Commit Graph

715 Commits

Author SHA1 Message Date
Thomas Adam
5a551ac57f Merge branch 'obsd-master' 2017-04-19 16:01:14 +01:00
nicm
53fde21bb8 Add a suspend helper function, and do not allow detaching or suspending
while already doing so.
2017-04-19 14:00:28 +00:00
Thomas Adam
85af9c9c9d Merge branch 'obsd-master' 2017-04-19 10:01:12 +01:00
nicm
fa6deb5866 When the data we have buffered to write to a terminal grows beyond a
reasonable amount (currently width * height * 8 bytes), discard all
output to the terminal and start trying to redraw periodically
instead. Continue with this until the amount of data we are trying to
write falls to a low level again.

This helps to prevent tmux sitting on a huge buffer of data when there
are processes with fast output running inside tmux but the outside
terminal is slow.

A new client_discarded format holds the amount of data that has been
discarded due to this mechanism.

The three variables (when to start this, when to stop, and how often to
redraw) are basically "works for me" at the moment, this is going in to
see how it goes and if it causes problems for anyone else.
2017-04-19 06:52:27 +00:00
Thomas Adam
a71c262d5f Merge branch 'obsd-master' 2017-04-19 00:01:15 +01:00
nicm
8c8ce08d79 On terminals without DECSLRM, when a pane that is less than the full
with of the terminal scrolls, tmux needs to redraw the entire pane. This
results in a large amount of output data which can cause slow terminals
to struggle, particularly when many lines are scrolled together quickly.

This can be reduced by only redrawing when tmux doesn't hold any
buffered data for the terminal. If a redraw is required and data is
buffered, the redraw is deferred until all that data is consumed (it is
checked after every event loop, a timer is used to ensure this happens
at some point). While a redraw is pending, no additional data will be
written to the terminal.

The redraw still happens, now it is just pushed back if it is possible
it would just add more data on top of a terminal that is already
behind. This both gives the terminal a chance to catch up, and allows
tmux to process more scrolling (that would require additional redraws)
in the meantime.

Helps with a problem reported by Greg Hurrell.
2017-04-18 20:37:49 +00:00
Thomas Adam
28833efb48 Merge branch 'obsd-master' 2017-04-17 10:01:13 +01:00
nicm
7461c165b5 Remove a couple of redraw flags that no longer have any effect. 2017-04-17 06:40:32 +00:00
Thomas Adam
5f662d91db Merge branch 'obsd-master'
Conflicts:
	server-client.c
	tmux.1
2017-04-06 11:10:17 +01:00
nicm
9b28200578 Give each client a name. This defaults to the tty name as before but
falls back to an alternative if the tty name is not available. This is
clearer than overloading the client ttyname member and allows us to
remove the path stored in the tty struct, it should always be the same
as the client.
2017-04-05 10:49:46 +00:00
Thomas Adam
392253f032 Merge branch 'obsd-master' 2017-03-10 00:01:16 +00:00
nicm
55e73e3612 Clear the bracket paste mode when in the command prompt. 2017-03-09 22:00:46 +00:00
Thomas Adam
c5bdae466e Merge branch 'obsd-master' 2017-03-09 18:01:16 +00:00
nicm
bce1dee034 Move the client identify (display-panes) code into server-client.c. 2017-03-09 17:06:35 +00:00
Thomas Adam
ba3c1534e0 Merge branch 'obsd-master' 2017-02-14 20:01:12 +00:00
nicm
e340df2034 Make source-file look for files relative to the client working directory
(like load-buffer and save-buffer), from Chris Pickel. Also break the
where-is-this-file code out into its own function for loadb and saveb.
2017-02-14 18:13:05 +00:00
Thomas Adam
96ad1d7779 Merge branch 'obsd-master' 2017-02-09 14:01:18 +00:00
nicm
b1fa3e25e4 Break the message storage function into its own function, useful for
debugging.
2017-02-09 12:09:33 +00:00
Thomas Adam
130b77edc7 Merge branch 'obsd-master' 2017-02-08 18:01:17 +00:00
nicm
7475165cd8 Some other tidying bits. 2017-02-08 15:49:29 +00:00
Thomas Adam
6c333cc486 Merge branch 'obsd-master' 2017-02-03 14:01:13 +00:00
nicm
7d23d019c0 Add a window or pane id "tag" to each format tree and use it to separate
jobs, this means that if the same job is used for different windows or
panes (for example in pane-border-format), it will be run separately for
each pane.
2017-02-03 11:57:27 +00:00
Thomas Adam
9b1f620aa0 Merge branch 'obsd-master' 2017-02-01 12:01:18 +00:00
nicm
dd0c814779 Implement "all event" (1003) mouse mode but in a way that works. The
main issue is that if we have two panes, A with 1002 and B with 1003, we
need to set 1003 outside tmux in order to get all the mouse events, but
then we need to suppress the ones that pane A doesn't want. This is easy
in SGR mouse mode, because buttons == 3 is only used for movement events
(for other events the trailing m/M marks a release instead), but in
normal mouse mode we can't tell so easily. So for that, look at the
previous event instead - if it is drag+release as well, then the current
event is a movement event.
2017-02-01 09:55:07 +00:00
Thomas Adam
780dd7ac82 Merge branch 'obsd-master' 2017-01-13 14:01:13 +00:00
Thomas Adam
2311bbd28a Merge branch 'obsd-master' 2017-01-13 12:01:12 +00:00
nicm
22a528905d Make options_get_string return const string. 2017-01-13 11:56:43 +00:00
nicm
95950bf668 Add -E to detach-client to exec a command to replace the client instead
of exiting it, useful if tmux wasn't exec'd itself. From Jenna Magius.
2017-01-13 10:12:12 +00:00
Thomas Adam
33ebb9ec39 Merge branch 'obsd-master' 2017-01-12 00:01:13 +00:00
nicm
3bb14001b9 Add some missing special keys to key_string_lookup_key, fix a mouse
check in server_client_handle_key, and tweak a comment.
2017-01-11 22:36:07 +00:00
Thomas Adam
b9fa8f12d7 Merge branch 'obsd-master' 2016-12-07 10:01:12 +00:00
nicm
a8f3ad4487 Make prefix work in all tables (except the prefix table). Users who want
to avoid this can set prefix to "none" and bind send-prefix
themselves. Allows C-b t be bound in the copy mode tables again, pointed
out by millert@.
2016-12-07 09:16:13 +00:00
Thomas Adam
2864a31311 Merge branch 'obsd-master' 2016-11-24 20:01:10 +00:00
nicm
6f8cedb1bc The mouse valid flag needs to be correct before we fire the dragging
callback, so move the callback outside of server_client_check_mouse and
use a new special key code to indicate it.
2016-11-24 18:45:45 +00:00
Thomas Adam
a02d95a313 Merge branch 'obsd-master' 2016-11-24 16:01:11 +00:00
nicm
84319aa8f0 If in the middle of a drag, don't use an invalid key, just use
KEYC_MOUSE as a placeholder. Reported by Artem Fokin.
2016-11-24 14:38:55 +00:00
nicm
0d1be2e328 Fix so that we work out the right pane from mouse events - we were doing
so too early, before the mouse event was necessarily valid, so could end
up using the pane from the previous mouse event, or the active pane.

It is important that we use the right pane now that different panes can
have different key tables (for copy mode).

Fixes problem reported by Greg Hurrell.
2016-11-24 13:46:50 +00:00
Thomas Adam
8a8001350d Merge branch 'obsd-master' 2016-11-23 18:01:19 +00:00
nicm
6de466cf8b For mouse keys, use the mouse pane as the default current pane. 2016-11-23 17:01:24 +00:00
Thomas Adam
06fd3b00ff Merge branch 'obsd-master' 2016-11-16 12:01:11 +00:00
nicm
81f1d625af Do not stop dragging when the wheel is pressed, from Artem Fokin. 2016-11-16 11:37:16 +00:00
Thomas Adam
1afe9e98de Merge branch 'obsd-master' 2016-11-15 16:01:10 +00:00
nicm
c34a79b152 Turn on margins, with a couple of fixes (only limit to the pane for line
feeds, and do not move cursor to end for full width panes).
2016-11-15 15:17:28 +00:00
nicm
0ace779cde Initial attempt to make use of left and right margins if the terminal
supports them (that is, if it advertises itself as a VT420 - probably
just xterm). These are the vertical equivalent of the scroll region and
allow much faster scrolling of panes that do not take up the full width
of the terminal.
2016-11-15 14:02:32 +00:00
Thomas Adam
28a31201d3 Merge branch 'obsd-master' 2016-10-19 12:01:11 +01:00
nicm
899e629bf0 Alerts are too slow, so rather than walking all sessions and windows,
add a link of winlinks to each window and a pointer to the session to
each winlink. Also rewrite the alerts processing to return to the old
behaviour (alert in any window sets the flag on any winlink).
2016-10-19 09:22:07 +00:00
Thomas Adam
d54e990c4f Merge branch 'obsd-master' 2016-10-17 00:01:11 +01:00
nicm
41e633acf5 Use the notify name string instead of going via an enum and change
existing hooks to use notifys instead.
2016-10-16 22:06:40 +00:00
Thomas Adam
1a6e696b08 Merge branch 'obsd-master' 2016-10-16 22:01:14 +01:00
nicm
b342bd0b46 Mass rename struct cmd_q to struct cmdq_item and related. 2016-10-16 19:04:05 +00:00
Thomas Adam
c67b702588 Merge branch 'obsd-master' 2016-10-16 20:01:10 +01:00
nicm
ddc4512d2e Rewrite command queue handling. Each client still has a command queue,
but there is also now a global command queue. Instead of command queues
being dispatched on demand from wherever the command happens to be
added, they are now all dispatched from the top level server
loop. Command queues may now also include callbacks as well as commands,
and items may be inserted after the current command as well as at the end.

