nicm
bba588752f
Store state shared between multiple commands in the queue in a shared
...
structure.
2017-04-21 14:01:19 +00:00
Thomas Adam
69e0f28333
Merge branch 'obsd-master'
2017-04-20 18:01:12 +01:00
nicm
51a0dbb172
Only set up a current target for mouse key bindings. Fixes:
...
bind q select-pane -U \; resize-pane -Z
(There is still some possible weirdness with the way we do current
targets, it should probably be done in a different way at some point.)
2017-04-20 15:16:20 +00:00
Thomas Adam
5a551ac57f
Merge branch 'obsd-master'
2017-04-19 16:01:14 +01:00
nicm
53fde21bb8
Add a suspend helper function, and do not allow detaching or suspending
...
while already doing so.
2017-04-19 14:00:28 +00:00
Thomas Adam
85af9c9c9d
Merge branch 'obsd-master'
2017-04-19 10:01:12 +01:00
nicm
fa6deb5866
When the data we have buffered to write to a terminal grows beyond a
...
reasonable amount (currently width * height * 8 bytes), discard all
output to the terminal and start trying to redraw periodically
instead. Continue with this until the amount of data we are trying to
write falls to a low level again.
This helps to prevent tmux sitting on a huge buffer of data when there
are processes with fast output running inside tmux but the outside
terminal is slow.
A new client_discarded format holds the amount of data that has been
discarded due to this mechanism.
The three variables (when to start this, when to stop, and how often to
redraw) are basically "works for me" at the moment, this is going in to
see how it goes and if it causes problems for anyone else.
2017-04-19 06:52:27 +00:00
Thomas Adam
a71c262d5f
Merge branch 'obsd-master'
2017-04-19 00:01:15 +01:00
nicm
8c8ce08d79
On terminals without DECSLRM, when a pane that is less than the full
...
with of the terminal scrolls, tmux needs to redraw the entire pane. This
results in a large amount of output data which can cause slow terminals
to struggle, particularly when many lines are scrolled together quickly.
This can be reduced by only redrawing when tmux doesn't hold any
buffered data for the terminal. If a redraw is required and data is
buffered, the redraw is deferred until all that data is consumed (it is
checked after every event loop, a timer is used to ensure this happens
at some point). While a redraw is pending, no additional data will be
written to the terminal.
The redraw still happens, now it is just pushed back if it is possible
it would just add more data on top of a terminal that is already
behind. This both gives the terminal a chance to catch up, and allows
tmux to process more scrolling (that would require additional redraws)
in the meantime.
Helps with a problem reported by Greg Hurrell.
2017-04-18 20:37:49 +00:00
Thomas Adam
28833efb48
Merge branch 'obsd-master'
2017-04-17 10:01:13 +01:00
nicm
7461c165b5
Remove a couple of redraw flags that no longer have any effect.
2017-04-17 06:40:32 +00:00
Thomas Adam
5f662d91db
Merge branch 'obsd-master'
...
Conflicts:
server-client.c
tmux.1
2017-04-06 11:10:17 +01:00
nicm
9b28200578
Give each client a name. This defaults to the tty name as before but
...
falls back to an alternative if the tty name is not available. This is
clearer than overloading the client ttyname member and allows us to
remove the path stored in the tty struct, it should always be the same
as the client.
2017-04-05 10:49:46 +00:00
Thomas Adam
392253f032
Merge branch 'obsd-master'
2017-03-10 00:01:16 +00:00
nicm
55e73e3612
Clear the bracket paste mode when in the command prompt.
2017-03-09 22:00:46 +00:00
Thomas Adam
c5bdae466e
Merge branch 'obsd-master'
2017-03-09 18:01:16 +00:00
nicm
bce1dee034
Move the client identify (display-panes) code into server-client.c.
2017-03-09 17:06:35 +00:00
Thomas Adam
ba3c1534e0
Merge branch 'obsd-master'
2017-02-14 20:01:12 +00:00
nicm
e340df2034
Make source-file look for files relative to the client working directory
...
(like load-buffer and save-buffer), from Chris Pickel. Also break the
where-is-this-file code out into its own function for loadb and saveb.
2017-02-14 18:13:05 +00:00
Thomas Adam
96ad1d7779
Merge branch 'obsd-master'
2017-02-09 14:01:18 +00:00
nicm
b1fa3e25e4
Break the message storage function into its own function, useful for
...
debugging.
