or unzoom (restored to the normal layout) if it already zoomed, bound to C-b z
by default. The pane is unzoomed on pretty much any excuse whatsoever.
We considered making this a new layout but the requirements are quite different
from layouts so decided it is better as a special case. Each current layout
cell is saved, a temporary one-cell layout generated and all except the active
pane set to NULL.
Prompted by suggestions and scripts from several. Thanks to Aaron Jensen and
Thiago Padilha for testing an earlier version.
commands and allow a command to block execution of subsequent commands. This
allows run-shell and if-shell to be synchronous which has been much requested.
Each client has a default command queue and commands are consumed one at a time
from it. A command may suspend execution from the queue by returning
CMD_RETURN_WAIT and then resume it by calling cmd_continue() - for example
run-shell does this from the callback that is fired after the job is freed.
When the command queue becomes empty, command clients are automatically exited
(unless attaching). A callback is also fired - this is used for nested commands
in, for example, if-shell which can block execution of the client's cmdq until
a new cmdq becomes empty.
Also merge all the old error/info/print functions together and lose the old
curclient/cmdclient distinction - a cmdq is bound to one client (or none if in
the configuration file), this is a command client if c->session is NULL
otherwise an attached client.
- rename client and session to start_client and start_session in
window_choose_data struct. also add TREE_OTHER define and reorder the
struct
- rename window_choose_ctx to window_choose_data_run
- don't pass a cmd_ctx into window_choose_create (will let it use a
different client later). instead take type, session, client
- add window_choose_data_free and use it to dispose of wcd rather than
each cmd-*.c doing it individually
- change so ref counting is done by wcd_add and wcd_free rather than
callers. this means 1 ref for each item but what of it :-)
- also add a ref to tree_session - not sure if this is needed?
- all the callbacks except choose-client and find-window are the same so
remove them and add window_choose_default_callback
- reorder/rename some other bits and pieces for tidyness
Sync from OpenBSD.
* obsd-master:
Add halfpage commands to mode command string table (missed by accident), from Thomas Adam.
Clarify some points about config files, notably that they are only read at server start. From Thomas Adam.
Use a utility function for common code to show errors in config file, from Thomas Adam.
Sync from OpenBSD.
* obsd-master:
Allow session tree (C-b s) to expand and collapse sessions with left/right/space keys. From Thomas Adam.
Remove some out of date text from man page, from Thomas Adam.
Fix up window reference counting and don't crash if the rename timer
fires while the window is dead but still referenced. Fixes problem
reported by Michael Scholz.
Instead of numbering choose mode items 0-9a-z and then nothing, number
them all and if there are more than 10 use a prompt when 0-9 is
pressed. From Thomas Adam.
Make command exec functions return an enum rather than -1/0/1 values and
add a new value to mean "leave client running but don't attach" to fix
problems with using some commands in a command sequence. Most of the
work by Thomas Adam, problem reported by "jspenguin" on SF bug 3535531.
add a new value to mean "leave client running but don't attach" to fix
problems with using some commands in a command sequence. Most of the
work by Thomas Adam, problem reported by "jspenguin" on SF bug 3535531.
Provide common helper function for adding windows and sessions to choose
lists and expand %% in command before using it rather than at callback
time. From Thomas Adam.
Add a skeleton mode to tmux (called "control mode") that let's tmux
commands be sent and output received on stdout. This can be used to
integrate with other terminal emulators and should allow some other
things to be made simpler later. More to come so doesn't do much yet and
deliberately not documented.
commands be sent and output received on stdout. This can be used to
integrate with other terminal emulators and should allow some other
things to be made simpler later. More to come so doesn't do much yet and
deliberately not documented.
Instead of passing stdin/stdout/stderr file descriptors over imsg and
handling them in the server, handle them in the client and pass buffers
over imsg. This is much tidier for some upcoming changes and the
performance hit isn't critical.
The tty fd is still passed to the server as before.
This bumps the tmux protocol version so new clients and old servers are
incompatible.
handling them in the server, handle them in the client and pass buffers
over imsg. This is much tidier for some upcoming changes and the
performance hit isn't critical.
The tty fd is still passed to the server as before.
This bumps the tmux protocol version so new clients and old servers are
incompatible.
Add a flag to move-window to renumber the windows in a session (closing
any gaps) and add an option to do this automatically each time a window
is killed. From Thomas Adam.
Add a simple form of output rate limiting by counting the number of
certain C0 sequences (linefeeds, backspaces, carriage returns) and if it
exceeds a threshold (current default 50/millisecond), start to redraw
the pane every 100 milliseconds instead of making each change as it
comes. Two configuration options - c0-change-trigger and
c0-change-interval.
This makes tmux much more responsive under very fast output (for example
yes(1) or accidentally cat'ing a large file) but may not be perfect on
all terminals and connections - feedback very welcome, particularly
where this change has a negative rather than positive effect (making it
off by default is a possibility).
After much experimentation based originally on a request Robin Lee
Powell (which ended with a completely different solution), this idea
from discussion with Ailin Nemui.
certain C0 sequences (linefeeds, backspaces, carriage returns) and if it
exceeds a threshold (current default 50/millisecond), start to redraw
the pane every 100 milliseconds instead of making each change as it
comes. Two configuration options - c0-change-trigger and
c0-change-interval.