This all makes command queues significantly more predictable and easier
to use, and avoids the complex multiple nested command queues used by
source-file, if-shell and friends.

A mass rename of struct cmdq to a better name (cmdq_item probably) is
coming.
2016-10-16 17:55:14 +00:00
Thomas Adam
6551f4bb3b Merge branch 'obsd-master'
Conflicts:
	paste.c
2016-10-13 08:09:47 +01:00
nicm
68bebe1fb7 The repeat prompt in both emacs and vi (and the old one in tmux) doesn't
support line editing and instead executes a command as soon as a
non-number key is pressed. Add a -N flag to command-prompt for the same
in copy mode. Reported by Theo Buehler.
2016-10-12 13:03:27 +00:00
Thomas Adam
b9dc855016 Merge branch 'obsd-master'
Conflicts:
	format.c
	osdep-openbsd.c
2016-10-12 09:45:49 +01:00
nicm
85d7afaefc Support double and triple clicks (they are cumulative, so double is
fired then triple), and use for select-word and select-line in copy
mode. Inspired by a different solution from Omar Sandoval.
2016-10-11 09:30:36 +00:00
nicm
76d6d3641f Fundamental change to how copy mode key bindings work:
The vi-copy and emacs-copy mode key tables are gone, and instead copy
mode commands are bound in one of two normal key tables ("copy-mode" or
"copy-mode-vi"). Keys are bound to "send-keys -X copy-mode-command". So:

    bind -temacs-copy C-Up scroll-up
    bind -temacs-copy -R5 WheelUpPane scroll-up

Becomes:

    bind -Tcopy-mode C-Up send -X scroll-up
    bind -Tcopy-mode WheelUpPane send -N5 -X scroll-up

This allows the full command parser and command set to be used - for
example, we can use the normal command prompt for searching, jumping,
and so on instead of a custom one:

    bind -Tcopy-mode C-r command-prompt -p'search up' "send -X search-backward '%%'"

command-prompt also gets a -1 option to only require on key press, which
is needed for jumping.

The plan is to get rid of mode keys entirely, so more to come eventually.
2016-10-11 07:23:34 +00:00
nicm
c426e485e5 Loads more static, except for cmd-*.c and window-*.c. 2016-10-10 21:29:23 +00:00
Thomas Adam
215d3f8c0d Merge branch 'obsd-master' 2016-10-09 18:01:10 +01:00
nicm
b8f2dd8237 Make the CLIENT_STATUS flag imply that pane status lines are redrawn if
they are enabled and break the actual screen generation code into a
separate function. Fixes problems reported by Romain Francoise.
2016-10-09 16:24:34 +00:00
Thomas Adam
27591570c4 Merge branch 'obsd-master' 2016-09-28 10:01:11 +01:00
nicm
acacb718e5 Rate limit TIOCSWINSZ on a timer to avoid programs getting hammered with
SIGWINCH when the size changes rapidly. To help a problem reported by
Rui Pinheiro.
2016-09-28 08:30:44 +00:00
Thomas Adam
93f42d360b Merge branch 'obsd-master' 2016-06-16 14:01:11 +01:00
nicm
325cbe90d9 Allow a command to be specified to display-panes, similar to
command-prompt, rather than always just selecting the pane.
2016-06-16 10:55:47 +00:00
Thomas Adam
fe4ef307b7 Merge branch 'obsd-master' 2016-05-01 14:01:12 +01:00
nicm
88bd5b15ff tty_client_ready can not be internal to tty.c again. 2016-04-30 18:59:02 +00:00
Thomas Adam
55d472a9fe Merge branch 'obsd-master' 2016-04-29 18:01:09 +01:00
nicm
0509be0740 Add option to include status text in the pane borders. If
pane-border-status is set to "top" or "bottom" (rather than "off"),
every pane has a permanent top or bottom border containing the text from
pane-border-format.

