nicm
e37f34facc
Do not load the config file if the server is exiting because it failed
...
to start, otherwise commands like lsk which start the server again can
end up looping infinitely. Also make the first client exit
correctly. Problem reported by Wael M Nasreddine.
2019-06-07 20:09:17 +00:00
nicm
e128c7fcd8
Replace the various identical error callbacks with a single one in cmd-queue.c.
2019-05-20 11:46:06 +00:00
nicm
78287e27c8
Break new window and pane creation common code from various commands and
...
window.c into a separate file spawn.c.
2019-04-17 14:37:48 +00:00
nicm
bceccc6b63
Move job struct into job.c.
2018-08-23 15:45:05 +00:00
nicm
bd2896b65e
SESSION_UNATTACHED flag is no longer necessary now we have an attached
...
count instead.
2018-08-18 20:08:52 +00:00
nicm
fb1f0fee5a
session_groups can be static also.
2018-08-02 11:56:12 +00:00
nicm
19f3a5c612
Add a missing client-detached hook when the server shuts down, and do
...
not exit until jobs started from run-shell/if-shell have finished (add a
job flags member and a flag to indicate other jobs). GitHub issue 1245.
2018-03-08 08:09:10 +00:00
nicm
623f4b12d3
Add exit-empty option to exit server if no sessions (defaults to on).
2018-02-22 10:54:51 +00:00
nicm
b20a00f93e
Report better error from server when socket create fails, GitHub issue
...
1201.
2017-12-19 15:00:39 +00:00
nicm
a5fd5782f8
Show exit status and time in the remain-on-exit pane text, mostly from
...
Timo Boettcher in GitHub issue 1103.
2017-10-12 11:32:27 +00:00
nicm
932f6cfbfc
Because ignore SIGCHLD early, letting signal_del restore it doesn't work
...
correctly, so set it explicitly back to default (and the others for good
measure).
2017-07-14 18:49:07 +00:00
nicm
51112221ee
Block signals between forking and clearing signal handlers (or calling
...
event_reinit) - if the child gets a signal and fires the libevent signal
handler during this period it could write a signal into the parent's
signal pipe. GitHub issue 1001 from Aaron van Geffen.
2017-07-12 10:04:51 +00:00
nicm
0453ad0146
Move signal code into proc.c.
2017-07-12 09:24:17 +00:00
nicm
58b796608f
Some extra logging to show why tmux might exit.
2017-07-09 22:33:09 +00:00
nicm
28687f2d55
Do not close panes until process has exited and any outstanding data
...
has been written to the pipe-pane event if there is one. GitHub issue 991.
2017-07-03 08:16:03 +00:00
nicm
adf5628087
Support SIGUSR2 to stop and start logging for an existing server. Also
...
we currently only have two log levels so just use -v and -vv rather than
-v and -vvvv, and clarify the man page entry for -v.
2017-06-04 08:25:57 +00:00
nicm
2c9bdd9e32
Memory leaks, from David CARLIER.
2017-04-22 06:13:30 +00:00
nicm
efaf4c16cf
Make the cmd_find_* functions more obvious when looking for a client,
...
rather than having it inside other functions. Should be no change to the
way targets are resolved just yet.
2017-04-21 20:26:34 +00:00
nicm
428be9803c
History needs to be loaded after config parsing is done - now that
...
commands are queued, that's in cfg_done not after start_cfg finishes.
2017-04-21 14:04:54 +00:00
nicm
0b44ad99b5
If a #() command doesn't exit, use its most recent line of output (it
...
must be a full line). Don't let it redraw the status line more than once
a second.
Requested by someone about 10 years ago...
2017-04-20 09:20:22 +00:00
nicm
c6a3446398
Instead of numbering session groups, give them a name which may be given
...
to -t instead of a target session. Also allow them to contain only one
session.
2017-02-09 15:04:53 +00:00
nicm
b7398a4918
Do not execute commands for a client until it has identified, fixes
...
problem reported by Frank Terbeck.
2016-11-12 19:04:41 +00:00
nicm
026ad08b56
Notifys can go via the command queue instead of using their own queue.
2016-10-16 19:15:02 +00:00
nicm
ddc4512d2e
Rewrite command queue handling. Each client still has a command queue,
...
but there is also now a global command queue. Instead of command queues
being dispatched on demand from wherever the command happens to be
added, they are now all dispatched from the top level server
loop. Command queues may now also include callbacks as well as commands,
and items may be inserted after the current command as well as at the end.