This makes tmux much more responsive under very fast output (for example
yes(1) or accidentally cat'ing a large file) but may not be perfect on
all terminals and connections - feedback very welcome, particularly
where this change has a negative rather than positive effect (making it
off by default is a possibility).
After much experimentation based originally on a request Robin Lee
Powell (which ended with a completely different solution), this idea
from discussion with Ailin Nemui.
On xterm 271 and later, put the terminal into SCL 5 and use DECCRA for
scrolling the region in panes (if the large region check isn't
hit). With help from Ailin Nemui.
Use a lock file and flock() to serialize server start, avoids problems
when running a bunch of tmux from cron at the same time. Based on a diff
from Tim Ruehsen.
Support "bracketed paste" mode. This adds a -p flag to paste-buffer - if
this is used and the application has requested bracketed pastes, then
tmux surrounds the pasted text by \033[200~ and \033[201~. Applications
like vim can (apparently) use this to avoid, for example, indenting the
text. From Ailin Nemui.
this is used and the application has requested bracketed pastes, then
tmux surrounds the pasted text by \033[200~ and \033[201~. Applications
like vim can (apparently) use this to avoid, for example, indenting the
text. From Ailin Nemui.
Add move-pane command (like join-pane but allows the same window). Also
-b flag to join-pane and move-pane to place the pane to the left or
above. From George Nachman.
Provide defined ways to set the various default-path possibilities: ~
for home directory, . for server start directory, - for session start
directory and empty for the pane's working directory (the default). All
can also be used as part of a relative path (eg -/foo). Also provide -c
flags to neww and splitw to override default-path setting.
Based on a diff from sthen. ok sthen
for home directory, . for server start directory, - for session start
directory and empty for the pane's working directory (the default). All
can also be used as part of a relative path (eg -/foo). Also provide -c
flags to neww and splitw to override default-path setting.
Based on a diff from sthen. ok sthen
Drop the ability to have a list of keys in the prefix in favour of two
separate options, prefix and prefix2. This simplifies the code and gets
rid the data options type which was only used for this one option.
Also add a -2 flag to send-prefix to send the secondary prefix key,
fixing a cause of minor irritation.
People who want three prefix keys are out of luck :-).
separate options, prefix and prefix2. This simplifies the code and gets
rid the data options type which was only used for this one option.
Also add a -2 flag to send-prefix to send the secondary prefix key,
fixing a cause of minor irritation.
People who want three prefix keys are out of luck :-).
default-path isn't empty, it is used. Otherwise:
1) If tmux neww is run from the command line, the working directory of the
client is used.
2) Otherwise use some platform specific code to retrieve the current working
directory of the process in the active pane.
3) If that fails, the directory where the session was created is used.
Idea and support code, Linux, Solaris, FreeBSD bits by Romain Francoise,
OpenBSD bits by me.
default-path isn't empty, it is used. Otherwise:
1) If tmux neww is run from the command line, the working directory of the
client is used.
2) Otherwise sysctl KERN_PROC_CWD is used to retrieve the current
working directory of the process in the active pane.
3) If that fails, the directory where the session was created is used.
Support code by Romain Francois, OpenBSD specific bits by me.
Note this requires a recent userland and kernel with KERN_PROC_CWD.
Add initial framework for more powerful formatting of command output and
use it for list-{panes,windows,sessions}. This allows more descriptive
replacements (such as #{session_name}) and conditionals.
Later this will be used for status_replace and list-keys and other
places.
use it for list-{panes,windows,sessions}. This allows more descriptive
replacements (such as #{session_name}) and conditionals.
Later this will be used for status_replace and list-keys and other
places.
Date: 2011/06/05 11:53:05
Author: nicm
Branch: HEAD
Tag: (none)
Log:
Get rid of the layout string code which tries to walk through the layout
hierarchy and instead just look at what panes are actually in the window.
Support xterm(1) cursor colour change sequences through terminfo(5) Cc
(set) and Cr (reset) extensions. Originally by Sean Estabrooks, tweaked
by me and Ailin Nemui.
Support setting the xterm clipboard when copying from copy mode using
the xterm escape sequence for the purpose (if xterm is configured to
allow it).
Written by and much discussed Ailin Nemui, guidance on
xterm/termcap/terminfo from Thomas Dickey.
Use the tsl and fsl terminfo(5) capabilities to update terminal title
and automatically fill them in on terminals with the XT capability
(which means their title setting is xterm-compatible). From hsim at
gmx.li.
the xterm escape sequence for the purpose (if xterm is configured to
allow it).
Written by and much discussed Ailin Nemui, guidance on
xterm/termcap/terminfo from Thomas Dickey.
When mode-mouse is on (it is off by default), automatically enter copy
mode when the mouse is dragged or the mouse wheel is used. Also exit
copy mode when the mouse wheel is scrolled off the bottom. Discussed
with and written by hsim at gmx dot li.
mode when the mouse is dragged or the mouse wheel is used. Also exit
copy mode when the mouse wheel is scrolled off the bottom. Discussed
with and written by hsim at gmx dot li.
|Date: 2011/04/18 20:49:05
|Author: nicm
|Branch: HEAD
|Tag: (none)
|Log:
|Add an option (mouse-select-window) which allows the mouse to be used by
|clicking on the status line, written by hsim at gmx dot li.
|Date: 2011/04/06 22:51:31
|Author: nicm
|Branch: HEAD
|Tag: (none)
|Log:
|Change so that an empty session name always means the current sessions
|even if given with, for example, -t '', and explicitly forbid empty
|session names and those containing a : when they are created.
