs now managed with two trees of output (new and old), rather
than storing the output in the jobs themselves. When the status line is
processed any jobs which don't appear in the new tree are started and
the output from the old tree displayed. When a job finishes it updates
the new tree with its output and that is used for any subsequent
redraws. When the status interval expires, the new tree is moved to the
old so that all jobs are run again.
This fixes the "#(echo %H:%M:%S)" problem which would lead to thousands
of identical persistent jobs and high memory use (this can still be
achieved by adding "sleep 30" but that is much less likely to happen by
accident).
fire-and-forget.
Status jobs now managed with two trees of output (new and old), rather
than storing the output in the jobs themselves. When the status line is
processed any jobs which don't appear in the new tree are started and
the output from the old tree displayed. When a job finishes it updates
the new tree with its output and that is used for any subsequent
redraws. When the status interval expires, the new tree is moved to the
old so that all jobs are run again.
This fixes the "#(echo %H:%M:%S)" problem which would lead to thousands
of identical persistent jobs and high memory use (this can still be
achieved by adding "sleep 30" but that is much less likely to happen by
accident).
Move all calls to fcntl(...O_NONBLOCK) into a function and clear the
flag on the stdio file descriptors before closing them (fixes things
like "tmux ls && cat").
Clean up and simplify tmux command argument parsing.
Originally, tmux commands were parsed in the client process into a
struct with the command data which was then serialised and sent to the
server to be executed. The parsing was later moved into the server (an
argv was sent from the client), but the parse step and intermediate
struct was kept.
This change removes that struct and the separate parse step. Argument
parsing and printing is now common to all commands (in arguments.c) with
each command left with just an optional check function (to validate the
arguments at parse time), the exec function and a function to set up any
key bindings (renamed from the old init function).
This is overall more simple and consistent.
There should be no changes to any commands behaviour or syntax although
as this touches every command please watch for any unexpected changes.
Support for UTF-8 mouse input (\033[1005h). This was added in xterm 262
and supports larger terminals than the older way.
If the new mouse-utf8 option is on, UTF-8 mouse input is enabled for all
UTF-8 terminals. The option defaults to on if LANG etc are set in the
same manner as the utf8 option.
With help and based on code from hsim at gmx.li.
Originally, tmux commands were parsed in the client process into a
struct with the command data which was then serialised and sent to the
server to be executed. The parsing was later moved into the server (an
argv was sent from the client), but the parse step and intermediate
struct was kept.
This change removes that struct and the separate parse step. Argument
parsing and printing is now common to all commands (in arguments.c) with
each command left with just an optional check function (to validate the
arguments at parse time), the exec function and a function to set up any
key bindings (renamed from the old init function).
This is overall more simple and consistent.
There should be no changes to any commands behaviour or syntax although
as this touches every command please watch for any unexpected changes.
Move the user-visible parts of all options (names, types, limit, default
values) together into one set of tables in options-table.c. Also clean
up and simplify cmd-set-options.c and move a common print function into
option-table.c.
and supports larger terminals than the older way.
If the new mouse-utf8 option is on, UTF-8 mouse input is enabled for all
UTF-8 terminals. The option defaults to on if LANG etc are set in the
same manner as the utf8 option.
With help and based on code from hsim at gmx.li.
Don't reset the activity timer for unattached sessions every second,
this screws up the choice of most-recently-used. Instead, break the time
update into a little function and do it when the session is attached.
Pointed out by joshe@.
values) together into one set of tables in options-table.c. Also clean
up and simplify cmd-set-options.c and move a common print function into
option-table.c.
this screws up the choice of most-recently-used. Instead, break the time
update into a little function and do it when the session is attached.
Pointed out by joshe@.
Store sessions in an RB tree by name rather than a list, this is tidier
and allows them to easily be shown sorted in various lists
(list-sessions/choose-sessions).
Keep a session index which is used in a couple of places internally but
make it an ever-increasing number rather than filling in gaps with new
sessions.
Unify the way sessions are used by callbacks - store the address and use
the reference count, then check it is still on the global sessions list
in the callback.
and allows them to easily be shown sorted in various lists
(list-sessions/choose-sessions).
Keep a session index which is used in a couple of places internally but
make it an ever-increasing number rather than filling in gaps with new
sessions.
