and attributes and use them to restore the previous behaviour of
window-status-style being the default for window-status-format in the
status line. From John Drouhard in GitHub issue 1912.
was output in the pane faster than the timer would fire, so change how
it works to only defer the timer again if the pane was actually resized
within the last timer period. Reported by James Tai in GitHub issue
1880.
(needed for control clients to send mouse sequences). Also add some
format flags for UTF-8 and SGR mouse mode. Requested by Bradley Smith in
GitHub issues 1832 and 1833.
there should be no change to existing behaviour) and are set and shown
with set-option -p and show-options -p.
Change remain-on-exit and window-style/window-active-style to be pane
options (some others will be changed later).
This makes select-pane -P and -g unnecessary so no longer document them
(they still work) and no longer document set-window-option and
show-window-options in favour of set-option -w and show-options -w.
to start, otherwise commands like lsk which start the server again can
end up looping infinitely. Also make the first client exit
correctly. Problem reported by Wael M Nasreddine.
parser using yacc(1). This is a major change but is clearer and simpler
and allows some edge cases to be made more consistent, as well as
tidying up how aliases are handled. It will also allow some further
improvements later.
Entirely the same parser is now used for parsing the configuration file
and for string commands. This means that constructs previously only
available in .tmux.conf, such as %if, can now be used in string commands
(for example, those given to if-shell - not commands invoked from the
shell, they are still parsed by the shell itself).
The only syntax change I am aware of is that #{} outside quotes or a
comment is now considered a format and not a comment, so #{ is now a
syntax error (notably, if it is at the start of a line).
This also adds two new sections to the man page documenting the syntax
and outlining how parsing and command execution works.
Thanks to everyone who sent me test configs (they still all parse
without errors - but this doesn't mean they still work as intended!).
Thanks to Avi Halachmi for testing and man page improvements, also to
jmc@ for reviewing the man page changes.
immediately rather than queuing them (the command can block the queue
which means they were not being seen until it finished which was too
late). Reported by denis@ and solene@, ok solene@.
flag -e to new-window, split-window, respawn-window, respawn-pane to
pass environment variables into the newly created process. From Steffen
Christgau in GitHub issue 1697.
multiple commands to be easily bound to one hook. set-hook and
show-hooks remain but they are now variants of set-option and
show-options. show-options now has a -H flag to show hooks (by default
they are not shown).
changes to allow the status line to be entirely configured with a single
option.
Now that it is possible to configure their content, enable the existing
code that lets the status line be multiple lines in height. The status
option can now take a value of 2, 3, 4 or 5 (as well as the previous on
or off) to configure more than one line. The new status-format array
option configures the format of each line, the default just references
the existing status-* options, although some of the more obscure status
options may be eliminated in time.
Additions to the #[] syntax are: "align" to specify alignment (left,
centre, right), "list" for the window list and "range" to configure
ranges of text for the mouse bindings.
The "align" keyword can also be used to specify alignment of entries in
tree mode and the pane status lines.
and use tty_clear_line (which will choose the best escape sequence) to
clear any batches of cells with that flag when redrawing a line from the
stored screen.
and the previous restored when the top is exited. If a mode that is
already on the stack is entered, the existing instance is moved to the
top as the active mode rather than being opened new.
been a limitation for a long time.
There are two new options, window-size and default-size, and a new
command, resize-window. The force-width and force-height options and the
session_width and session_height formats have been removed.
The new window-size option tells tmux how to work out the size of
windows: largest means it picks the size of the largest session,
smallest the smallest session (similar to the old behaviour) and manual
means that it does not automatically resize windows. The default is
currently largest but this may change. aggressive-resize modifies the
choice of session for largest and smallest as it did before.
If a window is in a session attached to a client that is too small, only
part of the window is shown. tmux attempts to keep the cursor visible,
so the part of the window displayed is changed as the cursor moves (with
a small delay, to try and avoid excess redrawing when applications
redraw status lines or similar that are not currently visible). The
offset of the visible portion of the window is shown in status-right.
Drawing windows which are larger than the client is not as efficient as
those which fit, particularly when the cursor moves, so it is
recommended to avoid using this on slow machines or networks (set
window-size to smallest or manual).
The resize-window command can be used to resize a window manually. If it
is used, the window-size option is automatically set to manual for the
window (undo this with "setw -u window-size"). resize-window works in a
similar way to resize-pane (-U -D -L -R -x -y flags) but also has -a and
-A flags. -a sets the window to the size of the smallest client (what it
would be if window-size was smallest) and -A the largest.
For the same behaviour as force-width or force-height, use resize-window
-x or -y, and "setw -u window-size" to revert to automatic sizing..
If the global window-size option is set to manual, the default-size
option is used for new windows. If -x or -y is used with new-session,
that sets the default-size option for the new session.
