circlecloud/tmux
1
0
Fork 0
mirror of https://github.com/tmux/tmux.git synced 2024-12-15 03:28:47 +00:00
Code Issues Projects Releases Wiki Activity
8,305 Commits 3 Branches 37 Tags 35 MiB
f986539e3c
Commit Graph

2081 Commits

Author SHA1 Message Date
nicm
13a0b6bb3f Collect sequences of printable ASCII characters and process them 
together instead of handling them one by one. This is significantly
faster. Sequences are terminated when we reach the end of the line, fill
the internal buffer, or a different character is seen by the input
parser (an escape sequence, or UTF-8).

Rather than writing collected sequences out immediately, hold them until
it is necessary (another screen modification, or we consume all
available data). This means we can discard changes that would have no
effect (for example, lines that would just be scrolled off the screen or
cleared). This reduces the total amount of data we write out to the
terminal - not important for fast terminals, but a big help with slow
(like xterm).
 2017-02-08 16:45:18 +00:00
Thomas Adam
a9a0039be4 Merge branch 'obsd-master' 2017-02-08 10:01:22 +00:00
nicm
9cc02d1498 Trying to avoid the occasional newline by saving the last cell on screen 
is not actually helping us much and just adds complexity, so don't
bother.
 2017-02-08 08:50:10 +00:00
nicm
35a0606de1 Remove event watermarks, don't work well enough to be worth it. 2017-02-08 08:25:12 +00:00
Thomas Adam
9f66fb4fd7 Merge branch 'obsd-master' 2017-02-07 00:01:13 +00:00
nicm
d60e585d9e Use DECFRA on VT420 compatible terminals (so, xterm) and ED on all 
others for clearing panes.
 2017-02-06 22:05:11 +00:00
Thomas Adam
dfdc23d86c Merge branch 'obsd-master' 2017-02-06 22:01:16 +00:00
Thomas Adam
7417e391d5 Merge branch 'obsd-master' 2017-02-06 20:01:15 +00:00
nicm
68e04907de Do not go through the whole attributes setting process if the new cell 
is the same as the previous one.
 2017-02-06 19:45:23 +00:00
nicm
10e14ae504 Add BCE for clear to start of screen, which was somehow missed. 2017-02-06 19:26:49 +00:00
Thomas Adam
1199f8fc59 Merge branch 'obsd-master' 2017-02-06 16:01:20 +00:00
nicm
e67548dc36 Cancel key table when switching session, unless the key is going to 
repeat. Reported by Amos Bird.
 2017-02-06 15:00:41 +00:00
Thomas Adam
446177a832 Merge branch 'obsd-master' 2017-02-06 14:01:16 +00:00
nicm
3fd34e70e5 Only redraw the modified character when adding combining characters, not 
the whole line.
 2017-02-06 13:23:00 +00:00
Thomas Adam
e1c283325e Merge branch 'obsd-master' 2017-02-03 22:01:18 +00:00
nicm
5e6a8177e5 Cache status line position to reduce option lookups during output. 2017-02-03 21:01:02 +00:00
Thomas Adam
6c333cc486 Merge branch 'obsd-master' 2017-02-03 14:01:13 +00:00
nicm
7d23d019c0 Add a window or pane id "tag" to each format tree and use it to separate 
jobs, this means that if the same job is used for different windows or
panes (for example in pane-border-format), it will be run separately for
each pane.
 2017-02-03 11:57:27 +00:00
Thomas Adam
9b1f620aa0 Merge branch 'obsd-master' 2017-02-01 12:01:18 +00:00
nicm
dd0c814779 Implement "all event" (1003) mouse mode but in a way that works. The 
main issue is that if we have two panes, A with 1002 and B with 1003, we
need to set 1003 outside tmux in order to get all the mouse events, but
then we need to suppress the ones that pane A doesn't want. This is easy
in SGR mouse mode, because buttons == 3 is only used for movement events
(for other events the trailing m/M marks a release instead), but in
normal mouse mode we can't tell so easily. So for that, look at the
previous event instead - if it is drag+release as well, then the current
event is a movement event.
 2017-02-01 09:55:07 +00:00
Thomas Adam
d8da761d54 Merge branch 'obsd-master' 2017-01-31 00:01:12 +00:00
nicm
3408595f77 When a flag option is used in a format, it should use the number form 
not string.
 2017-01-30 21:41:17 +00:00
Thomas Adam
21d8f77a0d Merge branch 'obsd-master' 2017-01-25 16:01:13 +00:00
nicm
163732e89f Revert previous for now, it will break TERM=screen. 2017-01-25 14:36:08 +00:00
nicm
0a63ab4f0f If xterm-keys is on, use xterm(1) style keys for Home and End as well as 
modified keys.
 2017-01-25 14:24:54 +00:00
Thomas Adam
418ab1a553 Merge branch 'obsd-master' 2017-01-24 22:01:13 +00:00
nicm
4b2821ff98 Make update-environment an array as well. 2017-01-24 20:15:32 +00:00
Thomas Adam
f38a6bbd81 Merge branch 'obsd-master' 2017-01-24 20:01:12 +00:00
nicm
85338bb75f Add support for custom command aliases, this is an array option which 
contains items of the form "alias=command". This is consulted when an
unknown command is parsed.
 2017-01-24 19:53:37 +00:00
nicm
61fce272ea If given an array option without an index either show or set all items, 
and support -a for array options. Allow the separator for set to be
specified in the options table (will be used for backwards compatibility
later).
 2017-01-24 19:11:46 +00:00
Thomas Adam
b3a724f30c Merge branch 'obsd-master' 
Conflicts:
	Makefile
	tmux.c
 2017-01-23 12:20:43 +00:00
nicm
98e7fbb2ac Open /dev/ptm before pledge() and save it to be used for PTMGET later 
(this means inlining forkpty()).

ok deraadt
 2017-01-23 10:09:43 +00:00
Thomas Adam
044999ce6d Merge branch 'obsd-master' 2017-01-18 12:01:11 +00:00
nicm
faa0570309 Plain stravis() because it will mangle UTF-8 characters, so add 
utf8_stravis() which calls our existing utf8_strvis() and use it instead
 2017-01-18 10:08:05 +00:00
Thomas Adam
7e110b9d99 Merge branch 'obsd-master' 2017-01-16 15:36:02 +00:00
nicm
ef15b4195f Revert WIP parts of previous I didn't mean to commit yet. 2017-01-16 14:52:25 +00:00
nicm
68db958477 getopt() has a struct option so just return to using options_entry. 2017-01-16 14:49:14 +00:00
Thomas Adam
7b60645732 Merge branch 'obsd-master' 2017-01-16 00:01:10 +00:00
Thomas Adam
c9fcb76651 Merge branch 'obsd-master' 2017-01-15 22:01:11 +00:00
nicm
52847a9518 It is silly for cmd_list_parse to return an integer error when it could 
just return NULL.
 2017-01-15 22:00:56 +00:00
nicm
2b0bc9f1c5 Major tidy up and rework of options tree and set-option/show-options 
commands this pushes more of the code into options.c and ties it more
closely to the options table rather than having an unnecessary
split. Also add support for array options (will be used later). Only
(intentional) user visible change is that show-options output is now
passed through vis(3) with VIS_DQ so quotes are escaped.
 2017-01-15 20:48:41 +00:00
Thomas Adam
780dd7ac82 Merge branch 'obsd-master' 2017-01-13 14:01:13 +00:00
Thomas Adam
2311bbd28a Merge branch 'obsd-master' 2017-01-13 12:01:12 +00:00
nicm
08d21936e4 options_get_style return const too. 2017-01-13 11:58:49 +00:00
nicm
95950bf668 Add -E to detach-client to exec a command to replace the client instead 
of exiting it, useful if tmux wasn't exec'd itself. From Jenna Magius.
 2017-01-13 10:12:12 +00:00
Thomas Adam
d4cb178249 Merge branch 'obsd-master' 2017-01-12 16:01:13 +00:00
nicm
24cba5907b Simplify appending to string options. 2017-01-12 15:36:35 +00:00
Thomas Adam
1eb9500644 Merge branch 'obsd-master' 2017-01-12 12:01:10 +00:00
nicm
dad3090d32 Put all palette functions together in the file. 2017-01-12 10:15:55 +00:00
Thomas Adam
4a76861925 Merge branch 'obsd-master' 2017-01-12 02:01:11 +00:00
nicm
9e786030df Fix setting the palette of aixterm colours (90-97). 2017-01-12 00:19:32 +00:00
Thomas Adam
d87ab0cadf Merge branch 'obsd-master' 2017-01-11 18:01:13 +00:00
nicm
bf6a5c056d Add a format for terminal type. 2017-01-11 16:09:57 +00:00
nicm
7497ecd979 Use a macro for looking up tty types. 2017-01-11 16:05:46 +00:00
Thomas Adam
0d19d78fff Merge branch 'obsd-master' 2017-01-11 16:01:16 +00:00
nicm
458b6eb600 Some tidying and tweaks to options code. 2017-01-11 14:56:44 +00:00
Thomas Adam
2c862b04af Merge branch 'obsd-master' 2017-01-09 22:01:12 +00:00
nicm
844f2eacf4 Add simple comparisons in formats: #{==:a,b} and #{!=:a,b} ("a" and "b" 
are expanded so can compare formats). And expand the condition to
#{?a,b,c} (the "a" part) if it doesn't work as a simple lookup.

Also add FORMAT_NOJOBS flag to disable jobs in a format.
 2017-01-09 21:03:25 +00:00
Thomas Adam
95f5d406e5 Merge branch 'obsd-master' 2017-01-09 20:01:12 +00:00
nicm
5330a2a85d Run the source-file pattern through glob(3). 2017-01-09 19:27:00 +00:00
Thomas Adam
29e64a8c64 Merge branch 'obsd-master' 2017-01-07 16:01:17 +00:00
nicm
314e933914 Add support for the OSC 4 and OSC 104 palette setting escape sequences, 
from S Gilles.
 2017-01-07 15:28:13 +00:00
Thomas Adam
a3428487a7 Merge branch 'obsd-master' 2017-01-06 14:01:15 +00:00
nicm
461217d0f0 Incremental search in copy mode (on for emacs keys by default) - much 
the same as normal searching but updates the cursor position and marked
search terms as you type. C-r and C-s in the prompt repeat the search,
once finished searching (with Enter), N and n work as before.
 2017-01-06 11:57:03 +00:00
Thomas Adam
58642011df Merge branch 'obsd-master' 2017-01-05 10:01:11 +00:00
nicm
9a56671a75 Highlight all occurrences of search string after searching in copy mode. 2017-01-05 09:07:15 +00:00
Thomas Adam
d3328a3b1e Merge branch 'obsd-master' 2016-12-28 12:01:14 +00:00
nicm
70ba3c147f Fix the prefer unattached session behaviour of 
attach-session/switch-client, reported by Thomas Sattle.
 2016-12-28 10:34:34 +00:00
Thomas Adam
2864a31311 Merge branch 'obsd-master' 2016-11-24 20:01:10 +00:00
nicm
6f8cedb1bc The mouse valid flag needs to be correct before we fire the dragging 
callback, so move the callback outside of server_client_check_mouse and
use a new special key code to indicate it.
 2016-11-24 18:45:45 +00:00
Thomas Adam
a02d95a313 Merge branch 'obsd-master' 2016-11-24 16:01:11 +00:00
nicm
7e6c2cb238 Make the selection able to exist independent of the cursor position, so 
that it is not affected by scrolling. If MouseDragEnd1Pane is bound to
the new "stop-selection" command:

    bind -Tcopy-mode MouseDragEnd1Pane stop-selection

A selection made with the mouse will stay as it is after button 1 is
released. (It also works bound to a key.)