Date: 2010/11/22 21:13:13
Author: nicm
Branch: HEAD
Tag: (none)
Log:
There is somewhere that WINDOW_HIDDEN is getting set when it shouldn't
be and I can't find it, but the flag itself is a useless optimisation
that only applies to automatic-resize windows, so just dispose of it
entirely.
Fixes problems reported by Nicholas Riley.
Members:
resize.c:1.5->1.6
tmux.h:1.246->1.247
tty.c:1.92->1.93
|PatchSet 781
|Date: 2010/10/29 21:11:57
|Author: nicm
|Branch: HEAD
|Tag: (none)
|Log:
|We now send argv to the server after parsing it in the client to get the
|command, so the client should not modify it. Instead, take a copy. Fixes
|parsing command lists, reported by mcbride@.
|
|Members:
| cmd-list.c:1.5->1.6
| cmd.c:1.45->1.46
| tmux.h:1.244->1.245
be and I can't find it, but the flag itself is a useless optimisation
that only applies to automatic-resize windows, so just dispose of it
entirely.
Fixes problems reported by Nicholas Riley.
Two new options:
- server option "exit-unattached" makes the server exit when no clients
are attached, even if sessions are present;
- session option "destroy-unattached" destroys a session once no clients
are attached to it.
These are useful for preventing tmux remaining in the background where
it is undesirable and when using tmux as a login shell to keep a limit
on new sessions.
- server option "exit-unattached" makes the server exit when no clients
are attached, even if sessions are present;
- session option "destroy-unattached" destroys a session once no clients
are attached to it.
These are useful for preventing tmux remaining in the background where
it is undesirable and when using tmux as a login shell to keep a limit
on new sessions.
Use UTF-8 line drawing characters on UTF-8 terminals. Fixes some stupid
terminals (I'm looking at you, putty) which disable the vt100 ACS mode
switching sequences in UTF-8 mode.
Also on terminals without ACS at all, use ASCII equivalents where
obvious.
terminals (I'm looking at you, putty) which disable the vt100 ACS mode
switching sequences in UTF-8 mode.
Also on terminals without ACS at all, use ASCII equivalents where
obvious.
Add -n and -p flags to switch-client to move to the next and previous
session (yes, it doesn't match window/pane, but so what, nor does
switch-client).
Based on a diff long ago from "edsouza".
Do not call event_del() for signals after fork(), just use sigaction()
directly instead - calling libevent functions after fork() w/o
event_reinit() is a bad idea, even if in this case it was harmless.
Change the way backoff works. Instead of stopping reading from the pty
when the client tty backs up too much, just stop updating the tty and
only update the internal screen. Then when the tty recovers, force a
redraw.
This prevents a dodgy client from causing other clients to go into
backoff while still allowing tmux to be responsive (locally) when seeing
lots of output.
when the client tty backs up too much, just stop updating the tty and
only update the internal screen. Then when the tty recovers, force a
redraw.
This prevents a dodgy client from causing other clients to go into
backoff while still allowing tmux to be responsive (locally) when seeing
lots of output.
When changing so that the client passes its stdout and stderr as well as
stdin up to the server, I forgot one essential point - the tmux server
could now be both the producer and consumer. This happens when tmux is
run inside tmux, as well as when piping tmux commands together.
So, using stdio(3) was a bad idea - if sufficient data was written, this
could block in write(2). When that happened and the server was both
producer and consumer, it deadlocks.
Change to use libevent bufferevents for the client stdin, stdout and
stderr instead. This is trivial enough for output but requires a
callback mechanism to trigger when stdin is finished.
This relies on the underlying polling mechanism for libevent to work
with whatever devices to which the user could redirect stdin, stdout or
stderr, hence the change to use poll(2) over kqueue(2) for tmux.
stdin up to the server, I forgot one essential point - the tmux server
could now be both the producer and consumer. This happens when tmux is
run inside tmux, as well as when piping tmux commands together.
So, using stdio(3) was a bad idea - if sufficient data was written, this
could block in write(2). When that happened and the server was both
producer and consumer, it deadlocks.
Change to use libevent bufferevents for the client stdin, stdout and
stderr instead. This is trivial enough for output but requires a
callback mechanism to trigger when stdin is finished.
This relies on the underlying polling mechanism for libevent to work
with whatever devices to which the user could redirect stdin, stdout or
stderr, hence the change to use poll(2) over kqueue(2) for tmux.
Return the command client return code with MSG_EXIT now that MSG_ERROR and
MSG_PRINT are unused.
