circlecloud/tmux
1
0
Fork 0
mirror of https://github.com/tmux/tmux.git synced 2024-11-16 17:39:09 +00:00
Code Issues Projects Releases Wiki Activity
2,347 Commits 3 Branches 37 Tags 31 MiB
bba588752f
Commit Graph

711 Commits

Author SHA1 Message Date
nicm
2627ab322e Remember the number of lines scrolled into the history (versus cleared 
into the history) and when resizing only use scrolled lines and not
cleared lines (which are probably not intended to reappear). From
Chaoren Lin.
 2016-09-02 20:57:20 +00:00
nicm
f8cc48a43f Fix minimum size when pane status line is enabled, reported by Y Petremann. 2016-08-03 09:07:02 +00:00
nicm
9436a31603 Tweak output of environment logging. 2016-07-15 09:52:34 +00:00
nicm
1718420c48 Log environment to new panes. 2016-07-15 09:28:32 +00:00
nicm
0f73af876f Don't update cells in each block of data read from a pane immediately, 
instead track them as change (dirty) and update them once at the end,
saves much time if repeatedly writing the same cell. Also fix comparison
of cells being equal in a few places (memcmp is not enough).
 2016-07-15 00:49:08 +00:00
nicm
325cbe90d9 Allow a command to be specified to display-panes, similar to 
command-prompt, rather than always just selecting the pane.
 2016-06-16 10:55:47 +00:00
nicm
bee3e3e28d Copy mode needs to keep the original grid intact so it can copy from it 
if needed, so it disables reading from the pane. This can be problem
with some programs. So make tmux automatically exit all modes after 180
seconds of inactivity and if there is pending output.
 2016-06-15 09:13:46 +00:00
nicm
aba4438013 Cache selected state so that cells going from selected to unselected are not 
skipped, reported by Omar Sandoval.
 2016-06-06 07:28:52 +00:00
nicm
00cf5fbde6 Insert new panes after the pane being split in the list rather than 
always after the active pane. This is more sensible when doing it with
commands rather than keys.
 2016-06-06 07:24:31 +00:00
nicm
1921fac814 Cache the window styles and do not look up the window-style options 
unless they have changed.
 2016-05-30 09:50:20 +00:00
nicm
fcb00a4161 Use getprogname() instead of __progname to make portability easier. 2016-05-27 17:05:42 +00:00
tim
fdd368a294 - Rework load_cfg() error handling a little. 
- Add -q to source-file to suppress errors about nonexistent files.

Input and OK nicm@
 2016-05-12 16:05:33 +00:00
nicm
4a6eca5bd7 Use the same code for half page scrolling as full, from Michal Mazurek. 2016-05-01 13:39:05 +00:00
nicm
88bd5b15ff tty_client_ready can not be internal to tty.c again. 2016-04-30 18:59:02 +00:00
nicm
0509be0740 Add option to include status text in the pane borders. If 
pane-border-status is set to "top" or "bottom" (rather than "off"),
every pane has a permanent top or bottom border containing the text from
pane-border-format.

Based on a diff sent long ago by Jonathan Slenders, mostly rewritten and
simplified by me.
 2016-04-29 15:00:48 +00:00
nicm
c5443da2d3 The backoff timer is causing no end of trouble with disconnected clients 
stopping data in attached ones. So get rid of it and see how we get on
with just a high watermark on each pane.
 2016-04-29 13:36:10 +00:00
nicm
5f2bfd9807 Make the grid_cell passed into screen_write_* const. 2016-04-29 13:21:33 +00:00
nicm
1cedf78284 Add next/previous paragraph, from J Raynor. 2016-04-27 09:39:09 +00:00
nicm
fa97b0a95b Instead of reusing MouseUp at the finish of a drag, add a new key 
MouseDragEnd. It can be useful to bind them separately in copy mode.
 2016-03-18 07:28:27 +00:00
nicm
b8a102d26f Handle wcwidth() and mbtowc() failures in better style and drop 
characters where we can't find the width (wcwidth() fails) on input, the
same as we drop invalid UTF-8. Suggested by schwarze@.
 2016-03-02 15:36:02 +00:00
nicm
26945d7956 Use system wcwidth() instead of carrying around UTF-8 width tables. 2016-03-01 12:02:08 +00:00
nicm
fa64b89ad7 Whoops, need this for the previous reverse trim commit too. 2016-01-31 09:57:41 +00:00
nicm
427b820426 Support for RGB colour, using the extended cell mechanism to avoid 
wasting unnecessary space. The 'Tc' flag must be set in the external
TERM entry (using terminal-overrides or a custom terminfo entry), if not
tmux will map to the closest of the 256 or 16 colour palettes.