From Artem Fokin.
 2016-11-24 13:38:44 +00:00
Thomas Adam
8a8001350d Merge branch 'obsd-master' 2016-11-23 18:01:19 +00:00
nicm
6de466cf8b For mouse keys, use the mouse pane as the default current pane. 2016-11-23 17:01:24 +00:00
Thomas Adam
12c49fa3bd Merge branch 'obsd-master' 2016-11-16 02:01:11 +00:00
nicm
e88b74350f The target validity check used window_pane_visible but that may be false 
if the pane is zoomed, so instead add a new function to just check if
the pane is actually on screen (most commands still want to accept panes
invisible by zoom). Also reject panes outside the window for various
special targets. Problem reported by Sean Haugh.
 2016-11-16 00:24:03 +00:00
Thomas Adam
1afe9e98de Merge branch 'obsd-master' 2016-11-15 16:01:10 +00:00
nicm
c34a79b152 Turn on margins, with a couple of fixes (only limit to the pane for line 
feeds, and do not move cursor to end for full width panes).
 2016-11-15 15:17:28 +00:00
nicm
0ace779cde Initial attempt to make use of left and right margins if the terminal 
supports them (that is, if it advertises itself as a VT420 - probably
just xterm). These are the vertical equivalent of the scroll region and
allow much faster scrolling of panes that do not take up the full width
of the terminal.
 2016-11-15 14:02:32 +00:00
Thomas Adam
1de107c405 Merge branch 'obsd-master' 2016-11-04 16:01:11 +00:00
nicm
353439acee enum values need to fit in 32 bits; we only use enum for numbering and 
Unicode characters fit in 24 bits, so we can leave key_code as 64 bits
and change KEYC_BASE down to 0x10000000.
 2016-11-04 14:47:38 +00:00
Thomas Adam
28a31201d3 Merge branch 'obsd-master' 2016-10-19 12:01:11 +01:00
nicm
899e629bf0 Alerts are too slow, so rather than walking all sessions and windows, 
add a link of winlinks to each window and a pointer to the session to
each winlink. Also rewrite the alerts processing to return to the old
behaviour (alert in any window sets the flag on any winlink).
 2016-10-19 09:22:07 +00:00
Thomas Adam
8576ecaf32 Merge branch 'obsd-master' 2016-10-18 12:01:10 +01:00
nicm
2e5c49a1fd Give each item on queue a name for better logging. 2016-10-18 08:46:43 +00:00
Thomas Adam
d54e990c4f Merge branch 'obsd-master' 2016-10-17 00:01:11 +01:00
nicm
fe106842c8 Use notifys for alerts too. 2016-10-16 22:18:04 +00:00
nicm
41e633acf5 Use the notify name string instead of going via an enum and change 
existing hooks to use notifys instead.
 2016-10-16 22:06:40 +00:00
Thomas Adam
1a6e696b08 Merge branch 'obsd-master' 2016-10-16 22:01:14 +01:00
nicm
3f35b5299f Provide a way for hooks to tag formats onto the commands they fire so 
that the user can get at additional information - now used for the
"hook" format, more to come.
 2016-10-16 19:36:37 +00:00
nicm
026ad08b56 Notifys can go via the command queue instead of using their own queue. 2016-10-16 19:15:02 +00:00
nicm
b342bd0b46 Mass rename struct cmd_q to struct cmdq_item and related. 2016-10-16 19:04:05 +00:00
Thomas Adam
c67b702588 Merge branch 'obsd-master' 2016-10-16 20:01:10 +01:00
nicm
ddc4512d2e Rewrite command queue handling. Each client still has a command queue, 
but there is also now a global command queue. Instead of command queues
being dispatched on demand from wherever the command happens to be
added, they are now all dispatched from the top level server
loop. Command queues may now also include callbacks as well as commands,
and items may be inserted after the current command as well as at the end.

This all makes command queues significantly more predictable and easier
to use, and avoids the complex multiple nested command queues used by
source-file, if-shell and friends.

A mass rename of struct cmdq to a better name (cmdq_item probably) is
coming.
 2016-10-16 17:55:14 +00:00
Thomas Adam
59d1147469 Merge branch 'obsd-master' 2016-10-15 12:01:14 +01:00
nicm
e7990375cb Give window_create and window_create1 better names. 2016-10-15 09:27:52 +00:00
Thomas Adam
623e54788e Merge branch 'obsd-master' 2016-10-15 02:01:12 +01:00
nicm
3f138dc40c Rename a function for consistency and some spacing nits. 2016-10-15 00:12:58 +00:00
nicm
63b2547a02 Fire hooks on the simple notifys (window-renamed and session-renamed), 
the complicated ones get no hooks for now (more to come).
 2016-10-15 00:09:30 +00:00
nicm
9b3ae84993 Drain notifys once at the end of the server loop instead of doing it 
from the end of every command queue (which could be nested).
 2016-10-15 00:01:01 +00:00
Thomas Adam
117737c6ca Merge branch 'obsd-master' 2016-10-14 02:01:14 +01:00
nicm
4289a1ebfa Trying to do hooks generically is way too complicated and unreliable and 
confusing, particularly trying to automatically figure out what target
hooks should be using. So simplify it:

- drop before hooks entirely, they don't seem to be very useful;

- commands with special requirements now fire their own after hook (for
  example, if they change session or window, or if they have -t and -s
  and need to choose which one the hook uses as current target);

- commands with no special requirements can have the CMD_AFTERHOOK flag
  added and they will use the -t state.

At the moment new-session, new-window, split-window fire their own hook,
and display-message uses the flag. The remaining commands still need to
be looked at.
 2016-10-13 22:48:51 +00:00
Thomas Adam
ad5a561adb Merge branch 'obsd-master' 2016-10-13 22:01:12 +01:00
nicm
4179b42424 Add support for BCE (background colour erase). This makes various escape 
sequences (notable EL and ED but also IL, DL, ICH, DCH) create blank
cells using the current background colour rather than the default
colour.

On modern systems BCE doesn't really have many benefits, but most other
terminals now support it, some (lazy) applications rely on it, and it is
not hard to include now that we have pane background colours anyway.

Mostly written by Sean Haugh.
 2016-10-13 20:27:27 +00:00
Thomas Adam
6270392d04 Merge branch 'obsd-master' 2016-10-13 12:01:11 +01:00
nicm
4d9e6ea310 Some improvements and bug fixes for hooks: 
- Prepare the state again before the "after" hooks are run, because the
  command may have killed or moved windows.

- Use the hooks list from the newly prepared target, not the old hooks
  list (only matters for new-session really).

- Correctly detect an invalid current state and ignore it in
  cmd_find_target ("killw; swapw").

- Change neww, new, killp, killw, splitw, swapp, swapw to update the
  current state (used if no explicit target is given) to something more
  useful after they have finished. For example, neww changes it to the
  newly created window.

Hooks are still relatively new and primitive so there are likely to be
more changes to come.

Parts based on bug reports from Uwe Werler and Iblis Lin.
 2016-10-13 10:01:49 +00:00
Thomas Adam
6551f4bb3b Merge branch 'obsd-master' 
Conflicts:
	paste.c
 2016-10-13 08:09:47 +01:00
nicm
40253048ca bind-key -c has gone, remove from man page, and unused table declarations. 2016-10-12 15:26:37 +00:00
nicm
c484c5a2a1 Drop the edit mode key tables and just use fixed key bindings for the 
command prompt.
 2016-10-12 14:50:14 +00:00
nicm
4160df4ca4 Redraw selection in tty_draw_line, so it appears when redrawing whole 
pane. Reported by Theo Buehler.
 2016-10-12 13:24:07 +00:00
nicm
68bebe1fb7 The repeat prompt in both emacs and vi (and the old one in tmux) doesn't 
support line editing and instead executes a command as soon as a
non-number key is pressed. Add a -N flag to command-prompt for the same
in copy mode. Reported by Theo Buehler.
 2016-10-12 13:03:27 +00:00
Thomas Adam
b9dc855016 Merge branch 'obsd-master' 
Conflicts:
	format.c
	osdep-openbsd.c
 2016-10-12 09:45:49 +01:00
nicm
5c49e1d0c1 Some other stuff that can be local to one file. 2016-10-11 13:45:47 +00:00
nicm
e45401846f Add static in window-*.c and move some internal functions out of tmux.h. 2016-10-11 13:21:59 +00:00
nicm
85d7afaefc Support double and triple clicks (they are cumulative, so double is 
fired then triple), and use for select-word and select-line in copy
mode. Inspired by a different solution from Omar Sandoval.
 2016-10-11 09:30:36 +00:00
nicm
76d6d3641f Fundamental change to how copy mode key bindings work: 
The vi-copy and emacs-copy mode key tables are gone, and instead copy
mode commands are bound in one of two normal key tables ("copy-mode" or
"copy-mode-vi"). Keys are bound to "send-keys -X copy-mode-command". So:

    bind -temacs-copy C-Up scroll-up
    bind -temacs-copy -R5 WheelUpPane scroll-up

Becomes:

    bind -Tcopy-mode C-Up send -X scroll-up
    bind -Tcopy-mode WheelUpPane send -N5 -X scroll-up

This allows the full command parser and command set to be used - for
example, we can use the normal command prompt for searching, jumping,
and so on instead of a custom one:

    bind -Tcopy-mode C-r command-prompt -p'search up' "send -X search-backward '%%'"

command-prompt also gets a -1 option to only require on key press, which
is needed for jumping.