|Date: 2011/04/05 20:37:01
|Author: nicm
|Branch: HEAD
|Tag: (none)
|Log:
|Add a flag to cmd_find_session so that attach-session can prefer
|unattached sessions when choosing the most recently used (if -t is not
|given). Suggested by claudio@.
|Date: 2011/03/29 20:30:16
|Author: nicm
|Branch: HEAD
|Tag: (none)
|Log:
|Change -t on display-message to be target-pane for the #[A-Z]
|replacements and add -c as target-client.
|Date: 2011/03/27 21:31:25
|Author: nicm
|Branch: HEAD
|Tag: (none)
|Log:
|Don't include meta twice when working out the flags to output for
|xterm-style keys - bit 3 is accepted on input but not on output. Also a
|style nit in the header.
Date: 2011/03/27 21:27:26
Author: nicm
Branch: HEAD
Tag: (none)
Log:
Give each pane created in a tmux server a unique id (starting from 0),
put it in the TMUX_PANE environment variable and accept it as a
target. Suggested by and with testing and tweaks from Ben Boeckel.
Support passing through escape sequences to the underlying terminal by
using DCS with a "tmux;" prefix. Escape characters in the sequences must
be doubled. For example:
$ printf '\033Ptmux;\033\033]12;red\007\033\\'
Will pass \033]12;red\007 to the terminal (and change the cursor colour
in xterm). From Kevin Goodsell.
using DCS with a "tmux;" prefix. Escape characters in the sequences must
be doubled. For example:
$ printf '\033Ptmux;\033\033]12;red\007\033\\'
Will pass \033]12;red\007 to the terminal (and change the cursor colour
in xterm). From Kevin Goodsell.
Simplify the way jobs work and drop the persist type, so all jobs are
fire-and-forget.
Status jobs now managed with two trees of output (new and old), rather
than storing the output in the jobs themselves. When the status line is
processed any jobs which don't appear in the new tree are started and
the output from the old tree displayed. When a job finishes it updates
the new tree with its output and that is used for any subsequent
redraws. When the status interval expires, the new tree is moved to the
old so that all jobs are run again.
This fixes the "#(echo %H:%M:%S)" problem which would lead to thousands
of identical persistent jobs and high memory use (this can still be
achieved by adding "sleep 30" but that is much less likely to happen by
accident).
fire-and-forget.
Status jobs now managed with two trees of output (new and old), rather
than storing the output in the jobs themselves. When the status line is
processed any jobs which don't appear in the new tree are started and
the output from the old tree displayed. When a job finishes it updates
the new tree with its output and that is used for any subsequent
redraws. When the status interval expires, the new tree is moved to the
old so that all jobs are run again.
This fixes the "#(echo %H:%M:%S)" problem which would lead to thousands
of identical persistent jobs and high memory use (this can still be
achieved by adding "sleep 30" but that is much less likely to happen by
accident).
Move all calls to fcntl(...O_NONBLOCK) into a function and clear the
flag on the stdio file descriptors before closing them (fixes things
like "tmux ls && cat").
Clean up and simplify tmux command argument parsing.
Originally, tmux commands were parsed in the client process into a
struct with the command data which was then serialised and sent to the
server to be executed. The parsing was later moved into the server (an
argv was sent from the client), but the parse step and intermediate
struct was kept.
This change removes that struct and the separate parse step. Argument
parsing and printing is now common to all commands (in arguments.c) with
each command left with just an optional check function (to validate the
arguments at parse time), the exec function and a function to set up any
key bindings (renamed from the old init function).
This is overall more simple and consistent.
There should be no changes to any commands behaviour or syntax although
as this touches every command please watch for any unexpected changes.
Support for UTF-8 mouse input (\033[1005h). This was added in xterm 262
and supports larger terminals than the older way.
If the new mouse-utf8 option is on, UTF-8 mouse input is enabled for all
UTF-8 terminals. The option defaults to on if LANG etc are set in the
same manner as the utf8 option.
With help and based on code from hsim at gmx.li.
Originally, tmux commands were parsed in the client process into a
struct with the command data which was then serialised and sent to the
server to be executed. The parsing was later moved into the server (an
argv was sent from the client), but the parse step and intermediate
struct was kept.
This change removes that struct and the separate parse step. Argument
parsing and printing is now common to all commands (in arguments.c) with
each command left with just an optional check function (to validate the
arguments at parse time), the exec function and a function to set up any
key bindings (renamed from the old init function).
This is overall more simple and consistent.
There should be no changes to any commands behaviour or syntax although
as this touches every command please watch for any unexpected changes.
Move the user-visible parts of all options (names, types, limit, default
values) together into one set of tables in options-table.c. Also clean
up and simplify cmd-set-options.c and move a common print function into
option-table.c.
and supports larger terminals than the older way.
If the new mouse-utf8 option is on, UTF-8 mouse input is enabled for all
UTF-8 terminals. The option defaults to on if LANG etc are set in the
same manner as the utf8 option.
With help and based on code from hsim at gmx.li.
Don't reset the activity timer for unattached sessions every second,
this screws up the choice of most-recently-used. Instead, break the time
update into a little function and do it when the session is attached.