Mostly from Suraj N Kurapati, based on a diff originally by someone else.
 2016-01-29 11:13:56 +00:00
nicm
b5b5221c13 Split out getting the current state from the target search so it can be 
replaced if we already know the current.
 2016-01-19 16:01:30 +00:00
nicm
995af0e2b7 I no longer use my SourceForge address so replace it. 2016-01-19 15:59:12 +00:00
nicm
c9815307eb Add hooks for alerts (bell, silence, activity), from Thomas Adam. 2016-01-16 00:36:53 +00:00
nicm
68d797587e A couple of missing printflike attributes, from Andrey Starodubtsev. 2016-01-15 11:31:47 +00:00
nicm
99e9a4c786 send-keys -R should reset the input parser to ground state (so it can be 
used to escape from, for example, printf '\033]2;').
 2015-12-16 22:05:35 +00:00
nicm
ac9778395f Some hooks API changes to fire a hook while waiting another cmdq and 
infrastructure that will be needed soon.
 2015-12-15 13:43:07 +00:00
nicm
12da13c9d1 Make the marked pane a cmd_find_state. 2015-12-15 00:00:01 +00:00
nicm
d5999f8b5c Use cmd_find_clear_state instead of an extra function doing the same. 2015-12-14 23:30:58 +00:00
nicm
a3129fd4e8 Instead of combined flags for -c, -s, -t, split into different sets 
using an enum and simplify the parsing code.
 2015-12-14 00:31:54 +00:00
nicm
ecfeee2e82 Use member names in cmd_entry definitions so I stop getting confused 
about the order.
 2015-12-13 21:53:57 +00:00
nicm
72948d9f1d -c needs to be able for fail for display-message. 2015-12-13 18:31:47 +00:00
nicm
9f5aca62a9 Use struct cmd_find_state directly and remove cmd_state_flag, also 
change so that winlink is set even if an index is too.
 2015-12-13 17:55:14 +00:00
nicm
9b7697db62 Change cmd_find_target to use a state struct from the caller. 2015-12-13 16:44:35 +00:00
nicm
ff599f4004 Remove the cmd_find_{session,window,pane,index} functions (which are 
just wrappers around cmd_find_target) and just use cmd_find_target
directly.
 2015-12-13 15:32:12 +00:00
nicm
4a4daf1303 Instead of every command resolving the target (-t or -s) itself, prepare 
the state (client, session, winlink, pane) for it it before entering the
command. Each command provides some flags that tell the prepare step
what it is expecting.

This is a requirement for having hooks on commands (for example, if you
hook "select-window -t1:2", the hook command should to operate on window
1:2 not whatever it thinks is the current window), and should allow some
other target improvements.

The old cmd_find_* functions remain for the moment but that layer will
be dropped later.

Joint work with Thomas Adam.
 2015-12-13 14:32:38 +00:00
nicm
5ed17e84fa Add key-table option to set the default key table for a session, allows 
different key bindings for different sessions and a few other things.
 2015-12-12 18:32:24 +00:00
nicm
39cf9c9d31 Allow prefix and prefix2 to be set to None to disable (useful if you 
would rather bind the prefix in the root table).
 2015-12-12 18:19:00 +00:00
nicm
88bc8f3528 Style nits and line wrapping of function declarations. 2015-12-11 16:37:21 +00:00
nicm
bd5918760e We cannot do hooks_find and then hooks_remove because it might have come 
from the parent (global) tree, instead make it remove by name like options.