The plan is to get rid of mode keys entirely, so more to come eventually.
 2016-10-11 07:23:34 +00:00
nicm
8b804fb589 Support UTF-8 entry into the command prompt. 2016-10-11 07:11:40 +00:00
Thomas Adam
27126f8797 Merge branch 'obsd-master' 2016-10-10 20:01:11 +01:00
nicm
66b5477cc1 Do not allow the opposite pane to resize when dragging with the mouse 
because it is not possible to keep the mouse on the border when the
minimum size is reached.
 2016-10-10 17:28:30 +00:00
Thomas Adam
226b6a2192 Merge branch 'obsd-master' 2016-10-10 16:01:12 +01:00
nicm
7d4b416fe6 Some more static. 2016-10-10 13:54:47 +00:00
Thomas Adam
215d3f8c0d Merge branch 'obsd-master' 2016-10-09 18:01:10 +01:00
nicm
b8f2dd8237 Make the CLIENT_STATUS flag imply that pane status lines are redrawn if 
they are enabled and break the actual screen generation code into a
separate function. Fixes problems reported by Romain Francoise.
 2016-10-09 16:24:34 +00:00
Thomas Adam
5b8f033e06 Merge branch 'obsd-master' 2016-10-05 14:01:10 +01:00
nicm
4117a7ed19 Keep buffer creation time and add accessors for it and the order number. 2016-10-05 12:34:05 +00:00
Thomas Adam
27591570c4 Merge branch 'obsd-master' 2016-09-28 10:01:11 +01:00
nicm
acacb718e5 Rate limit TIOCSWINSZ on a timer to avoid programs getting hammered with 
SIGWINCH when the size changes rapidly. To help a problem reported by
Rui Pinheiro.
 2016-09-28 08:30:44 +00:00
Thomas Adam
895f1d93d5 Merge branch 'obsd-master' 2016-09-16 16:01:16 +01:00
nicm
eb50e7a2c8 Swap watermarks from high (4096) to low (128) when we get full buffers 
into the read callback several times in succession; swap back when we
see empty buffers several times. This hopefully limits how much programs
that print a lot for a long period can monopolize tmux (like large, fast
compiling), without penalizing programs that print a lot briefly (like
most curses applications). Helps a lot for me, the actual numbers may
need tweaking later.
 2016-09-16 13:43:41 +00:00
Thomas Adam
a5b29a1250 Merge branch 'obsd-master' 2016-09-12 18:01:12 +01:00
nicm
2e5584c2b4 Allow repeat count to be specified in mode key tables with bind-key -R, 
and set the default repeat count to 5 for WheelUp and WheelDown in
copy-mode.
 2016-09-12 15:40:58 +00:00
Thomas Adam
f68a908c8a Merge branch 'obsd-master' 2016-09-04 20:01:16 +01:00
nicm
fed1e384ad Add support for performing a full width split (with splitw -f), rather 
than splitting the current cell. From Stephen Kent.
 2016-09-04 17:37:06 +00:00
Thomas Adam
999c1c771b Merge branch 'obsd-master' 2016-09-03 00:01:14 +01:00
nicm
2627ab322e Remember the number of lines scrolled into the history (versus cleared 
into the history) and when resizing only use scrolled lines and not
cleared lines (which are probably not intended to reappear). From
Chaoren Lin.
 2016-09-02 20:57:20 +00:00
Thomas Adam
baf1550227 Merge branch 'obsd-master' 2016-08-03 12:01:11 +01:00
nicm
f8cc48a43f Fix minimum size when pane status line is enabled, reported by Y Petremann. 2016-08-03 09:07:02 +00:00
Thomas Adam
a24260bb23 Merge branch 'obsd-master' 2016-07-15 12:01:10 +01:00
nicm
9436a31603 Tweak output of environment logging. 2016-07-15 09:52:34 +00:00
nicm
1718420c48 Log environment to new panes. 2016-07-15 09:28:32 +00:00
Thomas Adam
d4eeeb5498 Merge branch 'obsd-master' 2016-07-15 04:01:12 +01:00
nicm
0f73af876f Don't update cells in each block of data read from a pane immediately, 
instead track them as change (dirty) and update them once at the end,
saves much time if repeatedly writing the same cell. Also fix comparison
of cells being equal in a few places (memcmp is not enough).
 2016-07-15 00:49:08 +00:00
Thomas Adam
93f42d360b Merge branch 'obsd-master' 2016-06-16 14:01:11 +01:00
nicm
325cbe90d9 Allow a command to be specified to display-panes, similar to 
command-prompt, rather than always just selecting the pane.
 2016-06-16 10:55:47 +00:00
Thomas Adam
5c12230a08 Merge branch 'obsd-master' 2016-06-15 12:01:11 +01:00
nicm
bee3e3e28d Copy mode needs to keep the original grid intact so it can copy from it 
if needed, so it disables reading from the pane. This can be problem
with some programs. So make tmux automatically exit all modes after 180
seconds of inactivity and if there is pending output.
 2016-06-15 09:13:46 +00:00
Thomas Adam
cc096ae929 Merge branch 'obsd-master' 2016-06-06 10:01:11 +01:00
nicm
aba4438013 Cache selected state so that cells going from selected to unselected are not 
skipped, reported by Omar Sandoval.
 2016-06-06 07:28:52 +00:00
nicm
00cf5fbde6 Insert new panes after the pane being split in the list rather than 
always after the active pane. This is more sensible when doing it with
commands rather than keys.
 2016-06-06 07:24:31 +00:00
Thomas Adam
c7a0f56c71 Merge branch 'obsd-master' 2016-05-30 12:01:13 +01:00
nicm
1921fac814 Cache the window styles and do not look up the window-style options 
unless they have changed.
 2016-05-30 09:50:20 +00:00
Thomas Adam
a2e0db67cc Merge branch 'obsd-master' 2016-05-27 20:01:11 +01:00
nicm
fcb00a4161 Use getprogname() instead of __progname to make portability easier. 2016-05-27 17:05:42 +00:00
Thomas Adam
6cb74f4b7d Merge branch 'obsd-master' 2016-05-12 18:01:10 +01:00
tim
fdd368a294 - Rework load_cfg() error handling a little. 
- Add -q to source-file to suppress errors about nonexistent files.

Input and OK nicm@
 2016-05-12 16:05:33 +00:00
Thomas Adam
96538b489b Merge branch 'obsd-master' 2016-05-01 16:01:11 +01:00
nicm
4a6eca5bd7 Use the same code for half page scrolling as full, from Michal Mazurek. 2016-05-01 13:39:05 +00:00
Thomas Adam
fe4ef307b7 Merge branch 'obsd-master' 2016-05-01 14:01:12 +01:00
nicm
88bd5b15ff tty_client_ready can not be internal to tty.c again. 2016-04-30 18:59:02 +00:00
Thomas Adam
55d472a9fe Merge branch 'obsd-master' 2016-04-29 18:01:09 +01:00
Thomas Adam
ba9f32b464 Merge branch 'obsd-master' 2016-04-29 16:01:12 +01:00
nicm
0509be0740 Add option to include status text in the pane borders. If 
pane-border-status is set to "top" or "bottom" (rather than "off"),
every pane has a permanent top or bottom border containing the text from
pane-border-format.

Based on a diff sent long ago by Jonathan Slenders, mostly rewritten and
simplified by me.
 2016-04-29 15:00:48 +00:00
nicm
c5443da2d3 The backoff timer is causing no end of trouble with disconnected clients 
stopping data in attached ones. So get rid of it and see how we get on
with just a high watermark on each pane.
 2016-04-29 13:36:10 +00:00
nicm
5f2bfd9807 Make the grid_cell passed into screen_write_* const. 2016-04-29 13:21:33 +00:00
Thomas Adam
55fdaab365 Merge branch 'obsd-master' 2016-04-27 12:01:10 +01:00
nicm
1cedf78284 Add next/previous paragraph, from J Raynor. 2016-04-27 09:39:09 +00:00
Thomas Adam
ed598e9fe1 Merge branch 'obsd-master' 2016-03-18 08:01:18 +00:00
nicm
fa97b0a95b Instead of reusing MouseUp at the finish of a drag, add a new key 
MouseDragEnd. It can be useful to bind them separately in copy mode.
 2016-03-18 07:28:27 +00:00
Thomas Adam
e304673c65 Merge branch 'obsd-master' 
Conflicts:
	utf8.c
 2016-03-02 18:10:51 +00:00
nicm
b8a102d26f Handle wcwidth() and mbtowc() failures in better style and drop 
characters where we can't find the width (wcwidth() fails) on input, the
same as we drop invalid UTF-8. Suggested by schwarze@.
 2016-03-02 15:36:02 +00:00
nicm
26945d7956 Use system wcwidth() instead of carrying around UTF-8 width tables. 2016-03-01 12:02:08 +00:00
Thomas Adam
5fce21728e Merge branch 'obsd-master' 2016-01-31 12:01:09 +00:00
nicm
fa64b89ad7 Whoops, need this for the previous reverse trim commit too. 2016-01-31 09:57:41 +00:00
Thomas Adam
8cf1504ba6 Merge branch 'obsd-master' 2016-01-29 12:01:16 +00:00
nicm
427b820426 Support for RGB colour, using the extended cell mechanism to avoid 
wasting unnecessary space. The 'Tc' flag must be set in the external
TERM entry (using terminal-overrides or a custom terminfo entry), if not
tmux will map to the closest of the 256 or 16 colour palettes.

Mostly from Suraj N Kurapati, based on a diff originally by someone else.
 2016-01-29 11:13:56 +00:00
Thomas Adam
dc42c35f1f Merge branch 'obsd-master' 2016-01-19 18:01:15 +00:00
nicm
b5b5221c13 Split out getting the current state from the target search so it can be 
replaced if we already know the current.
 2016-01-19 16:01:30 +00:00
nicm
995af0e2b7 I no longer use my SourceForge address so replace it. 2016-01-19 15:59:12 +00:00
Thomas Adam
5d21faa99c Merge branch 'obsd-master' 2016-01-16 02:01:10 +00:00
nicm
c9815307eb Add hooks for alerts (bell, silence, activity), from Thomas Adam. 2016-01-16 00:36:53 +00:00
Thomas Adam
506adf3764 Merge branch 'obsd-master' 2016-01-15 12:01:11 +00:00
nicm
68d797587e A couple of missing printflike attributes, from Andrey Starodubtsev. 2016-01-15 11:31:47 +00:00
Thomas Adam
e0cae08c04 Merge branch 'obsd-master' 2015-12-17 00:01:08 +00:00
nicm
99e9a4c786 send-keys -R should reset the input parser to ground state (so it can be 
used to escape from, for example, printf '\033]2;').
 2015-12-16 22:05:35 +00:00
Thomas Adam
e5caf64815 Merge branch 'obsd-master' 2015-12-15 14:01:12 +00:00
nicm
ac9778395f Some hooks API changes to fire a hook while waiting another cmdq and 
infrastructure that will be needed soon.
 2015-12-15 13:43:07 +00:00
Thomas Adam
1a33ea9671 Merge branch 'obsd-master' 2015-12-15 02:01:14 +00:00
Thomas Adam
6ab17e3e15 Merge branch 'obsd-master' 2015-12-15 00:01:08 +00:00
nicm
12da13c9d1 Make the marked pane a cmd_find_state. 2015-12-15 00:00:01 +00:00
nicm
d5999f8b5c Use cmd_find_clear_state instead of an extra function doing the same. 2015-12-14 23:30:58 +00:00
Thomas Adam
bc6137f9e4 Merge branch 'obsd-master' 2015-12-14 01:30:15 +00:00
nicm
a3129fd4e8 Instead of combined flags for -c, -s, -t, split into different sets 
using an enum and simplify the parsing code.
 2015-12-14 00:31:54 +00:00
Thomas Adam
5caec3020d Merge branch 'obsd-master' 2015-12-13 23:46:58 +00:00
nicm
ecfeee2e82 Use member names in cmd_entry definitions so I stop getting confused 
about the order.
 2015-12-13 21:53:57 +00:00
Thomas Adam
00da99f2c4 Merge branch 'obsd-master' 2015-12-13 20:01:09 +00:00
nicm
72948d9f1d -c needs to be able for fail for display-message. 2015-12-13 18:31:47 +00:00
Thomas Adam
d37a580085 Merge branch 'obsd-master' 2015-12-13 18:01:11 +00:00
nicm
9f5aca62a9 Use struct cmd_find_state directly and remove cmd_state_flag, also 
change so that winlink is set even if an index is too.
 2015-12-13 17:55:14 +00:00
nicm
9b7697db62 Change cmd_find_target to use a state struct from the caller. 2015-12-13 16:44:35 +00:00
Thomas Adam
ae5ddfdc1a Merge branch 'obsd-master' 2015-12-13 16:01:13 +00:00
nicm
ff599f4004 Remove the cmd_find_{session,window,pane,index} functions (which are 
just wrappers around cmd_find_target) and just use cmd_find_target
directly.
 2015-12-13 15:32:12 +00:00
nicm
4a4daf1303 Instead of every command resolving the target (-t or -s) itself, prepare 
the state (client, session, winlink, pane) for it it before entering the
command. Each command provides some flags that tell the prepare step
what it is expecting.