Pointed out by joshe@.
values) together into one set of tables in options-table.c. Also clean
up and simplify cmd-set-options.c and move a common print function into
option-table.c.
this screws up the choice of most-recently-used. Instead, break the time
update into a little function and do it when the session is attached.
Pointed out by joshe@.
Store sessions in an RB tree by name rather than a list, this is tidier
and allows them to easily be shown sorted in various lists
(list-sessions/choose-sessions).
Keep a session index which is used in a couple of places internally but
make it an ever-increasing number rather than filling in gaps with new
sessions.
Unify the way sessions are used by callbacks - store the address and use
the reference count, then check it is still on the global sessions list
in the callback.
and allows them to easily be shown sorted in various lists
(list-sessions/choose-sessions).
Keep a session index which is used in a couple of places internally but
make it an ever-increasing number rather than filling in gaps with new
sessions.
Date: 2010/11/22 21:13:13
Author: nicm
Branch: HEAD
Tag: (none)
Log:
There is somewhere that WINDOW_HIDDEN is getting set when it shouldn't
be and I can't find it, but the flag itself is a useless optimisation
that only applies to automatic-resize windows, so just dispose of it
entirely.
Fixes problems reported by Nicholas Riley.
Members:
resize.c:1.5->1.6
tmux.h:1.246->1.247
tty.c:1.92->1.93
|PatchSet 781
|Date: 2010/10/29 21:11:57
|Author: nicm
|Branch: HEAD
|Tag: (none)
|Log:
|We now send argv to the server after parsing it in the client to get the
|command, so the client should not modify it. Instead, take a copy. Fixes
|parsing command lists, reported by mcbride@.
|
|Members:
| cmd-list.c:1.5->1.6
| cmd.c:1.45->1.46
| tmux.h:1.244->1.245
be and I can't find it, but the flag itself is a useless optimisation
that only applies to automatic-resize windows, so just dispose of it
entirely.
Fixes problems reported by Nicholas Riley.
Two new options:
- server option "exit-unattached" makes the server exit when no clients
are attached, even if sessions are present;
- session option "destroy-unattached" destroys a session once no clients
are attached to it.
These are useful for preventing tmux remaining in the background where
it is undesirable and when using tmux as a login shell to keep a limit
on new sessions.
- server option "exit-unattached" makes the server exit when no clients
are attached, even if sessions are present;
- session option "destroy-unattached" destroys a session once no clients
are attached to it.
These are useful for preventing tmux remaining in the background where
it is undesirable and when using tmux as a login shell to keep a limit
on new sessions.
Use UTF-8 line drawing characters on UTF-8 terminals. Fixes some stupid
terminals (I'm looking at you, putty) which disable the vt100 ACS mode
switching sequences in UTF-8 mode.
Also on terminals without ACS at all, use ASCII equivalents where
obvious.
terminals (I'm looking at you, putty) which disable the vt100 ACS mode
switching sequences in UTF-8 mode.
Also on terminals without ACS at all, use ASCII equivalents where
obvious.
Add -n and -p flags to switch-client to move to the next and previous
session (yes, it doesn't match window/pane, but so what, nor does
switch-client).
Based on a diff long ago from "edsouza".
Do not call event_del() for signals after fork(), just use sigaction()
directly instead - calling libevent functions after fork() w/o
event_reinit() is a bad idea, even if in this case it was harmless.
Change the way backoff works. Instead of stopping reading from the pty
when the client tty backs up too much, just stop updating the tty and
only update the internal screen. Then when the tty recovers, force a
redraw.
This prevents a dodgy client from causing other clients to go into
backoff while still allowing tmux to be responsive (locally) when seeing
lots of output.
when the client tty backs up too much, just stop updating the tty and
only update the internal screen. Then when the tty recovers, force a
redraw.
This prevents a dodgy client from causing other clients to go into
backoff while still allowing tmux to be responsive (locally) when seeing
lots of output.
When changing so that the client passes its stdout and stderr as well as
stdin up to the server, I forgot one essential point - the tmux server
could now be both the producer and consumer. This happens when tmux is
run inside tmux, as well as when piping tmux commands together.
So, using stdio(3) was a bad idea - if sufficient data was written, this
could block in write(2). When that happened and the server was both
producer and consumer, it deadlocks.
Change to use libevent bufferevents for the client stdin, stdout and
stderr instead. This is trivial enough for output but requires a
callback mechanism to trigger when stdin is finished.
This relies on the underlying polling mechanism for libevent to work
with whatever devices to which the user could redirect stdin, stdout or
stderr, hence the change to use poll(2) over kqueue(2) for tmux.
stdin up to the server, I forgot one essential point - the tmux server
could now be both the producer and consumer. This happens when tmux is
run inside tmux, as well as when piping tmux commands together.
So, using stdio(3) was a bad idea - if sufficient data was written, this
could block in write(2). When that happened and the server was both
producer and consumer, it deadlocks.
Change to use libevent bufferevents for the client stdin, stdout and
stderr instead. This is trivial enough for output but requires a
callback mechanism to trigger when stdin is finished.
This relies on the underlying polling mechanism for libevent to work
with whatever devices to which the user could redirect stdin, stdout or
stderr, hence the change to use poll(2) over kqueue(2) for tmux.
Return the command client return code with MSG_EXIT now that MSG_ERROR and
MSG_PRINT are unused.
New clients should be compatible with old tmux servers but vice versa may print
an error.