While here, also tidy up a few bits of options and hooks handling (use
RB_FOREACH_SAFE, and a helper function for the free).
 2015-12-11 15:46:57 +00:00
nicm
01831da5f5 Add cmdq as an argument to format_create and add a format for the 
command name (will also be used for more later).
 2015-12-11 12:27:36 +00:00
nicm
e0f26dcda3 Remove format_create_flags and just pass flags to format_create. 2015-12-08 08:34:18 +00:00
nicm
8f671d3eef Spacing nits. 2015-12-08 08:14:04 +00:00
nicm
d2fb0efcd1 Add hooks infrastructure, basic commands (set-hook, show-hooks) and a 
couple of not very useful client hooks. This will eventually let
commands be run at various points and on notifications. Joint work with
Thomas Adam.
 2015-12-08 01:10:31 +00:00
nicm
b9563340b7 Fix bell indicators across detach, reported by Torbjorn Lonnemark, diff 
from Thomas Adam.
 2015-12-07 09:47:41 +00:00
nicm
6a2ca34216 Do not set a limit on the length of commands when printing them. 2015-11-27 15:06:43 +00:00
nicm
62d3af17f9 Make environ_set va_args and use it to tidy up some calls. Also add a 
missing word in manpage (from jmc).
 2015-11-24 23:46:15 +00:00
nicm
3ff46b2e43 Shell command from -c doesn't have to be global, pass it as an argument. 2015-11-24 23:22:51 +00:00
nicm
c913fb99b6 Tidy the code that works out the socket path, and just use the full path 
in the global socket_path rather than copying it.
 2015-11-24 22:27:22 +00:00
nicm
1e2df2d464 Remove the -I part of show-messages which isn't really that useful; the 
server start time can now be accessed with a new start_time format (use:
tmux display -p '#{t:start_time}')
 2015-11-24 21:52:06 +00:00
nicm
9cccb8c115 Make the log stuff a bit tidier with some helper functions. 2015-11-24 21:19:46 +00:00
nicm
b32ce34cf2 Don't allow options in table without scope set. 2015-11-24 09:34:55 +00:00
nicm
2adf3f42ee Partly revert previous, it is harmless to keep support for UTF-8 mouse 
mode inside tmux, just no longer support it for tmux itself.
 2015-11-23 23:47:57 +00:00
nicm
32e510bd70 Remove support for the UTF-8 mouse extension. This was a briefly used, 
poor idea that was fairly quickly replaced by SGR mouse input (which is
now widespread). It is impossible to tell the difference between UTF-8
and non-UTF-8 mouse input; since the mouse-utf8 option was removed tmux
has not handled it correctly in any case; and it is ridiculous to have
three different forms of mouse input.
 2015-11-23 20:53:09 +00:00
nicm
fce56c56ef Instead of separate tables for different types of options, give each 
option a scope type (server, session, window) in one table.
 2015-11-20 12:01:19 +00:00
nicm
374e273df5 Only assume pasting with at least two characters, reduces problems for 
people who can type ^B c very fast, or who are using tmux inside
something else that buffers.
 2015-11-19 22:46:46 +00:00
nicm
577c0e3e5a Use __unused rather than rolling our own. 2015-11-18 14:27:44 +00:00
nicm
64571368dc Sync the entire xmalloc.[ch] with the other users, but with the addition 
of xrealloc, xvasprintf, xvsnprintf.
 2015-11-18 13:06:54 +00:00
nicm
661d0dfac9 Make key_code unsigned long long not uint64_t which is more portable for 
printf formats, and move UTF8_SIZE define down to near the rest of the
UTF-8 bits.
 2015-11-15 22:50:38 +00:00
nicm
205d15e82d All these return values from utf8_* are confusing, use an enum. 2015-11-14 11:45:43 +00:00
nicm
64333e3ef8 Be more strict about invalid UTF-8. 2015-11-14 10:56:31 +00:00
nicm
c56b81a2ce Push stdout and stderr to clients more aggressively, and add an event to 
continue if the send fails.
 2015-11-14 09:41:06 +00:00
nicm
c5689a5a40 Long overdue change to the way we store cells in the grid: now, instead 
of storing a full grid_cell with UTF-8 data and everything, store a new
type grid_cell_entry. This can either be the cell itself (for ASCII
cells), or an offset into an extended array (per line) for UTF-8
data.