2017-02-09 12:09:33 +00:00
Thomas Adam
130b77edc7
Merge branch 'obsd-master'
2017-02-08 18:01:17 +00:00
nicm
7475165cd8
Some other tidying bits.
2017-02-08 15:49:29 +00:00
Thomas Adam
6c333cc486
Merge branch 'obsd-master'
2017-02-03 14:01:13 +00:00
nicm
7d23d019c0
Add a window or pane id "tag" to each format tree and use it to separate
...
jobs, this means that if the same job is used for different windows or
panes (for example in pane-border-format), it will be run separately for
each pane.
2017-02-03 11:57:27 +00:00
Thomas Adam
9b1f620aa0
Merge branch 'obsd-master'
2017-02-01 12:01:18 +00:00
nicm
dd0c814779
Implement "all event" (1003) mouse mode but in a way that works. The
...
main issue is that if we have two panes, A with 1002 and B with 1003, we
need to set 1003 outside tmux in order to get all the mouse events, but
then we need to suppress the ones that pane A doesn't want. This is easy
in SGR mouse mode, because buttons == 3 is only used for movement events
(for other events the trailing m/M marks a release instead), but in
normal mouse mode we can't tell so easily. So for that, look at the
previous event instead - if it is drag+release as well, then the current
event is a movement event.
2017-02-01 09:55:07 +00:00
Thomas Adam
780dd7ac82
Merge branch 'obsd-master'
2017-01-13 14:01:13 +00:00
Thomas Adam
2311bbd28a
Merge branch 'obsd-master'
2017-01-13 12:01:12 +00:00
nicm
22a528905d
Make options_get_string return const string.
2017-01-13 11:56:43 +00:00
nicm
95950bf668
Add -E to detach-client to exec a command to replace the client instead
...
of exiting it, useful if tmux wasn't exec'd itself. From Jenna Magius.
2017-01-13 10:12:12 +00:00
Thomas Adam
33ebb9ec39
Merge branch 'obsd-master'
2017-01-12 00:01:13 +00:00
nicm
3bb14001b9
Add some missing special keys to key_string_lookup_key, fix a mouse
...
check in server_client_handle_key, and tweak a comment.
2017-01-11 22:36:07 +00:00
Thomas Adam
b9fa8f12d7
Merge branch 'obsd-master'
2016-12-07 10:01:12 +00:00
nicm
a8f3ad4487
Make prefix work in all tables (except the prefix table). Users who want
...
to avoid this can set prefix to "none" and bind send-prefix
themselves. Allows C-b t be bound in the copy mode tables again, pointed
out by millert@.
2016-12-07 09:16:13 +00:00
Thomas Adam
2864a31311
Merge branch 'obsd-master'
2016-11-24 20:01:10 +00:00
nicm
6f8cedb1bc
The mouse valid flag needs to be correct before we fire the dragging
...
callback, so move the callback outside of server_client_check_mouse and
use a new special key code to indicate it.
2016-11-24 18:45:45 +00:00
Thomas Adam
a02d95a313
Merge branch 'obsd-master'
2016-11-24 16:01:11 +00:00
nicm
84319aa8f0
If in the middle of a drag, don't use an invalid key, just use
...
KEYC_MOUSE as a placeholder. Reported by Artem Fokin.
2016-11-24 14:38:55 +00:00
nicm
0d1be2e328
Fix so that we work out the right pane from mouse events - we were doing
...
so too early, before the mouse event was necessarily valid, so could end
up using the pane from the previous mouse event, or the active pane.
It is important that we use the right pane now that different panes can
have different key tables (for copy mode).
Fixes problem reported by Greg Hurrell.
2016-11-24 13:46:50 +00:00
Thomas Adam
8a8001350d
Merge branch 'obsd-master'
2016-11-23 18:01:19 +00:00
nicm
6de466cf8b
For mouse keys, use the mouse pane as the default current pane.
2016-11-23 17:01:24 +00:00
Thomas Adam
06fd3b00ff
Merge branch 'obsd-master'
2016-11-16 12:01:11 +00:00
nicm
81f1d625af
Do not stop dragging when the wheel is pressed, from Artem Fokin.
2016-11-16 11:37:16 +00:00
Thomas Adam
1afe9e98de
Merge branch 'obsd-master'
2016-11-15 16:01:10 +00:00
nicm
c34a79b152
Turn on margins, with a couple of fixes (only limit to the pane for line
...
feeds, and do not move cursor to end for full width panes).