Custom layouts. list-windows command displays the layout as a string (such as
"bb62,159x48,0,0{79x48,0,0,79x48,80,0}") and it can be applied to another
window (with the same number of panes or fewer) using select-layout.
Send all three of stdin, stdout, stderr from the client to the server, so that
commands can directly make use of them. This means that load-buffer and
save-buffer can have "-" as the file to read from stdin or write to stdout.
This is a protocol version bump so the tmux server will need to be restarted
after upgrade (or an older client used).
Store the current working directory in the session, change the default-path
option to default to empty and make that mean that the stored session CWD is
used.
Setting the cmdlist pointer in the bind-key to NULL to prevent it being freed
after the command is executing is bogus because it may still be needed if the
same command is going to be executed again (for example if you "bind-key a
bind-key b ..."). Making a copy is hard, so instead add a reference count to
the cmd_list.
While here, also print bind-key -n and the rest of the flags properly.
Fixes problem reported by mcbride@.
commands can directly make use of them. This means that load-buffer and
save-buffer can have "-" as the file to read from stdin or write to stdout.
This is a protocol version bump so the tmux server will need to be restarted
after upgrade (or an older client used).
after the command is executing is bogus because it may still be needed if the
same command is going to be executed again (for example if you "bind-key a
bind-key b ..."). Making a copy is hard, so instead add a reference count to
the cmd_list.
While here, also print bind-key -n and the rest of the flags properly.
Fixes problem reported by mcbride@.
Fix problems with window sizing seen by Raghavendra D Prabhu when
starting tmux from .xinitrc.
One of the very few things the server relies on the client for now is to
pass through a message on SIGWINCH, but there is a condition where
potentially a SIGWINCH may be lost during the transition from unattached
(main.c) to attached (client.c). So trigger a size change immediately
after the client installs its SIGWINCH handler.
Also, when the terminal is resized, reset the scroll region and cursor
position. Previously, we were clearing our saved idea of these, but in
fact some terminals do not reset them on resize, so this caused problems
during redraw.
While here make a resize to the same size not cause a redraw and rename
the tmux.out output log file to include the tmux PID.
When the mode-mouse option is on, support dragging to make a selection
in copy mode.
Also support the scroll wheel, although xterm strangely does not ignore
it in application mouse mode, causing redraw artifacts when scrolling up
(other terminals appear to be better behaved).
starting tmux from .xinitrc.
One of the very few things the server relies on the client for now is to
pass through a message on SIGWINCH, but there is a condition where
potentially a SIGWINCH may be lost during the transition from unattached
(main.c) to attached (client.c). So trigger a size change immediately
after the client installs its SIGWINCH handler.
Also, when the terminal is resized, reset the scroll region and cursor
position. Previously, we were clearing our saved idea of these, but in
fact some terminals do not reset them on resize, so this caused problems
during redraw.
While here make a resize to the same size not cause a redraw and rename
the tmux.out output log file to include the tmux PID.
in copy mode.
Also support the scroll wheel, although xterm strangely does not ignore
it in application mouse mode, causing redraw artifacts when scrolling up
(other terminals appear to be better behaved).
function. We were only ever using the client to find the session anyway.
This allows send-key to work properly for manipulating copy mode from
outside tmux.
From Micah Cowan.
Identical behaviour to select-prompt can now be obtained with
command-prompt, so remove select-prompt and change ' to be bound to
command-prompt -p index "select-window -t :%%".
Make signal handler setup/teardown two common functions instead of six,
and reset SIGCHLD after fork to fix problems with some shells. From
Romain Francoise.
Permit keys in copy mode to be prefixed by a repeat count, entered with
[1-9] in vi mode, or M-[1-9] in emacs mode.
From Micah Cowan, tweaked a little by me.
copy mode uses the real screen as backing and if it is updated while copying,
strange things can happen. So, freeze reading from the pty while in copy mode.
Instead of bailing out on the first configuration file error, carry on,
collecting all the errors, then start with the active window in more mode
displaying them.
vi-style B, W and E keys in copy mode to navigate between words treating only
spaces as word separators. Also add . to the list of word separators for
standard word navigation.
From Micah Cowan, tweaked slightly by me.
Add "server options" which are server-wide and not bound to a session or
window. Set and displayed with "set -s" and "show -s".
Currently the only option is "quiet" (like command-line -q, allowing it to be
set from .tmux.conf), but others will come along.
window. Set and displayed with "set -s" and "show -s".
Currently the only option is "quiet" (like command-line -q, allowing it to be
set from .tmux.conf), but others will come along.
Massive spaces->tabs and trailing whitespace cleanup, hopefully for the last
time now I've configured emacs to make them displayed in really annoying
colours...
Eliminate duplicate code and ease the passage for server-wide options by adding
a -w flag to set-option and show-options and making setw and showw aliases to
set -w and show -w.
Note: setw and showw are still there, but now aliases for set -w and show -w.
a -w flag to set-option and show-options and making setw and showw aliases to
set -w and show -w.
Note: setw and showw are still there, but now aliases for set -w and show -w.
Change status line drawing to create the window list in a separate screen and
then copy it into the status line screen. This allows UTF-8 in window names and
fixes some problems with #[] in window-status-format.
Two new options, window-status-format and window-status-current-format, which
allow the format of each window in the status line window list to be controlled
using similar # sequences as status-left/right.
This diff also moves part of the way towards UTF-8 support in window names but
it isn't quite there yet.