This avoid a large (8 byte) overhead on non-UTF-8 cells (by far the
majority for most users) without the complexity of the shadow array we
had before. Grid memory without any UTF-8 is about half.

The disadvantage that cells can no longer be modified in place and need
to be copied out of the grid and back but it turned out to be lot less
complicated than I expected.
 2015-11-13 08:09:28 +00:00
nicm
a209ea3953 Add utf8_padcstr and use it to align columns in list-keys. 2015-11-12 12:43:36 +00:00
nicm
d6daf37df4 Tidy utf8.c a little: build table on first use, and make utf8_width take 
a u_int rather than splitting and then combining again in utf8_split.
 2015-11-12 12:19:57 +00:00
nicm
c41673f3fa If we know the terminal outside tmux is not UTF-8, replace UTF-8 in 
error messages and whatnot with underscores the same as we do when we
draw UTF-8 characters as part of the screen.
 2015-11-12 11:10:50 +00:00
nicm
1b86f520ea Nuke the utf8 and status-utf8 options and make tmux only a UTF-8 
terminal. We still support non-UTF-8 terminals outside tmux, but inside
it is always UTF-8 (as when the utf8 and status-utf8 options were on).
 2015-11-12 11:09:11 +00:00
nicm
69e0b8326a Support UTF-8 key bindings by expanding the key type from int to 
uint64_t and converting UTF-8 to Unicode on input and the reverse on
output. (This allows key bindings, there are still omissions - the
largest being that the various prompts do not accept UTF-8.)
 2015-11-12 11:05:34 +00:00
nicm
abb4e9e2fa The output log is only useful once and it means creating a file, so open 
it once at startup instead of in every call to tty_open.
 2015-10-31 13:12:03 +00:00
nicm
01defc9f49 Because pledge(2) does not allow us to pass directory file descriptors 
around, we can't use file descriptors for the working directory because
we will be unable to pass it to a privileged process to tell it where to
read or write files or spawn children. So move tmux back to using
strings for the current working directory. We try to check it exists
with access() when it is set but ultimately fall back to ~ if it fails
at time of use (or / if that fails too).
 2015-10-31 08:13:58 +00:00
nicm
bf9c933cae Like options, move the environ struct into environ.c. 2015-10-28 09:51:55 +00:00
nicm
44657bf932 Move struct options into options.c. 2015-10-27 15:58:42 +00:00
nicm
07b0ea03c3 Break the common process set up, event loop and imsg dispatch code 
between server and client out into a separate internal API. This will
make it easier to add another process.
 2015-10-27 13:23:24 +00:00
nicm
e65306d8e7 Extend the modifiers allowed before formats: as well as the existing 
#{=10:...}  length limit, add #{t:...} to convert a time_t format to a
string, #{b:...} for basename and #{d:...} for dirname. Remove all the
foo_string time formats as they can now be replaced by "t:", for example
#{window_activity_string} becomes #{t:window_activity}.
 2015-10-25 22:29:17 +00:00
nicm
14da999408 Format for scroll position, from Jorge Morante. 2015-10-23 16:02:21 +00:00
nicm
174a2ad731 Pass current directory as a string rather than a file descriptor because 
pledge doesn't let us pass directory file descriptors.
 2015-10-18 20:42:42 +00:00
nicm
28f23f18e9 Free the history when it is cleared, based on a diff from Carlo Cannas. 2015-09-25 15:53:07 +00:00
nicm
a4b4b29987 Rename cmd_q dead flag to a general flags bitmask (will be more flags later). 2015-09-16 22:24:54 +00:00
nicm
8da6de3e66 Style nit, int for flags not u_int. 2015-09-14 11:57:22 +00:00
nicm
af16ce6ad9 When the active pane changes, redraw panes if the style has 
changed. From Cam Hutchison.
 2015-09-14 11:34:50 +00:00
nicm
16efa84838 Make refresh-client force update of jobs, from Sina Siadat. 2015-09-14 10:25:52 +00:00
nicm