New clients should be compatible with old tmux servers but vice versa may print
an error.
Custom layouts. list-windows command displays the layout as a string (such as
"bb62,159x48,0,0{79x48,0,0,79x48,80,0}") and it can be applied to another
window (with the same number of panes or fewer) using select-layout.
Send all three of stdin, stdout, stderr from the client to the server, so that
commands can directly make use of them. This means that load-buffer and
save-buffer can have "-" as the file to read from stdin or write to stdout.
This is a protocol version bump so the tmux server will need to be restarted
after upgrade (or an older client used).
Store the current working directory in the session, change the default-path
option to default to empty and make that mean that the stored session CWD is
used.
Setting the cmdlist pointer in the bind-key to NULL to prevent it being freed
after the command is executing is bogus because it may still be needed if the
same command is going to be executed again (for example if you "bind-key a
bind-key b ..."). Making a copy is hard, so instead add a reference count to
the cmd_list.
While here, also print bind-key -n and the rest of the flags properly.
Fixes problem reported by mcbride@.
commands can directly make use of them. This means that load-buffer and
save-buffer can have "-" as the file to read from stdin or write to stdout.
This is a protocol version bump so the tmux server will need to be restarted
after upgrade (or an older client used).
after the command is executing is bogus because it may still be needed if the
same command is going to be executed again (for example if you "bind-key a
bind-key b ..."). Making a copy is hard, so instead add a reference count to
the cmd_list.
While here, also print bind-key -n and the rest of the flags properly.
Fixes problem reported by mcbride@.
Fix problems with window sizing seen by Raghavendra D Prabhu when
starting tmux from .xinitrc.
One of the very few things the server relies on the client for now is to
pass through a message on SIGWINCH, but there is a condition where
potentially a SIGWINCH may be lost during the transition from unattached
(main.c) to attached (client.c). So trigger a size change immediately
after the client installs its SIGWINCH handler.
Also, when the terminal is resized, reset the scroll region and cursor
position. Previously, we were clearing our saved idea of these, but in
fact some terminals do not reset them on resize, so this caused problems
during redraw.
While here make a resize to the same size not cause a redraw and rename
the tmux.out output log file to include the tmux PID.
When the mode-mouse option is on, support dragging to make a selection
in copy mode.
Also support the scroll wheel, although xterm strangely does not ignore
it in application mouse mode, causing redraw artifacts when scrolling up
(other terminals appear to be better behaved).
starting tmux from .xinitrc.
One of the very few things the server relies on the client for now is to
pass through a message on SIGWINCH, but there is a condition where
potentially a SIGWINCH may be lost during the transition from unattached
(main.c) to attached (client.c). So trigger a size change immediately
after the client installs its SIGWINCH handler.
Also, when the terminal is resized, reset the scroll region and cursor
position. Previously, we were clearing our saved idea of these, but in
fact some terminals do not reset them on resize, so this caused problems
during redraw.
While here make a resize to the same size not cause a redraw and rename
the tmux.out output log file to include the tmux PID.
in copy mode.
Also support the scroll wheel, although xterm strangely does not ignore
it in application mouse mode, causing redraw artifacts when scrolling up
(other terminals appear to be better behaved).
function. We were only ever using the client to find the session anyway.
This allows send-key to work properly for manipulating copy mode from
outside tmux.
From Micah Cowan.
Identical behaviour to select-prompt can now be obtained with
command-prompt, so remove select-prompt and change ' to be bound to
command-prompt -p index "select-window -t :%%".
Make signal handler setup/teardown two common functions instead of six,
and reset SIGCHLD after fork to fix problems with some shells. From
Romain Francoise.
Permit keys in copy mode to be prefixed by a repeat count, entered with
[1-9] in vi mode, or M-[1-9] in emacs mode.
From Micah Cowan, tweaked a little by me.
copy mode uses the real screen as backing and if it is updated while copying,
strange things can happen. So, freeze reading from the pty while in copy mode.
Instead of bailing out on the first configuration file error, carry on,
collecting all the errors, then start with the active window in more mode
displaying them.
vi-style B, W and E keys in copy mode to navigate between words treating only
spaces as word separators. Also add . to the list of word separators for
standard word navigation.
From Micah Cowan, tweaked slightly by me.
Add "server options" which are server-wide and not bound to a session or
window. Set and displayed with "set -s" and "show -s".