This is a requirement for having hooks on commands (for example, if you
hook "select-window -t1:2", the hook command should to operate on window
1:2 not whatever it thinks is the current window), and should allow some
other target improvements.

The old cmd_find_* functions remain for the moment but that layer will
be dropped later.

Joint work with Thomas Adam.
 2015-12-13 14:32:38 +00:00
Thomas Adam
845a664bb2 Merge branch 'obsd-master' 2015-12-12 20:01:15 +00:00
nicm
5ed17e84fa Add key-table option to set the default key table for a session, allows 
different key bindings for different sessions and a few other things.
 2015-12-12 18:32:24 +00:00
nicm
39cf9c9d31 Allow prefix and prefix2 to be set to None to disable (useful if you 
would rather bind the prefix in the root table).
 2015-12-12 18:19:00 +00:00
Thomas Adam
2a6b215328 Merge branch 'obsd-master' 2015-12-11 18:01:11 +00:00
nicm
88bc8f3528 Style nits and line wrapping of function declarations. 2015-12-11 16:37:21 +00:00
Thomas Adam
2a3456cd3b Merge branch 'obsd-master' 2015-12-11 16:01:16 +00:00
nicm
bd5918760e We cannot do hooks_find and then hooks_remove because it might have come 
from the parent (global) tree, instead make it remove by name like options.

While here, also tidy up a few bits of options and hooks handling (use
RB_FOREACH_SAFE, and a helper function for the free).
 2015-12-11 15:46:57 +00:00
Thomas Adam
4909a70174 Merge branch 'obsd-master' 2015-12-11 13:24:45 +00:00
nicm
01831da5f5 Add cmdq as an argument to format_create and add a format for the 
command name (will also be used for more later).
 2015-12-11 12:27:36 +00:00
Thomas Adam
af8134a6ff Merge branch 'obsd-master' 2015-12-08 10:01:16 +00:00
nicm
e0f26dcda3 Remove format_create_flags and just pass flags to format_create. 2015-12-08 08:34:18 +00:00
nicm
8f671d3eef Spacing nits. 2015-12-08 08:14:04 +00:00
Thomas Adam
5862f59ed7 Conflicts: 
Makefile
 2015-12-08 07:11:09 +00:00
nicm
d2fb0efcd1 Add hooks infrastructure, basic commands (set-hook, show-hooks) and a 
couple of not very useful client hooks. This will eventually let
commands be run at various points and on notifications. Joint work with
Thomas Adam.
 2015-12-08 01:10:31 +00:00
Thomas Adam
bac8c72381 Merge branch 'obsd-master' 2015-12-07 10:01:09 +00:00
nicm
b9563340b7 Fix bell indicators across detach, reported by Torbjorn Lonnemark, diff 
from Thomas Adam.
 2015-12-07 09:47:41 +00:00
Thomas Adam
9fe8b28746 Merge branch 'obsd-master' 2015-11-27 15:41:28 +00:00
nicm
6a2ca34216 Do not set a limit on the length of commands when printing them. 2015-11-27 15:06:43 +00:00
Thomas Adam
890d8da2e3 Merge branch 'obsd-master' 
Conflicts:
	log.c
	proc.c
	tmux.c
 2015-11-25 16:37:30 +00:00
nicm
62d3af17f9 Make environ_set va_args and use it to tidy up some calls. Also add a 
missing word in manpage (from jmc).
 2015-11-24 23:46:15 +00:00
nicm
3ff46b2e43 Shell command from -c doesn't have to be global, pass it as an argument. 2015-11-24 23:22:51 +00:00
nicm
c913fb99b6 Tidy the code that works out the socket path, and just use the full path 
in the global socket_path rather than copying it.
 2015-11-24 22:27:22 +00:00
nicm
1e2df2d464 Remove the -I part of show-messages which isn't really that useful; the 
server start time can now be accessed with a new start_time format (use:
tmux display -p '#{t:start_time}')
 2015-11-24 21:52:06 +00:00
nicm
9cccb8c115 Make the log stuff a bit tidier with some helper functions. 2015-11-24 21:19:46 +00:00
Thomas Adam
534f9e3ab1 Merge branch 'obsd-master' 2015-11-24 10:01:13 +00:00
nicm
b32ce34cf2 Don't allow options in table without scope set. 2015-11-24 09:34:55 +00:00
Thomas Adam
3f47ff6ecd Merge branch 'obsd-master' 2015-11-24 00:01:16 +00:00
nicm
2adf3f42ee Partly revert previous, it is harmless to keep support for UTF-8 mouse 
mode inside tmux, just no longer support it for tmux itself.
 2015-11-23 23:47:57 +00:00
Thomas Adam
b642b3c8e3 Merge branch 'obsd-master' 2015-11-23 21:21:12 +00:00
nicm
32e510bd70 Remove support for the UTF-8 mouse extension. This was a briefly used, 
poor idea that was fairly quickly replaced by SGR mouse input (which is
now widespread). It is impossible to tell the difference between UTF-8
and non-UTF-8 mouse input; since the mouse-utf8 option was removed tmux
has not handled it correctly in any case; and it is ridiculous to have
three different forms of mouse input.
 2015-11-23 20:53:09 +00:00
Thomas Adam
78a00c845c Merge branch 'obsd-master' 
Conflicts:
	tmux.h
 2015-11-21 14:24:33 +00:00
nicm
fce56c56ef Instead of separate tables for different types of options, give each 
option a scope type (server, session, window) in one table.
 2015-11-20 12:01:19 +00:00
nicm
374e273df5 Only assume pasting with at least two characters, reduces problems for 
people who can type ^B c very fast, or who are using tmux inside
something else that buffers.
 2015-11-19 22:46:46 +00:00
Thomas Adam
7fe8edc396 Merge branch 'obsd-master' 2015-11-18 16:01:23 +00:00
nicm
577c0e3e5a Use __unused rather than rolling our own. 2015-11-18 14:27:44 +00:00
Thomas Adam
8fa822b521 Merge branch 'obsd-master' 2015-11-18 14:01:12 +00:00
nicm
64571368dc Sync the entire xmalloc.[ch] with the other users, but with the addition 
of xrealloc, xvasprintf, xvsnprintf.
 2015-11-18 13:06:54 +00:00
Thomas Adam
1686a15fb6 Merge branch 'obsd-master' 2015-11-16 00:01:10 +00:00
nicm
661d0dfac9 Make key_code unsigned long long not uint64_t which is more portable for 
printf formats, and move UTF8_SIZE define down to near the rest of the
UTF-8 bits.
 2015-11-15 22:50:38 +00:00
Thomas Adam
f12d7f0d4b Merge branch 'obsd-master' 2015-11-14 12:01:09 +00:00
nicm
205d15e82d All these return values from utf8_* are confusing, use an enum. 2015-11-14 11:45:43 +00:00
Thomas Adam
7b4b78b419 Merge branch 'obsd-master' 2015-11-14 11:38:52 +00:00
Thomas Adam
7b749eff35 Merge branch 'obsd-master' 
Conflicts:
	server.c
	tmux.c
 2015-11-14 11:38:30 +00:00
nicm
64333e3ef8 Be more strict about invalid UTF-8. 2015-11-14 10:56:31 +00:00
nicm
c56b81a2ce Push stdout and stderr to clients more aggressively, and add an event to 
continue if the send fails.
 2015-11-14 09:41:06 +00:00
Thomas Adam
3df4959f51 Merge branch 'obsd-master' 
Conflicts:
	Makefile
 2015-11-13 10:42:45 +00:00
nicm
c5689a5a40 Long overdue change to the way we store cells in the grid: now, instead 
of storing a full grid_cell with UTF-8 data and everything, store a new
type grid_cell_entry. This can either be the cell itself (for ASCII
cells), or an offset into an extended array (per line) for UTF-8
data.

This avoid a large (8 byte) overhead on non-UTF-8 cells (by far the
majority for most users) without the complexity of the shadow array we
had before. Grid memory without any UTF-8 is about half.

