e36f932f62
Fix up winlink lists after swap-window.
2016-12-14 17:38:59 +00:00
b851c628f4
-N without arguments needs to set prefix count for the mode command, so
...
that M-1 etc work. Reported by Theo Buehler.
2016-12-11 22:55:25 +00:00
bee95bf378
Spacing nits.
2016-12-09 21:39:27 +00:00
2a7b4bb017
Fix send-keys with UTF-8.
2016-12-08 22:15:37 +00:00
5819d2a9d7
Do not clear the prompt when a message is shown, just leave it around and
...
return to it when the message is finished.
2016-12-07 23:03:04 +00:00
5ea143f521
Only skip moving the cursor if it is already in the last position _on
...
the same line_, fixes redraw bug reported by patrick keshishian.
2016-12-07 09:16:55 +00:00
a8f3ad4487
Make prefix work in all tables (except the prefix table). Users who want
...
to avoid this can set prefix to "none" and bind send-prefix
themselves. Allows C-b t be bound in the copy mode tables again, pointed
out by millert@.
2016-12-07 09:16:13 +00:00
1a6156d8fd
Fix check for cursor at end of line.
2016-11-30 13:20:02 +00:00
6b46c62bb4
Make send -N work for all keys, not just in copy mode. From Artem Fokin.
2016-11-29 12:54:46 +00:00
9fc925ac51
When comparing ocy to orlower in tty_cmd_cell, there is no need to add
...
yoff (because they are both already relative to the pane). Also fix some
other minor nits.
2016-11-28 17:50:00 +00:00
6f8cedb1bc
The mouse valid flag needs to be correct before we fire the dragging
...
callback, so move the callback outside of server_client_check_mouse and
use a new special key code to indicate it.
2016-11-24 18:45:45 +00:00
84319aa8f0
If in the middle of a drag, don't use an invalid key, just use
...
KEYC_MOUSE as a placeholder. Reported by Artem Fokin.
2016-11-24 14:38:55 +00:00
0d1be2e328
Fix so that we work out the right pane from mouse events - we were doing
...
so too early, before the mouse event was necessarily valid, so could end
up using the pane from the previous mouse event, or the active pane.
It is important that we use the right pane now that different panes can
have different key tables (for copy mode).
Fixes problem reported by Greg Hurrell.
2016-11-24 13:46:50 +00:00
7e6c2cb238
Make the selection able to exist independent of the cursor position, so
...
that it is not affected by scrolling. If MouseDragEnd1Pane is bound to
the new "stop-selection" command:
bind -Tcopy-mode MouseDragEnd1Pane stop-selection
A selection made with the mouse will stay as it is after button 1 is
released. (It also works bound to a key.)
From Artem Fokin.
2016-11-24 13:38:44 +00:00
6de466cf8b
For mouse keys, use the mouse pane as the default current pane.
2016-11-23 17:01:24 +00:00
24916f2f6e
Error on invalid modifier keys.
2016-11-23 16:44:42 +00:00
3cf19d6dd0
Key running commands for #() by the unexpanded command, and run them
...
again if the expanded form changes (otherwise at most once per second as
usual). Fixes issues reported by Gregory Pakosz.
2016-11-17 10:06:08 +00:00
ddf7ac5ae4
Fix calculation of whether we need a region for drawing a cell (only if
...
full width and at the edge of the region), otherwise clear the region entirely.
2016-11-16 13:31:22 +00:00
a8e2d851fe
Don't error if renaming a session to its current name, from shik dot
...
chen at gmail dot com.
2016-11-16 11:41:17 +00:00
81f1d625af
Do not stop dragging when the wheel is pressed, from Artem Fokin.
2016-11-16 11:37:16 +00:00
5636d38a9d
Initialize modeprefix to 1 properly in window_pane_create, from Artem Fokin.
2016-11-16 09:22:16 +00:00
e88b74350f
The target validity check used window_pane_visible but that may be false
...
if the pane is zoomed, so instead add a new function to just check if
the pane is actually on screen (most commands still want to accept panes
invisible by zoom). Also reject panes outside the window for various
special targets. Problem reported by Sean Haugh.
2016-11-16 00:24:03 +00:00
c34a79b152
Turn on margins, with a couple of fixes (only limit to the pane for line
...
feeds, and do not move cursor to end for full width panes).