Currently the only option is "quiet" (like command-line -q, allowing it to be
set from .tmux.conf), but others will come along.
window. Set and displayed with "set -s" and "show -s".
Currently the only option is "quiet" (like command-line -q, allowing it to be
set from .tmux.conf), but others will come along.
Massive spaces->tabs and trailing whitespace cleanup, hopefully for the last
time now I've configured emacs to make them displayed in really annoying
colours...
Eliminate duplicate code and ease the passage for server-wide options by adding
a -w flag to set-option and show-options and making setw and showw aliases to
set -w and show -w.
Note: setw and showw are still there, but now aliases for set -w and show -w.
a -w flag to set-option and show-options and making setw and showw aliases to
set -w and show -w.
Note: setw and showw are still there, but now aliases for set -w and show -w.
Change status line drawing to create the window list in a separate screen and
then copy it into the status line screen. This allows UTF-8 in window names and
fixes some problems with #[] in window-status-format.
Two new options, window-status-format and window-status-current-format, which
allow the format of each window in the status line window list to be controlled
using similar # sequences as status-left/right.
This diff also moves part of the way towards UTF-8 support in window names but
it isn't quite there yet.
Cleanup by moving various (mostly horrible) little bits handling UTF-8 grid
data into functions in a new file, grid-utf8.c, and use sizeof intead of
UTF8_DATA.
Also nuke trailing whitespace from tmux.1, reminded by jmc.
Add a per-client log of status line messages displayed while that client
exists. A new message-limit session option sets the maximum number of entries
and a command, show-messages, shows the log (bound to ~ by default).
This (and prompt history) might be better as a single global log but until
there are global options it is easier for them to be per client.
allow the format of each window in the status line window list to be controlled
using similar # sequences as status-left/right.
This diff also moves part of the way towards UTF-8 support in window names but
it isn't quite there yet.
exists. A new message-limit session option sets the maximum number of entries
and a command, show-messages, shows the log (bound to ~ by default).
This (and prompt history) might be better as a single global log but until
there are global options it is easier for them to be per client.
Switch the tty key tree over to an (unbalanced) ternary tree which allows
partial matches to be done (they wait for further data or a timer to expire,
like a naked escape).
Mouse and xterm-style keys still expect to be atomic.
Switch tty key input over to happen on a read event. This is a bit more
complicated because of escape input, but in that case instead of processing a
key immediately, schedule a timer and reprocess the bufer when it expires.
This currently assumes that keys will be atomic (ie that if eg F1 is pressed
the entire sequence is present in the buffer). This is usually but not always
true, a change in the tree format so it can differentiate potential (partial)
key sequences will happens soon and will allow this to be fixed.
Convert the window pane (pty master side) fd over to use a bufferevent.
The evbuffer API is very similar to the existing tmux buffer API so this was
remarkably painless. Not many possible ways to do it, I suppose.
Initial changes to move tmux to libevent.
This moves the client-side loops are pretty much fully over to event-based only
(tmux.c and client.c) but server-side (server.c and friends) treats libevent as
a sort of clever poll, waking up after every event to run various things.
Moving the server stuff over to bufferevents and timers and so on will come
later.
partial matches to be done (they wait for further data or a timer to expire,
like a naked escape).
Mouse and xterm-style keys still expect to be atomic.
complicated because of escape input, but in that case instead of processing a
key immediately, schedule a timer and reprocess the bufer when it expires.
This currently assumes that keys will be atomic (ie that if eg F1 is pressed
the entire sequence is present in the buffer). This is usually but not always
true, a change in the tree format so it can differentiate potential (partial)
key sequences will happens soon and will allow this to be fixed.
Add an activity time for clients, like for sessions, and change session and
client lookup to pick the most recently used rather than the most recently
created - this is much more useful when used interactively and (because the
activity time is set at creation) should have no effect on source-file.
Based on a problem reported by Jan Johansson.
If it isn't available explicitly, work out the current client in a similar way
to the current session - build a list of the possibilities then pick the
newest.
Change session and client activity and creation time members to have more
meaningful names.
Also, remove the code to try and update the session activity time for the
command client when a command message is received as is pointless because it
des not have a session.
Double the escape timer (the time after a \033 is received before tmux gives up
waiting to see if it is part of a key sequence and passes it through) to 500
ms, the previous setting was too fast. Suggested by naddy.