The maximum size of a window is 10000x10000. But expect applications to
complain and much higher memory use if making a window excessively
big. The minimum size is the size required for the current layout
including borders.
The refresh-client command can be used to pan around a window, -U -D -L
-R moves up, down, left or right and -c returns to automatic cursor
tracking. The position is reset when the current window is changed.
is larger than the client manually. Bound to S-Up, S-Down, S-Left,
S-Right and Delete manually.
Also add aliases for keys DC = Delete, IC = Insert, and make
refresh-client -C accept XxY as well as X,Y to match default-size.
This adds two new options, window-size and default-size, and a new
command, resize-window.
The force-width and force-height options, and the session_width and
session_height formats have been removed.
The new window-size option tells tmux how to work out the size of
windows: largest means it picks the size of the largest session,
smallest the smallest session (similar to the old behaviour) and
manual means that it does not automatically resize
windows. aggressive-resize modifies the choice of session for largest
and smallest as it did before.
If a window is in a session attached to a client that is too small,
only part of the window is shown. tmux attempts to keep the cursor
visible, so the part of the window displayed is changed as the cursor
moves (with a small delay, to try and avoid excess redrawing when
applications redraw status lines or similar that are not currently
visible).
Drawing windows which are larger than the client is not as efficient
as those which fit, particularly when the cursor moves, so it is
recommended to avoid using this on slow machines or networks (set
window-size to smallest or manual).
The resize-window command can be used to resize a window manually. If
it is used, the window-size option is automatically set to manual for
the window (undo this with "setw -u window-size"). resize-window works
in a similar way to resize-pane (-U -D -L -R -x -y flags) but also has
-a and -A flags. -a sets the window to the size of the smallest client
(what it would be if window-size was smallest) and -A the largest.
For the same behaviour as force-width or force-height, use
resize-width -x or -y.
If the global window-size option is set to manual, the default-size
option is used for new windows. If -x or -y is used with new-session,
that sets the default-size option for the new session.
The maximum size of a window is 10000x10000. But expect applications
to complain and higher memory use if you make a window that big. The
minimum size is the size required for the current layout including
borders.
This change allows some code improvements, most notably that since
windows can now never be cropped, that code can be removed from the
layout code, and since panes can now never be outside the size of the
window, window_pane_visible can be removed.
intended as the target client where the message should be displayed but
at some point (perhaps when -p was added), it was used for format
expansion too. This means it can get a bit weird where you have client
formats expanding for a client with a different current session than the
target session.
However, it is nice that display-message can be used to show information
about a specific client. So change so that the -c client will be used if
the session matches the target session (-t or default), otherwise the
best client will be chosen.
automatically zoom the pane when the mode is entered and unzoom when it
exits, assuming the pane is not already zoomed. Add -Z to the default
key bindings.
performance cost with a large history. Instead change back to using a
second grid and copying modified lines over which is much faster (this
doesn't revert to the old code however which didn't support UTF-8
properly). GitHub issue 1249.
colour ("true" or "direct" colour). These consist of new entries (such
as "xterm-direct") which have a different setaf/setab implementation,
colors and pairs set to 0x1000000 and 0x10000, and a new RGB flag.
The setaf/setab definitions seem to be geared towards what ncurses (or
emacs maybe) needs, in that the new versions do only ANSI and RGB
colours (they can't be used for the 256 colour palette); they rely on
the silly ISO colon-separated version of SGR; and they use a weird
multiplication scheme so they still only need one argument. The higher
values of colors and pairs require a recent ncurses to parse.
tmux can use the RGB flag to detect RGB colour support (keeping the old
Tc extension for backwards compatibility for now). However, as we still
want to send 256 colour information unchanged when possible, the new
setaf/setab are awkward. So when RGB is present, reserve setaf/setab
only for ANSI colours and use the escape sequences directly for 256 and
RGB colours. (To my knowledge no recent terminal uses unusual escape
sequences for these in any case.)
background is default (8), introduce an explicit free function and use
it where a free alone is needed. Likewise, use memmove directly rather
than grid_move_lines where it makes sense. Based on a memory leak fix by
Dan Aloni in GitHub issue 1051.
- remove the bell-on-alert option;
- add activity-action and silence-action options with the same possible
values as the existing bell-action;
- add "both" value for the visual-bell, visual-activity and
visual-silence options to trigger both a bell and a message.