2016-11-15 15:17:28 +00:00
nicm
0ace779cde
Initial attempt to make use of left and right margins if the terminal
...
supports them (that is, if it advertises itself as a VT420 - probably
just xterm). These are the vertical equivalent of the scroll region and
allow much faster scrolling of panes that do not take up the full width
of the terminal.
2016-11-15 14:02:32 +00:00
Thomas Adam
28a31201d3
Merge branch 'obsd-master'
2016-10-19 12:01:11 +01:00
nicm
899e629bf0
Alerts are too slow, so rather than walking all sessions and windows,
...
add a link of winlinks to each window and a pointer to the session to
each winlink. Also rewrite the alerts processing to return to the old
behaviour (alert in any window sets the flag on any winlink).
2016-10-19 09:22:07 +00:00
Thomas Adam
d54e990c4f
Merge branch 'obsd-master'
2016-10-17 00:01:11 +01:00
nicm
41e633acf5
Use the notify name string instead of going via an enum and change
...
existing hooks to use notifys instead.
2016-10-16 22:06:40 +00:00
Thomas Adam
1a6e696b08
Merge branch 'obsd-master'
2016-10-16 22:01:14 +01:00
nicm
b342bd0b46
Mass rename struct cmd_q to struct cmdq_item and related.
2016-10-16 19:04:05 +00:00
Thomas Adam
c67b702588
Merge branch 'obsd-master'
2016-10-16 20:01:10 +01:00
nicm
ddc4512d2e
Rewrite command queue handling. Each client still has a command queue,
...
but there is also now a global command queue. Instead of command queues
being dispatched on demand from wherever the command happens to be
added, they are now all dispatched from the top level server
loop. Command queues may now also include callbacks as well as commands,
and items may be inserted after the current command as well as at the end.
This all makes command queues significantly more predictable and easier
to use, and avoids the complex multiple nested command queues used by
source-file, if-shell and friends.
A mass rename of struct cmdq to a better name (cmdq_item probably) is
coming.
2016-10-16 17:55:14 +00:00
Thomas Adam
6551f4bb3b
Merge branch 'obsd-master'
...
Conflicts:
paste.c
2016-10-13 08:09:47 +01:00
nicm
68bebe1fb7
The repeat prompt in both emacs and vi (and the old one in tmux) doesn't
...
support line editing and instead executes a command as soon as a
non-number key is pressed. Add a -N flag to command-prompt for the same
in copy mode. Reported by Theo Buehler.
2016-10-12 13:03:27 +00:00
Thomas Adam
b9dc855016
Merge branch 'obsd-master'
...
Conflicts:
format.c
osdep-openbsd.c
2016-10-12 09:45:49 +01:00
nicm
85d7afaefc
Support double and triple clicks (they are cumulative, so double is
...
fired then triple), and use for select-word and select-line in copy
mode. Inspired by a different solution from Omar Sandoval.
2016-10-11 09:30:36 +00:00
nicm
76d6d3641f
Fundamental change to how copy mode key bindings work:
...
The vi-copy and emacs-copy mode key tables are gone, and instead copy
mode commands are bound in one of two normal key tables ("copy-mode" or
"copy-mode-vi"). Keys are bound to "send-keys -X copy-mode-command". So:
bind -temacs-copy C-Up scroll-up
bind -temacs-copy -R5 WheelUpPane scroll-up
Becomes:
bind -Tcopy-mode C-Up send -X scroll-up
bind -Tcopy-mode WheelUpPane send -N5 -X scroll-up
This allows the full command parser and command set to be used - for
example, we can use the normal command prompt for searching, jumping,
and so on instead of a custom one:
bind -Tcopy-mode C-r command-prompt -p'search up' "send -X search-backward '%%'"
command-prompt also gets a -1 option to only require on key press, which
is needed for jumping.
The plan is to get rid of mode keys entirely, so more to come eventually.
2016-10-11 07:23:34 +00:00
nicm
c426e485e5
Loads more static, except for cmd-*.c and window-*.c.
2016-10-10 21:29:23 +00:00
Thomas Adam
215d3f8c0d
Merge branch 'obsd-master'
2016-10-09 18:01:10 +01:00
nicm
b8f2dd8237
Make the CLIENT_STATUS flag imply that pane status lines are redrawn if
...
they are enabled and break the actual screen generation code into a
separate function. Fixes problems reported by Romain Francoise.
2016-10-09 16:24:34 +00:00
Thomas Adam
27591570c4
Merge branch 'obsd-master'
2016-09-28 10:01:11 +01:00
nicm
acacb718e5
Rate limit TIOCSWINSZ on a timer to avoid programs getting hammered with
...
