Commit Graph

220 Commits

Author SHA1 Message Date
nicm
2c0f826c36 Mouse bindings and hooks set up an initial current state when running a
command. This is used for the session, window and pane for all commands
in the command sequence if there is no -t or -s.

However, using it for all commands in the command sequence means that if
the active pane or current session is changed, subsequent commands still
use the previous state. So make commands which explicitly change the
current state (such as neww and selectp) update it themselves for later
commands. Commands which may invalidate the state (like killp) are
already OK because an invalid state will be ignored.

Also fill in the current state for all key bindings rather than just the
mouse, so that any omissions are easier to spot.
2017-04-22 08:56:24 +00:00
nicm
c8ecbf38ab Log error properly when no current state, and some other minor tweaks. 2017-04-21 22:23:24 +00:00
nicm
2ad09ab5af Key needs to be initialized to zero now it has flags in it. 2017-04-21 19:33:07 +00:00
nicm
afa4e3ed9c Add cmd_find_from_winlink_pane and use it in a couple of places, and
make functions that can't fail void.
2017-04-21 17:22:20 +00:00
nicm
92a77e7654 It is annoying that the copy mode key table (or any other key table)
will suppress root key table bindings. So change to always check the
root table if no binding is found in the current table (whether it be
the prefix table from pressing the prefix or the copy mode table from a
pane).

A root key binding can be blocked by binding the key to a command that
does nothing (like send-keys with no arguments).

Problem reported by Thomas Sattler.
2017-04-21 16:04:18 +00:00
nicm
bba588752f Store state shared between multiple commands in the queue in a shared
structure.
2017-04-21 14:01:19 +00:00
nicm
51a0dbb172 Only set up a current target for mouse key bindings. Fixes:
bind q select-pane -U \; resize-pane -Z

(There is still some possible weirdness with the way we do current
targets, it should probably be done in a different way at some point.)
2017-04-20 15:16:20 +00:00
nicm
53fde21bb8 Add a suspend helper function, and do not allow detaching or suspending
while already doing so.
2017-04-19 14:00:28 +00:00
nicm
fa6deb5866 When the data we have buffered to write to a terminal grows beyond a
reasonable amount (currently width * height * 8 bytes), discard all
output to the terminal and start trying to redraw periodically
instead. Continue with this until the amount of data we are trying to
write falls to a low level again.

This helps to prevent tmux sitting on a huge buffer of data when there
are processes with fast output running inside tmux but the outside
terminal is slow.

A new client_discarded format holds the amount of data that has been
discarded due to this mechanism.

The three variables (when to start this, when to stop, and how often to
redraw) are basically "works for me" at the moment, this is going in to
see how it goes and if it causes problems for anyone else.
2017-04-19 06:52:27 +00:00
nicm
8c8ce08d79 On terminals without DECSLRM, when a pane that is less than the full
with of the terminal scrolls, tmux needs to redraw the entire pane. This
results in a large amount of output data which can cause slow terminals
to struggle, particularly when many lines are scrolled together quickly.

This can be reduced by only redrawing when tmux doesn't hold any
buffered data for the terminal. If a redraw is required and data is
buffered, the redraw is deferred until all that data is consumed (it is
checked after every event loop, a timer is used to ensure this happens
at some point). While a redraw is pending, no additional data will be
written to the terminal.

The redraw still happens, now it is just pushed back if it is possible
it would just add more data on top of a terminal that is already
behind. This both gives the terminal a chance to catch up, and allows
tmux to process more scrolling (that would require additional redraws)
in the meantime.

