Commit Graph

144 Commits

Author SHA1 Message Date
Nicholas Marriott
fc9f08235b Can't call event_del() without event_set() first - so call event_set()
when setting up the client.
2010-08-23 17:36:32 +00:00
Nicholas Marriott
5f5104e782 MSG_EXIT can now have a return code in the message, so check for that
size as well. Stops the client fatal()ing on exit.
2010-08-22 16:09:49 +00:00
Nicholas Marriott
76bbdeb586 Send all three of stdin, stdout, stderr from the client to the server, so that
commands can directly make use of them. This means that load-buffer and
save-buffer can have "-" as the file to read from stdin or write to stdout.

This is a protocol version bump so the tmux server will need to be restarted
after upgrade (or an older client used).
2010-06-28 22:10:42 +00:00
Nicholas Marriott
510ec3fb9e Fix problems with window sizing seen by Raghavendra D Prabhu when
starting tmux from .xinitrc.

One of the very few things the server relies on the client for now is to
pass through a message on SIGWINCH, but there is a condition where
potentially a SIGWINCH may be lost during the transition from unattached
(main.c) to attached (client.c). So trigger a size change immediately
after the client installs its SIGWINCH handler.

Also, when the terminal is resized, reset the scroll region and cursor
position. Previously, we were clearing our saved idea of these, but in
fact some terminals do not reset them on resize, so this caused problems
during redraw.

While here make a resize to the same size not cause a redraw and rename
the tmux.out output log file to include the tmux PID.
2010-06-05 16:47:11 +00:00
Nicholas Marriott
36c0871c23 This ioctl(TIOCGWINSZ) call is no longer necessary, the result is never
used and the server now does it later on the tty fd directly.
2010-06-05 16:29:45 +00:00
Joel Sing
72d1afa169 Catch SIGHUP and terminate if running as a client. This prevents clients
from being left hanging around when, for example, a SSH session is
disconnected.

ok nicm@
2010-05-12 15:05:39 +00:00
Nicholas Marriott
c4a2fdf15b Put this back in with the initialisation in the right order. 2010-05-04 17:28:16 +00:00
Nicholas Marriott
af5e0bd15a Revert last change, it appears to be broken somehow. 2010-05-04 08:48:06 +00:00
Nicholas Marriott
ec1d37b1b2 Make signal handler setup/teardown two common functions instead of six,
and reset SIGCHLD after fork to fix problems with some shells. From
Romain Francois.
2010-05-03 16:06:32 +00:00
Nicholas Marriott
15a64b805e Massive spaces->tabs and trailing whitespace cleanup, hopefully for the last
time now I've configured emacs to make them displayed in really annoying
colours...
2009-12-03 22:50:09 +00:00
Nicholas Marriott
4ca857e0e9 Remove a couple of unused arguments where possible, and add /* ARGSUSED */ to
the rest to reduce lint output.
2009-11-26 21:37:13 +00:00
Nicholas Marriott
a18a374d51 imsg_read returns ssize_t not int, pointed out by lint via deraadt. 2009-11-13 18:07:52 +00:00
Nicholas Marriott
9f47c6083a Don't return 1 unless there was actually a problem (signal/lost server) rather
than for all events (normal exit/detach/etc).
2009-11-10 15:47:48 +00:00
Nicholas Marriott
862fe15c32 Move some common code into a function. 2009-11-04 22:57:49 +00:00
Nicholas Marriott
abf3a5d50e Initial changes to move tmux to libevent.
This moves the client-side loops are pretty much fully over to event-based only
(tmux.c and client.c) but server-side (server.c and friends) treats libevent as
a sort of clever poll, waking up after every event to run various things.