Based on a diff sent long ago by Jonathan Slenders, mostly rewritten and
simplified by me.
2016-04-29 15:00:48 +00:00
Thomas Adam
7a02910feb Merge branch 'obsd-master' 2016-04-28 10:01:10 +01:00
nicm
36976ce5e6 After unlock, Update activity time after recalculate_sizes() so that the
session attached flag is correct.
2016-04-28 06:51:56 +00:00
Thomas Adam
ed598e9fe1 Merge branch 'obsd-master' 2016-03-18 08:01:18 +00:00
nicm
fa97b0a95b Instead of reusing MouseUp at the finish of a drag, add a new key
MouseDragEnd. It can be useful to bind them separately in copy mode.
2016-03-18 07:28:27 +00:00
Thomas Adam
e304673c65 Merge branch 'obsd-master'
Conflicts:
	utf8.c
2016-03-02 18:10:51 +00:00
nicm
54ea8f74ae When a mouse drag is finished, fire a MouseUp key press, instead of
doing the drag end in code. From Stephen Coakley.
2016-03-01 12:04:43 +00:00
Thomas Adam
dc42c35f1f Merge branch 'obsd-master' 2016-01-19 18:01:15 +00:00
nicm
995af0e2b7 I no longer use my SourceForge address so replace it. 2016-01-19 15:59:12 +00:00
Nicholas Marriott
83c96d2685 No need to set cwd on Cygwin now, from Yuya Adachi. 2015-12-20 11:25:13 +00:00
Thomas Adam
e0cae08c04 Merge branch 'obsd-master' 2015-12-17 00:01:08 +00:00
nicm
021c64310d Add infrastructure to work out the best target given a pane or window
alone and use it to add pane_died and pane_exited hooks.
2015-12-16 21:50:37 +00:00
Thomas Adam
e5caf64815 Merge branch 'obsd-master' 2015-12-15 14:01:12 +00:00
nicm
ac9778395f Some hooks API changes to fire a hook while waiting another cmdq and
infrastructure that will be needed soon.
2015-12-15 13:43:07 +00:00
Thomas Adam
845a664bb2 Merge branch 'obsd-master' 2015-12-12 20:01:15 +00:00
nicm
5ed17e84fa Add key-table option to set the default key table for a session, allows
different key bindings for different sessions and a few other things.
2015-12-12 18:32:24 +00:00
nicm
39cf9c9d31 Allow prefix and prefix2 to be set to None to disable (useful if you
would rather bind the prefix in the root table).
2015-12-12 18:19:00 +00:00
Thomas Adam
4909a70174 Merge branch 'obsd-master' 2015-12-11 13:24:45 +00:00
nicm
01831da5f5 Add cmdq as an argument to format_create and add a format for the
command name (will also be used for more later).
2015-12-11 12:27:36 +00:00
Thomas Adam
af8134a6ff Merge branch 'obsd-master' 2015-12-08 10:01:16 +00:00
nicm
e0f26dcda3 Remove format_create_flags and just pass flags to format_create. 2015-12-08 08:34:18 +00:00
Thomas Adam
5862f59ed7 Conflicts:
Makefile
2015-12-08 07:11:09 +00:00
nicm
d2fb0efcd1 Add hooks infrastructure, basic commands (set-hook, show-hooks) and a
couple of not very useful client hooks. This will eventually let
commands be run at various points and on notifications. Joint work with
Thomas Adam.
2015-12-08 01:10:31 +00:00
Thomas Adam
eb5ee80c74 Merge branch 'obsd-master' 2015-12-01 10:01:13 +00:00
nicm
a785a7f700 Do not deref wp if window_get_active_at returns NULL which can happen on
very large terminals, from Michael Graczyk.
2015-12-01 09:41:03 +00:00
Thomas Adam
b642b3c8e3 Merge branch 'obsd-master' 2015-11-23 21:21:12 +00:00
nicm
32e510bd70 Remove support for the UTF-8 mouse extension. This was a briefly used,
poor idea that was fairly quickly replaced by SGR mouse input (which is
now widespread). It is impossible to tell the difference between UTF-8
and non-UTF-8 mouse input; since the mouse-utf8 option was removed tmux
has not handled it correctly in any case; and it is ridiculous to have
three different forms of mouse input.
2015-11-23 20:53:09 +00:00
Thomas Adam
78a00c845c Merge branch 'obsd-master'
Conflicts:
	tmux.h
2015-11-21 14:24:33 +00:00
nicm
374e273df5 Only assume pasting with at least two characters, reduces problems for
people who can type ^B c very fast, or who are using tmux inside
something else that buffers.
2015-11-19 22:46:46 +00:00
Thomas Adam
7fe8edc396 Merge branch 'obsd-master' 2015-11-18 16:01:23 +00:00
nicm
577c0e3e5a Use __unused rather than rolling our own. 2015-11-18 14:27:44 +00:00
Thomas Adam
7b749eff35 Merge branch 'obsd-master'
Conflicts:
	server.c
	tmux.c
2015-11-14 11:38:30 +00:00
nicm
c56b81a2ce Push stdout and stderr to clients more aggressively, and add an event to
continue if the send fails.
2015-11-14 09:41:06 +00:00
Thomas Adam
5f483499f3 Merge branch 'obsd-master' 2015-11-12 12:01:17 +00:00
nicm
69e0b8326a Support UTF-8 key bindings by expanding the key type from int to
uint64_t and converting UTF-8 to Unicode on input and the reverse on
output. (This allows key bindings, there are still omissions - the
largest being that the various prompts do not accept UTF-8.)
2015-11-12 11:05:34 +00:00
Thomas Adam
f2e4aa8d1c Merge branch 'obsd-master' 2015-11-12 00:01:10 +00:00
nicm
00c34df186 Drop mouse-utf8 option and always turn on UTF-8 mouse if the client says
it supports UTF-8.
2015-11-11 23:23:33 +00:00
Thomas Adam
c975de2e07 Merge branch 'obsd-master'
Conflicts:
	server.c
2015-10-31 23:56:35 +00:00
nicm
abb4e9e2fa The output log is only useful once and it means creating a file, so open
it once at startup instead of in every call to tty_open.
2015-10-31 13:12:03 +00:00
Thomas Adam
17f6c3be8e Merge branch 'obsd-master' 2015-10-31 10:01:12 +00:00
nicm
01defc9f49 Because pledge(2) does not allow us to pass directory file descriptors
around, we can't use file descriptors for the working directory because
we will be unable to pass it to a privileged process to tell it where to
read or write files or spawn children. So move tmux back to using
strings for the current working directory. We try to check it exists
with access() when it is set but ultimately fall back to ~ if it fails
at time of use (or / if that fails too).
2015-10-31 08:13:58 +00:00
Thomas Adam
a5e4d3a2d8 Merge branch 'obsd-master' 2015-10-28 12:01:11 +00:00
nicm
bf9c933cae Like options, move the environ struct into environ.c. 2015-10-28 09:51:55 +00:00
Thomas Adam
da1f6fc2c8 Merge branch 'obsd-master'
Conflicts:
	Makefile
	client.c
	server-client.c
	server.c
	tmux.c
	tmux.h
2015-10-27 23:27:26 +00:00
nicm
44657bf932 Move struct options into options.c. 2015-10-27 15:58:42 +00:00
nicm
07b0ea03c3 Break the common process set up, event loop and imsg dispatch code
between server and client out into a separate internal API. This will
make it easier to add another process.
2015-10-27 13:23:24 +00:00
Thomas Adam
9c69a79f9a Merge branch 'obsd-master' 2015-10-27 00:01:09 +00:00
nicm
640c6fdd5f If a mouse event has no key binding, pass it through to the pane it
happened in, not the active pane like normal key presses. Fixes problems
seen by Enrico Ghirardi.
2015-10-26 23:16:18 +00:00
Thomas Adam
54a3ed751e Merge branch 'obsd-master' 2015-10-26 18:01:12 +00:00
nicm
a22fe33aa0 Some extra logging of where keys are actually going. 2015-10-26 17:17:06 +00:00
Thomas Adam
4acc8d0ff5 Merge branch 'obsd-master'
Conflicts:
	cmd-find.c
2015-10-25 09:21:37 +00:00
nicm
2e2b8a95bd Pasting mouse escape sequences is unlikely, so skip them when working
out whether the user is pasting.
2015-10-23 23:46:36 +00:00
Thomas Adam
8c39813665 Merge branch 'obsd-master' 2015-10-22 14:01:12 +01:00
nicm
c2c2d44c72 Log identify messages. 2015-10-22 11:00:51 +00:00
Thomas Adam
1f4a5b5dfe Merge branch 'obsd-master' 2015-10-21 00:01:19 +01:00
nicm
076034345a Use client pointer not file descriptor in logging. 2015-10-20 21:12:08 +00:00
Thomas Adam
af2d48f4d2 Merge branch 'obsd-master' 2015-10-20 16:01:11 +01:00
nicm
8c8cddbe02 The table could change when retrying so don't save it at start of
server_client_handle_key.
2015-10-20 14:19:27 +00:00
Thomas Adam
bbdc08780c Merge branch 'obsd-master' 2015-10-18 22:01:08 +01:00
nicm
174a2ad731 Pass current directory as a string rather than a file descriptor because
pledge doesn't let us pass directory file descriptors.
2015-10-18 20:42:42 +00:00
Thomas Adam
a3bce7a322 Merge branch 'obsd-master' 2015-09-17 00:01:08 +01:00
nicm
a4b4b29987 Rename cmd_q dead flag to a general flags bitmask (will be more flags later). 2015-09-16 22:24:54 +00:00
Thomas Adam
74b958ecbe Merge branch 'obsd-master'
Conflicts:
	Makefile
2015-09-14 12:42:19 +01:00
nicm
16efa84838 Make refresh-client force update of jobs, from Sina Siadat. 2015-09-14 10:25:52 +00:00
Thomas Adam
76688d2040 Merge branch 'obsd-master'
Conflicts:
	cfg.c
	tmux.c
2015-09-06 20:47:50 +01:00
nicm
93b946ee50 Tweak some error messages/comments. 2015-09-01 19:50:09 +00:00
Thomas Adam
cb89f2f2a1 Merge branch 'obsd-master'
Conflicts:
	Makefile
	format.c
2015-08-30 21:44:01 +01:00
nicm
b87dc608d9 Some style nits and dead assignments. 2015-08-30 15:43:40 +00:00
nicm
b9f0571780 We already loop over the windows in server_client_loop, so don't do it
again in server_loop just to check names.
2015-08-29 08:54:41 +00:00
Thomas Adam
486421ceff Merge branch 'obsd-master' 2015-08-28 16:01:09 +01:00
Thomas Adam
84eabb2658 Merge branch 'obsd-master' 2015-08-28 14:01:11 +01:00
nicm
57cc4d45d5 Make session_update_activity more useful and use it in more places. 2015-08-28 13:01:03 +00:00
nicm
75d10058a4 Run status update on a per-client timer at status-interval. 2015-08-28 12:16:28 +00:00
Thomas Adam
73b4d098ce Merge branch 'obsd-master' 2015-07-29 14:01:09 +01:00
nicm
5ec3621101 status_out and associated data structures are no longer used. 2015-07-29 11:56:02 +00:00
Thomas Adam
b886393042 Merge branch 'obsd-master' 2015-07-17 10:01:09 +01:00
nicm
3192178f15 Initialize client fd to -1 as well, from Bobby Powers. 2015-07-17 06:53:47 +00:00
Thomas Adam
07aef38591 Merge branch 'obsd-master' 2015-07-13 18:01:09 +01:00
nicm
e45d624df2 Fix line endings. 2015-07-13 15:51:31 +00:00
nicm
c7374c31c4 Initialize cwd fd to -1 so that we don't close fd 0 if the client is
destroyed before it is changed. Also allow ttyname() to fail. Fixes
problems when running out of file descriptors reported by Bruno Sutic.
2015-07-13 15:49:31 +00:00
Thomas Adam
37005d04a9 Merge branch 'obsd-master' 2015-06-14 12:01:10 +01:00
nicm
29c29e7717 Add a format for client PID (client_pid) and server PID (pid). Diff for
client_pid from Thomas Adam.
2015-06-14 10:07:44 +00:00
Thomas Adam
7acc4addb5 Merge branch 'obsd-master'
Conflicts:
	client.c
	tmux.1
	tmux.c
2015-06-07 23:42:25 +01:00
nicm
10e90ae01f Change deref to the more sensible unref, and add a couple I missed before. 2015-06-05 18:06:30 +00:00
nicm
8c93b768e4 Instead of putting dead clients on a list and checking it every loop,
use event_once to queue a callback to deal with them. Also dead clients
with references would never actually be freed because the wrap-up
functions (the callback for stdin, or status_prompt_clear) would never
be called. So call them in server_client_lost.
2015-06-05 18:01:12 +00:00
nicm
6b2129696f Move the nested check from client to server and compare the client tty
name to all the pane pty names instead of comparing socket paths. This
means that "new -d" will work without unsetting $TMUX.
2015-06-04 23:27:51 +00:00
Thomas Adam
beffdf6575 Merge branch 'obsd-master' 2015-05-27 16:01:22 +01:00
nicm
379400cfa6 Move the jobs output cache into the formats code so that #() work more
generally (for example, again working in set-titles-string).
2015-05-27 13:28:04 +00:00
Thomas Adam
4165ed96f8 Add back __CYGWIN__ block
This went missing during the merge from OpenBSD.
2015-05-09 20:03:24 +01:00
Thomas Adam
504b97b6a4 Merge branch 'obsd-master'
Conflicts:
	tmux.h
2015-05-09 12:52:38 +01:00
nicm
879de25583 Remove some stuff that accidentally ended up here from portable, and
remove a little-used debug function.
2015-05-08 15:56:49 +00:00
Thomas Adam
f10d3675f8 Merge branch 'obsd-master' 2015-05-06 10:03:52 +01:00
nicm
33a585c47f Turn cursor off during redraw, pointed out by George Nachman. 2015-05-06 07:52:06 +00:00
Thomas Adam
72e9ebf2ec Merge branch 'obsd-master' 2015-04-25 20:45:02 +00:00
nicm
07dfdb974d Make message log a TAILQ. 2015-04-25 18:33:59 +00:00
Thomas Adam
56e1132db4 Merge branch 'obsd-master' 2015-04-25 10:02:46 +00:00
nicm
aeedb464a6 Convert clients list into a TAILQ. 2015-04-24 23:17:11 +00:00
nicm
8d66f4fba4 Change the windows array into an RB tree and fix some places where we
were only looking at the first winlink for a window in a session.
2015-04-22 15:30:11 +00:00
Thomas Adam
0a88377086 Merge branch 'obsd-master' 2015-04-22 10:05:54 +01:00
nicm
4cf4302962 Don't eat the mouse event that triggers a drag end because we may want
to pass it on to application inside the pane.
2015-04-21 15:21:41 +00:00
nicm
bded743706 Support for multiple key tables to commands to be bound to sequences of
keys. The default key bindings become the "prefix" table and -n the
"root" table. Keys may be bound in new tables with bind -T and
switch-client -T used to specify the table in which the next key should
be looked up. Based on a diff from Keith Amling.
2015-04-20 15:34:56 +00:00
Thomas Adam
b25dc423b0 Merge branch 'obsd-master' 2015-04-20 15:44:27 +01:00
nicm
bf635e7741 Rewrite of tmux mouse support which was a mess. Instead of having
options for "mouse-this" and "mouse-that", mouse events may be bound as
keys and there is one option "mouse" that turns on mouse support
entirely (set -g mouse on).