SIGWINCH when the size changes rapidly. To help a problem reported by
Rui Pinheiro.
2016-09-28 08:30:44 +00:00
Thomas Adam
93f42d360b
Merge branch 'obsd-master'
2016-06-16 14:01:11 +01:00
nicm
325cbe90d9
Allow a command to be specified to display-panes, similar to
...
command-prompt, rather than always just selecting the pane.
2016-06-16 10:55:47 +00:00
Thomas Adam
fe4ef307b7
Merge branch 'obsd-master'
2016-05-01 14:01:12 +01:00
nicm
88bd5b15ff
tty_client_ready can not be internal to tty.c again.
2016-04-30 18:59:02 +00:00
Thomas Adam
55d472a9fe
Merge branch 'obsd-master'
2016-04-29 18:01:09 +01:00
nicm
0509be0740
Add option to include status text in the pane borders. If
...
pane-border-status is set to "top" or "bottom" (rather than "off"),
every pane has a permanent top or bottom border containing the text from
pane-border-format.
Based on a diff sent long ago by Jonathan Slenders, mostly rewritten and
simplified by me.
2016-04-29 15:00:48 +00:00
Thomas Adam
7a02910feb
Merge branch 'obsd-master'
2016-04-28 10:01:10 +01:00
nicm
36976ce5e6
After unlock, Update activity time after recalculate_sizes() so that the
...
session attached flag is correct.
2016-04-28 06:51:56 +00:00
Thomas Adam
ed598e9fe1
Merge branch 'obsd-master'
2016-03-18 08:01:18 +00:00
nicm
fa97b0a95b
Instead of reusing MouseUp at the finish of a drag, add a new key
...
MouseDragEnd. It can be useful to bind them separately in copy mode.
2016-03-18 07:28:27 +00:00
Thomas Adam
e304673c65
Merge branch 'obsd-master'
...
Conflicts:
utf8.c
2016-03-02 18:10:51 +00:00
nicm
54ea8f74ae
When a mouse drag is finished, fire a MouseUp key press, instead of
...
doing the drag end in code. From Stephen Coakley.
2016-03-01 12:04:43 +00:00
Thomas Adam
dc42c35f1f
Merge branch 'obsd-master'
2016-01-19 18:01:15 +00:00
nicm
995af0e2b7
I no longer use my SourceForge address so replace it.
2016-01-19 15:59:12 +00:00
Nicholas Marriott
83c96d2685
No need to set cwd on Cygwin now, from Yuya Adachi.
2015-12-20 11:25:13 +00:00
Thomas Adam
e0cae08c04
Merge branch 'obsd-master'
2015-12-17 00:01:08 +00:00
nicm
021c64310d
Add infrastructure to work out the best target given a pane or window
...
alone and use it to add pane_died and pane_exited hooks.
2015-12-16 21:50:37 +00:00
Thomas Adam
e5caf64815
Merge branch 'obsd-master'
2015-12-15 14:01:12 +00:00
nicm
ac9778395f
Some hooks API changes to fire a hook while waiting another cmdq and
...
infrastructure that will be needed soon.
2015-12-15 13:43:07 +00:00
Thomas Adam
845a664bb2
Merge branch 'obsd-master'
2015-12-12 20:01:15 +00:00
nicm
5ed17e84fa
Add key-table option to set the default key table for a session, allows
...
different key bindings for different sessions and a few other things.
2015-12-12 18:32:24 +00:00
nicm
39cf9c9d31
Allow prefix and prefix2 to be set to None to disable (useful if you
...
would rather bind the prefix in the root table).
2015-12-12 18:19:00 +00:00
Thomas Adam
4909a70174
Merge branch 'obsd-master'
2015-12-11 13:24:45 +00:00
nicm
01831da5f5
Add cmdq as an argument to format_create and add a format for the
...
command name (will also be used for more later).
2015-12-11 12:27:36 +00:00
Thomas Adam
af8134a6ff
Merge branch 'obsd-master'
2015-12-08 10:01:16 +00:00
nicm
e0f26dcda3
Remove format_create_flags and just pass flags to format_create.
2015-12-08 08:34:18 +00:00
Thomas Adam
5862f59ed7
Conflicts:
...
Makefile
2015-12-08 07:11:09 +00:00
nicm
d2fb0efcd1
Add hooks infrastructure, basic commands (set-hook, show-hooks) and a
...
couple of not very useful client hooks. This will eventually let
commands be run at various points and on notifications. Joint work with
Thomas Adam.