This means all three work the same way. Based on changes from Yvain Thonnart.
instead if there is a pipe-pane active, do not exit until all data is
read (including any libevent hasn't seen yet). Fixes problem reported by
Theo Buehler and still seems to solve the original issue.
redraw on SIGWINCH if the size returns to the original size between the
original SIGWINCH and when they get around to calling TIOCGWINSZ. So use
the existing resize timer to introduce a small delay between the two
resizes.
unchanged, because it may have changed and changed back in the time
between us getting the signal and calling ioctl(). Always redraw when we
see SIGWINCH.
until the end of the server loop, tmux may have gone through several
internal resizes in between. This can be a problem if the final size is
the same as the initial size (what the application things it currently
is), because the application may choose not to redraw, assuming the
screen state is unchanged, when in fact tmux has thrown away parts of
the screen, assuming the application will redraw them.
To avoid this, do an extra resize if the new size is the same size as
the initial size. This should force the application to redraw when tmux
needs it to, while retaining the benefits of deferring (so we now resize
at most two times instead of at most one - and only two very rarely).
Fixes a problem with break-pane and zoomed panes reported by Michal
Mazurek.
some modern features.
Now the common code is in mode-tree.c, which provides an API used by the
three modes now separated into window-{buffer,client,tree}.c. Buffer
mode shows buffers, client mode clients and tree mode a tree of
sessions, windows and panes.
Each mode has a common set of key bindings plus a few that are specific
to the mode. Other changes are:
- each mode has a preview pane: for buffers this is the buffer content
(very useful), for others it is a preview of the pane;
- items may be sorted in different ways ('O' key);
- multiple items may be tagged and an operation applied to all of them
(for example, to delete multiple buffers at once);
- in tree mode a command may be run on the selected item (session,
window, pane) or on tagged items (key ':');
- displayed items may be filtered in tree mode by using a format (this
is used to implement find-window) (key 'f');
- the custom format (-F) for the display is no longer available;
- shortcut keys change from 0-9, a-z, A-Z which was always a bit weird
with keys used for other uses to 0-9, M-a to M-z.
Now that the code is simpler, other improvements will come later.
Primary key bindings for each mode are documented under the commands in
the man page (choose-buffer, choose-client, choose-tree).
Parts written by Thomas Adam.
it is present and zero. This is useful for users with terminals or fonts
that do not correctly support UTF-8 line drawing characters. GitHub
issue 927, reported by Hiroaki Yamazoe and Akinori Hattori.
itself hit the "terminal can't keep up" check. To avoid this, record how
much data we send during redraw (we know we will be starting with 0) and
skip the check until it has been flushed. GitHub issue 912.
xterm-keys by default, generates \033[1;3A instead of
\033\033[OA. Unfortunately this confuses vi, which doesn't understand
xterm keys and now sees Escape+Up pressed within escape-time as Escape
followed by A.
The issue doesn't happen in xterm itself because it gets the keys from X
and can distinguish between a genuine M-Up and Escape+Up.
Because xterm can, tmux can too: xterm will give us \033[1;3A (that is,
kUP3) for a real M-Up and \033\033OA for Escape+Up - in fact, we can be
sure any \033 preceding an xterm key is a real Escape key press because
Meta would be part of the xterm key instead of a separate \033.
So change tmux to recognise both sequences as M-Up for its own purposes,
but generate the xterm version of M-Up only if it originally received
the xterm version from the terminal.
This means we will return to sending \033\033OA instead of the xterm key
for terminals that do not support xterm keys themselves, but there is no
practical way around this because they do not allow us to distinguish
between Escape+Up and M-Up. xterm style escape sequences are now the de
facto standard for these keys in any case.
Problem reported by jsing@ and subsequently by Cecile Tonglet in GitHub
issue 907.
and not have to wait for an update when they change pane, we allow
commands to run more than once a second if the expanded form
changes. Unfortunately this can mean them being run far too often
(pretty much continually) when multiple clients exist, because some
formats (including #D) will always differ between clients.
To avoid this, give each client its own tree of jobs which means that
the same command will be different instances for each client - similar
to how we have the tag to separate commands for different panes.
GitHub issue 889; test case reported by Paul Johnson.
CMD_FIND_* flags in the cmd_entry and call it for the command. Commands
with special requirements call it themselves and update the target for
hooks to use.
will suppress root key table bindings. So change to always check the
root table if no binding is found in the current table (whether it be
the prefix table from pressing the prefix or the copy mode table from a
pane).
A root key binding can be blocked by binding the key to a command that
does nothing (like send-keys with no arguments).
Problem reported by Thomas Sattler.
reasonable amount (currently width * height * 8 bytes), discard all
output to the terminal and start trying to redraw periodically
instead. Continue with this until the amount of data we are trying to
write falls to a low level again.
This helps to prevent tmux sitting on a huge buffer of data when there
are processes with fast output running inside tmux but the outside
terminal is slow.
A new client_discarded format holds the amount of data that has been
discarded due to this mechanism.
The three variables (when to start this, when to stop, and how often to
redraw) are basically "works for me" at the moment, this is going in to
see how it goes and if it causes problems for anyone else.
