Commit Graph

226 Commits

Author SHA1 Message Date
nicm
f9c396db41 Completion of command-alias members. 2019-02-09 18:18:36 +00:00
nicm
646995384d Support for windows larger than visible on the attached client. This has
been a limitation for a long time.

There are two new options, window-size and default-size, and a new
command, resize-window. The force-width and force-height options and the
session_width and session_height formats have been removed.

The new window-size option tells tmux how to work out the size of
windows: largest means it picks the size of the largest session,
smallest the smallest session (similar to the old behaviour) and manual
means that it does not automatically resize windows. The default is
currently largest but this may change. aggressive-resize modifies the
choice of session for largest and smallest as it did before.

If a window is in a session attached to a client that is too small, only
part of the window is shown. tmux attempts to keep the cursor visible,
so the part of the window displayed is changed as the cursor moves (with
a small delay, to try and avoid excess redrawing when applications
redraw status lines or similar that are not currently visible). The
offset of the visible portion of the window is shown in status-right.

Drawing windows which are larger than the client is not as efficient as
those which fit, particularly when the cursor moves, so it is
recommended to avoid using this on slow machines or networks (set
window-size to smallest or manual).

The resize-window command can be used to resize a window manually. If it
is used, the window-size option is automatically set to manual for the
window (undo this with "setw -u window-size"). resize-window works in a
similar way to resize-pane (-U -D -L -R -x -y flags) but also has -a and
-A flags. -a sets the window to the size of the smallest client (what it
would be if window-size was smallest) and -A the largest.

For the same behaviour as force-width or force-height, use resize-window
-x or -y, and "setw -u window-size" to revert to automatic sizing..

If the global window-size option is set to manual, the default-size
option is used for new windows. If -x or -y is used with new-session,
that sets the default-size option for the new session.

The maximum size of a window is 10000x10000. But expect applications to
complain and much higher memory use if making a window excessively
big. The minimum size is the size required for the current layout
including borders.

The refresh-client command can be used to pan around a window, -U -D -L
-R moves up, down, left or right and -c returns to automatic cursor
tracking. The position is reset when the current window is changed.
2018-10-18 08:38:01 +00:00
nicm
f57aa143c1 Keep any text killed in the command prompt with C-w and yank it with
C-y, only use the top buffer if no text has previously been killed. This
and previous change promped by discussion with kn@.
2018-08-29 09:50:32 +00:00
nicm
e53094bc5f Add C-Left and C-Right as aliases for M-b and M-f. 2018-08-29 08:56:51 +00:00
nicm
55db3623bf Add StatusLeft and StatusRight mouse key modifiers for the left and
right parts of the status line.
2018-08-22 20:06:14 +00:00
nicm
98a478ceb3 Move offset of window list into status struct. 2018-08-20 20:41:58 +00:00
nicm
88327c7698 Add a client redraw-window flag instead of the redraw-all flag and for
all just use the three flags together (window, borders, status).
2018-08-19 16:45:03 +00:00
nicm
3f3f13fbd7 Remove an unused variable. 2018-02-22 11:42:41 +00:00
nicm
7f4513ec34 Add struct status_line to hold status line members of struct client, not
used yet but will be soon. From Thomas Adam.
2018-02-05 08:21:54 +00:00
nicm
fe26f977e6 Add C-g at command prompt for emacs people, GitHub issue 1213. 2018-01-01 11:03:54 +00:00
nicm
937f8ed095 Draw command prompt correctly with status line off. 2017-12-27 13:55:42 +00:00
nicm
58f6456af7 Remove unused variable from Thomas Adam. 2017-12-18 12:39:34 +00:00
nicm
8d37f699ad Add a "fast" version of screen_write_copy for tree mode that doesn't do
all the checks and selection and marking stuff needed for copy mode.
2017-11-02 21:29:17 +00:00
nicm
d3e8709ab5 Clear status line with spaces again so reverse works, spotted by sthen. 2017-10-20 13:10:54 +00:00
nicm
2f6935a630 Infrastructure for drawing status lines of more than one line in height,
still only one is allowed but this lets tmux draw bigger ones.
2017-10-16 19:30:53 +00:00
nicm
64552ae304 Add a flag to stop the prompt input being expanded. 2017-05-29 20:42:53 +00:00
nicm
91d202da7e Tidy command prompt callbacks and pass in the client. 2017-05-17 15:20:23 +00:00
nicm
ca6a121e63 Add a format for the last search string in copy mode and fix the prompt
so it can work when in -I, suggested by Suraj N Kurapati.
2017-05-03 05:53:34 +00:00
nicm
0ccfb61bb0 In order that people can use formats like #D in #() in the status line
and not have to wait for an update when they change pane, we allow
commands to run more than once a second if the expanded form
changes. Unfortunately this can mean them being run far too often
(pretty much continually) when multiple clients exist, because some
formats (including #D) will always differ between clients.