Helps with a problem reported by Greg Hurrell.
2017-04-18 20:37:49 +00:00
nicm
7461c165b5 Remove a couple of redraw flags that no longer have any effect. 2017-04-17 06:40:32 +00:00
nicm
9b28200578 Give each client a name. This defaults to the tty name as before but
falls back to an alternative if the tty name is not available. This is
clearer than overloading the client ttyname member and allows us to
remove the path stored in the tty struct, it should always be the same
as the client.
2017-04-05 10:49:46 +00:00
nicm
55e73e3612 Clear the bracket paste mode when in the command prompt. 2017-03-09 22:00:46 +00:00
nicm
bce1dee034 Move the client identify (display-panes) code into server-client.c. 2017-03-09 17:06:35 +00:00
nicm
e340df2034 Make source-file look for files relative to the client working directory
(like load-buffer and save-buffer), from Chris Pickel. Also break the
where-is-this-file code out into its own function for loadb and saveb.
2017-02-14 18:13:05 +00:00
nicm
b1fa3e25e4 Break the message storage function into its own function, useful for
debugging.
2017-02-09 12:09:33 +00:00
nicm
7475165cd8 Some other tidying bits. 2017-02-08 15:49:29 +00:00
nicm
7d23d019c0 Add a window or pane id "tag" to each format tree and use it to separate
jobs, this means that if the same job is used for different windows or
panes (for example in pane-border-format), it will be run separately for
each pane.
2017-02-03 11:57:27 +00:00
nicm
dd0c814779 Implement "all event" (1003) mouse mode but in a way that works. The
main issue is that if we have two panes, A with 1002 and B with 1003, we
need to set 1003 outside tmux in order to get all the mouse events, but
then we need to suppress the ones that pane A doesn't want. This is easy
in SGR mouse mode, because buttons == 3 is only used for movement events
(for other events the trailing m/M marks a release instead), but in
normal mouse mode we can't tell so easily. So for that, look at the
previous event instead - if it is drag+release as well, then the current
event is a movement event.
2017-02-01 09:55:07 +00:00
nicm
22a528905d Make options_get_string return const string. 2017-01-13 11:56:43 +00:00
nicm
95950bf668 Add -E to detach-client to exec a command to replace the client instead
of exiting it, useful if tmux wasn't exec'd itself. From Jenna Magius.
2017-01-13 10:12:12 +00:00
nicm
3bb14001b9 Add some missing special keys to key_string_lookup_key, fix a mouse
check in server_client_handle_key, and tweak a comment.
2017-01-11 22:36:07 +00:00
nicm
a8f3ad4487 Make prefix work in all tables (except the prefix table). Users who want
to avoid this can set prefix to "none" and bind send-prefix
themselves. Allows C-b t be bound in the copy mode tables again, pointed
out by millert@.
2016-12-07 09:16:13 +00:00
nicm
6f8cedb1bc The mouse valid flag needs to be correct before we fire the dragging
callback, so move the callback outside of server_client_check_mouse and
use a new special key code to indicate it.
2016-11-24 18:45:45 +00:00
nicm
84319aa8f0 If in the middle of a drag, don't use an invalid key, just use
KEYC_MOUSE as a placeholder. Reported by Artem Fokin.
2016-11-24 14:38:55 +00:00
nicm
0d1be2e328 Fix so that we work out the right pane from mouse events - we were doing
so too early, before the mouse event was necessarily valid, so could end
up using the pane from the previous mouse event, or the active pane.

It is important that we use the right pane now that different panes can
have different key tables (for copy mode).

Fixes problem reported by Greg Hurrell.
2016-11-24 13:46:50 +00:00
nicm
6de466cf8b For mouse keys, use the mouse pane as the default current pane. 2016-11-23 17:01:24 +00:00
nicm
81f1d625af Do not stop dragging when the wheel is pressed, from Artem Fokin. 2016-11-16 11:37:16 +00:00
nicm
c34a79b152 Turn on margins, with a couple of fixes (only limit to the pane for line
feeds, and do not move cursor to end for full width panes).
2016-11-15 15:17:28 +00:00
nicm
0ace779cde Initial attempt to make use of left and right margins if the terminal
supports them (that is, if it advertises itself as a VT420 - probably
just xterm). These are the vertical equivalent of the scroll region and
allow much faster scrolling of panes that do not take up the full width
of the terminal.
2016-11-15 14:02:32 +00:00
nicm
899e629bf0 Alerts are too slow, so rather than walking all sessions and windows,
add a link of winlinks to each window and a pointer to the session to
each winlink. Also rewrite the alerts processing to return to the old
behaviour (alert in any window sets the flag on any winlink).
2016-10-19 09:22:07 +00:00
nicm
41e633acf5 Use the notify name string instead of going via an enum and change
existing hooks to use notifys instead.
2016-10-16 22:06:40 +00:00
nicm
b342bd0b46 Mass rename struct cmd_q to struct cmdq_item and related. 2016-10-16 19:04:05 +00:00
nicm
ddc4512d2e Rewrite command queue handling. Each client still has a command queue,
but there is also now a global command queue. Instead of command queues
being dispatched on demand from wherever the command happens to be
added, they are now all dispatched from the top level server
loop. Command queues may now also include callbacks as well as commands,
and items may be inserted after the current command as well as at the end.