2015-12-08 01:10:31 +00:00
Thomas Adam
eb5ee80c74
Merge branch 'obsd-master'
2015-12-01 10:01:13 +00:00
nicm
a785a7f700
Do not deref wp if window_get_active_at returns NULL which can happen on
...
very large terminals, from Michael Graczyk.
2015-12-01 09:41:03 +00:00
Thomas Adam
b642b3c8e3
Merge branch 'obsd-master'
2015-11-23 21:21:12 +00:00
nicm
32e510bd70
Remove support for the UTF-8 mouse extension. This was a briefly used,
...
poor idea that was fairly quickly replaced by SGR mouse input (which is
now widespread). It is impossible to tell the difference between UTF-8
and non-UTF-8 mouse input; since the mouse-utf8 option was removed tmux
has not handled it correctly in any case; and it is ridiculous to have
three different forms of mouse input.
2015-11-23 20:53:09 +00:00
Thomas Adam
78a00c845c
Merge branch 'obsd-master'
...
Conflicts:
tmux.h
2015-11-21 14:24:33 +00:00
nicm
374e273df5
Only assume pasting with at least two characters, reduces problems for
...
people who can type ^B c very fast, or who are using tmux inside
something else that buffers.
2015-11-19 22:46:46 +00:00
Thomas Adam
7fe8edc396
Merge branch 'obsd-master'
2015-11-18 16:01:23 +00:00
nicm
577c0e3e5a
Use __unused rather than rolling our own.
2015-11-18 14:27:44 +00:00
Thomas Adam
7b749eff35
Merge branch 'obsd-master'
...
Conflicts:
server.c
tmux.c
2015-11-14 11:38:30 +00:00
nicm
c56b81a2ce
Push stdout and stderr to clients more aggressively, and add an event to
...
continue if the send fails.
2015-11-14 09:41:06 +00:00
Thomas Adam
5f483499f3
Merge branch 'obsd-master'
2015-11-12 12:01:17 +00:00
nicm
69e0b8326a
Support UTF-8 key bindings by expanding the key type from int to
...
uint64_t and converting UTF-8 to Unicode on input and the reverse on
output. (This allows key bindings, there are still omissions - the
largest being that the various prompts do not accept UTF-8.)
2015-11-12 11:05:34 +00:00
Thomas Adam
f2e4aa8d1c
Merge branch 'obsd-master'
2015-11-12 00:01:10 +00:00
nicm
00c34df186
Drop mouse-utf8 option and always turn on UTF-8 mouse if the client says
...
it supports UTF-8.
2015-11-11 23:23:33 +00:00
Thomas Adam
c975de2e07
Merge branch 'obsd-master'
...
Conflicts:
server.c
2015-10-31 23:56:35 +00:00
nicm
abb4e9e2fa
The output log is only useful once and it means creating a file, so open
...
it once at startup instead of in every call to tty_open.
2015-10-31 13:12:03 +00:00
Thomas Adam
17f6c3be8e
Merge branch 'obsd-master'
2015-10-31 10:01:12 +00:00
nicm
01defc9f49
Because pledge(2) does not allow us to pass directory file descriptors
...
around, we can't use file descriptors for the working directory because
we will be unable to pass it to a privileged process to tell it where to
read or write files or spawn children. So move tmux back to using
strings for the current working directory. We try to check it exists
with access() when it is set but ultimately fall back to ~ if it fails
at time of use (or / if that fails too).
2015-10-31 08:13:58 +00:00
Thomas Adam
a5e4d3a2d8
Merge branch 'obsd-master'
2015-10-28 12:01:11 +00:00
nicm
bf9c933cae
Like options, move the environ struct into environ.c.
2015-10-28 09:51:55 +00:00
Thomas Adam
da1f6fc2c8
Merge branch 'obsd-master'
...
Conflicts:
Makefile
client.c
server-client.c
server.c
tmux.c
tmux.h
2015-10-27 23:27:26 +00:00
nicm
44657bf932
Move struct options into options.c.
2015-10-27 15:58:42 +00:00
nicm
07b0ea03c3
Break the common process set up, event loop and imsg dispatch code
...
between server and client out into a separate internal API. This will
make it easier to add another process.
2015-10-27 13:23:24 +00:00
Thomas Adam
9c69a79f9a
Merge branch 'obsd-master'
2015-10-27 00:01:09 +00:00
nicm
640c6fdd5f
If a mouse event has no key binding, pass it through to the pane it
...
happened in, not the active pane like normal key presses. Fixes problems
seen by Enrico Ghirardi.