See the new MOUSE SUPPORT section of the man page for description of the
key names and new flags (-t= to specify the pane or window under mouse
as a target, and send-keys -M to pass through a mouse event).

The default builtin bindings for the mouse are:

    bind -n   MouseDown1Pane select-pane -t=; send-keys -M
    bind -n MouseDown1Status select-window -t=
    bind -n   MouseDrag1Pane copy-mode -M
    bind -n MouseDrag1Border resize-pane -M

To get the effect of turning mode-mouse off, do:

    unbind -n MouseDrag1Pane
    unbind -temacs-copy MouseDrag1Pane

The old mouse options are now gone, set-option -q may be used to
suppress warnings if mixing configuration files.
2015-04-19 21:34:21 +00:00
nicm
ee123c2489 Support setting the default window and pane background colours (window
and active pane via window-style and window-active-style options, an
individual pane by a new select-pane -P flag). From J Raynor.
2015-04-19 21:05:27 +00:00
Thomas Adam
370cf75458 Merge branch 'obsd-master' 2015-04-19 14:44:56 +01:00
nicm
02df86079b Fix some format specifier nits, from Ben Boeckel. 2015-03-31 17:45:10 +00:00
Thomas Adam
833fe5bdee Merge branch 'obsd-master'
Conflicts:
	cmd-pipe-pane.c
2015-02-06 19:07:43 +00:00
nicm
8d94bb67ab Use formats not status_replace for set-titles-string. 2015-02-06 17:17:12 +00:00
nicm
c9642ee213 Remove two unused arguments from status_replace. 2015-02-01 23:43:23 +00:00
Nicholas Marriott
747cab4281 No need for $Id$ now. 2014-11-08 12:27:43 +00:00
Thomas Adam
35ffd093d7 Merge branch 'obsd-master'
Conflicts:
	Makefile
	cmd-link-window.c
	cmd-unlink-window.c
2014-10-29 12:51:21 +00:00
nicm
abfb9656ef Fix some spacing nits. 2014-10-22 23:18:53 +00:00
Thomas Adam
562af864bd Merge branch 'obsd-master'
Conflicts:
	Makefile
	cmd-list-commands.c
	cmd-suspend-client.c
	job.c
	tmux.h
	xmalloc.c
2014-10-21 07:11:44 +01:00
nicm
c011446e78 Update status when pane selected with mouse, from Balazs Kezes. 2014-10-02 09:31:30 +00:00
Nicholas Marriott
b6aef2490f Ignore ENXIO on Solaris as well, from Peter Schow. 2014-10-02 09:47:00 +01:00
Thomas Adam
2874a431c0 Merge branch 'obsd-master' 2014-09-25 11:29:54 +01:00
nicm
4e956d545a Various minor style and spacing nits. 2014-09-01 21:50:18 +00:00
Thomas Adam
a131b82e95 Merge branch 'obsd-master'
Conflicts:
	client.c
2014-08-09 20:31:36 +01:00
nicm
1ac96200a7 Remove support for the continuous reporting "any" mouse mode which never
really worked properly and is rarely used.
2014-08-09 07:33:37 +00:00
krw
2b67907176 An EOF is a good reason to close a connection.
ok nicm@
2014-07-13 20:51:08 +00:00
nicm
f117c7d94a If a client is killed while suspended with ^Z so has gone through the
MSG_EXITED dance, don't try to resume it since a) it's pointless and b)
the tty structures have been cleaned up and tmux will crash.
2014-07-13 20:23:10 +00:00
Thomas Adam
953c3ef47a Merge branch 'obsd-master'
Conflicts:
	Makefile
	tmux.1
	window.c
2014-04-23 11:26:11 +01:00
nicm
e5d85c6c3c Because we pass the file descriptor from client to server, tmux can't
usefully work if stdin is /dev/tty. Complain about it more clearly.
2014-04-16 08:02:31 +00:00
Thomas Adam
0c99c7dbff Merge branch 'obsd-master'
Conflicts:
	Makefile
	tty-keys.c
2014-04-05 12:36:14 +01:00
Nicholas Marriott
cbd360b7dd Spaces to tabs. 2014-03-06 12:46:03 +00:00
Nicholas Marriott
b65c72c45c Restore SunOS fix, noticed by Greg Onufer. 2014-03-05 23:28:32 +00:00
nicm
f1828921df Change terminal-overrides to a server option (now that we have them), it
doesn't make much sense as a session option.
2014-02-23 00:53:06 +00:00
Thomas Adam
ca1d78f523 Merge branch 'obsd-master' 2014-02-19 15:05:07 +00:00
nicm
69b7c496ac Be consistent and allow only mouse down and mouse wheel for any pane
with mouse-select-pane rather than just in copy mode, reported by Balazs
Kezes.
2014-02-17 22:42:20 +00:00
Thomas Adam
b3de4a3dec Merge branch 'obsd-master'
Conflicts:
	tmux.1
	tmux.c
2014-02-16 23:02:07 +00:00
nicm
e9d32f901a Make status-interval of zero work as indented. 2014-02-14 14:00:18 +00:00
nicm
f835be4bb2 Style nit - no space between function name and bracket. 2014-02-14 13:59:01 +00:00
Thomas Adam
d50e47fc4a Merge branch 'obsd-master'
Conflicts:
	Makefile
	cmd-server-info.c
	cmd-start-server.c
2014-01-31 21:39:56 +00:00
nicm
9f02feb9d0 Break up and simplify screen_redraw_screen. 2014-01-31 14:19:24 +00:00
Thomas Adam
3e498cdb49 Merge branch 'obsd-master' 2013-11-14 07:51:26 +00:00
benno
7624800ddc from nicm: : handle msgbuf_write() returning EAGAIN 2013-11-13 20:43:36 +00:00
nicm
bf35441608 Do not run any command line command from the client which starts the
server until after the configuration file completes. This prevents it
racing against run-shell or if-shell in .tmux.conf that run in the
background.
2013-10-20 17:28:43 +00:00
Thomas
7f479ffdce Merge branch 'obsd-master' into mtemp 2013-10-11 14:33:29 +01:00
nicm
4901d9ddc8 Don't leak file descriptors in the rare MSG_VERSION case. From Chris
Johnsen.
2013-10-11 08:07:12 +00:00
nicm
c1ccefc62d We accidentally haven't been using $TMUX to work out the session for a
while and in fact it is less useful that using the client ttyname. So
don't bother and don't pass it from the client. If we need it in future
it is in c->environ.
2013-10-10 12:29:35 +00:00
nicm
b8b85fbb0c Don't look at string[length - 1] if length == 0. 2013-10-10 12:27:38 +00:00
nicm
282c5f9644 Alter how tmux handles the working directory to internally use file
descriptors rather than strings.