Moving the server stuff over to bufferevents and timers and so on will come
later.
2009-11-04 20:50:11 +00:00
Nicholas Marriott
2a585dc4ed Leftover unused variable :-/. 2009-11-02 13:42:25 +00:00
Nicholas Marriott
42fd44f1db There isn't much point in doing lstat before connect so instead just do connect
and handle ENOENT from it which is a little tidier.
2009-11-02 13:41:25 +00:00
Nicholas Marriott
a8b1379ccb Clear signal flags /before/ taking action and continue afterwards to reduce
chance of dropping signals. Pointed out by deraadt@.
2009-10-26 21:38:18 +00:00
Nicholas Marriott
284b94662a Tidy identify message send into a separate function. 2009-10-21 21:11:55 +00:00
Nicholas Marriott
90ad041fa5 Client tidying: get rid of client_ctx struct in favour of two variables in
client.c, and move the functions in client-fn.c into other files.
2009-10-21 20:11:47 +00:00
Nicholas Marriott
0907ca1931 Do this in a better way - print messages when exiting with nonzero.
Also remove the login shell information from server-info, only the client
should care about it.
2009-10-13 13:15:26 +00:00
Nicholas Marriott
760e39e405 Don't print exit messages when used as a login shell, requested by martynas@ a
while back.
2009-10-13 13:11:06 +00:00
Nicholas Marriott
9200a0be7a Support -c like sh(1) to execute a command, useful when tmux is a login
shell. Suggested by halex@.

This includes another protocol version increase (the last for now) so again
restart the tmux server before upgrading.
2009-09-23 12:03:30 +00:00
Nicholas Marriott
b01dcd7971 Remove the internal tmux locking and instead detach each client and run the
command specified by a new option "lock-command" (by default "lock -np") in
each client.

This means each terminal has to be unlocked individually but simplifies the
code and allows the system password to be used to unlock.

Note that the set-password command is gone, so it will need to be removed from
configuration files, and the -U command line flag has been removed.

This is the third protocol version change so again it is best to stop the tmux
server before upgrading.
2009-09-23 06:18:47 +00:00
Nicholas Marriott
962fa20b36 Trim some code by moving the ioctl(TIOCGWINSZ) after SIGWINCH from the client
into the server.

This is another (the second of four) protocol version changes coming this
morning, so again the server should be killed before upgrading.
2009-09-23 06:12:58 +00:00
Nicholas Marriott
64caf59e84 Don't attempt to open() the tty path, rely on the client sending its stdin fd
with imsg and fatal if it doesn't, then set the FD_CLOEXEC flag in tty_init
instead of tty_open to prevent them leaking into child processes if any are
created between the two calls.

This bumps the protocol version, so the tmux server should be killed before
upgrading.
2009-09-23 06:05:02 +00:00
Nicholas Marriott
273f1b385c Regularise some fatal messages. 2009-09-20 14:58:12 +00:00
Nicholas Marriott
751a2fa915 Fix a race condition when asking a client to take over the terminal (switching
to a different poll loop):

If a MSG_READY was followed very quickly by a MSG_EXIT (for example if doing
"tmux new 'exit'"), both messages could be read as part of the same imsg_read
in the first client poll loop. The MSG_READY would then cause a switch to the
second client loop, which would immediately call poll(2) again, causing the
client to hang forever waiting for an exit message that it already had.

Change to call imsg_get to process any existing messages before polling.
2009-09-02 23:49:25 +00:00
Nicholas Marriott
459abafcea That was the wrong fix. MSG_ERROR should set the error and the client should
use the error and exit on MSG_EXIT (it was being handled in the default
case). Undo the last change, move the errstr check into the MSG_EXIT case, and
add a comment.
2009-09-02 20:15:49 +00:00
Nicholas Marriott
7a4bac82d7 Set exittype for error exit as well as the error string. 2009-09-02 20:00:10 +00:00
Nicholas Marriott
85e8b70625 imsg closes the fd after sending, so dup() STDIN_FILENO before passing it to
the parent, otherwise TIOCGWINSZ will fail when the window is resized (that
could actually be moved into the server but this is more future-proof and
avoids breaking the protocol).
2009-08-12 06:04:28 +00:00
Nicholas Marriott
4310282a4c Have the client pass its stdin fd to the server when identifying itself and
have the server use that rather than reopening the tty. If the fd isn't given,
use the old behaviour (so no need for a version change).