To avoid this, give each client its own tree of jobs which means that
the same command will be different instances for each client - similar
to how we have the tag to separate commands for different panes.

GitHub issue 889; test case reported by Paul Johnson.
2017-05-01 12:20:55 +00:00
nicm
1e0eb914d9 Memory leak from David CARLIER. 2017-04-22 12:55:06 +00:00
nicm
b1fa3e25e4 Break the message storage function into its own function, useful for
debugging.
2017-02-09 12:09:33 +00:00
nicm
5e6a8177e5 Cache status line position to reduce option lookups during output. 2017-02-03 21:01:02 +00:00
nicm
7d23d019c0 Add a window or pane id "tag" to each format tree and use it to separate
jobs, this means that if the same job is used for different windows or
panes (for example in pane-border-format), it will be run separately for
each pane.
2017-02-03 11:57:27 +00:00
nicm
22a528905d Make options_get_string return const string. 2017-01-13 11:56:43 +00:00
nicm
461217d0f0 Incremental search in copy mode (on for emacs keys by default) - much
the same as normal searching but updates the cursor position and marked
search terms as you type. C-r and C-s in the prompt repeat the search,
once finished searching (with Enter), N and n work as before.
2017-01-06 11:57:03 +00:00
nicm
9a56671a75 Highlight all occurrences of search string after searching in copy mode. 2017-01-05 09:07:15 +00:00
nicm
5819d2a9d7 Do not clear the prompt when a message is shown, just leave it around and
return to it when the message is finished.
2016-12-07 23:03:04 +00:00
nicm
c484c5a2a1 Drop the edit mode key tables and just use fixed key bindings for the
command prompt.
2016-10-12 14:50:14 +00:00
nicm
68bebe1fb7 The repeat prompt in both emacs and vi (and the old one in tmux) doesn't
support line editing and instead executes a command as soon as a
non-number key is pressed. Add a -N flag to command-prompt for the same
in copy mode. Reported by Theo Buehler.
2016-10-12 13:03:27 +00:00
nicm
76d6d3641f Fundamental change to how copy mode key bindings work:
The vi-copy and emacs-copy mode key tables are gone, and instead copy
mode commands are bound in one of two normal key tables ("copy-mode" or
"copy-mode-vi"). Keys are bound to "send-keys -X copy-mode-command". So:

    bind -temacs-copy C-Up scroll-up
    bind -temacs-copy -R5 WheelUpPane scroll-up

Becomes:

    bind -Tcopy-mode C-Up send -X scroll-up
    bind -Tcopy-mode WheelUpPane send -N5 -X scroll-up

This allows the full command parser and command set to be used - for
example, we can use the normal command prompt for searching, jumping,
and so on instead of a custom one:

    bind -Tcopy-mode C-r command-prompt -p'search up' "send -X search-backward '%%'"

command-prompt also gets a -1 option to only require on key press, which
is needed for jumping.