- Each session still has a current working directory.

- New sessions still get their working directory from the client that
  created them or its attached session if any.

- New windows are created by default in the session working directory.

- The -c flag to new, neww, splitw allows the working directory to be
  overridden.

- The -c flag to attach let's the session working directory be changed.

- The default-path option has been removed.

To get the equivalent to default-path '.', do:

        bind c neww -c $PWD

To get the equivalent of default-path '~', do:

        bind c neww -c ~

This also changes the client identify protocol to be a set of messages rather
than one as well as some other changes that should make it easier to make
backwards-compatible protocol changes in future.
2013-10-10 12:26:34 +00:00
nicm
10c38436aa Similarly for MSG_COMMAND - allow full imsg limit not arbitrary 2048. 2013-10-10 12:13:56 +00:00
nicm
47a4a9992c Allow the file descriptor received from the client to be -1. 2013-10-10 11:49:07 +00:00
Nicholas Marriott
e8567098a4 Add support for Cgywin, apparently it is enough just to open the tty again in
the server and fd passing is not necessary. Needs some ifdefs unfortunately but
no way around that and some of them can go next time we're willing to do a
protocol bump. Patch from J Raynor jxraynor at gmail dot com.
2013-07-12 22:21:42 +01:00
Nicholas Marriott
c7a121cfc0 Focus events can cause trouble if left on and they can't be turned off
during idle periods (like the other states are) because we'd miss
events. So add a server option to control them. Defaults to off.
2013-06-28 20:55:16 +01:00
Nicholas Marriott
3977dba761 Focus events can cause trouble if left on and they can't be turned off
during idle periods (like the other states are) because we'd miss
events. So add a server option to control them. Defaults to off.
2013-06-23 13:10:46 +00:00
Thomas Adam
cd60e57b6a Merge branch 'obsd-master'
Sync from OpenBSD.
2013-04-23 08:26:04 +01:00
Nicholas Marriott
5dda1abc32 Don't let server_client_check_focus use a dead bufferevent, from Romain
Francoise.
2013-04-21 21:32:00 +00:00
Thomas Adam
b58bca9a72 Merge branch 'obsd-master'
Conflicts:
	tmux.c
2013-04-13 17:05:49 +01:00
Nicholas Marriott
743bd1275f Need errno.h, reported by Swaroop M S. 2013-04-10 12:52:40 +01:00
Nicholas Marriott
69c86379e3 Remove some code not needed on OpenBSD. 2013-04-10 11:51:16 +00:00
Nicholas Marriott
982354765b Remove tmux's (already minimal) 88 colour support. Such terminals are
few and unnecessary.
2013-03-27 11:17:12 +00:00
Nicholas Marriott
673eb160d4 Sort includes and fix spaces. 2013-03-25 11:53:54 +00:00
Nicholas Marriott
e4c0730bf1 Use single stdout and stderr for control clients. 2013-03-25 11:36:59 +00:00
Nicholas Marriott
62db3c8efe Send DSC 1000p at the beginning of a -CC client's lifetime and ST and
the end, from George Nachman.
2013-03-25 10:03:24 +00:00
Nicholas Marriott
c71844de63 Add resize-pane -Z to temporary zoom the active pane to occupy the full
window or unzoom (restored to the normal layout) if it already zoomed,
bound to C-b z by default. The pane is unzoomed on pretty much any
excuse whatsoever.

We considered making this a new layout but the requirements are quite
different from layouts so decided it is better as a special case. Each
current layout cell is saved, a temporary one-cell layout generated and
all except the active pane set to NULL.

Prompted by suggestions and scripts from several. Thanks to Aaron Jensen
and Thiago Padilha for testing an earlier version.
2013-03-24 09:57:59 +00:00
Nicholas Marriott
20636d956d Add a command queue to standardize and simplify commands that call other
commands and allow a command to block execution of subsequent
commands. This allows run-shell and if-shell to be synchronous which has
been much requested.

Each client has a default command queue and commands are consumed one at
a time from it. A command may suspend execution from the queue by
returning CMD_RETURN_WAIT and then resume it by calling cmd_continue() -
for example run-shell does this from the callback that is fired after
the job is freed.

When the command queue becomes empty, command clients are automatically
exited (unless attaching). A callback is also fired - this is used for
nested commands in, for example, if-shell which can block execution of
the client's cmdq until a new cmdq becomes empty.

Also merge all the old error/info/print functions together and lose the
old curclient/cmdclient distinction - a cmdq is bound to one client (or
none if in the configuration file), this is a command client if
c->session is NULL otherwise an attached client.
2013-03-24 09:54:10 +00:00
Nicholas Marriott
a60687f9ba Handle focus events from the terminal, from Aaron Jensen. 2013-03-24 09:28:59 +00:00
Nicholas Marriott
2243cfbe75 Need to set clients in context before changing their reference count. 2013-03-22 15:54:29 +00:00
Nicholas Marriott
a1722d5c2e Remove unnecessary initializers of cmd_ctx. 2013-03-22 15:50:42 +00:00
Nicholas Marriott
8d59b189cc No more lint means no more ARGSUSED. 2013-03-22 10:31:22 +00:00
Nicholas Marriott
c5504af4a6 Add various checks to turn off bits that can't work in control mode
(such as lock).
2013-03-21 18:47:01 +00:00
Nicholas Marriott
63b4fd5cac Add a format client_prefix which is 1 if prefix key has been
pressed, used for example #{?client_prefix,X,Y}. Also a few extra
server_client_status needed.
2013-03-21 16:14:09 +00:00
Nicholas Marriott
412ac6bc3a Use single stdout and stderr for control clients. 2013-03-11 09:46:18 +00:00
Nicholas Marriott
208881a735 Send DSC 1000p at the beginning of a -CC client's lifetime and ST and the end,
from George Nachman..
2013-03-04 08:52:41 +00:00
Nicholas Marriott
c5239c5984 Add resize-pane -Z to temporary zoom the active pane to occupy the full window
or unzoom (restored to the normal layout) if it already zoomed, bound to C-b z
by default. The pane is unzoomed on pretty much any excuse whatsoever.

We considered making this a new layout but the requirements are quite different
from layouts so decided it is better as a special case. Each current layout
cell is saved, a temporary one-cell layout generated and all except the active
pane set to NULL.

Prompted by suggestions and scripts from several. Thanks to Aaron Jensen and
Thiago Padilha for testing an earlier version.
2013-02-24 00:25:03 +00:00
Nicholas Marriott
3964309c67 Add a command queue to standardize and simplify commands that call other
commands and allow a command to block execution of subsequent commands. This
allows run-shell and if-shell to be synchronous which has been much requested.

Each client has a default command queue and commands are consumed one at a time
from it. A command may suspend execution from the queue by returning
CMD_RETURN_WAIT and then resume it by calling cmd_continue() - for example
run-shell does this from the callback that is fired after the job is freed.

When the command queue becomes empty, command clients are automatically exited
(unless attaching). A callback is also fired - this is used for nested commands
in, for example, if-shell which can block execution of the client's cmdq until
a new cmdq becomes empty.

