automatically zoom the pane when the mode is entered and unzoom when it
exits, assuming the pane is not already zoomed. Add -Z to the default
key bindings.
performance cost with a large history. Instead change back to using a
second grid and copying modified lines over which is much faster (this
doesn't revert to the old code however which didn't support UTF-8
properly). GitHub issue 1249.
colour ("true" or "direct" colour). These consist of new entries (such
as "xterm-direct") which have a different setaf/setab implementation,
colors and pairs set to 0x1000000 and 0x10000, and a new RGB flag.
The setaf/setab definitions seem to be geared towards what ncurses (or
emacs maybe) needs, in that the new versions do only ANSI and RGB
colours (they can't be used for the 256 colour palette); they rely on
the silly ISO colon-separated version of SGR; and they use a weird
multiplication scheme so they still only need one argument. The higher
values of colors and pairs require a recent ncurses to parse.
tmux can use the RGB flag to detect RGB colour support (keeping the old
Tc extension for backwards compatibility for now). However, as we still
want to send 256 colour information unchanged when possible, the new
setaf/setab are awkward. So when RGB is present, reserve setaf/setab
only for ANSI colours and use the escape sequences directly for 256 and
RGB colours. (To my knowledge no recent terminal uses unusual escape
sequences for these in any case.)
background is default (8), introduce an explicit free function and use
it where a free alone is needed. Likewise, use memmove directly rather
than grid_move_lines where it makes sense. Based on a memory leak fix by
Dan Aloni in GitHub issue 1051.
- remove the bell-on-alert option;
- add activity-action and silence-action options with the same possible
values as the existing bell-action;
- add "both" value for the visual-bell, visual-activity and
visual-silence options to trigger both a bell and a message.
This means all three work the same way. Based on changes from Yvain Thonnart.
instead if there is a pipe-pane active, do not exit until all data is
read (including any libevent hasn't seen yet). Fixes problem reported by
Theo Buehler and still seems to solve the original issue.
redraw on SIGWINCH if the size returns to the original size between the
original SIGWINCH and when they get around to calling TIOCGWINSZ. So use
the existing resize timer to introduce a small delay between the two
resizes.
unchanged, because it may have changed and changed back in the time
between us getting the signal and calling ioctl(). Always redraw when we
see SIGWINCH.
until the end of the server loop, tmux may have gone through several
internal resizes in between. This can be a problem if the final size is
the same as the initial size (what the application things it currently
is), because the application may choose not to redraw, assuming the
screen state is unchanged, when in fact tmux has thrown away parts of
the screen, assuming the application will redraw them.
To avoid this, do an extra resize if the new size is the same size as
the initial size. This should force the application to redraw when tmux
needs it to, while retaining the benefits of deferring (so we now resize
at most two times instead of at most one - and only two very rarely).
Fixes a problem with break-pane and zoomed panes reported by Michal
Mazurek.
some modern features.
Now the common code is in mode-tree.c, which provides an API used by the
three modes now separated into window-{buffer,client,tree}.c. Buffer
mode shows buffers, client mode clients and tree mode a tree of
sessions, windows and panes.
Each mode has a common set of key bindings plus a few that are specific
to the mode. Other changes are:
- each mode has a preview pane: for buffers this is the buffer content
(very useful), for others it is a preview of the pane;
- items may be sorted in different ways ('O' key);
- multiple items may be tagged and an operation applied to all of them
(for example, to delete multiple buffers at once);
- in tree mode a command may be run on the selected item (session,
window, pane) or on tagged items (key ':');
- displayed items may be filtered in tree mode by using a format (this
is used to implement find-window) (key 'f');
- the custom format (-F) for the display is no longer available;
- shortcut keys change from 0-9, a-z, A-Z which was always a bit weird
with keys used for other uses to 0-9, M-a to M-z.
Now that the code is simpler, other improvements will come later.
Primary key bindings for each mode are documented under the commands in
the man page (choose-buffer, choose-client, choose-tree).
Parts written by Thomas Adam.
it is present and zero. This is useful for users with terminals or fonts
that do not correctly support UTF-8 line drawing characters. GitHub
issue 927, reported by Hiroaki Yamazoe and Akinori Hattori.
itself hit the "terminal can't keep up" check. To avoid this, record how
much data we send during redraw (we know we will be starting with 0) and
skip the check until it has been flushed. GitHub issue 912.
xterm-keys by default, generates \033[1;3A instead of
\033\033[OA. Unfortunately this confuses vi, which doesn't understand
xterm keys and now sees Escape+Up pressed within escape-time as Escape
followed by A.