This all makes command queues significantly more predictable and easier
to use, and avoids the complex multiple nested command queues used by
source-file, if-shell and friends.

A mass rename of struct cmdq to a better name (cmdq_item probably) is
coming.
2016-10-16 17:55:14 +00:00
nicm
68bebe1fb7 The repeat prompt in both emacs and vi (and the old one in tmux) doesn't
support line editing and instead executes a command as soon as a
non-number key is pressed. Add a -N flag to command-prompt for the same
in copy mode. Reported by Theo Buehler.
2016-10-12 13:03:27 +00:00
nicm
85d7afaefc Support double and triple clicks (they are cumulative, so double is
fired then triple), and use for select-word and select-line in copy
mode. Inspired by a different solution from Omar Sandoval.
2016-10-11 09:30:36 +00:00
nicm
76d6d3641f Fundamental change to how copy mode key bindings work:
The vi-copy and emacs-copy mode key tables are gone, and instead copy
mode commands are bound in one of two normal key tables ("copy-mode" or
"copy-mode-vi"). Keys are bound to "send-keys -X copy-mode-command". So:

    bind -temacs-copy C-Up scroll-up
    bind -temacs-copy -R5 WheelUpPane scroll-up

Becomes:

    bind -Tcopy-mode C-Up send -X scroll-up
    bind -Tcopy-mode WheelUpPane send -N5 -X scroll-up

This allows the full command parser and command set to be used - for
example, we can use the normal command prompt for searching, jumping,
and so on instead of a custom one:

    bind -Tcopy-mode C-r command-prompt -p'search up' "send -X search-backward '%%'"

command-prompt also gets a -1 option to only require on key press, which
is needed for jumping.

The plan is to get rid of mode keys entirely, so more to come eventually.
2016-10-11 07:23:34 +00:00
nicm
c426e485e5 Loads more static, except for cmd-*.c and window-*.c. 2016-10-10 21:29:23 +00:00
nicm
b8f2dd8237 Make the CLIENT_STATUS flag imply that pane status lines are redrawn if
they are enabled and break the actual screen generation code into a
separate function. Fixes problems reported by Romain Francoise.
2016-10-09 16:24:34 +00:00
nicm
acacb718e5 Rate limit TIOCSWINSZ on a timer to avoid programs getting hammered with
SIGWINCH when the size changes rapidly. To help a problem reported by
Rui Pinheiro.
2016-09-28 08:30:44 +00:00
nicm
325cbe90d9 Allow a command to be specified to display-panes, similar to
command-prompt, rather than always just selecting the pane.
2016-06-16 10:55:47 +00:00
nicm
88bd5b15ff tty_client_ready can not be internal to tty.c again. 2016-04-30 18:59:02 +00:00
nicm
0509be0740 Add option to include status text in the pane borders. If
pane-border-status is set to "top" or "bottom" (rather than "off"),
every pane has a permanent top or bottom border containing the text from
pane-border-format.

Based on a diff sent long ago by Jonathan Slenders, mostly rewritten and
simplified by me.
2016-04-29 15:00:48 +00:00
nicm
36976ce5e6 After unlock, Update activity time after recalculate_sizes() so that the
session attached flag is correct.
2016-04-28 06:51:56 +00:00
nicm
fa97b0a95b Instead of reusing MouseUp at the finish of a drag, add a new key
MouseDragEnd. It can be useful to bind them separately in copy mode.
2016-03-18 07:28:27 +00:00
nicm
54ea8f74ae When a mouse drag is finished, fire a MouseUp key press, instead of
doing the drag end in code. From Stephen Coakley.
2016-03-01 12:04:43 +00:00
nicm
995af0e2b7 I no longer use my SourceForge address so replace it. 2016-01-19 15:59:12 +00:00
nicm
021c64310d Add infrastructure to work out the best target given a pane or window
alone and use it to add pane_died and pane_exited hooks.
2015-12-16 21:50:37 +00:00
nicm
ac9778395f Some hooks API changes to fire a hook while waiting another cmdq and
infrastructure that will be needed soon.
2015-12-15 13:43:07 +00:00
nicm
5ed17e84fa Add key-table option to set the default key table for a session, allows
different key bindings for different sessions and a few other things.
2015-12-12 18:32:24 +00:00