901c2eb20a Add copy-mode -e to exit copy mode when scrolling off the bottom, useful 
for quick view of history, from Cam Hutchison.
 2015-09-13 13:31:40 +00:00
nicm
a3de5dbab1 Merge delete-buffer into cmd-set-buffer.c and change the paste buffer 
API so it has one paste_free() rather than free_top and free_name
(everywhere that uses it already has the right pointer).
 2015-09-11 14:41:50 +00:00
nicm
cfabe30bec Add session_last_attached time and format, from Sina Siadat. 2015-09-10 08:58:14 +00:00
nicm
38e3baab2a A one line helper function is a little silly. 2015-09-02 17:43:25 +00:00
nicm
8121127606 We no longer need the terminal service class, so don't bother asking for it. 2015-09-02 17:37:54 +00:00
nicm
69a2d46ee5 Remove dead_clients which is no longer used. 2015-09-01 11:13:39 +00:00
nicm
952ba84611 Work out config file when needed not at startup. 2015-09-01 10:10:59 +00:00
nicm
83157c02d6 Move initial conf load into cfg.c. 2015-09-01 10:01:56 +00:00
nicm
2a836bc306 All the cmd_*_entry declarations do not need to be in tmux.h. 2015-09-01 09:48:34 +00:00
nicm
6a539c00df Path from $TMUX does not need to be global anymore. 2015-08-30 22:56:36 +00:00
nicm
c6e9160c67 Login shell can be a client flag, and move the exec code into client.c. 2015-08-30 22:40:25 +00:00
nicm
dd92b6e83d Event base does not need to be global. 2015-08-30 22:19:07 +00:00
nicm
5047670693 Remove some old prototypes and unused functions. 2015-08-29 23:55:55 +00:00
nicm
52bbac506c struct args_entry can go into arguments.c. 2015-08-29 23:19:52 +00:00
nicm
373ef850e0 paste_send_pane can be merged into cmd-paste-buffer.c now. 2015-08-29 09:36:46 +00:00
nicm
b569585000 Move struct paste_buffer out of tmux.h. 2015-08-29 09:25:00 +00:00
nicm
b5aaefc727 Move alerts onto events rather than checking every loop. 2015-08-29 08:30:54 +00:00
nicm
b7861f34ba Better take on reducing the name timer. Again check for name changes in 
the main loop after events that may have changed the pane, but do so at
most once every 500 millis. If the pane changed too soon, use a timer to
ensure that a check happens later.
 2015-08-29 00:29:15 +00:00
nicm
55b8d74561 Revert previous; we do need a timer, until I have a better idea. We 
can't do the name check every loop, because that is too expensive, and
we can't make sure it only happens infrequently because we have no idea
when the next change will happen.
 2015-08-28 16:10:46 +00:00
nicm
e2100c5f5f We now only checking for name changes when the active pane has changed, 
but that can only happen when we have already been woken up by a read
event, so there is no need for a timer, we can just check the changed
flag on the end of that read event (we already loop over the windows to
check for bells etc anyway).
 2015-08-28 15:51:48 +00:00
nicm
f6a0f8730e Per-session timers for locking, and remove the global one-second timer. 2015-08-28 13:12:20 +00:00
nicm
57cc4d45d5 Make session_update_activity more useful and use it in more places. 2015-08-28 13:01:03 +00:00
nicm
6419f66523 Give clock mode its own timer. 2015-08-28 12:25:42 +00:00
nicm
75d10058a4 Run status update on a per-client timer at status-interval. 2015-08-28 12:16:28 +00:00
nicm
b6618b631b Move format job cleanup onto its own timer. 2015-08-28 11:38:27 +00:00
nicm
fc58e44f89 Only do the automatic-rename dance if the pane has changed (seen output, 
or new active pane).
 2015-08-28 07:49:24 +00:00
nicm
5ec3621101 status_out and associated data structures are no longer used. 2015-07-29 11:56:02 +00:00
nicm
b254115acd Tidy up the way terminals are described and move some structs out of tmux.h. 2015-07-28 15:18:10 +00:00
nicm
92af3766ec Add an option (history-file) for a file to save/restore command prompt 
history, from Olof-Joachim Frahm.
 2015-07-20 15:50:04 +00:00
nicm