The issue doesn't happen in xterm itself because it gets the keys from X
and can distinguish between a genuine M-Up and Escape+Up.
Because xterm can, tmux can too: xterm will give us \033[1;3A (that is,
kUP3) for a real M-Up and \033\033OA for Escape+Up - in fact, we can be
sure any \033 preceding an xterm key is a real Escape key press because
Meta would be part of the xterm key instead of a separate \033.
So change tmux to recognise both sequences as M-Up for its own purposes,
but generate the xterm version of M-Up only if it originally received
the xterm version from the terminal.
This means we will return to sending \033\033OA instead of the xterm key
for terminals that do not support xterm keys themselves, but there is no
practical way around this because they do not allow us to distinguish
between Escape+Up and M-Up. xterm style escape sequences are now the de
facto standard for these keys in any case.
Problem reported by jsing@ and subsequently by Cecile Tonglet in GitHub
issue 907.
and not have to wait for an update when they change pane, we allow
commands to run more than once a second if the expanded form
changes. Unfortunately this can mean them being run far too often
(pretty much continually) when multiple clients exist, because some
formats (including #D) will always differ between clients.
To avoid this, give each client its own tree of jobs which means that
the same command will be different instances for each client - similar
to how we have the tag to separate commands for different panes.
GitHub issue 889; test case reported by Paul Johnson.
CMD_FIND_* flags in the cmd_entry and call it for the command. Commands
with special requirements call it themselves and update the target for
hooks to use.
will suppress root key table bindings. So change to always check the
root table if no binding is found in the current table (whether it be
the prefix table from pressing the prefix or the copy mode table from a
pane).
A root key binding can be blocked by binding the key to a command that
does nothing (like send-keys with no arguments).
Problem reported by Thomas Sattler.
reasonable amount (currently width * height * 8 bytes), discard all
output to the terminal and start trying to redraw periodically
instead. Continue with this until the amount of data we are trying to
write falls to a low level again.
This helps to prevent tmux sitting on a huge buffer of data when there
are processes with fast output running inside tmux but the outside
terminal is slow.
A new client_discarded format holds the amount of data that has been
discarded due to this mechanism.
The three variables (when to start this, when to stop, and how often to
redraw) are basically "works for me" at the moment, this is going in to
see how it goes and if it causes problems for anyone else.
falls back to an alternative if the tty name is not available. This is
clearer than overloading the client ttyname member and allows us to
remove the path stored in the tty struct, it should always be the same
as the client.
together instead of handling them one by one. This is significantly
faster. Sequences are terminated when we reach the end of the line, fill
the internal buffer, or a different character is seen by the input
parser (an escape sequence, or UTF-8).
Rather than writing collected sequences out immediately, hold them until
it is necessary (another screen modification, or we consume all
available data). This means we can discard changes that would have no
effect (for example, lines that would just be scrolled off the screen or
cleared). This reduces the total amount of data we write out to the
terminal - not important for fast terminals, but a big help with slow
(like xterm).
jobs, this means that if the same job is used for different windows or
panes (for example in pane-border-format), it will be run separately for
each pane.
main issue is that if we have two panes, A with 1002 and B with 1003, we
need to set 1003 outside tmux in order to get all the mouse events, but
then we need to suppress the ones that pane A doesn't want. This is easy
in SGR mouse mode, because buttons == 3 is only used for movement events
(for other events the trailing m/M marks a release instead), but in
normal mouse mode we can't tell so easily. So for that, look at the
previous event instead - if it is drag+release as well, then the current
event is a movement event.
commands this pushes more of the code into options.c and ties it more
closely to the options table rather than having an unnecessary
split. Also add support for array options (will be used later). Only
(intentional) user visible change is that show-options output is now
passed through vis(3) with VIS_DQ so quotes are escaped.
are expanded so can compare formats). And expand the condition to
#{?a,b,c} (the "a" part) if it doesn't work as a simple lookup.
Also add FORMAT_NOJOBS flag to disable jobs in a format.
the same as normal searching but updates the cursor position and marked
search terms as you type. C-r and C-s in the prompt repeat the search,
once finished searching (with Enter), N and n work as before.
that it is not affected by scrolling. If MouseDragEnd1Pane is bound to
the new "stop-selection" command:
bind -Tcopy-mode MouseDragEnd1Pane stop-selection
A selection made with the mouse will stay as it is after button 1 is
released. (It also works bound to a key.)