Also merge all the old error/info/print functions together and lose the old
curclient/cmdclient distinction - a cmdq is bound to one client (or none if in
the configuration file), this is a command client if c->session is NULL
otherwise an attached client.
2013-02-23 22:25:58 +00:00
Nicholas Marriott
ee0f8adfac Handle focus events from the terminal, from Aaron Jensen. 2013-02-23 10:01:34 +00:00
Nicholas Marriott
dbd8e47846 Do pane resize ioctls once at the end of the server loop rather than
immediately.
2013-02-22 21:35:29 +00:00
Nicholas Marriott
4c9f9438ff Add support for focus notifications when tmux pane changes, based on work by
Aaron Jensen.
2013-02-22 07:23:11 +00:00
Nicholas Marriott
afd5e978cf Need to set clients in context before changing their reference count. 2013-02-20 10:25:15 +00:00
Nicholas Marriott
693244795c Remove unnecessary initializers of cmd_ctx. 2013-02-18 23:38:57 +00:00
Nicholas Marriott
293e331d69 Add functions to allocate and free command contexts rather than doing it all on
the stack.
2013-02-18 23:20:21 +00:00
Nicholas Marriott
9d165df18a No more lint means no more ARGSUSED. 2013-02-17 23:15:38 +00:00
Nicholas Marriott
3d9fd1c7f2 Add various checks to turn off bits that can't work in control mode (such as
lock).
2013-02-17 10:12:55 +00:00
Nicholas Marriott
06ac4b628d Add a format client_prefix which is 1 if prefix key has been pressed, used for
example #{?client_prefix,X,Y}. Also a few extra server_client_status needed.
2013-02-10 18:58:05 +00:00
Thomas Adam
64da762c15 Merge branch 'obsd-master' 2013-02-07 12:08:55 +00:00
Nicholas Marriott
85531fd404 Unused variable/type nit from Thomas Adam. 2013-01-30 17:00:17 +00:00
Thomas Adam
a3f4eb7b24 Merge branch 'obsd-master'
Conflicts:
	Makefile
	grid-utf8.c
2013-01-30 15:27:19 +00:00
Nicholas Marriott
c2e2107063 Style nits - return (x) not return x. 2013-01-18 02:10:29 +00:00
Thomas Adam
de194016ec Merge branch 'obsd-master' 2013-01-17 01:38:21 +00:00
Nicholas Marriott
bc2e4a36df If timing between keys is less than (by default) 1 millisecond, assume
the text is being pasted. assume-paste-time option changes the value (0
disables). Based on a diff from Marcin Kulik.
2013-01-15 22:55:29 +00:00
Thomas Adam
47fbf87185 Merge branch 'obsd-master'
Sync from OpenBSD.
2012-10-26 20:28:58 +01:00
Nicholas Marriott
d210d99cce Make mouse event structure clearer by defining events (up, click, drag)
and simplifying how buttons and wheels are represented, from Ailin
Nemui. Should be no functional changes.
2012-10-26 14:35:42 +00:00
Thomas
80b5c0e076 Merge branch 'obsd-master'
Sync from OpenBSD.

* obsd-master:
  Do not leak file descriptor if not a tty, reported by Sebastien Marie.
2012-09-27 11:55:55 +01:00
Nicholas Marriott
7a3ec77dbd Do not leak file descriptor if not a tty, reported by Sebastien Marie. 2012-09-27 10:02:56 +00:00
Nicholas Marriott
41a448193f Send notifications to control clients. Also don't redraw client when
suspended.
2012-09-04 22:36:47 +01:00
Nicholas Marriott
9247c90d69 Send notifications to control clients. Also don't redraw client when
suspended.
2012-09-03 09:32:38 +00:00
Tiago Cunha
1f5e6e35d5 Sync OpenBSD patchset 1151:
Make command exec functions return an enum rather than -1/0/1 values and
add a new value to mean "leave client running but don't attach" to fix
problems with using some commands in a command sequence. Most of the
work by Thomas Adam, problem reported by "jspenguin" on SF bug 3535531.
2012-07-11 19:37:32 +00:00
Tiago Cunha
a432fcd306 Sync OpenBSD patchset 1150:
xfree is not particularly helpful, remove it. From Thomas Adam.
2012-07-11 19:34:16 +00:00
Nicholas Marriott
ede8312d59 Make command exec functions return an enum rather than -1/0/1 values and
add a new value to mean "leave client running but don't attach" to fix
problems with using some commands in a command sequence. Most of the
work by Thomas Adam, problem reported by "jspenguin" on SF bug 3535531.
2012-07-11 07:10:15 +00:00
Nicholas Marriott
df912e3540 xfree is not particularly helpful, remove it. From Thomas Adam. 2012-07-10 11:53:01 +00:00
Tiago Cunha
f4053bc217 Sync OpenBSD patchset 1140:
Remove a couple of unused variables from redbrain at gcc dot gnu dot org.
2012-07-04 10:54:45 +00:00
Nicholas Marriott
a7917430d8 Remove a couple of unused variables from redbrain at gcc dot gnu dot org. 2012-06-20 12:55:55 +00:00
Tiago Cunha
0159c74a32 Sync OpenBSD patchset 1138:
Add a skeleton mode to tmux (called "control mode") that let's tmux
commands be sent and output received on stdout. This can be used to
integrate with other terminal emulators and should allow some other
things to be made simpler later. More to come so doesn't do much yet and
deliberately not documented.
2012-06-18 15:23:01 +00:00
Nicholas Marriott
2942eca895 Add a skeleton mode to tmux (called "control mode") that let's tmux
commands be sent and output received on stdout. This can be used to
integrate with other terminal emulators and should allow some other
things to be made simpler later. More to come so doesn't do much yet and
deliberately not documented.
2012-06-18 13:16:42 +00:00
Tiago Cunha
17da2f7d5f Sync OpenBSD patchset 1121:
Store client in tty struct directly instead of using a callback function
pointer.
2012-05-22 21:05:30 +00:00
Tiago Cunha
ffab6dbc9a Sync OpenBSD patchset 1114:
Instead of passing stdin/stdout/stderr file descriptors over imsg and
handling them in the server, handle them in the client and pass buffers
over imsg. This is much tidier for some upcoming changes and the
performance hit isn't critical.

The tty fd is still passed to the server as before.

This bumps the tmux protocol version so new clients and old servers are
incompatible.
2012-05-22 20:56:35 +00:00
Nicholas Marriott
84c708f355 Store client in tty struct directly instead of using a callback function
pointer.
2012-05-22 14:32:28 +00:00
Nicholas Marriott
7a4679a17f Instead of passing stdin/stdout/stderr file descriptors over imsg and
handling them in the server, handle them in the client and pass buffers
over imsg. This is much tidier for some upcoming changes and the
performance hit isn't critical.

The tty fd is still passed to the server as before.

This bumps the tmux protocol version so new clients and old servers are
incompatible.
2012-05-21 18:27:42 +00:00
Tiago Cunha
1340c012b0 Sync OpenBSD patchset 1111:
Add a helper function to open the terminal for attach-/new-session.
2012-05-12 15:00:19 +00:00
Nicholas Marriott
37f9bb46d8 Add a helper function to open the terminal for attach-/new-session. 2012-05-06 07:38:17 +00:00
Tiago Cunha
bae2701289 Sync OpenBSD patchset 1092:
Stop accepting new clients for 1 second on EMFILE/ENFILE. Based on
ongoing fixes to other daemons by Theo.
2012-04-12 12:43:40 +00:00
Nicholas Marriott
6703ca8d26 Stop accepting new clients for 1 second on EMFILE/ENFILE. Based on
ongoing fixes to other daemons by Theo.
2012-04-11 06:16:14 +00:00
Tiago Cunha
cf8faa3b33 Sync OpenBSD patchset 1064:
Need to call recalculate_sizes() when changing window with the mouse,
from marcel partap.
2012-03-18 02:10:50 +00:00
Tiago Cunha
0987d55231 Sync OpenBSD patchset 1057:
Check event_initialized before event_del if event may not have been set
up; libevent2 complains about this. Reported by Moriyoshi Koizumi.
2012-03-18 01:59:34 +00:00
Tiago Cunha
166681eee9 Sync OpenBSD patchset 1045:
Remove some bits leftover from unused backoff code.
2012-03-18 01:33:56 +00:00
Nicholas Marriott
e87d4b43ab Need to call recalculate_sizes() when changing window with the mouse,
from marcel partap.
2012-03-17 21:34:34 +00:00
Nicholas Marriott
d3c842d367 Check event_initialized before event_del if event may not have been set
up; libevent2 complains about this. Reported by Moriyoshi Koizumi.
2012-03-17 18:24:07 +00:00
Nicholas Marriott
799f437eff Remove some bits leftover from unused backoff code. 2012-03-09 21:42:13 +00:00
Tiago Cunha
509a7e8b73 Sync OpenBSD patchset 1023:
Do not change pane when changing window with mouse on status line,
pointed out by Romain Francoise.
2012-02-02 01:58:47 +00:00
Nicholas Marriott
fdeaa73342 Do not change pane when changing window with mouse on status line,
pointed out by Romain Francoise.
2012-02-02 00:04:54 +00:00
Tiago Cunha
e4a7cefe0c Sync OpenBSD patchset 1015:
Add an option to move the status line to the top of the screen,
requested by many.
2012-01-29 12:57:01 +00:00
Tiago Cunha
e23df3af5a Sync OpenBSD patchset 1014:
Call bufferevent_free before closing file descriptor associated with it
or bugs in $EventMechanism on $OtherOS makes libevent get it's knickers
in a twist. From Dylan Alex Simon.
2012-01-29 12:53:33 +00:00
Nicholas Marriott
230d0fbc9e Add an option to move the status line to the top of the screen,
requested by many.
2012-01-29 09:37:02 +00:00
Nicholas Marriott
9bbc63ed65 Call bufferevent_free before closing file descriptor associated with it
or bugs in $EventMechanism on $OtherOS makes libevent get it's knickers
in a twist. From Dylan Alex Simon.
2012-01-29 02:22:11 +00:00
Tiago Cunha
a34a72d2d9 Sync OpenBSD patchset 1011:
Remove unused backoff code that doesn't do any good.
2012-01-23 12:24:00 +00:00
Nicholas Marriott
678e67437f Remove unused backoff code that doesn't do any good. 2012-01-21 23:51:34 +00:00
Tiago Cunha
a7b0b30bdd Sync OpenBSD patchset 1007:
Drop the ability to have a list of keys in the prefix in favour of two
separate options, prefix and prefix2. This simplifies the code and gets
rid the data options type which was only used for this one option.