2015-10-26 23:16:18 +00:00
Thomas Adam
54a3ed751e
Merge branch 'obsd-master'
2015-10-26 18:01:12 +00:00
nicm
a22fe33aa0
Some extra logging of where keys are actually going.
2015-10-26 17:17:06 +00:00
Thomas Adam
4acc8d0ff5
Merge branch 'obsd-master'
...
Conflicts:
cmd-find.c
2015-10-25 09:21:37 +00:00
nicm
2e2b8a95bd
Pasting mouse escape sequences is unlikely, so skip them when working
...
out whether the user is pasting.
2015-10-23 23:46:36 +00:00
Thomas Adam
8c39813665
Merge branch 'obsd-master'
2015-10-22 14:01:12 +01:00
nicm
c2c2d44c72
Log identify messages.
2015-10-22 11:00:51 +00:00
Thomas Adam
1f4a5b5dfe
Merge branch 'obsd-master'
2015-10-21 00:01:19 +01:00
nicm
076034345a
Use client pointer not file descriptor in logging.
2015-10-20 21:12:08 +00:00
Thomas Adam
af2d48f4d2
Merge branch 'obsd-master'
2015-10-20 16:01:11 +01:00
nicm
8c8cddbe02
The table could change when retrying so don't save it at start of
...
server_client_handle_key.
2015-10-20 14:19:27 +00:00
Thomas Adam
bbdc08780c
Merge branch 'obsd-master'
2015-10-18 22:01:08 +01:00
nicm
174a2ad731
Pass current directory as a string rather than a file descriptor because
...
pledge doesn't let us pass directory file descriptors.
2015-10-18 20:42:42 +00:00
Thomas Adam
a3bce7a322
Merge branch 'obsd-master'
2015-09-17 00:01:08 +01:00
nicm
a4b4b29987
Rename cmd_q dead flag to a general flags bitmask (will be more flags later).
2015-09-16 22:24:54 +00:00
Thomas Adam
74b958ecbe
Merge branch 'obsd-master'
...
Conflicts:
Makefile
2015-09-14 12:42:19 +01:00
nicm
16efa84838
Make refresh-client force update of jobs, from Sina Siadat.
2015-09-14 10:25:52 +00:00
Thomas Adam
76688d2040
Merge branch 'obsd-master'
...
Conflicts:
cfg.c
tmux.c
2015-09-06 20:47:50 +01:00
nicm
93b946ee50
Tweak some error messages/comments.
2015-09-01 19:50:09 +00:00
Thomas Adam
cb89f2f2a1
Merge branch 'obsd-master'
...
Conflicts:
Makefile
format.c
2015-08-30 21:44:01 +01:00
nicm
b87dc608d9
Some style nits and dead assignments.
2015-08-30 15:43:40 +00:00
nicm
b9f0571780
We already loop over the windows in server_client_loop, so don't do it
...
again in server_loop just to check names.
2015-08-29 08:54:41 +00:00
Thomas Adam
486421ceff
Merge branch 'obsd-master'
2015-08-28 16:01:09 +01:00
Thomas Adam
84eabb2658
Merge branch 'obsd-master'
2015-08-28 14:01:11 +01:00
nicm
57cc4d45d5
Make session_update_activity more useful and use it in more places.
2015-08-28 13:01:03 +00:00
nicm
75d10058a4
Run status update on a per-client timer at status-interval.
2015-08-28 12:16:28 +00:00
Thomas Adam
73b4d098ce
Merge branch 'obsd-master'
2015-07-29 14:01:09 +01:00
nicm
5ec3621101
status_out and associated data structures are no longer used.
2015-07-29 11:56:02 +00:00
Thomas Adam
b886393042
Merge branch 'obsd-master'
2015-07-17 10:01:09 +01:00
nicm
3192178f15
Initialize client fd to -1 as well, from Bobby Powers.
2015-07-17 06:53:47 +00:00
Thomas Adam
07aef38591
Merge branch 'obsd-master'
2015-07-13 18:01:09 +01:00
nicm
e45d624df2
Fix line endings.
2015-07-13 15:51:31 +00:00
nicm
c7374c31c4
Initialize cwd fd to -1 so that we don't close fd 0 if the client is
...
destroyed before it is changed. Also allow ttyname() to fail. Fixes
problems when running out of file descriptors reported by Bruno Sutic.