From Artem Fokin.
if the pane is zoomed, so instead add a new function to just check if
the pane is actually on screen (most commands still want to accept panes
invisible by zoom). Also reject panes outside the window for various
special targets. Problem reported by Sean Haugh.
supports them (that is, if it advertises itself as a VT420 - probably
just xterm). These are the vertical equivalent of the scroll region and
allow much faster scrolling of panes that do not take up the full width
of the terminal.
add a link of winlinks to each window and a pointer to the session to
each winlink. Also rewrite the alerts processing to return to the old
behaviour (alert in any window sets the flag on any winlink).
but there is also now a global command queue. Instead of command queues
being dispatched on demand from wherever the command happens to be
added, they are now all dispatched from the top level server
loop. Command queues may now also include callbacks as well as commands,
and items may be inserted after the current command as well as at the end.
This all makes command queues significantly more predictable and easier
to use, and avoids the complex multiple nested command queues used by
source-file, if-shell and friends.
A mass rename of struct cmdq to a better name (cmdq_item probably) is
coming.
confusing, particularly trying to automatically figure out what target
hooks should be using. So simplify it:
- drop before hooks entirely, they don't seem to be very useful;
- commands with special requirements now fire their own after hook (for
example, if they change session or window, or if they have -t and -s
and need to choose which one the hook uses as current target);
- commands with no special requirements can have the CMD_AFTERHOOK flag
added and they will use the -t state.
At the moment new-session, new-window, split-window fire their own hook,
and display-message uses the flag. The remaining commands still need to
be looked at.
sequences (notable EL and ED but also IL, DL, ICH, DCH) create blank
cells using the current background colour rather than the default
colour.
On modern systems BCE doesn't really have many benefits, but most other
terminals now support it, some (lazy) applications rely on it, and it is
not hard to include now that we have pane background colours anyway.
Mostly written by Sean Haugh.
- Prepare the state again before the "after" hooks are run, because the
command may have killed or moved windows.
- Use the hooks list from the newly prepared target, not the old hooks
list (only matters for new-session really).
- Correctly detect an invalid current state and ignore it in
cmd_find_target ("killw; swapw").
- Change neww, new, killp, killw, splitw, swapp, swapw to update the
current state (used if no explicit target is given) to something more
useful after they have finished. For example, neww changes it to the
newly created window.
Hooks are still relatively new and primitive so there are likely to be
more changes to come.
Parts based on bug reports from Uwe Werler and Iblis Lin.
support line editing and instead executes a command as soon as a
non-number key is pressed. Add a -N flag to command-prompt for the same
in copy mode. Reported by Theo Buehler.
The vi-copy and emacs-copy mode key tables are gone, and instead copy
mode commands are bound in one of two normal key tables ("copy-mode" or
"copy-mode-vi"). Keys are bound to "send-keys -X copy-mode-command". So:
bind -temacs-copy C-Up scroll-up
bind -temacs-copy -R5 WheelUpPane scroll-up
Becomes:
bind -Tcopy-mode C-Up send -X scroll-up
bind -Tcopy-mode WheelUpPane send -N5 -X scroll-up
This allows the full command parser and command set to be used - for
example, we can use the normal command prompt for searching, jumping,
and so on instead of a custom one:
bind -Tcopy-mode C-r command-prompt -p'search up' "send -X search-backward '%%'"
command-prompt also gets a -1 option to only require on key press, which
is needed for jumping.
The plan is to get rid of mode keys entirely, so more to come eventually.
into the read callback several times in succession; swap back when we
see empty buffers several times. This hopefully limits how much programs
that print a lot for a long period can monopolize tmux (like large, fast
compiling), without penalizing programs that print a lot briefly (like
most curses applications). Helps a lot for me, the actual numbers may
need tweaking later.
instead track them as change (dirty) and update them once at the end,
saves much time if repeatedly writing the same cell. Also fix comparison
of cells being equal in a few places (memcmp is not enough).
if needed, so it disables reading from the pane. This can be problem
with some programs. So make tmux automatically exit all modes after 180
seconds of inactivity and if there is pending output.
pane-border-status is set to "top" or "bottom" (rather than "off"),
every pane has a permanent top or bottom border containing the text from
pane-border-format.
Based on a diff sent long ago by Jonathan Slenders, mostly rewritten and
simplified by me.
wasting unnecessary space. The 'Tc' flag must be set in the external
TERM entry (using terminal-overrides or a custom terminfo entry), if not
tmux will map to the closest of the 256 or 16 colour palettes.
Mostly from Suraj N Kurapati, based on a diff originally by someone else.