The plan is to get rid of mode keys entirely, so more to come eventually.
2016-10-11 07:23:34 +00:00
nicm
8b804fb589 Support UTF-8 entry into the command prompt. 2016-10-11 07:11:40 +00:00
nicm
c426e485e5 Loads more static, except for cmd-*.c and window-*.c. 2016-10-10 21:29:23 +00:00
nicm
2e5584c2b4 Allow repeat count to be specified in mode key tables with bind-key -R,
and set the default repeat count to 5 for WheelUp and WheelDown in
copy-mode.
2016-09-12 15:40:58 +00:00
nicm
3c10df4f87 Allow #[] in window-status-separator. 2016-06-06 07:23:36 +00:00
nicm
995af0e2b7 I no longer use my SourceForge address so replace it. 2016-01-19 15:59:12 +00:00
nicm
311be04d61 Don't rely on a calculation wrapping when applying message-limit, and
break out of the loop early. From Nicolas Viennot.
2016-01-01 08:04:20 +00:00
nicm
88bc8f3528 Style nits and line wrapping of function declarations. 2015-12-11 16:37:21 +00:00
nicm
01831da5f5 Add cmdq as an argument to format_create and add a format for the
command name (will also be used for more later).
2015-12-11 12:27:36 +00:00
nicm
e0f26dcda3 Remove format_create_flags and just pass flags to format_create. 2015-12-08 08:34:18 +00:00
tim
4fcc02ee9d If display-time is set to 0, show status messages until a key is pressed;
OK nicm@
2015-11-22 18:28:01 +00:00
nicm
fce56c56ef Instead of separate tables for different types of options, give each
option a scope type (server, session, window) in one table.
2015-11-20 12:01:19 +00:00
nicm
577c0e3e5a Use __unused rather than rolling our own. 2015-11-18 14:27:44 +00:00
nicm
c5689a5a40 Long overdue change to the way we store cells in the grid: now, instead
of storing a full grid_cell with UTF-8 data and everything, store a new
type grid_cell_entry. This can either be the cell itself (for ASCII
cells), or an offset into an extended array (per line) for UTF-8
data.

This avoid a large (8 byte) overhead on non-UTF-8 cells (by far the
majority for most users) without the complexity of the shadow array we
had before. Grid memory without any UTF-8 is about half.

The disadvantage that cells can no longer be modified in place and need
to be copied out of the grid and back but it turned out to be lot less
complicated than I expected.
2015-11-13 08:09:28 +00:00
nicm
1b86f520ea Nuke the utf8 and status-utf8 options and make tmux only a UTF-8
terminal. We still support non-UTF-8 terminals outside tmux, but inside
it is always UTF-8 (as when the utf8 and status-utf8 options were on).
2015-11-12 11:09:11 +00:00
nicm
69e0b8326a Support UTF-8 key bindings by expanding the key type from int to
uint64_t and converting UTF-8 to Unicode on input and the reverse on
output. (This allows key bindings, there are still omissions - the
largest being that the various prompts do not accept UTF-8.)
2015-11-12 11:05:34 +00:00
nicm
44657bf932 Move struct options into options.c. 2015-10-27 15:58:42 +00:00
nicm
076034345a Use client pointer not file descriptor in logging. 2015-10-20 21:12:08 +00:00
nicm
16efa84838 Make refresh-client force update of jobs, from Sina Siadat. 2015-09-14 10:25:52 +00:00
nicm
b569585000 Move struct paste_buffer out of tmux.h. 2015-08-29 09:25:00 +00:00
nicm
75d10058a4 Run status update on a per-client timer at status-interval. 2015-08-28 12:16:28 +00:00
nicm
5ec3621101 status_out and associated data structures are no longer used. 2015-07-29 11:56:02 +00:00
nicm
b254115acd Tidy up the way terminals are described and move some structs out of tmux.h. 2015-07-28 15:18:10 +00:00
nicm
92af3766ec Add an option (history-file) for a file to save/restore command prompt
history, from Olof-Joachim Frahm.
2015-07-20 15:50:04 +00:00
nicm
379400cfa6 Move the jobs output cache into the formats code so that #() work more
generally (for example, again working in set-titles-string).
2015-05-27 13:28:04 +00:00
nicm
0b39e6427f Remove ARRAY_* from history and expand completion to complete a) layout
names and b) targets beginning with -t or -s.
2015-05-06 23:56:46 +00:00
nicm
07dfdb974d Make message log a TAILQ. 2015-04-25 18:33:59 +00:00
nicm
583b4ab72b Set working directory for run-shell and if-shell. 2015-04-24 22:19:36 +00:00
nicm
bf635e7741 Rewrite of tmux mouse support which was a mess. Instead of having
options for "mouse-this" and "mouse-that", mouse events may be bound as
keys and there is one option "mouse" that turns on mouse support
entirely (set -g mouse on).

See the new MOUSE SUPPORT section of the man page for description of the
key names and new flags (-t= to specify the pane or window under mouse
as a target, and send-keys -M to pass through a mouse event).