This allows tmux to be used as the shell, so also change so that when working
out the command to execute if default-command is empty (the default), tmux will
try not execute itself.
2009-08-11 21:28:11 +00:00
Nicholas Marriott
f0635717b3 Switch tmux to use imsg. This is the last major change to make the
client-server protocol more resilient and make the protocol versioning work
properly. In future, the only things requiring a protocol version bump will be
changes in the message structs, and (when both client and server have this
change) mixing different versions should nicely report an error message.

As a side effect this also makes the code tidier, fixes a problem with the way
errors reported during server startup were handled, and supports fd passing
(which will be used in future).

Looked over by eric@, thanks.

Please note that mixing a client with this change with an older server or vice
versa may cause tmux to crash or hang - tmux should be completely exited before
upgrading.
2009-08-11 17:18:35 +00:00
Nicholas Marriott
6491274f60 Infrastructure and commands to manage the environment for processes started
within tmux.

There is a global environment, copied from the external environment when the
server is started and each sesssion has an (initially empty) session
environment which overrides it.

New commands set-environment and show-environment manipulate or display the
environments.

A new session option, update-environment, is a space-separated list of
variables which are updated from the external environment into the session
environment every time a new session is created - the default is DISPLAY.
2009-08-08 21:52:43 +00:00
Nicholas Marriott
e985629440 Tidy function a little by using a temporary variable. 2009-08-08 21:18:23 +00:00
Nicholas Marriott
5f13bb0c3a There aren't many client message types or code to handle them so get rid of the
lookup table and use a switch, merge the tiny handler functions into it, and
move the whole lot to client.c.

Also change client_msg_dispatch to consume as many messages as possible and
move the call to it to the right place so it checks for signals afterwards.

Prompted by suggestions from eric@.
2009-07-30 16:32:12 +00:00
Nicholas Marriott
479d614884 Tell the server when the client gets SIGTERM so it can clean up the terminal
properly, rather than just exiting.
2009-07-30 16:16:19 +00:00
Nicholas Marriott
34a82e7629 Make all messages sent between the client and server fixed size.
This is the first of two changes to make the protocol more resilient and less
sensitive to other changes in the code, particularly with commands. The client
now packs argv into a buffer and sends it to the server for parsing, rather
than doing it itself and sending the parsed command data.

As a side-effect this also removes a lot of now-unused command marshalling
code.

Mixing a server without this change and a client with or vice versa will cause
tmux to hang or crash, please ensure that tmux is entirely killed before
upgrading.
2009-07-26 12:58:44 +00:00
Nicholas Marriott
4a04b498db None of the server message functions return anything but 0, so make them all
void.

Also remove a leftover variable in client.c.
2009-07-23 21:19:11 +00:00
Nicholas Marriott
16e017d5a6 Tidy client message return slightly: convert flags into an enum, and merge
error string into struct client_ctx as well.
2009-07-23 20:24:27 +00:00
Nicholas Marriott
bb14c36a27 Pass a set of flags into client_init rather than just a start_server
variable. Only one flag now but more to come later.
2009-07-22 21:58:56 +00:00
Nicholas Marriott
eb8ab96980 Remove some dead assignments, found by sthen with clang. 2009-06-25 22:09:20 +00:00
Nicholas Marriott
1156467726 Call setproctitle earlier in the client, and include the socket name. Makes it
easier to match client to server in ps/pgrep when using several servers.
2009-06-05 07:15:58 +00:00
Nicholas Marriott
35876eaab9 Import tmux, a terminal multiplexor allowing (among other things) a single
terminal to be switched between several different windows and programs
displayed on one terminal be detached from one terminal and moved to another.

ok deraadt pirofti
2009-06-01 22:58:49 +00:00