Cleanup by moving various (mostly horrible) little bits handling UTF-8 grid
data into functions in a new file, grid-utf8.c, and use sizeof intead of
UTF8_DATA.
Also nuke trailing whitespace from tmux.1, reminded by jmc.
Add a per-client log of status line messages displayed while that client
exists. A new message-limit session option sets the maximum number of entries
and a command, show-messages, shows the log (bound to ~ by default).
This (and prompt history) might be better as a single global log but until
there are global options it is easier for them to be per client.
allow the format of each window in the status line window list to be controlled
using similar # sequences as status-left/right.
This diff also moves part of the way towards UTF-8 support in window names but
it isn't quite there yet.
exists. A new message-limit session option sets the maximum number of entries
and a command, show-messages, shows the log (bound to ~ by default).
This (and prompt history) might be better as a single global log but until
there are global options it is easier for them to be per client.
Switch the tty key tree over to an (unbalanced) ternary tree which allows
partial matches to be done (they wait for further data or a timer to expire,
like a naked escape).
Mouse and xterm-style keys still expect to be atomic.
Switch tty key input over to happen on a read event. This is a bit more
complicated because of escape input, but in that case instead of processing a
key immediately, schedule a timer and reprocess the bufer when it expires.
This currently assumes that keys will be atomic (ie that if eg F1 is pressed
the entire sequence is present in the buffer). This is usually but not always
true, a change in the tree format so it can differentiate potential (partial)
key sequences will happens soon and will allow this to be fixed.
Convert the window pane (pty master side) fd over to use a bufferevent.
The evbuffer API is very similar to the existing tmux buffer API so this was
remarkably painless. Not many possible ways to do it, I suppose.
Initial changes to move tmux to libevent.
This moves the client-side loops are pretty much fully over to event-based only
(tmux.c and client.c) but server-side (server.c and friends) treats libevent as
a sort of clever poll, waking up after every event to run various things.
Moving the server stuff over to bufferevents and timers and so on will come
later.
partial matches to be done (they wait for further data or a timer to expire,
like a naked escape).
Mouse and xterm-style keys still expect to be atomic.
complicated because of escape input, but in that case instead of processing a
key immediately, schedule a timer and reprocess the bufer when it expires.
This currently assumes that keys will be atomic (ie that if eg F1 is pressed
the entire sequence is present in the buffer). This is usually but not always
true, a change in the tree format so it can differentiate potential (partial)
key sequences will happens soon and will allow this to be fixed.
Add an activity time for clients, like for sessions, and change session and
client lookup to pick the most recently used rather than the most recently
created - this is much more useful when used interactively and (because the
activity time is set at creation) should have no effect on source-file.
Based on a problem reported by Jan Johansson.
If it isn't available explicitly, work out the current client in a similar way
to the current session - build a list of the possibilities then pick the
newest.
Change session and client activity and creation time members to have more
meaningful names.
Also, remove the code to try and update the session activity time for the
command client when a command message is received as is pointless because it
des not have a session.
Double the escape timer (the time after a \033 is received before tmux gives up
waiting to see if it is part of a key sequence and passes it through) to 500
ms, the previous setting was too fast. Suggested by naddy.
This moves the client-side loops are pretty much fully over to event-based only
(tmux.c and client.c) but server-side (server.c and friends) treats libevent as
a sort of clever poll, waking up after every event to run various things.
Moving the server stuff over to bufferevents and timers and so on will come
later.
client lookup to pick the most recently used rather than the most recently
created - this is much more useful when used interactively and (because the
activity time is set at creation) should have no effect on source-file.
Based on a problem reported by Jan Johansson.
meaningful names.
Also, remove the code to try and update the session activity time for the
command client when a command message is received as is pointless because it
des not have a session.
Add a flag for jobs that shouldn't be freed after they've died and use it for
status jobs, then only kill those jobs when status-left, status-right or
set-titles-string is changed.
Fixes problems with changing options from inside #().
If any client currently displaying a window pane has more than 1 KB of output
buffered, don't accept any further data from the process running in the pane.
This makes tmux much more responsive when flooded with output, although other
buffers can still have an impact when running remotely.
Prompted by a query from Ranganathan Sankaralingam.
status jobs, then only kill those jobs when status-left, status-right or
set-titles-string is changed.
Fixes problems with changing options from inside #().
Rewrite xterm-keys code (both input and output) so that works (doesn't always
output the same modifiers, accepts all the possible input keys) and is more
understandable.
Support the (mostly new) function key+modifier caps (kIC-kIC7). Most of these
will be caught (soon) by the xterm keys code in xterm itself but some other
descriptions such as rxvt define them as well.
buffered, don't accept any further data from the process running in the pane.
This makes tmux much more responsive when flooded with output, although other
buffers can still have an impact when running remotely.
Prompted by a query from Ranganathan Sankaralingam.
Remove the -d flag to tmux and just use op/AX to detect default colours.
Irritatingly, although op can be used to tell if a terminal supports default
colours, it can't be used to set them because in some terminfo descriptions it
resets attributes as a side-effect (acts as sgr0) and in others it doesn't, so
it is not possible to determine reliably what the terminal state will be
afterwards. So if AX is missing and op is present, tmux just sends sgr0.
Anyone using -d for a terminal who finds they actually needed it can replace it
using terminal-overrides, but please let me know as it is probably an omission
from terminfo.