The disadvantage that cells can no longer be modified in place and need
to be copied out of the grid and back but it turned out to be lot less
complicated than I expected.
 2015-11-13 08:09:28 +00:00
Thomas Adam
4f88344df3 Merge branch 'obsd-master' 2015-11-12 14:01:14 +00:00
nicm
a209ea3953 Add utf8_padcstr and use it to align columns in list-keys. 2015-11-12 12:43:36 +00:00
nicm
d6daf37df4 Tidy utf8.c a little: build table on first use, and make utf8_width take 
a u_int rather than splitting and then combining again in utf8_split.
 2015-11-12 12:19:57 +00:00
Thomas Adam
5f483499f3 Merge branch 'obsd-master' 2015-11-12 12:01:17 +00:00
nicm
c41673f3fa If we know the terminal outside tmux is not UTF-8, replace UTF-8 in 
error messages and whatnot with underscores the same as we do when we
draw UTF-8 characters as part of the screen.
 2015-11-12 11:10:50 +00:00
nicm
1b86f520ea Nuke the utf8 and status-utf8 options and make tmux only a UTF-8 
terminal. We still support non-UTF-8 terminals outside tmux, but inside
it is always UTF-8 (as when the utf8 and status-utf8 options were on).
 2015-11-12 11:09:11 +00:00
nicm
69e0b8326a Support UTF-8 key bindings by expanding the key type from int to 
uint64_t and converting UTF-8 to Unicode on input and the reverse on
output. (This allows key bindings, there are still omissions - the
largest being that the various prompts do not accept UTF-8.)
 2015-11-12 11:05:34 +00:00
Thomas Adam
c975de2e07 Merge branch 'obsd-master' 
Conflicts:
	server.c
 2015-10-31 23:56:35 +00:00
nicm
abb4e9e2fa The output log is only useful once and it means creating a file, so open 
it once at startup instead of in every call to tty_open.
 2015-10-31 13:12:03 +00:00
Thomas Adam
17f6c3be8e Merge branch 'obsd-master' 2015-10-31 10:01:12 +00:00
nicm
01defc9f49 Because pledge(2) does not allow us to pass directory file descriptors 
around, we can't use file descriptors for the working directory because
we will be unable to pass it to a privileged process to tell it where to
read or write files or spawn children. So move tmux back to using
strings for the current working directory. We try to check it exists
with access() when it is set but ultimately fall back to ~ if it fails
at time of use (or / if that fails too).
 2015-10-31 08:13:58 +00:00
Thomas Adam
a5e4d3a2d8 Merge branch 'obsd-master' 2015-10-28 12:01:11 +00:00
nicm
bf9c933cae Like options, move the environ struct into environ.c. 2015-10-28 09:51:55 +00:00
Thomas Adam
da1f6fc2c8 Merge branch 'obsd-master' 
Conflicts:
	Makefile
	client.c
	server-client.c
	server.c
	tmux.c
	tmux.h
 2015-10-27 23:27:26 +00:00
nicm
44657bf932 Move struct options into options.c. 2015-10-27 15:58:42 +00:00
nicm
07b0ea03c3 Break the common process set up, event loop and imsg dispatch code 
between server and client out into a separate internal API. This will
make it easier to add another process.
 2015-10-27 13:23:24 +00:00
Thomas Adam
ca29903c82 Merge branch 'obsd-master' 2015-10-26 00:01:10 +00:00
nicm
e65306d8e7 Extend the modifiers allowed before formats: as well as the existing 
#{=10:...}  length limit, add #{t:...} to convert a time_t format to a
string, #{b:...} for basename and #{d:...} for dirname. Remove all the
foo_string time formats as they can now be replaced by "t:", for example
#{window_activity_string} becomes #{t:window_activity}.
 2015-10-25 22:29:17 +00:00
Thomas Adam
4acc8d0ff5 Merge branch 'obsd-master' 
Conflicts:
	cmd-find.c
 2015-10-25 09:21:37 +00:00
nicm
14da999408 Format for scroll position, from Jorge Morante. 2015-10-23 16:02:21 +00:00
Thomas Adam
bbdc08780c Merge branch 'obsd-master' 2015-10-18 22:01:08 +01:00
nicm
174a2ad731 Pass current directory as a string rather than a file descriptor because 
pledge doesn't let us pass directory file descriptors.
 2015-10-18 20:42:42 +00:00
Thomas Adam
20c3adca41 Merge branch 'obsd-master' 2015-09-25 18:01:09 +01:00
nicm
28f23f18e9 Free the history when it is cleared, based on a diff from Carlo Cannas. 2015-09-25 15:53:07 +00:00
Thomas Adam
a3bce7a322 Merge branch 'obsd-master' 2015-09-17 00:01:08 +01:00
nicm
a4b4b29987 Rename cmd_q dead flag to a general flags bitmask (will be more flags later). 2015-09-16 22:24:54 +00:00
Thomas Adam
4afe26fa82 Merge branch 'obsd-master' 2015-09-14 14:01:09 +01:00
nicm
8da6de3e66 Style nit, int for flags not u_int. 2015-09-14 11:57:22 +00:00
Thomas Adam
74b958ecbe Merge branch 'obsd-master' 
Conflicts:
	Makefile
 2015-09-14 12:42:19 +01:00
nicm
af16ce6ad9 When the active pane changes, redraw panes if the style has 
changed. From Cam Hutchison.
 2015-09-14 11:34:50 +00:00
nicm
16efa84838 Make refresh-client force update of jobs, from Sina Siadat. 2015-09-14 10:25:52 +00:00
nicm
901c2eb20a Add copy-mode -e to exit copy mode when scrolling off the bottom, useful 
for quick view of history, from Cam Hutchison.
 2015-09-13 13:31:40 +00:00
nicm
a3de5dbab1 Merge delete-buffer into cmd-set-buffer.c and change the paste buffer 
API so it has one paste_free() rather than free_top and free_name
(everywhere that uses it already has the right pointer).
 2015-09-11 14:41:50 +00:00
Nicholas Marriott
66c4ed98d6 Fix bad merge. 2015-09-10 14:59:16 +01:00
Thomas Adam
1fd756066c Merge branch 'obsd-master' 2015-09-10 12:01:08 +01:00
nicm
cfabe30bec Add session_last_attached time and format, from Sina Siadat. 2015-09-10 08:58:14 +00:00
Thomas Adam
76688d2040 Merge branch 'obsd-master' 
Conflicts:
	cfg.c
	tmux.c
 2015-09-06 20:47:50 +01:00
nicm
38e3baab2a A one line helper function is a little silly. 2015-09-02 17:43:25 +00:00
nicm
8121127606 We no longer need the terminal service class, so don't bother asking for it. 2015-09-02 17:37:54 +00:00
nicm
69a2d46ee5 Remove dead_clients which is no longer used. 2015-09-01 11:13:39 +00:00
nicm
952ba84611 Work out config file when needed not at startup. 2015-09-01 10:10:59 +00:00
nicm
83157c02d6 Move initial conf load into cfg.c. 2015-09-01 10:01:56 +00:00
nicm
2a836bc306 All the cmd_*_entry declarations do not need to be in tmux.h. 2015-09-01 09:48:34 +00:00
nicm
6a539c00df Path from $TMUX does not need to be global anymore. 2015-08-30 22:56:36 +00:00
nicm
c6e9160c67 Login shell can be a client flag, and move the exec code into client.c. 2015-08-30 22:40:25 +00:00
nicm
dd92b6e83d Event base does not need to be global. 2015-08-30 22:19:07 +00:00
Thomas Adam
cb89f2f2a1 Merge branch 'obsd-master' 
Conflicts:
	Makefile
	format.c
 2015-08-30 21:44:01 +01:00
nicm
5047670693 Remove some old prototypes and unused functions. 2015-08-29 23:55:55 +00:00
nicm
52bbac506c struct args_entry can go into arguments.c. 2015-08-29 23:19:52 +00:00
nicm
373ef850e0 paste_send_pane can be merged into cmd-paste-buffer.c now. 2015-08-29 09:36:46 +00:00
nicm
b569585000 Move struct paste_buffer out of tmux.h. 2015-08-29 09:25:00 +00:00
nicm
b5aaefc727 Move alerts onto events rather than checking every loop. 2015-08-29 08:30:54 +00:00
nicm
b7861f34ba Better take on reducing the name timer. Again check for name changes in 
the main loop after events that may have changed the pane, but do so at
most once every 500 millis. If the pane changed too soon, use a timer to
ensure that a check happens later.
 2015-08-29 00:29:15 +00:00
nicm
55b8d74561 Revert previous; we do need a timer, until I have a better idea. We 
can't do the name check every loop, because that is too expensive, and
we can't make sure it only happens infrequently because we have no idea
when the next change will happen.
 2015-08-28 16:10:46 +00:00
nicm
e2100c5f5f We now only checking for name changes when the active pane has changed, 
but that can only happen when we have already been woken up by a read
event, so there is no need for a timer, we can just check the changed
flag on the end of that read event (we already loop over the windows to
check for bells etc anyway).
 2015-08-28 15:51:48 +00:00
Thomas Adam
486421ceff Merge branch 'obsd-master' 2015-08-28 16:01:09 +01:00
nicm
f6a0f8730e Per-session timers for locking, and remove the global one-second timer. 2015-08-28 13:12:20 +00:00
Thomas Adam
84eabb2658 Merge branch 'obsd-master' 2015-08-28 14:01:11 +01:00
nicm
57cc4d45d5 Make session_update_activity more useful and use it in more places. 2015-08-28 13:01:03 +00:00
nicm
6419f66523 Give clock mode its own timer. 2015-08-28 12:25:42 +00:00
nicm
75d10058a4 Run status update on a per-client timer at status-interval. 2015-08-28 12:16:28 +00:00
nicm
b6618b631b Move format job cleanup onto its own timer. 2015-08-28 11:38:27 +00:00
Thomas Adam
031d7ce840 Merge branch 'obsd-master' 2015-08-28 10:01:08 +01:00
nicm
fc58e44f89 Only do the automatic-rename dance if the pane has changed (seen output, 
or new active pane).
 2015-08-28 07:49:24 +00:00
Thomas Adam
73b4d098ce Merge branch 'obsd-master' 2015-07-29 14:01:09 +01:00
nicm
5ec3621101 status_out and associated data structures are no longer used. 2015-07-29 11:56:02 +00:00
Thomas Adam
a568aaa0c0 Merge branch 'obsd-master' 2015-07-28 18:01:08 +01:00
nicm
b254115acd Tidy up the way terminals are described and move some structs out of tmux.h. 2015-07-28 15:18:10 +00:00
Thomas Adam
18a64ad52d Merge branch 'obsd-master' 2015-07-20 18:01:10 +01:00
nicm
92af3766ec Add an option (history-file) for a file to save/restore command prompt 
history, from Olof-Joachim Frahm.
 2015-07-20 15:50:04 +00:00
Thomas Adam
07aef38591 Merge branch 'obsd-master' 2015-07-13 18:01:09 +01:00
nicm
e45d624df2 Fix line endings. 2015-07-13 15:51:31 +00:00
nicm
c7374c31c4 Initialize cwd fd to -1 so that we don't close fd 0 if the client is 
destroyed before it is changed. Also allow ttyname() to fail. Fixes
problems when running out of file descriptors reported by Bruno Sutic.
 2015-07-13 15:49:31 +00:00
Thomas Adam
21a2ccc5f1 Merge branch 'obsd-master' 2015-06-17 20:01:12 +01:00
Thomas Adam
a584e11d6b Merge branch 'obsd-master' 2015-06-17 18:01:07 +01:00
nicm
0ff335961e Move the shuffle code from new-window -a into a function and add a -a 
flag for move-window too. From Thomas Adam.
 2015-06-17 16:50:28 +00:00
nicm
021cdbe1c0 Use an explicit job state instead of avoid closing our side of the 
socketpair and setting it to -1 to mark when the other side is
closed. This avoids closing it while the libevent bufferevent still has
it (it could try to add it to the polled set which some mechanisms don't
like). Fixes part a problem reported by Bruno Sutic.
 2015-06-17 16:44:49 +00:00
Thomas Adam
9fdc3a069a Merge branch 'obsd-master' 2015-06-15 14:01:09 +01:00
nicm
d96ab34019 Add window_activity format, from Thomas Adam based on a diff originally 
from propos6 at gmail dot com.
 2015-06-15 10:58:01 +00:00
Thomas Adam
37005d04a9 Merge branch 'obsd-master' 2015-06-14 12:01:10 +01:00
nicm
29c29e7717 Add a format for client PID (client_pid) and server PID (pid). Diff for 
client_pid from Thomas Adam.
 2015-06-14 10:07:44 +00:00
Thomas Adam
7acc4addb5 Merge branch 'obsd-master' 
Conflicts:
	client.c
	tmux.1
	tmux.c
 2015-06-07 23:42:25 +01:00
nicm
c4e811e519 Add -E flag when attaching or switching client to bypass 
update-environment, from Steven Lu.
 2015-06-07 21:39:39 +00:00
nicm
55b96a5bd5 Handle the RGB colour escape sequence (\033[38;2;<r>;<g>;<b>m and 48;2) 
like xterm(1) does, by mapping to the nearest in the 256 colour palette.
 2015-06-05 22:33:39 +00:00
nicm
641a9cd3f5 Similarly, for sessions use a callback to free rather than checking 
every loop.
 2015-06-05 18:18:32 +00:00
nicm
10e90ae01f Change deref to the more sensible unref, and add a couple I missed before. 2015-06-05 18:06:30 +00:00
nicm
8c93b768e4 Instead of putting dead clients on a list and checking it every loop, 
use event_once to queue a callback to deal with them. Also dead clients
with references would never actually be freed because the wrap-up
functions (the callback for stdin, or status_prompt_clear) would never
be called. So call them in server_client_lost.
 2015-06-05 18:01:12 +00:00
nicm
6b2129696f Move the nested check from client to server and compare the client tty 
name to all the pane pty names instead of comparing socket paths. This
means that "new -d" will work without unsetting $TMUX.
 2015-06-04 23:27:51 +00:00
Thomas Adam
02e348c069 Merge branch 'obsd-master' 2015-06-04 12:59:41 +01:00
nicm
a863834574 Add support for a single "marked pane". There is one marked pane in the 
server at a time; it may be toggled or cleared with select-pane -m and
-M (the border is highlighted). A new target '~' or '{marked}' specifies
the marked pane to commands and it is the default target for the
swap-pane and join-pane -s flag (this makes them much simpler to use -
mark the source pane and then change to the target pane to run swapp or
joinp).
 2015-06-04 11:43:51 +00:00
Thomas Adam
beffdf6575 Merge branch 'obsd-master' 2015-05-27 16:01:22 +01:00
nicm
379400cfa6 Move the jobs output cache into the formats code so that #() work more 
generally (for example, again working in set-titles-string).
 2015-05-27 13:28:04 +00:00
Thomas Adam
00471dc783 Merge branch 'obsd-master' 2015-05-13 09:44:11 +01:00
nicm
3f4ee98162 To replace c0-*, add a high watermark to the pty event, and also backoff 
when the any of the ttys the pane is going to write to has buffered
enough data.
 2015-05-12 22:40:38 +00:00
nicm
e958db09a7 Add bell-action "other" to pass through bells in all windows except the 
current, suggested by Jan ONDREJ.
 2015-05-12 15:27:46 +00:00
nicm
44364d7112 Remove the c0-* options which never really worked satisfactorily. Going 
to try something else...
 2015-05-11 10:10:16 +00:00
Thomas Adam
504b97b6a4 Merge branch 'obsd-master' 
Conflicts:
	tmux.h
 2015-05-09 12:52:38 +01:00
nicm
92faa2eaeb Put the tty structs together, and tabify. 2015-05-08 16:48:12 +00:00
nicm
592cb73a69 grid_marker_cell is no longer used. 2015-05-08 16:44:03 +00:00
nicm
74b2c40b1b mode_key_entry can go into mode-key.c; also a few spaces->tabs. 2015-05-08 16:33:29 +00:00
nicm
a538141a72 window_choose_mode_item can move into window-choose.c. 2015-05-08 16:23:34 +00:00
nicm
c4a4bd6ac5 Move input parser structs into input.c (removing fairly useless 
saved_cursor_[xy] formats as a side-effect).
 2015-05-08 16:18:04 +00:00
nicm
1282bb81fe array.h can be local to window-choose.c now. 2015-05-07 08:08:54 +00:00
nicm
0b39e6427f Remove ARRAY_* from history and expand completion to complete a) layout 
names and b) targets beginning with -t or -s.
 2015-05-06 23:56:46 +00:00
Thomas Adam
f10d3675f8 Merge branch 'obsd-master' 2015-05-06 10:03:52 +01:00
nicm
31b1ab4852 Add a format window_linked which is 1 if a window has been linked 
multiple times, also remove the default space in window_flags and use a
conditional to add it in window-status-format (this means additional
flags can be added in the option without extra spaces). From Thomas Adam
with tweaks by me.
 2015-05-06 08:35:39 +00:00
Thomas Adam
dc2adc6bc1 Merge branch 'obsd-master' 2015-04-28 14:57:15 +01:00
nicm
771744426e Add select-layout -o to undo the last layout change (apply the previously 
set layout).
 2015-04-28 10:43:13 +00:00
Thomas Adam
94a8ef1cae Merge branch 'obsd-master' 
Conflicts:
	Makefile
	tmux.1
 2015-04-27 21:21:55 +01:00
nicm
95195f5258 Rewrite of the target resolution internals to be simpler and more 
consistent but with much less duplication, but keeping the same internal
API. Also adds more readable aliases for some of the special tokens used
in targets (eg "{start}" instead of "^"). Some behaviours may have
changed, for example prefix matches now happen before fnmatch.
 2015-04-27 16:25:57 +00:00
Thomas Adam
72e9ebf2ec Merge branch 'obsd-master' 2015-04-25 20:45:02 +00:00
nicm
07dfdb974d Make message log a TAILQ. 2015-04-25 18:33:59 +00:00
nicm
6dbd63ba4f Move the functions to convert ids from strings into session.c and window.c. 2015-04-25 18:09:28 +00:00
Thomas Adam
56e1132db4 Merge branch 'obsd-master' 2015-04-25 10:02:46 +00:00
nicm
aeedb464a6 Convert clients list into a TAILQ. 2015-04-24 23:17:11 +00:00
nicm
583b4ab72b Set working directory for run-shell and if-shell. 2015-04-24 22:19:36 +00:00
nicm
9a453dd354 Make session_has return a flag, returning the first winlink found is a 
recipe for errors.
 2015-04-22 15:32:33 +00:00
nicm
8d66f4fba4 Change the windows array into an RB tree and fix some places where we 
were only looking at the first winlink for a window in a session.
 2015-04-22 15:30:11 +00:00
nicm
89e80cabd5 window_index is only used in one place (window_destroy) so inline it there. 2015-04-22 15:05:03 +00:00
Thomas Adam
0a88377086 Merge branch 'obsd-master' 2015-04-22 10:05:54 +01:00
nicm
69f292a90e Always format real layout even when zoomed. 2015-04-21 22:38:49 +00:00
nicm
bded743706 Support for multiple key tables to commands to be bound to sequences of 
keys. The default key bindings become the "prefix" table and -n the
"root" table. Keys may be bound in new tables with bind -T and
switch-client -T used to specify the table in which the next key should
be looked up. Based on a diff from Keith Amling.
 2015-04-20 15:34:56 +00:00
Thomas Adam
b25dc423b0 Merge branch 'obsd-master' 2015-04-20 15:44:27 +01:00
nicm
bf635e7741 Rewrite of tmux mouse support which was a mess. Instead of having 
options for "mouse-this" and "mouse-that", mouse events may be bound as
keys and there is one option "mouse" that turns on mouse support
entirely (set -g mouse on).