2016-11-15 15:17:28 +00:00
d81a5c630f
And of course I just find a bug, disable previous for now.
2016-11-15 14:08:27 +00:00
0ace779cde
Initial attempt to make use of left and right margins if the terminal
...
supports them (that is, if it advertises itself as a VT420 - probably
just xterm). These are the vertical equivalent of the scroll region and
allow much faster scrolling of panes that do not take up the full width
of the terminal.
2016-11-15 14:02:32 +00:00
9fe43d6acb
Add copy-pipe-and-cancel, from Artem Fokin.
2016-11-15 09:53:23 +00:00
afbf0d42a7
rotate-window needs to unzoom, problem reported by Sean Haugh.
2016-11-14 16:27:12 +00:00
db2412e2ac
Apply the right fix for run -b, used the wrong diff before.
2016-11-12 19:05:53 +00:00
b7398a4918
Do not execute commands for a client until it has identified, fixes
...
problem reported by Frank Terbeck.
2016-11-12 19:04:41 +00:00
36f8fa316d
Do not crash with run-shell -b and no window pane available, reported by
...
Sergei Dyshel.
2016-11-11 11:37:25 +00:00
f947d25c9d
Do not try to set the CHANGED flag on windows with no active pane, fixes
...
problem reported by Nelo-T Wallus.
2016-11-04 18:56:25 +00:00
353439acee
enum values need to fit in 32 bits; we only use enum for numbering and
...
Unicode characters fit in 24 bits, so we can leave key_code as 64 bits
and change KEYC_BASE down to 0x10000000.
2016-11-04 14:47:38 +00:00
382e09bed1
Make an empty state on error rather than leaving something partially
...
created (which now is now a fatal() later).
2016-11-02 13:35:36 +00:00
c83feeb6f8
Clear window alert flags after setting winlink alert flags, fixes problem
...
reported by Tommy Allen.
2016-11-01 09:07:18 +00:00
abea17afd9
Buffer name can be NULL, check before strdup().
2016-10-26 11:48:07 +00:00
99946aaaaf
Do not handle activity or silence alerts in the current window, reported
...
by jasper@.
2016-10-25 07:24:10 +00:00
8084a2c9e6
Add %%% to substitute with quotes escaped (convert " to \"). Use this
...
for the prompts in copy mode. Fixes problems with jumping to ' reported
by Theo Buehler.
2016-10-21 13:51:59 +00:00
99c262b7d0
Do not have a default binding for C-b in copy-mode-vi or it conflicts
...
with the default prefix. Reported by natano@.
2016-10-19 09:24:57 +00:00
899e629bf0
Alerts are too slow, so rather than walking all sessions and windows,
...
add a link of winlinks to each window and a pointer to the session to
each winlink. Also rewrite the alerts processing to return to the old
behaviour (alert in any window sets the flag on any winlink).
2016-10-19 09:22:07 +00:00
bc27451e15
Move session-create hook out of session_create so it works with grouped sessions.
2016-10-19 08:17:11 +00:00
e0e9a54a32
Clear cell entry with grid_default_entry not grid_default_cell.
2016-10-18 19:52:49 +00:00
fb109ae97d
xterm-keys was in the wrong place in the list; Dilyan Palauzov.
2016-10-18 19:25:26 +00:00
a0998e42b7
Make grid_clear_cell set up the entry properly for 256 and RGB cells.
2016-10-18 14:56:17 +00:00
cf7289662f
Tweak a couple of log statements.
2016-10-18 12:51:26 +00:00
2e5c49a1fd
Give each item on queue a name for better logging.
2016-10-18 08:46:43 +00:00
8763bced76
Zero dirty count after flushing.
2016-10-18 08:39:18 +00:00
c2f88373e7
Store the right size in the pipe offset for pipe-pane.
2016-10-18 07:38:16 +00:00
fe106842c8
Use notifys for alerts too.
2016-10-16 22:18:04 +00:00
41e633acf5
Use the notify name string instead of going via an enum and change
...
existing hooks to use notifys instead.
2016-10-16 22:06:40 +00:00
d15d54c2c8
Add hook_session and hook_window formats to get information on the
...
affected session or window when a hook fires. Enable session-created and
session-closed hooks now that that is available.
2016-10-16 19:55:52 +00:00
nicm