Also add a -2 flag to send-prefix to send the secondary prefix key,
fixing a cause of minor irritation.

People who want three prefix keys are out of luck :-).
2012-01-21 19:36:40 +00:00
Nicholas Marriott
535286c05a Drop the ability to have a list of keys in the prefix in favour of two
separate options, prefix and prefix2. This simplifies the code and gets
rid the data options type which was only used for this one option.

Also add a -2 flag to send-prefix to send the secondary prefix key,
fixing a cause of minor irritation.

People who want three prefix keys are out of luck :-).
2012-01-21 08:40:09 +00:00
Tiago Cunha
3a9a24a7c0 Sync OpenBSD patchset 988:
Fix so that when mouse-select-pane and mouse-select-window are both
enabled, clicking on the status line does not change the current
pane. From Romain Francoise.
2011-12-25 23:33:30 +00:00
Nicholas Marriott
d655566ce7 Fix so that when mouse-select-pane and mouse-select-window are both
enabled, clicking on the status line does not change the current
pane. From Romain Francoise.
2011-12-24 08:26:59 +00:00
Tiago Cunha
2651c0d69c Sync OpenBSD patchset 947:
Fix a couple of memory leaks, from marcel partap.
2011-08-21 12:39:34 +00:00
Nicholas Marriott
3657aa675e Fix a couple of memory leaks, from marcel partap. 2011-08-20 20:37:30 +00:00
Tiago Cunha
67e70770c8 Sync OpenBSD patchset 936:
Do not continue to send data to suspended/locked clients or there will
be a huge rush of it after they are resumed/unlocked. The main output
path was fine but status line updates and the terminal state reset code
were missed.
2011-07-08 22:58:30 +00:00
Nicholas Marriott
d5269a2eed Do not continue to send data to suspended/locked clients or there will
be a huge rush of it after they are resumed/unlocked. The main output
path was fine but status line updates and the terminal state reset code
were missed.
2011-07-08 21:51:40 +00:00
Tiago Cunha
719755574d Sync OpenBSD patchset 915:
Support xterm(1) cursor colour change sequences through terminfo(5) Cc
(set) and Cr (reset) extensions. Originally by Sean Estabrooks, tweaked
by me and Ailin Nemui.
2011-05-22 16:25:02 +00:00
Nicholas Marriott
944b5e6fa0 Support xterm(1) cursor colour change sequences through terminfo(5) Cc
(set) and Cr (reset) extensions. Originally by Sean Estabrooks, tweaked
by me and Ailin Nemui.
2011-05-20 19:03:58 +00:00
Tiago Cunha
1e7cea407d Sync OpenBSD patchset 908:
Only select pane on click, not drag. From hsim at gmx.li.
2011-05-18 20:31:32 +00:00
Tiago Cunha
4efd45628d Sync OpenBSD patchset 905:
Add a new option, mouse-resize-pane. When on, panes may be resized by
dragging their borders. From hsim at gmx.li.
2011-05-18 20:30:14 +00:00
Nicholas Marriott
acfabf3a50 Only select pane on click, not drag. From hsim at gmx.li. 2011-05-08 20:45:35 +00:00
Nicholas Marriott
f3741f0653 Add a new option, mouse-resize-pane. When on, panes may be resized by
dragging their borders. From hsim at gmx.li.
2011-05-08 20:34:12 +00:00
Tiago Cunha
268a2efb16 Sync OpenBSD patchset 903:
Change window with mouse wheel over status line if mouse-select-window
is on, from marcel partap.
2011-05-05 10:12:33 +00:00
Tiago Cunha
a734b41fda Sync OpenBSD patchset 900:
Check if mouse-select-pane is ON not off when setting mouse flags,
reported by oga.
2011-05-05 10:03:05 +00:00
Nicholas Marriott
b0a88ebead Change window with mouse wheel over status line if mouse-select-window
is on, from marcel partap.
2011-05-04 18:10:28 +00:00
Nicholas Marriott
7dddf56c08 Check if mouse-select-pane is ON not off when setting mouse flags,
reported by oga.
2011-05-04 17:40:32 +00:00
Tiago Cunha
215ee46106 Sync OpenBSD patchset 896:
When mode-mouse is on (it is off by default), automatically enter copy
mode when the mouse is dragged or the mouse wheel is used. Also exit
copy mode when the mouse wheel is scrolled off the bottom. Discussed
with and written by hsim at gmx dot li.
2011-04-25 20:33:42 +00:00
Nicholas Marriott
8738141913 When mode-mouse is on (it is off by default), automatically enter copy
mode when the mouse is dragged or the mouse wheel is used. Also exit
copy mode when the mouse wheel is scrolled off the bottom. Discussed
with and written by hsim at gmx dot li.
2011-04-19 21:31:33 +00:00
Nicholas Marriott
dc6bd98425 |PatchSet 893
|Date: 2011/04/18 20:49:05
|Author: nicm
|Branch: HEAD
|Tag: (none)
|Log:
|Add an option (mouse-select-window) which allows the mouse to be used by
|clicking on the status line, written by hsim at gmx dot li.
2011-04-18 21:07:58 +00:00
Nicholas Marriott
0bb2119781 Add an option (mouse-select-window) which allows the mouse to be used by
clicking on the status line, written by hsim at gmx dot li.
2011-04-18 19:49:05 +00:00
Nicholas Marriott
ffce6b34b2 |PatchSet 876
|Date: 2011/03/29 20:30:16
|Author: nicm
|Branch: HEAD
|Tag: (none)
|Log:
|Change -t on display-message to be target-pane for the #[A-Z]
|replacements and add -c as target-client.
2011-04-06 22:21:02 +00:00
Nicholas Marriott
d88c20e718 Change -t on display-message to be target-pane for the #[A-Z]
replacements and add -c as target-client.
2011-03-29 19:30:16 +00:00
Tiago Cunha
3d7b8105e1 Sync OpenBSD patchset 855:
Simplify the way jobs work and drop the persist type, so all jobs are
fire-and-forget.

Status jobs now managed with two trees of output (new and old), rather
than storing the output in the jobs themselves. When the status line is
processed any jobs which don't appear in the new tree are started and
the output from the old tree displayed. When a job finishes it updates
the new tree with its output and that is used for any subsequent
redraws. When the status interval expires, the new tree is moved to the
old so that all jobs are run again.

This fixes the "#(echo %H:%M:%S)" problem which would lead to thousands
of identical persistent jobs and high memory use (this can still be
achieved by adding "sleep 30" but that is much less likely to happen by
accident).
2011-02-15 15:20:03 +00:00
Nicholas Marriott
db7a89b1ee Simplify the way jobs work and drop the persist type, so all jobs are
fire-and-forget.

Status jobs now managed with two trees of output (new and old), rather
than storing the output in the jobs themselves. When the status line is
processed any jobs which don't appear in the new tree are started and
the output from the old tree displayed. When a job finishes it updates
the new tree with its output and that is used for any subsequent
redraws. When the status interval expires, the new tree is moved to the
old so that all jobs are run again.

This fixes the "#(echo %H:%M:%S)" problem which would lead to thousands
of identical persistent jobs and high memory use (this can still be
achieved by adding "sleep 30" but that is much less likely to happen by
accident).
2011-01-26 01:54:56 +00:00
Tiago Cunha
1930181b18 Sync OpenBSD patchset 846:
Only set a mouse mode for mouse-select-pane if none already set by the
mode (any will do).
2011-01-21 23:56:53 +00:00
Tiago Cunha
492e3aa437 Sync OpenBSD patchset 834:
Move all calls to fcntl(...O_NONBLOCK) into a function and clear the
flag on the stdio file descriptors before closing them (fixes things
like "tmux ls && cat").
2011-01-21 23:44:13 +00:00
Nicholas Marriott
3de1700f61 Only set a mouse mode for mouse-select-pane if none already set by the
mode (any will do).
2011-01-15 00:46:19 +00:00
Nicholas Marriott
69cb1f830e Move all calls to fcntl(...O_NONBLOCK) into a function and clear the
flag on the stdio file descriptors before closing them (fixes things
like "tmux ls && cat").
2011-01-08 01:52:36 +00:00
Tiago Cunha
219442cff7 Sync OpenBSD patchset 828:
Support for UTF-8 mouse input (\033[1005h). This was added in xterm 262
and supports larger terminals than the older way.

If the new mouse-utf8 option is on, UTF-8 mouse input is enabled for all
UTF-8 terminals. The option defaults to on if LANG etc are set in the
same manner as the utf8 option.

With help and based on code from hsim at gmx.li.
2011-01-07 14:34:45 +00:00
Nicholas Marriott
ac3b78a841 Support for UTF-8 mouse input (\033[1005h). This was added in xterm 262
and supports larger terminals than the older way.