See the new MOUSE SUPPORT section of the man page for description of the
key names and new flags (-t= to specify the pane or window under mouse
as a target, and send-keys -M to pass through a mouse event).

The default builtin bindings for the mouse are:

    bind -n   MouseDown1Pane select-pane -t=; send-keys -M
    bind -n MouseDown1Status select-window -t=
    bind -n   MouseDrag1Pane copy-mode -M
    bind -n MouseDrag1Border resize-pane -M

To get the effect of turning mode-mouse off, do:

    unbind -n MouseDrag1Pane
    unbind -temacs-copy MouseDrag1Pane

The old mouse options are now gone, set-option -q may be used to
suppress warnings if mixing configuration files.
 2015-04-19 21:34:21 +00:00
nicm
ee123c2489 Support setting the default window and pane background colours (window 
and active pane via window-style and window-active-style options, an
individual pane by a new select-pane -P flag). From J Raynor.
 2015-04-19 21:05:27 +00:00
Thomas Adam
833fe5bdee Merge branch 'obsd-master' 
Conflicts:
	cmd-pipe-pane.c
 2015-02-06 19:07:43 +00:00
nicm
313f2263f8 status_replace can now become local to status.c and it no longer needs 
the jobsflag argument. While here there is no need to repeat work that
format_defaults already does.
 2015-02-06 17:21:08 +00:00
nicm
03758a50dc Add format_expand_time and use it instead of status_replace where 
command execution is not needed.
 2015-02-06 17:11:39 +00:00
nicm
4946f74253 Wrap all the individual format_* calls in a single format_defaults 
functions.
 2015-02-05 10:29:43 +00:00
nicm
e5d9ceff18 There is no need to save the guard state because the function checks it 
again anyway.
 2015-02-05 10:26:29 +00:00
nicm
c9642ee213 Remove two unused arguments from status_replace. 2015-02-01 23:43:23 +00:00
nicm
16bdd970dc Support blinking cursor mode, both the xterm CSI ?12 h/l and (the 
backwards) screen CSI 34 h/l. From Guanpeng Xu.
 2015-01-20 08:18:04 +00:00
Thomas Adam
5f8138faf5 Merge branch 'obsd-master' 
Conflicts:
	format.c
 2014-12-19 19:22:19 +00:00
nicm
7a0c94b28a Add pane_dead_status for exit status of dead panes. 2014-12-09 19:23:35 +00:00
Thomas Adam
ccbe2545d9 Merge branch 'obsd-master' 2014-12-03 08:41:08 +00:00
nicm
575fd1e322 Permit option values to be used in formats. 2014-12-02 23:19:45 +00:00
nicm
c403bfc894 Remove dead code, from Thomas Adam. 2014-11-30 08:03:29 +00:00
Thomas Adam
3e8efcc555 Merge branch 'obsd-master' 2014-11-19 09:22:03 +00:00
nicm
e0929262db Label windows which are smaller than expected with a reason. 2014-11-14 02:19:47 +00:00
Thomas Adam
fc05bf255a Merge branch 'obsd-master' 2014-11-09 00:15:51 +00:00
Nicholas Marriott
747cab4281 No need for $Id$ now. 2014-11-08 12:27:43 +00:00
nicm
e4bf1e5128 Add V for select line with vi(1) keys. From Juho Pohjala. 2014-11-06 09:17:25 +00:00
Thomas Adam
35ffd093d7 Merge branch 'obsd-master' 
Conflicts:
	Makefile
	cmd-link-window.c
	cmd-unlink-window.c
 2014-10-29 12:51:21 +00:00
nicm
b496b1fe11 Move cfg_causes local into cfg.c and remove struct causelist. 2014-10-27 22:23:47 +00:00
nicm
68cb1c0e6b Merge unlink-window into kill-window. 2014-10-22 23:11:41 +00:00
nicm
a02c2e55c0 Only redraw pane when it has actually changed. 2014-10-21 22:22:04 +00:00
Thomas Adam
562af864bd Merge branch 'obsd-master' 
Conflicts:
	Makefile
	cmd-list-commands.c
	cmd-suspend-client.c
	job.c
	tmux.h
	xmalloc.c
 2014-10-21 07:11:44 +01:00
nicm
0a1a88d63c Better format for printf format attributes. 2014-10-20 23:57:13 +00:00
nicm
4c42381410 Move template defines back into .c files. 2014-10-20 23:35:28 +00:00
nicm
900f6fc17e Tidy up some includes. 2014-10-20 23:27:14 +00:00
nicm
45dfc5a074 Instead of setting up the default keys by building the key struct 
directly with a helper function in the cmd_entry, include a table of
bind-key commands and pass them through the command parser and a
temporary cmd_q.