2015-07-13 15:49:31 +00:00
Thomas Adam
37005d04a9
Merge branch 'obsd-master'
2015-06-14 12:01:10 +01:00
nicm
29c29e7717
Add a format for client PID (client_pid) and server PID (pid). Diff for
...
client_pid from Thomas Adam.
2015-06-14 10:07:44 +00:00
Thomas Adam
7acc4addb5
Merge branch 'obsd-master'
...
Conflicts:
client.c
tmux.1
tmux.c
2015-06-07 23:42:25 +01:00
nicm
10e90ae01f
Change deref to the more sensible unref, and add a couple I missed before.
2015-06-05 18:06:30 +00:00
nicm
8c93b768e4
Instead of putting dead clients on a list and checking it every loop,
...
use event_once to queue a callback to deal with them. Also dead clients
with references would never actually be freed because the wrap-up
functions (the callback for stdin, or status_prompt_clear) would never
be called. So call them in server_client_lost.
2015-06-05 18:01:12 +00:00
nicm
6b2129696f
Move the nested check from client to server and compare the client tty
...
name to all the pane pty names instead of comparing socket paths. This
means that "new -d" will work without unsetting $TMUX.
2015-06-04 23:27:51 +00:00
Thomas Adam
beffdf6575
Merge branch 'obsd-master'
2015-05-27 16:01:22 +01:00
nicm
379400cfa6
Move the jobs output cache into the formats code so that #() work more
...
generally (for example, again working in set-titles-string).
2015-05-27 13:28:04 +00:00
Thomas Adam
4165ed96f8
Add back __CYGWIN__ block
...
This went missing during the merge from OpenBSD.
2015-05-09 20:03:24 +01:00
Thomas Adam
504b97b6a4
Merge branch 'obsd-master'
...
Conflicts:
tmux.h
2015-05-09 12:52:38 +01:00
nicm
879de25583
Remove some stuff that accidentally ended up here from portable, and
...
remove a little-used debug function.
2015-05-08 15:56:49 +00:00
Thomas Adam
f10d3675f8
Merge branch 'obsd-master'
2015-05-06 10:03:52 +01:00
nicm
33a585c47f
Turn cursor off during redraw, pointed out by George Nachman.
2015-05-06 07:52:06 +00:00
Thomas Adam
72e9ebf2ec
Merge branch 'obsd-master'
2015-04-25 20:45:02 +00:00
nicm
07dfdb974d
Make message log a TAILQ.
2015-04-25 18:33:59 +00:00
Thomas Adam
56e1132db4
Merge branch 'obsd-master'
2015-04-25 10:02:46 +00:00
nicm
aeedb464a6
Convert clients list into a TAILQ.
2015-04-24 23:17:11 +00:00
nicm
8d66f4fba4
Change the windows array into an RB tree and fix some places where we
...
were only looking at the first winlink for a window in a session.
2015-04-22 15:30:11 +00:00
Thomas Adam
0a88377086
Merge branch 'obsd-master'
2015-04-22 10:05:54 +01:00
nicm
4cf4302962
Don't eat the mouse event that triggers a drag end because we may want
...
to pass it on to application inside the pane.
2015-04-21 15:21:41 +00:00
nicm
bded743706
Support for multiple key tables to commands to be bound to sequences of
...
keys. The default key bindings become the "prefix" table and -n the
"root" table. Keys may be bound in new tables with bind -T and
switch-client -T used to specify the table in which the next key should
be looked up. Based on a diff from Keith Amling.
2015-04-20 15:34:56 +00:00
Thomas Adam
b25dc423b0
Merge branch 'obsd-master'
2015-04-20 15:44:27 +01:00
nicm
bf635e7741
Rewrite of tmux mouse support which was a mess. Instead of having
...
options for "mouse-this" and "mouse-that", mouse events may be bound as
keys and there is one option "mouse" that turns on mouse support
entirely (set -g mouse on).
See the new MOUSE SUPPORT section of the man page for description of the
key names and new flags (-t= to specify the pane or window under mouse
as a target, and send-keys -M to pass through a mouse event).
The default builtin bindings for the mouse are:
bind -n MouseDown1Pane select-pane -t=; send-keys -M
bind -n MouseDown1Status select-window -t=
bind -n MouseDrag1Pane copy-mode -M
bind -n MouseDrag1Border resize-pane -M
To get the effect of turning mode-mouse off, do:
unbind -n MouseDrag1Pane
unbind -temacs-copy MouseDrag1Pane
The old mouse options are now gone, set-option -q may be used to
suppress warnings if mixing configuration files.