Irritatingly, although op can be used to tell if a terminal supports default
colours, it can't be used to set them because in some terminfo descriptions it
resets attributes as a side-effect (acts as sgr0) and in others it doesn't, so
it is not possible to determine reliably what the terminal state will be
afterwards. So if AX is missing and op is present, tmux just sends sgr0.
Anyone using -d for a terminal who finds they actually needed it can replace it
using terminal-overrides, but please let me know as it is probably an omission
from terminfo.
Split the server code handling clients, jobs and windows off into separate
files from server.c (merging server-msg.c into the client file) and rather than
iterating over each set after poll(), allow a callback to be specified when the
fd is added and just walk once over the returned pollfds calling each callback
where needed.
More to come, getting this in so it is tested.
Try to reduce the UTF-8 mess.
Get rid of passing around u_char[4]s and define a struct utf8_data which has
character data, size (sequence length) and width. Move UTF-8 character
collection into two functions utf8_open/utf8_append in utf8.c which fill in
this struct and use these functions from input.c and the various functions in
screen-write.c.
Space for rather more data than is necessary for one UTF-8 sequence is in the
utf8_data struct because screen_write_copy is still nasty and needs to reinject
the character (after combining) into screen_write_cell.
UTF-8 combined character fixes.
Thai can have treble combinations (1 x width=1 then 2 x width=0) so bump the
UTF-8 cell data size to 9 and alter the code to allow this.
Also break off the combining code into a separate function, handle any further
combining beyond the buffer size by replacing the character with _s, and when
redrawing the UTF-8 character don't assume the first part has just been
printed, redraw the entire line.
Instead of having a complicated check to see if the cursor is in the last
position to avoid an explicit wrap, actually move it there.
Some UTF-8 fixes to come.
files from server.c (merging server-msg.c into the client file) and rather than
iterating over each set after poll(), allow a callback to be specified when the
fd is added and just walk once over the returned pollfds calling each callback
where needed.
More to come, getting this in so it is tested.
Get rid of passing around u_char[4]s and define a struct utf8_data which has
character data, size (sequence length) and width. Move UTF-8 character
collection into two functions utf8_open/utf8_append in utf8.c which fill in
this struct and use these functions from input.c and the various functions in
screen-write.c.
Space for rather more data than is necessary for one UTF-8 sequence is in the
utf8_data struct because screen_write_copy is still nasty and needs to reinject
the character (after combining) into screen_write_cell.
Thai can have treble combinations (1 x width=1 then 2 x width=0) so bump the
UTF-8 cell data size to 9 and alter the code to allow this.
Also break off the combining code into a separate function, handle any further
combining beyond the buffer size by replacing the character with _s, and when
redrawing the UTF-8 character don't assume the first part has just been
printed, redraw the entire line.
Add mode keys to move the cursor to the top, middle and bottom of the screen.
H/M/L in vi mode and M-R/M-r in emacs (bottom of screen not bound in emacs).
When drawing lines that have wrapped naturally, don't force a newline but
permit them to wrap naturally again. This allows terminals that use this to
guess where lines start and end for eg mouse selecting (like xterm) to work
correctly.
This was another long-standing issue raised by several people over the last
while.
Thanks to martynas@ for much testing. This was not trivial to get right so
bringing it in for wider testing and adn to fix any further glitches in-tree.
When backspace is received at the beginning of a line and the previous line was
wrapped, move the cursor back up to the end of the previous line.
Another one of the forgotten persons requested this quite a while ago (I need
to start noting names on todo items...) when it was quite hard to
implement. Now it is easy and I don't see it can do any harm, so hey presto...
Use relative cursor movement instead of absolute when possible and when
supported by the terminal to reduce the size of the output data (generally
about 10-20%).
permit them to wrap naturally again. This allows terminals that use this to
guess where lines start and end for eg mouse selecting (like xterm) to work
correctly.
This was another long-standing issue raised by several people over the last
while.
Thanks to martynas@ for much testing. This was not trivial to get right so
bringing it in for wider testing and adn to fix any further glitches in-tree.
wrapped, move the cursor back up to the end of the previous line.
Another one of the forgotten persons requested this quite a while ago (I need
to start noting names on todo items...) when it was quite hard to
implement. Now it is easy and I don't see it can do any harm, so hey presto...
Add a pipe-pane command to allow a pane to be piped to a shell command, for
example:
pipe-pane 'cat >~/out'
No arguments stops outputing and closes the pipe; the -o flag toggles a pipe
and on and off (useful for key bindings).
Suggested by espie@.
Clean up by introducing a wrapper struct for mouse clicks rather than passing
three u_chars around.
As a side-effect this fixes incorrectly rejecting high cursor positions
(because it was comparing them as signed char), reported by Tom Doherty.
Rather than running status-left, status-right and window title #() with popen
immediately every redraw, queue them up and run them in the background,
starting each once every status-interval. The actual status line uses the
output from the last run.
This brings several advantages:
- tmux itself may be called from inside #() without causing the server to hang;
- likewise, sleep or similar doesn't cause the server to block;
- commands aren't run excessively often when redrawing;
- commands shared by status-left and status-right, or used multiple times, will
only be run once.
run-shell and if-shell still use system()/popen() but will be changed over to
use this too later.
New option, mouse-select-pane. If on, the mouse may be used to select the
current pane.
Suggested by sthen@ and also by someone else ages ago who I have forgotten.