As well as being smaller, this will allow default bindings to be command
sequences which will probably be needed soon.
 2014-10-20 22:29:25 +00:00
nicm
a27ba6e380 Add xreallocarray and remove nmemb argument from xrealloc. 2014-10-08 17:35:58 +00:00
Thomas Adam
2874a431c0 Merge branch 'obsd-master' 2014-09-25 11:29:54 +01:00
nicm
733cea8847 Wake up any clients waiting with the wait-for command when the server 
exits.
 2014-09-01 21:58:41 +00:00
nicm
4e956d545a Various minor style and spacing nits. 2014-09-01 21:50:18 +00:00
nicm
29d20a55b6 Fix two copy mode problems: 
1. In vi mode the selection doesn't include the last character if you
   moved the cursor up or left.
2. In emacs mode the selection includes the last character if you moved
   the cursor to the left.

From Balazs Kezes.
 2014-08-11 22:18:16 +00:00
nicm
f518a077b1 Add flags to selectp to enable and disable input to a pane, from Anish 
Athalye.
 2014-08-11 22:14:30 +00:00
Thomas Adam
a131b82e95 Merge branch 'obsd-master' 
Conflicts:
	client.c
 2014-08-09 20:31:36 +01:00
nicm
1ac96200a7 Remove support for the continuous reporting "any" mouse mode which never 
really worked properly and is rarely used.
 2014-08-09 07:33:37 +00:00
nicm
2056a9ef9e Drop explicit support for F13-F20 and change to match the xterm terminfo 
entry:

        F13-F24 are S-F1 to S-F12
        F25-F36 are C-F1 to C-F12
        F37-F48 are C-S-F1 to C-S-F12
        F49-F60 are M-F1 to M-F12
and     F61-F63 are M-S-F1 to M-S-F3

This should be no difference for applications inside tmux, but means
that any key binding for F13 will need to be replaced by S-F1 and so on.
 2014-07-21 10:25:48 +00:00
Thomas Adam
814e40522c Merge branch 'obsd-master' 2014-06-20 12:59:43 +01:00
nicm
21ade85f24 Properly track switching G0 and G1 modes between US-ASCII and VT100 line 
drawing rather than just treating them as SO and SI.
 2014-06-06 13:21:41 +00:00
nicm
53cbae544f Now that cmdlists are reference counted, there is no need for two-step 
deletion via the dead_key_bindings tree. From Keith Amling.
 2014-05-14 06:21:19 +00:00
Thomas Adam
bae95844d7 Merge branch 'obsd-master' 
Conflicts:
	format.c
	window.c
 2014-05-13 21:58:48 +01:00
nicm
b3e8d440ed If multiple arguments are given to new-session, new-window, 
split-window, respawn-window or respawn-pane, pass them directly to
execvp() to help avoid quoting problems. One argument still goes to "sh
-c" like before. Requested by many over the years. Patch from J Raynor.
 2014-05-13 08:08:32 +00:00
nicm
b1a06ef22e Add a copy mode key binding to copy to a named buffer. From J Raynor. 2014-05-13 07:54:20 +00:00
nicm
3dbacbb62b Add support for named buffers. If you don't name a buffer, things work 
much as before - buffers are automatically named "buffer0000",
"buffer0001" and so on and ordered as a stack. Buffers can be named
explicitly when creating ("loadb -b foo" etc) or renamed ("setb -b
buffer0000 -n foo"). If buffers are named explicitly, they are not
deleted when buffer-limit is reached. Diff from J Raynor.
 2014-05-13 07:34:35 +00:00
nicm
f4ffaf5a7f Just use char ** for argv like normal people, not char *const *. 2014-05-09 09:11:24 +00:00
nicm
94ccc6aeaa Instead of forcing mouse scroll to 1 in choose mode, scale it down 
instead. Means modifier keys still increase the line count, just not as
much. Based on a diff from Marcel Partap.
 2014-05-08 07:54:47 +00:00
nicm
540f0b3e45 Both the two previous ways of navigating panes by direction have 
irritating flaws:

a) The old way of always using the top or left if the choice is
ambiguous is annoying when the layout is unbalanced.

b) The new way of remembering the last used pane is annoying if the
layout is balanced and the leftmost is obvious to the user (because
clearly if we go right from the top-left in a tiled set of four we want
to end up in top-right, even if we were last using the bottom-right).

So instead, use a combination of both: if there is only one possible
pane alongside the current pane, move to it, otherwise choose the most
recently used of the choice.
 2014-05-08 06:03:30 +00:00
Thomas Adam
3f54c9292f Merge branch 'obsd-master' 2014-04-24 12:59:00 +01:00
nicm
bec6c807cd There is no longer a need for a paste_stack struct or for global_buffers 
to be global. Move to paste.c.
 2014-04-24 09:14:43 +00:00
Thomas Adam
953c3ef47a Merge branch 'obsd-master' 
Conflicts:
	Makefile
	tmux.1
	window.c
 2014-04-23 11:26:11 +01:00
nicm
806520f025 Add some UTF-8 utility functions and use them to prevent the width limit 
on formats from splitting UTF-8 characters improperly.
 2014-04-17 15:37:55 +00:00
nicm
3e27be353d Set PATH explicitly, either from client or session 
environment. Previously it came from the session environment. From J
Raynor.
 2014-04-17 13:02:59 +00:00
nicm
ada75af199 Don't limit the DCS buffer to 256 bytes, expand it as needed. Requested 
by Suraj Kurapati.
 2014-04-17 12:43:38 +00:00
nicm
2e98c9057d Correct the dance to fix the active pane in join-pane by pulling the 
(right) code from break-pane and window_remove_pane into a helper
function.
 2014-04-17 09:13:13 +00:00
nicm
2740490e27 Remove the "info" message mechanism, this was only used for about five 
mostly useless and annoying messages. Change those commands to silence
on success like all the others. Still accept the -q command line flag
and "quiet" server option for now.
 2014-04-17 07:55:43 +00:00
nicm
992ef70fb6 Remove the monitor-content option and associated bits and bobs. It's 
never worked very well. If there is a big demand for it to return, will
consider better ways to do it.
 2014-04-17 07:36:45 +00:00
nicm
871b83cbab Remove a leftover prototype and fix some spacing. 2014-04-16 21:16:19 +00:00
nicm
14a96df9ee Remove the choose-list command to prepare for some later choose-* work. 2014-04-16 21:02:41 +00:00
Thomas Adam
0c99c7dbff Merge branch 'obsd-master' 
Conflicts:
	Makefile
	tty-keys.c
 2014-04-05 12:36:14 +01:00
nicm
acef311fe3 Work out mouse scroll wheel effect when the mouse is first detected and 
store it in struct mouse_event, reduce the scroll size the 3 but allow
shift to reduce it to 1 and meta and ctrl to multiply by 3 if the
terminal supports them, also support wheel in choose mode. From Marcel
Partap.
 2014-04-03 08:20:29 +00:00
nicm
252a7373d6 Support UTF-8 with choose-buffer, from Kosuke ASAMI. Also make 
buffer_sample bigger to let it trim at window right edge.
 2014-04-02 18:12:18 +00:00
deraadt
d9960b2d4d missed commit matching log.c 2014-04-01 05:50:30 +00:00
nicm
7bdb675469 GRID_DEBUG is no longer needed. 2014-03-31 21:42:27 +00:00
nicm
f155316be7 Remove unused log functions. 2014-03-31 21:42:05 +00:00
nicm
46593e7aa2 Add names for mouse button bits rather than using magic numbers, from 
Marcel Partap.
 2014-03-31 21:40:21 +00:00
nicm
fcdae6925a Use hex constants rather than shifts for mouse events and flags, pointed 
out by Marcel Partap.
 2014-03-31 21:39:59 +00:00
nicm
0e4d1d8493 Add setb -a to append and a copy mode append command, from J Raynor with 
minor changes.
 2014-03-31 21:39:31 +00:00
nicm
b11de5adc7 Make session_attached a count and add session_many_attached flag. 2014-03-31 21:37:55 +00:00
nicm
9368914ee7 Add start-of-list, end-of-list, top-line and bottom-line in choice mode, 
from madmaverick9 at roxxmail dot eu, similar diff a few days later from
Marcel Partap.
 2014-03-31 21:36:43 +00:00
nicm
175f215187 Having three *clock* files is ridiculous, remove clock.c. 2014-03-31 21:34:08 +00:00
Nicholas Marriott
b1a87b2ee4 Remove log_debug2 as well and simplify log.c. 2014-03-07 16:05:29 +00:00
Nicholas Marriott
c5a30513ed GRID_DEBUG is no longer needed. 2014-03-07 15:51:27 +00:00
Nicholas Marriott
ebe7bd7c8b Remove unused log functions. 2014-03-07 15:49:09 +00:00
Nicholas Marriott
23e944c91d Add names for mouse button bits rather than using magic numbers, from Marcel 
Partap.
 2014-03-06 12:00:30 +00:00
Nicholas Marriott
f15fcb6a1d Use hex constants rather than shifts for mouse events and flags, pointed out by 
Marcel Partap.
 2014-03-06 11:53:46 +00:00
Nicholas Marriott
8c0edcbfa3 Add setb -a to append and a copy mode append command, from J Raynor with minor 
changes.
 2014-03-06 11:50:07 +00:00
Nicholas Marriott
b7f6356053 Make session_attached a count and add session_many_attached flag. 2014-03-06 11:25:27 +00:00
Nicholas Marriott
9134e4de1e Add start-of-list, end-of-list, top-line and bottom-line in choice mode, from 
madmaverick9 at roxxmail dot eu, similar diff a few days earlier from Marcel
Partap.
 2014-02-26 22:22:07 +00:00
Nicholas Marriott
582c2671dd Having three *clock* files is ridiculous, remove clock.c. 2014-02-26 21:59:33 +00:00
Nicholas Marriott
4273c1b80e Use utempter to update utmp if it's around for configure, from madmaverick9 at 
roxxmail dot eu.
 2014-02-24 23:07:22 +00:00
nicm
f1828921df Change terminal-overrides to a server option (now that we have them), it 
doesn't make much sense as a session option.
 2014-02-23 00:53:06 +00:00
Thomas Adam
d50e47fc4a Merge branch 'obsd-master' 
Conflicts:
	Makefile
	cmd-server-info.c
	cmd-start-server.c
 2014-01-31 21:39:56 +00:00
nicm
9f02feb9d0 Break up and simplify screen_redraw_screen. 2014-01-31 14:19:24 +00:00
nicm
945339b443 Allow replacing each of the many sets of separate foo-{fg,bg,attr} 
options with a single foo-style option. For example:

    set -g status-fg yellow
    set -g status-bg red
    set -g status-attr blink

Becomes:

    set -g status-style fg=yellow,bg=red,blink

The -a flag to set can be used to add to rather than replace a style. So:

    set -g status-bg red

Becomes:

    set -ag status-style bg=red

Currently this is fully backwards compatible (all *-{fg,bg,attr} options
remain) but the plan is to deprecate them over time.

From Tiago Cunha.
 2014-01-28 23:07:09 +00:00
nicm
c930fd5ff6 Remember the last active pane in the top-bottom or left-right cell so 
that it can be restored when moving back to that cell with selectp
-L/-R/etc. From Suraj N Kurapati.
 2014-01-28 22:19:17 +00:00
nicm
1a0d3cd5d3 Allow attach-session -t to accept a window and pane to select them on 
attach. Based on a diff from J Raynor.
 2014-01-09 14:20:55 +00:00
Thomas Adam
3e498cdb49 Merge branch 'obsd-master' 2013-11-14 07:51:26 +00:00
nicm
7fa55b0419 Key to swap to other end of selection (bound to o with vi keys), from J 
Raynor.
 2013-10-23 11:31:03 +00:00
nicm
bf35441608 Do not run any command line command from the client which starts the 
server until after the configuration file completes. This prevents it
racing against run-shell or if-shell in .tmux.conf that run in the
background.
 2013-10-20 17:28:43 +00:00
nicm
d0566a474a Remove the KERN_PROC_CWD the proc_current_path format (which is the only 
thing that uses it now).
 2013-10-10 12:39:24 +00:00
nicm
c1ccefc62d We accidentally haven't been using $TMUX to work out the session for a 
while and in fact it is less useful that using the client ttyname. So
don't bother and don't pass it from the client. If we need it in future
it is in c->environ.
 2013-10-10 12:29:35 +00:00
nicm
282c5f9644 Alter how tmux handles the working directory to internally use file 
descriptors rather than strings.

- Each session still has a current working directory.

- New sessions still get their working directory from the client that
  created them or its attached session if any.

- New windows are created by default in the session working directory.

- The -c flag to new, neww, splitw allows the working directory to be
  overridden.

- The -c flag to attach let's the session working directory be changed.

- The default-path option has been removed.

To get the equivalent to default-path '.', do:

        bind c neww -c $PWD

To get the equivalent of default-path '~', do:

        bind c neww -c ~

This also changes the client identify protocol to be a set of messages rather
than one as well as some other changes that should make it easier to make
backwards-compatible protocol changes in future.
 2013-10-10 12:26:34 +00:00
nicm
10c38436aa Similarly for MSG_COMMAND - allow full imsg limit not arbitrary 2048. 2013-10-10 12:13:56 +00:00
nicm
6c093010e0 Remove CMD_SENDENVIRON. 2013-10-10 12:09:34 +00:00
nicm
4c9f41f1ad Pass flags into cmdq_guard as an argument since sometimes cmdq->cmd can 
be NULL. Avoids crash when a command in a command client can't be
parsed.
 2013-10-10 11:45:28 +00:00
Nicholas Marriott
e9b09faab2 We accidentally haven't been using $TMUX to work out the session for a while 
and in fact it is less useful that using the client ttyname. So don't bother
and don't pass it from the client. If we need it in future it is in c->environ.
 2013-10-06 22:38:33 +01:00
Nicholas Marriott
4538c269d0 Alter how tmux handles the working directory to internally use file descriptors 
rather than strings.

- Each session still has a current working directory.

- New sessions still get their working directory from the client that created
  them or its attached session if any.

- New windows are created by default in the session working directory.

- The -c flag to new, neww, splitw allows the working directory to be
  overridden.

- The -c flag to attach let's the session working directory be changed.

- The default-path option has been removed.

To get the equivalent to default-path '.', do:

        bind c neww -c $PWD

To get the equivalent of default-path '', do:

        bind c neww -c '#{pane_current_path}'

The equivalent of default-path '~' is left as an exercise for the reader.

This also changes the client identify protocol to be a set of messages rather
than one as well as some other changes that should make it easier to make
backwards-compatible protocol changes in future.
 2013-10-06 21:02:23 +01:00
Nicholas Marriott
fa1375c09f Similarly for MSG_COMMAND - allow full imsg limit not arbitrary 2048. 2013-10-06 00:48:24 +01:00
Nicholas Marriott
f141e9b37a Instead of fixed size buffers for some messages, send only the string length. 2013-10-06 00:28:35 +01:00
Nicholas Marriott
3fba377ddd retcode -> retval for exit message. 2013-10-06 00:18:00 +01:00
Nicholas Marriott
01a4752503 Merge IDENTIFY_* flags with CLIENT_* flags. 2013-10-06 00:10:40 +01:00
Nicholas Marriott
d66cbf20f7 Bump protocol version and add new message types. 2013-10-06 00:06:01 +01:00
Nicholas Marriott
7e4314eccb Remove CMD_SENDENVIRON. 2013-10-06 00:02:52 +01:00
Nicholas Marriott
9389cfbec9 Support -c for new-session, based on code from J Raynor. 2013-10-01 23:48:03 +01:00
Nicholas Marriott
06d101657f No space in lsw -a targets. 2013-08-28 12:59:13 +01:00
Nicholas Marriott
b2fe9bff3f Merge branch 'master' of ssh://git.code.sf.net/p/tmux/tmux-code 2013-08-21 18:03:07 +01:00
Nicholas Marriott
a36da3a878 Remove the barely-used and unnecessary command check() function. 2013-08-21 18:01:40 +01:00
Thomas
c103f2fbcb Clear window->flags when clearing winlinks 
When clearing WINLINK_ALERTFLAGS for all sessions, we must also, for that
window, clear the window->flags as well, otherwise sessions may well still
see flags for winlinks long since cleared.

This therfore introduces WINDOW_ALERTFLAGS to help with this.
 2013-08-20 13:03:53 +01:00
Nicholas Marriott
23519fc0b4 Add automatic-rename-format option allowing automatic rename to use something 
other than pane_current_command.
 2013-08-19 22:16:11 +01:00
Nicholas Marriott
1c271852fc Pass flags into cmdq_guard as an argument since sometimes cmdq->cmd can be 
NULL. Avoids crash when a command in a command client can't be parsed.
 2013-08-01 23:35:03 +01:00
Nicholas Marriott
e8567098a4 Add support for Cgywin, apparently it is enough just to open the tty again in 
the server and fd passing is not necessary. Needs some ifdefs unfortunately but
no way around that and some of them can go next time we're willing to do a
protocol bump. Patch from J Raynor jxraynor at gmail dot com.
 2013-07-12 22:21:42 +01:00
Thomas Adam
bdea2f9eda Merge branch 'obsd-master' 2013-07-06 11:18:49 +01:00
Nicholas Marriott
f884fff869 Implement s, S, C mode switch commands in vi(1) mode, from Ben Boeckel. 2013-07-05 14:38:23 +00:00
Nicholas Marriott
c7a121cfc0 Focus events can cause trouble if left on and they can't be turned off 
during idle periods (like the other states are) because we'd miss
events. So add a server option to control them. Defaults to off.
 2013-06-28 20:55:16 +01:00
Nicholas Marriott
828145456c Don't set TMUX_CONF in tmux.h. 2013-06-25 09:48:09 +01:00
Nicholas Marriott
3977dba761 Focus events can cause trouble if left on and they can't be turned off 
during idle periods (like the other states are) because we'd miss
events. So add a server option to control them. Defaults to off.
 2013-06-23 13:10:46 +00:00
Thomas Adam
06b5805479 Merge branch 'obsd-master' 2013-06-13 18:12:49 +01:00
Nicholas Marriott
13441e8cb8 The actual terminfo entries we ended up with for cursor changes are Cs, 
Ce, Ss and Se (not Cc, Ce, Cs, Csr). So use and document these instead
of the ones we were using earlier.
 2013-06-02 07:52:15 +00:00
Thomas Adam
399d7380a5 Merge branch 'obsd-master' 2013-05-31 21:44:42 +01:00
Nicholas Marriott
a0cf65db77 Instead of eating 1024 bytes or so for the arguments of each command, 
save memory by using an RB tree. From Tiago Cunha.
 2013-05-31 12:19:34 +00:00
Thomas Adam
76cb088d16 Merge branch 'obsd-master' 
Conflicts:
	tmux.h
 2013-05-25 11:48:12 +01:00
Nicholas Marriott
e323101ede Rename global configuration define. 2013-04-24 10:01:32 +00:00
Nicholas Marriott
ce52e45d44 Merge branch 'master' of ssh://git.code.sf.net/p/tmux/tmux-code 2013-04-24 11:00:32 +01:00
Nicholas Marriott
4f3c31a6b6 Use sysconfdir for the location of global tmux.conf (but default it to /etc), 
based on changes from Dagobert Michelsen.
 2013-04-24 10:57:03 +01:00
Thomas Adam
cd60e57b6a Merge branch 'obsd-master' 
Sync from OpenBSD.
 2013-04-23 08:26:04 +01:00
Nicholas Marriott
3d2b7d5bce When using choose-tree -u, start with the current window 
highlighted. From Thomas Adam.
 2013-04-22 22:17:29 +00:00
Thomas Adam
b58bca9a72 Merge branch 'obsd-master' 
Conflicts:
	tmux.c
 2013-04-13 17:05:49 +01:00
Nicholas Marriott
982354765b Remove tmux's (already minimal) 88 colour support. Such terminals are 
few and unnecessary.
 2013-03-27 11:17:12 +00:00