2015-04-19 21:34:21 +00:00
nicm
ee123c2489
Support setting the default window and pane background colours (window
...
and active pane via window-style and window-active-style options, an
individual pane by a new select-pane -P flag). From J Raynor.
2015-04-19 21:05:27 +00:00
Thomas Adam
370cf75458
Merge branch 'obsd-master'
2015-04-19 14:44:56 +01:00
nicm
02df86079b
Fix some format specifier nits, from Ben Boeckel.
2015-03-31 17:45:10 +00:00
Thomas Adam
833fe5bdee
Merge branch 'obsd-master'
...
Conflicts:
cmd-pipe-pane.c
2015-02-06 19:07:43 +00:00
nicm
8d94bb67ab
Use formats not status_replace for set-titles-string.
2015-02-06 17:17:12 +00:00
nicm
c9642ee213
Remove two unused arguments from status_replace.
2015-02-01 23:43:23 +00:00
Nicholas Marriott
747cab4281
No need for $Id$ now.
2014-11-08 12:27:43 +00:00
Thomas Adam
35ffd093d7
Merge branch 'obsd-master'
...
Conflicts:
Makefile
cmd-link-window.c
cmd-unlink-window.c
2014-10-29 12:51:21 +00:00
nicm
abfb9656ef
Fix some spacing nits.
2014-10-22 23:18:53 +00:00
Thomas Adam
562af864bd
Merge branch 'obsd-master'
...
Conflicts:
Makefile
cmd-list-commands.c
cmd-suspend-client.c
job.c
tmux.h
xmalloc.c
2014-10-21 07:11:44 +01:00
nicm
c011446e78
Update status when pane selected with mouse, from Balazs Kezes.
2014-10-02 09:31:30 +00:00
Nicholas Marriott
b6aef2490f
Ignore ENXIO on Solaris as well, from Peter Schow.
2014-10-02 09:47:00 +01:00
Thomas Adam
2874a431c0
Merge branch 'obsd-master'
2014-09-25 11:29:54 +01:00
nicm
4e956d545a
Various minor style and spacing nits.
2014-09-01 21:50:18 +00:00
Thomas Adam
a131b82e95
Merge branch 'obsd-master'
...
Conflicts:
client.c
2014-08-09 20:31:36 +01:00
nicm
1ac96200a7
Remove support for the continuous reporting "any" mouse mode which never
...
really worked properly and is rarely used.
2014-08-09 07:33:37 +00:00
krw
2b67907176
An EOF is a good reason to close a connection.
...
ok nicm@
2014-07-13 20:51:08 +00:00
nicm
f117c7d94a
If a client is killed while suspended with ^Z so has gone through the
...
MSG_EXITED dance, don't try to resume it since a) it's pointless and b)
the tty structures have been cleaned up and tmux will crash.
2014-07-13 20:23:10 +00:00
Thomas Adam
953c3ef47a
Merge branch 'obsd-master'
...
Conflicts:
Makefile
tmux.1
window.c
2014-04-23 11:26:11 +01:00
nicm
e5d85c6c3c
Because we pass the file descriptor from client to server, tmux can't
...
usefully work if stdin is /dev/tty. Complain about it more clearly.
2014-04-16 08:02:31 +00:00
Thomas Adam
0c99c7dbff
Merge branch 'obsd-master'
...
Conflicts:
Makefile
tty-keys.c
2014-04-05 12:36:14 +01:00
Nicholas Marriott
cbd360b7dd
Spaces to tabs.
2014-03-06 12:46:03 +00:00
Nicholas Marriott
b65c72c45c
Restore SunOS fix, noticed by Greg Onufer.
2014-03-05 23:28:32 +00:00
nicm
f1828921df
Change terminal-overrides to a server option (now that we have them), it
...
doesn't make much sense as a session option.
2014-02-23 00:53:06 +00:00
Thomas Adam
ca1d78f523
Merge branch 'obsd-master'
2014-02-19 15:05:07 +00:00
nicm
69b7c496ac
Be consistent and allow only mouse down and mouse wheel for any pane
...
with mouse-select-pane rather than just in copy mode, reported by Balazs
Kezes.
2014-02-17 22:42:20 +00:00
Thomas Adam
b3de4a3dec
Merge branch 'obsd-master'
...
Conflicts:
tmux.1
tmux.c
2014-02-16 23:02:07 +00:00