This all makes command queues significantly more predictable and easier
to use, and avoids the complex multiple nested command queues used by
source-file, if-shell and friends.
A mass rename of struct cmdq to a better name (cmdq_item probably) is
coming.
2016-10-16 17:55:14 +00:00
nicm
9b3ae84993
Drain notifys once at the end of the server loop instead of doing it
...
from the end of every command queue (which could be nested).
2016-10-15 00:01:01 +00:00
nicm
c426e485e5
Loads more static, except for cmd-*.c and window-*.c.
2016-10-10 21:29:23 +00:00
semarie
fc118e13a9
tmux: only consider ACCESSPERMS for setting mode on socket_path.
...
it explicitly removes any S_ISUID|S_ISGID|S_ISTXT bits, instead of letting
pledge(2) silenciously remove them.
ok nicm@ beck@ deraadt@
2016-07-07 09:24:09 +00:00
nicm
ec82fcdfea
Bump the listen() backlog up, some people have scripts that run up a lot
...
of clients quickly.
2016-03-30 13:20:07 +00:00
nicm
995af0e2b7
I no longer use my SourceForge address so replace it.
2016-01-19 15:59:12 +00:00
nicm
021c64310d
Add infrastructure to work out the best target given a pane or window
...
alone and use it to add pane_died and pane_exited hooks.
2015-12-16 21:50:37 +00:00
nicm
12da13c9d1
Make the marked pane a cmd_find_state.
2015-12-15 00:00:01 +00:00
nicm
dca93c56e0
Do lock failures slightly better, return a special value so we don't
...
unlink the wrong thing.
2015-11-24 23:01:51 +00:00
nicm
1e2df2d464
Remove the -I part of show-messages which isn't really that useful; the
...
server start time can now be accessed with a new start_time format (use:
tmux display -p '#{t:start_time}')
2015-11-24 21:52:06 +00:00
nicm
9cccb8c115
Make the log stuff a bit tidier with some helper functions.
2015-11-24 21:19:46 +00:00
nicm
01a2ddf3f8
Add getpw to pledge, makes tmux work in YP environments, discovered by
...
matthieu, ok deraadt
2015-11-22 19:41:19 +00:00
nicm
577c0e3e5a
Use __unused rather than rolling our own.
2015-11-18 14:27:44 +00:00
nicm
a582b62287
Accidentally turned off pledge, turn it back on.
2015-11-15 14:32:48 +00:00
nicm
c56b81a2ce
Push stdout and stderr to clients more aggressively, and add an event to
...
continue if the send fails.
2015-11-14 09:41:06 +00:00
nicm
d6daf37df4
Tidy utf8.c a little: build table on first use, and make utf8_width take
...
a u_int rather than splitting and then combining again in utf8_split.
2015-11-12 12:19:57 +00:00
nicm
abb4e9e2fa
The output log is only useful once and it means creating a file, so open
...
it once at startup instead of in every call to tty_open.
2015-10-31 13:12:03 +00:00
nicm
44657bf932
Move struct options into options.c.
2015-10-27 15:58:42 +00:00
nicm
07b0ea03c3
Break the common process set up, event loop and imsg dispatch code
...
between server and client out into a separate internal API. This will
make it easier to add another process.
2015-10-27 13:23:24 +00:00
nicm
5383b047d1
tmux can call pledge() in main with large set and then reduce it
...
slightly in the server to "stdio rpath wpath cpath fattr unix recvfd
proc exec tty ps".
2015-10-23 16:07:29 +00:00
nicm
515dfea4b7
This should not be changed.
2015-10-22 10:48:30 +00:00
nicm
31fd071faa
Rename shutdown to exit.
2015-10-22 10:46:24 +00:00
guenther
241fd72f75
Userspace doesn't need to use SUN_LEN(): connect() and bind() must accept
...
sizeof(struct sockaddr_un), so do the simple, portable thing
ok beck@ deraadt@
2015-10-11 00:26:23 +00:00
nicm
83157c02d6
Move initial conf load into cfg.c.
2015-09-01 10:01:56 +00:00
nicm
dd92b6e83d
Event base does not need to be global.
2015-08-30 22:19:07 +00:00
nicm
b9f0571780
We already loop over the windows in server_client_loop, so don't do it
...
again in server_loop just to check names.
2015-08-29 08:54:41 +00:00
nicm
b5aaefc727
Move alerts onto events rather than checking every loop.
2015-08-29 08:30:54 +00:00