e45d624df2 Fix line endings. 2015-07-13 15:51:31 +00:00
nicm
c7374c31c4 Initialize cwd fd to -1 so that we don't close fd 0 if the client is 
destroyed before it is changed. Also allow ttyname() to fail. Fixes
problems when running out of file descriptors reported by Bruno Sutic.
 2015-07-13 15:49:31 +00:00
nicm
0ff335961e Move the shuffle code from new-window -a into a function and add a -a 
flag for move-window too. From Thomas Adam.
 2015-06-17 16:50:28 +00:00
nicm
021cdbe1c0 Use an explicit job state instead of avoid closing our side of the 
socketpair and setting it to -1 to mark when the other side is
closed. This avoids closing it while the libevent bufferevent still has
it (it could try to add it to the polled set which some mechanisms don't
like). Fixes part a problem reported by Bruno Sutic.
 2015-06-17 16:44:49 +00:00
nicm
d96ab34019 Add window_activity format, from Thomas Adam based on a diff originally 
from propos6 at gmail dot com.
 2015-06-15 10:58:01 +00:00
nicm
29c29e7717 Add a format for client PID (client_pid) and server PID (pid). Diff for 
client_pid from Thomas Adam.
 2015-06-14 10:07:44 +00:00
nicm
c4e811e519 Add -E flag when attaching or switching client to bypass 
update-environment, from Steven Lu.
 2015-06-07 21:39:39 +00:00
nicm
55b96a5bd5 Handle the RGB colour escape sequence (\033[38;2;<r>;<g>;<b>m and 48;2) 
like xterm(1) does, by mapping to the nearest in the 256 colour palette.
 2015-06-05 22:33:39 +00:00
nicm
641a9cd3f5 Similarly, for sessions use a callback to free rather than checking 
every loop.
 2015-06-05 18:18:32 +00:00
nicm
10e90ae01f Change deref to the more sensible unref, and add a couple I missed before. 2015-06-05 18:06:30 +00:00
nicm
8c93b768e4 Instead of putting dead clients on a list and checking it every loop, 
use event_once to queue a callback to deal with them. Also dead clients
with references would never actually be freed because the wrap-up
functions (the callback for stdin, or status_prompt_clear) would never
be called. So call them in server_client_lost.
 2015-06-05 18:01:12 +00:00
nicm
6b2129696f Move the nested check from client to server and compare the client tty 
name to all the pane pty names instead of comparing socket paths. This
means that "new -d" will work without unsetting $TMUX.
 2015-06-04 23:27:51 +00:00
nicm
a863834574 Add support for a single "marked pane". There is one marked pane in the 
server at a time; it may be toggled or cleared with select-pane -m and
-M (the border is highlighted). A new target '~' or '{marked}' specifies
the marked pane to commands and it is the default target for the
swap-pane and join-pane -s flag (this makes them much simpler to use -
mark the source pane and then change to the target pane to run swapp or
joinp).
 2015-06-04 11:43:51 +00:00
nicm
379400cfa6 Move the jobs output cache into the formats code so that #() work more 
generally (for example, again working in set-titles-string).
 2015-05-27 13:28:04 +00:00
nicm
3f4ee98162 To replace c0-*, add a high watermark to the pty event, and also backoff 
when the any of the ttys the pane is going to write to has buffered
enough data.
 2015-05-12 22:40:38 +00:00
nicm
e958db09a7 Add bell-action "other" to pass through bells in all windows except the 
current, suggested by Jan ONDREJ.
 2015-05-12 15:27:46 +00:00
nicm
44364d7112 Remove the c0-* options which never really worked satisfactorily. Going 
to try something else...
 2015-05-11 10:10:16 +00:00
nicm
92faa2eaeb Put the tty structs together, and tabify. 2015-05-08 16:48:12 +00:00
nicm
592cb73a69 grid_marker_cell is no longer used. 2015-05-08 16:44:03 +00:00
nicm
74b2c40b1b mode_key_entry can go into mode-key.c; also a few spaces->tabs. 2015-05-08 16:33:29 +00:00
nicm