Add "grouped sessions" which have independent name, options, current window and
so on but where the linked windows are synchronized (ie creating, killing
windows and so on are mirrored between the sessions). A grouped session may be
created by passing -t to new-session.
Had this around for a while, tested by a couple of people.
Support for individual session idle time locking. May be enabled by turning off
the lock-server option (it is on by default). When this is off, each session
locks when it has been idle for the lock-after-time setting. When on, the
entire server locks when ALL sessions have been idle for their individual
lock-after-time settings.
This replaces one global-only option (lock-after-time) with another
(lock-server), but the default behaviour is usually preferable so there don't
seem to be many alternatives.
Diff/idea largely from Thomas Adam, tweaked by me.
example:
pipe-pane 'cat >~/out'
No arguments stops outputing and closes the pipe; the -o flag toggles a pipe
and on and off (useful for key bindings).
Suggested by espie@.
three u_chars around.
As a side-effect this fixes incorrectly rejecting high cursor positions
(because it was comparing them as signed char), reported by Tom Doherty.
immediately every redraw, queue them up and run them in the background,
starting each once every status-interval. The actual status line uses the
output from the last run.
This brings several advantages:
- tmux itself may be called from inside #() without causing the server to hang;
- likewise, sleep or similar doesn't cause the server to block;
- commands aren't run excessively often when redrawing;
- commands shared by status-left and status-right, or used multiple times, will
only be run once.
run-shell and if-shell still use system()/popen() but will be changed over to
use this too later.
so on but where the linked windows are synchronized (ie creating, killing
windows and so on are mirrored between the sessions). A grouped session may be
created by passing -t to new-session.
Had this around for a while, tested by a couple of people.
the lock-server option (it is on by default). When this is off, each session
locks when it has been idle for the lock-after-time setting. When on, the
entire server locks when ALL sessions have been idle for their individual
lock-after-time settings.
This replaces one global-only option (lock-after-time) with another
(lock-server), but the default behaviour is usually preferable so there don't
seem to be many alternatives.
Diff/idea largely from Thomas Adam, tweaked by me.
Make C-Up and C-Down in copy mode scroll the screen up and down one line
without moving the cursor, like Up and Down in scroll mode (which will shortly
disappear).
If no target client is specified to commands which accept one, try to guess the
current client, in a similar manner to how sessions already work: if the
current session can be established and has only one client, use that; otherwise
use the most recently created client.
current client, in a similar manner to how sessions already work: if the
current session can be established and has only one client, use that; otherwise
use the most recently created client.
Support -c like sh(1) to execute a command, useful when tmux is a login
shell. Suggested by halex@.
This includes another protocol version increase (the last for now) so again
restart the tmux server before upgrading.
Remove the internal tmux locking and instead detach each client and run the
command specified by a new option "lock-command" (by default "lock -np") in
each client.
This means each terminal has to be unlocked individually but simplifies the
code and allows the system password to be used to unlock.
Note that the set-password command is gone, so it will need to be removed from
configuration files, and the -U command line flag has been removed.
This is the third protocol version change so again it is best to stop the tmux
server before upgrading.
Trim some code by moving the ioctl(TIOCGWINSZ) after SIGWINCH from the client
into the server.
This is another (the second of four) protocol version changes coming this
morning, so again the server should be killed before upgrading.
Don't attempt to open() the tty path, rely on the client sending its stdin fd
with imsg and fatal if it doesn't, then set the FD_CLOEXEC flag in tty_init
instead of tty_open to prevent them leaking into child processes if any are
created between the two calls.
This bumps the protocol version, so the tmux server should be killed before
upgrading.
command specified by a new option "lock-command" (by default "lock -np") in
each client.
This means each terminal has to be unlocked individually but simplifies the
code and allows the system password to be used to unlock.
Note that the set-password command is gone, so it will need to be removed from
configuration files, and the -U command line flag has been removed.
This is the third protocol version change so again it is best to stop the tmux
server before upgrading.
into the server.
This is another (the second of four) protocol version changes coming this
morning, so again the server should be killed before upgrading.
with imsg and fatal if it doesn't, then set the FD_CLOEXEC flag in tty_init
instead of tty_open to prevent them leaking into child processes if any are
created between the two calls.
This bumps the protocol version, so the tmux server should be killed before
upgrading.
Permit multiple prefix keys to be defined, separated by commas, for example:
set -g prefix ^a,^b
Any key in the list acts as the prefix. The send-prefix command always sends
the first key in the list.
==
Rather than constructing an entire termios struct from ttydefaults.h, just let
forkpty do it and then alter the bits that should be changed after fork. A
little neater and more portable.
==
This should fix problems caused by glibc's broken ttydefaults.h file.
use the error and exit on MSG_EXIT (it was being handled in the default
case). Undo the last change, move the errstr check into the MSG_EXIT case, and
add a comment.
use the error and exit on MSG_EXIT (it was being handled in the default
case). Undo the last change, move the errstr check into the MSG_EXIT case, and
add a comment.
When using tmux as a login shell, there is currently no way to specify a shell
to be used as a login shell inside tmux, so add a default-shell session option.
This sets the shell invoked as a login shell when the default-command option is
empty.
The default option value is whichever of $SHELL, getpwuid(getuid())'s pw_shell
or /bin/sh is valid first.
Based on a diff from martynas@, changed by me to be a session option rather
than a window option.