If the new mouse-utf8 option is on, UTF-8 mouse input is enabled for all
UTF-8 terminals. The option defaults to on if LANG etc are set in the
same manner as the utf8 option.

With help and based on code from hsim at gmx.li.
2011-01-03 23:35:21 +00:00
Tiago Cunha
d3c04b74ec Sync OpenBSD patchset 819:
Don't reset the activity timer for unattached sessions every second,
this screws up the choice of most-recently-used. Instead, break the time
update into a little function and do it when the session is attached.

Pointed out by joshe@.
2011-01-03 23:27:54 +00:00
Nicholas Marriott
04b32fa734 Don't reset the activity timer for unattached sessions every second,
this screws up the choice of most-recently-used. Instead, break the time
update into a little function and do it when the session is attached.

Pointed out by joshe@.
2011-01-01 01:12:09 +00:00
Tiago Cunha
095e1b410a Sync OpenBSD patchset 812:
Support all four of the xterm mouse modes. Based on a diff from hsim at
gmx.li.
2010-12-30 22:27:38 +00:00
Nicholas Marriott
f7c42c21ba Support all four of the xterm mouse modes. Based on a diff from hsim at
gmx.li.
2010-12-29 21:49:06 +00:00
Tiago Cunha
bb728b89a7 Sync OpenBSD patchset 802:
Use pointer rather than index for the client's last session.
2010-12-22 15:31:00 +00:00
Nicholas Marriott
9358cfaf4a Use pointer rather than index for the client's last session. 2010-12-20 00:17:22 +00:00
Nicholas Marriott
5fcd6711e4 Track the last session for a client and add a flag to switch-client and
a key binding (L) to move a client back to its last session.
2010-12-11 18:42:20 +00:00
Nicholas Marriott
51487ed22f Track the last session for a client and add a flag to switch-client and
a key binding (L) to move a client back to its last session.
2010-12-11 18:39:25 +00:00
Nicholas Marriott
095ffe9cd1 Make the prompt history global for all clients which is much more useful
than per-client history.
2010-12-11 16:15:02 +00:00
Nicholas Marriott
7ce77ffc9c Make the prompt history global for all clients which is much more useful than per-client history. 2010-12-11 16:05:57 +00:00
Tiago Cunha
1cd9ff4460 Ugh. Don't know how this happened, but make it compile by removing duplicate
code.
2010-10-24 01:51:34 +00:00
Tiago Cunha
1276ea3653 Zap paths.h compat include. 2010-10-24 00:50:11 +00:00
Tiago Cunha
d4b58c71a2 Sync OpenBSD patchset 775:
Trying to set FD_CLOEXEC on every fd is a lost cause, just use
closefrom() before exec.
2010-10-24 00:45:57 +00:00
Nicholas Marriott
f56b4ec2ff Trying to set FD_CLOEXEC on every fd is a lost cause, just use
closefrom() before exec.
2010-10-16 08:31:55 +00:00
Tiago Cunha
b5349ab5d9 Sync OpenBSD patchset 766:
Two new options:

- server option "exit-unattached" makes the server exit when no clients
  are attached, even if sessions are present;

- session option "destroy-unattached" destroys a session once no clients
  are attached to it.

These are useful for preventing tmux remaining in the background where
it is undesirable and when using tmux as a login shell to keep a limit
on new sessions.
2010-10-09 14:29:32 +00:00
Nicholas Marriott
9a7cde0c9b Two new options:
- server option "exit-unattached" makes the server exit when no clients
  are attached, even if sessions are present;

- session option "destroy-unattached" destroys a session once no clients
  are attached to it.

These are useful for preventing tmux remaining in the background where
it is undesirable and when using tmux as a login shell to keep a limit
on new sessions.
2010-09-26 20:43:30 +00:00
Tiago Cunha
510b43569f Sync OpenBSD patchset 755:
Add missing prototype.
2010-09-07 13:19:53 +00:00
Nicholas Marriott
8e8e0f1d53 Add missing prototype. 2010-08-31 22:46:59 +00:00
Tiago Cunha
e6bb3d6942 Sync OpenBSD patchset 750:
Do not need to dup() the tty fd sent from the client because it is
already dup()d again later. Fixes a leak seen by espie@.
2010-08-29 14:39:45 +00:00
Nicholas Marriott
c2822ca119 Do not need to dup() the tty fd sent from the client because it is
already dup()d again later. Fixes a leak seen by espie@.
2010-08-19 17:20:26 +00:00
Tiago Cunha
761bd3c9e3 Sync OpenBSD patchset 745:
Change the way backoff works. Instead of stopping reading from the pty
when the client tty backs up too much, just stop updating the tty and
only update the internal screen. Then when the tty recovers, force a
redraw.

This prevents a dodgy client from causing other clients to go into
backoff while still allowing tmux to be responsive (locally) when seeing
lots of output.
2010-08-11 22:16:04 +00:00
Nicholas Marriott
8363e31953 Change the way backoff works. Instead of stopping reading from the pty
when the client tty backs up too much, just stop updating the tty and
only update the internal screen. Then when the tty recovers, force a
redraw.

This prevents a dodgy client from causing other clients to go into
backoff while still allowing tmux to be responsive (locally) when seeing
lots of output.
2010-08-11 07:34:43 +00:00
Tiago Cunha
4387db506f Sync OpenBSD patchset 742:
dup() the stdin fd so it isn't closed twice (once for stdin, once for tty).
2010-08-09 21:45:37 +00:00
Tiago Cunha
d7bae0edce Sync OpenBSD patchset 741:
When changing so that the client passes its stdout and stderr as well as
stdin up to the server, I forgot one essential point - the tmux server
could now be both the producer and consumer. This happens when tmux is
run inside tmux, as well as when piping tmux commands together.

So, using stdio(3) was a bad idea - if sufficient data was written, this
could block in write(2). When that happened and the server was both
producer and consumer, it deadlocks.

Change to use libevent bufferevents for the client stdin, stdout and
stderr instead. This is trivial enough for output but requires a
callback mechanism to trigger when stdin is finished.

This relies on the underlying polling mechanism for libevent to work
with whatever devices to which the user could redirect stdin, stdout or
stderr, hence the change to use poll(2) over kqueue(2) for tmux.
2010-08-09 21:44:25 +00:00
Nicholas Marriott
77f9c49829 dup() the stdin fd so it isn't closed twice (once for stdin, once for tty). 2010-07-28 22:15:15 +00:00
Nicholas Marriott
c87187f913 When changing so that the client passes its stdout and stderr as well as
stdin up to the server, I forgot one essential point - the tmux server
could now be both the producer and consumer. This happens when tmux is
run inside tmux, as well as when piping tmux commands together.

So, using stdio(3) was a bad idea - if sufficient data was written, this
could block in write(2). When that happened and the server was both
producer and consumer, it deadlocks.

Change to use libevent bufferevents for the client stdin, stdout and
stderr instead. This is trivial enough for output but requires a
callback mechanism to trigger when stdin is finished.

This relies on the underlying polling mechanism for libevent to work
with whatever devices to which the user could redirect stdin, stdout or
stderr, hence the change to use poll(2) over kqueue(2) for tmux.
2010-07-24 20:11:59 +00:00
Tiago Cunha
7ed9b0f8fb Sync OpenBSD patchset 737:
Send the \n to stdout with the message, not stderr... doh.
2010-07-20 17:36:03 +00:00
Nicholas Marriott
2a0f3f0d79 Send the \n to stdout with the message, not stderr... doh. 2010-07-19 18:27:38 +00:00
Tiago Cunha
ad6a528f61 Sync OpenBSD patchset 734:
Return the command client return code with MSG_EXIT now that MSG_ERROR and
MSG_PRINT are unused.

New clients should be compatible with old tmux servers but vice versa may print
an error.
2010-07-17 14:36:41 +00:00
Nicholas Marriott
b9c873cdaa Return the command client return code with MSG_EXIT now that MSG_ERROR and
MSG_PRINT are unused.

New clients should be compatible with old tmux servers but vice versa may print
an error.
2010-07-11 17:06:45 +00:00
Tiago Cunha
e4573de97b Sync OpenBSD patchset 731:
Send all three of stdin, stdout, stderr from the client to the server, so that
commands can directly make use of them. This means that load-buffer and
save-buffer can have "-" as the file to read from stdin or write to stdout.

This is a protocol version bump so the tmux server will need to be restarted
after upgrade (or an older client used).
2010-07-02 02:52:13 +00:00
Nicholas Marriott
76bbdeb586 Send all three of stdin, stdout, stderr from the client to the server, so that
commands can directly make use of them. This means that load-buffer and
save-buffer can have "-" as the file to read from stdin or write to stdout.

This is a protocol version bump so the tmux server will need to be restarted
after upgrade (or an older client used).
2010-06-28 22:10:42 +00:00