a538141a72 window_choose_mode_item can move into window-choose.c. 2015-05-08 16:23:34 +00:00
nicm
c4a4bd6ac5 Move input parser structs into input.c (removing fairly useless 
saved_cursor_[xy] formats as a side-effect).
 2015-05-08 16:18:04 +00:00
nicm
1282bb81fe array.h can be local to window-choose.c now. 2015-05-07 08:08:54 +00:00
nicm
0b39e6427f Remove ARRAY_* from history and expand completion to complete a) layout 
names and b) targets beginning with -t or -s.
 2015-05-06 23:56:46 +00:00
nicm
31b1ab4852 Add a format window_linked which is 1 if a window has been linked 
multiple times, also remove the default space in window_flags and use a
conditional to add it in window-status-format (this means additional
flags can be added in the option without extra spaces). From Thomas Adam
with tweaks by me.
 2015-05-06 08:35:39 +00:00
nicm
771744426e Add select-layout -o to undo the last layout change (apply the previously 
set layout).
 2015-04-28 10:43:13 +00:00
nicm
95195f5258 Rewrite of the target resolution internals to be simpler and more 
consistent but with much less duplication, but keeping the same internal
API. Also adds more readable aliases for some of the special tokens used
in targets (eg "{start}" instead of "^"). Some behaviours may have
changed, for example prefix matches now happen before fnmatch.
 2015-04-27 16:25:57 +00:00
nicm
07dfdb974d Make message log a TAILQ. 2015-04-25 18:33:59 +00:00
nicm
6dbd63ba4f Move the functions to convert ids from strings into session.c and window.c. 2015-04-25 18:09:28 +00:00
nicm
aeedb464a6 Convert clients list into a TAILQ. 2015-04-24 23:17:11 +00:00
nicm
583b4ab72b Set working directory for run-shell and if-shell. 2015-04-24 22:19:36 +00:00
nicm
9a453dd354 Make session_has return a flag, returning the first winlink found is a 
recipe for errors.
 2015-04-22 15:32:33 +00:00
nicm
8d66f4fba4 Change the windows array into an RB tree and fix some places where we 
were only looking at the first winlink for a window in a session.
 2015-04-22 15:30:11 +00:00
nicm
89e80cabd5 window_index is only used in one place (window_destroy) so inline it there. 2015-04-22 15:05:03 +00:00
nicm
69f292a90e Always format real layout even when zoomed. 2015-04-21 22:38:49 +00:00
nicm
bded743706 Support for multiple key tables to commands to be bound to sequences of 
keys. The default key bindings become the "prefix" table and -n the
"root" table. Keys may be bound in new tables with bind -T and
switch-client -T used to specify the table in which the next key should
be looked up. Based on a diff from Keith Amling.
 2015-04-20 15:34:56 +00:00
nicm
bf635e7741 Rewrite of tmux mouse support which was a mess. Instead of having 
options for "mouse-this" and "mouse-that", mouse events may be bound as
keys and there is one option "mouse" that turns on mouse support
entirely (set -g mouse on).

See the new MOUSE SUPPORT section of the man page for description of the
key names and new flags (-t= to specify the pane or window under mouse
as a target, and send-keys -M to pass through a mouse event).

The default builtin bindings for the mouse are:

    bind -n   MouseDown1Pane select-pane -t=; send-keys -M
    bind -n MouseDown1Status select-window -t=
    bind -n   MouseDrag1Pane copy-mode -M
    bind -n MouseDrag1Border resize-pane -M

To get the effect of turning mode-mouse off, do:

    unbind -n MouseDrag1Pane
    unbind -temacs-copy MouseDrag1Pane

The old mouse options are now gone, set-option -q may be used to
suppress warnings if mixing configuration files.
 2015-04-19 21:34:21 +00:00
nicm
ee123c2489 Support setting the default window and pane background colours (window 
and active pane via window-style and window-active-style options, an
individual pane by a new select-pane -P flag). From J Raynor.
 2015-04-19 21:05:27 +00:00