The default builtin bindings for the mouse are:

    bind -n   MouseDown1Pane select-pane -t=; send-keys -M
    bind -n MouseDown1Status select-window -t=
    bind -n   MouseDrag1Pane copy-mode -M
    bind -n MouseDrag1Border resize-pane -M

To get the effect of turning mode-mouse off, do:

    unbind -n MouseDrag1Pane
    unbind -temacs-copy MouseDrag1Pane

The old mouse options are now gone, set-option -q may be used to
suppress warnings if mixing configuration files.
2015-04-19 21:34:21 +00:00
nicm
52756fb3c5 Use the same time for both calls to format_expand_time. 2015-02-06 23:28:52 +00:00
nicm
313f2263f8 status_replace can now become local to status.c and it no longer needs
the jobsflag argument. While here there is no need to repeat work that
format_defaults already does.
2015-02-06 17:21:08 +00:00
nicm
03758a50dc Add format_expand_time and use it instead of status_replace where
command execution is not needed.
2015-02-06 17:11:39 +00:00
nicm
4946f74253 Wrap all the individual format_* calls in a single format_defaults
functions.
2015-02-05 10:29:43 +00:00
nicm
c9642ee213 Remove two unused arguments from status_replace. 2015-02-01 23:43:23 +00:00
sthen
f9c7f9a17a typo in comment ;) ok nicm 2015-01-20 10:57:10 +00:00
nicm
d24c9d7d3e Do not put a space between status-left/status-right and the window list,
instead move the space into the defaults for the options (so status-left
now defaults to "[#S] ". From Balazs Kezes.
2014-11-05 23:15:11 +00:00
nicm
0a1a88d63c Better format for printf format attributes. 2014-10-20 23:57:13 +00:00
nicm
a27ba6e380 Add xreallocarray and remove nmemb argument from xrealloc. 2014-10-08 17:35:58 +00:00
nicm
d306bbe11e Take account of window-status-separator when checking window position,
based on diff from Balazs Kezes.
2014-10-02 10:39:43 +00:00
nicm
bec6c807cd There is no longer a need for a paste_stack struct or for global_buffers
to be global. Move to paste.c.
2014-04-24 09:14:43 +00:00
nicm
992ef70fb6 Remove the monitor-content option and associated bits and bobs. It's
never worked very well. If there is a big demand for it to return, will
consider better ways to do it.
2014-04-17 07:36:45 +00:00
nicm
8880bdb67c Do not replace ## with # in status_replace1 because it'll be done later
by the format code.
2014-04-02 17:08:23 +00:00
nicm
dca7d1c0fd Make message-limit a server option. 2014-03-31 21:41:35 +00:00
nicm
f835be4bb2 Style nit - no space between function name and bracket. 2014-02-14 13:59:01 +00:00
nicm
d0accdba88 Check for NULL session and whatnot in status_replace, from Thomas Adam. 2014-02-14 12:37:54 +00:00
nicm
945339b443 Allow replacing each of the many sets of separate foo-{fg,bg,attr}
options with a single foo-style option. For example:

    set -g status-fg yellow
    set -g status-bg red
    set -g status-attr blink

Becomes:

    set -g status-style fg=yellow,bg=red,blink

The -a flag to set can be used to add to rather than replace a style. So:

    set -g status-bg red

Becomes:

    set -ag status-style bg=red

Currently this is fully backwards compatible (all *-{fg,bg,attr} options
remain) but the plan is to deprecate them over time.

From Tiago Cunha.
2014-01-28 23:07:09 +00:00
Nicholas Marriott
7af5fec038 Whitespace nits, from Ben Boeckel. 2013-07-05 14:44:06 +00:00
Nicholas Marriott
c231381aa3 Demote the old single-character replacement variables (#S and friends)
to aliases of formats. From Tiago Cunha.
2013-05-31 19:56:05 +00:00
Nicholas Marriott
d28a39d01d Extend jobs to support writing and use that for copy-pipe instead of
popen, from Chris Johnsen.
2013-03-25 11:43:01 +00:00
Nicholas Marriott
c519f9a84c evbuffer_readline returns allocated storage, don't leak it. 2013-03-22 15:55:22 +00:00
Nicholas Marriott
8d59b189cc No more lint means no more ARGSUSED. 2013-03-22 10:31:22 +00:00
Nicholas Marriott
dd46c95e23 Aargh. Spaces -> tabs. 2013-03-21 16:25:08 +00:00
Nicholas Marriott
93224260ae Add window-status-last-* options, from Boris Faure. 2012-11-27 13:52:23 +00:00
Nicholas Marriott
df912e3540 xfree is not particularly helpful, remove it. From Thomas Adam. 2012-07-10 11:53:01 +00:00
Nicholas Marriott
a3391692ad Move a NULL check inside a function, from Tiago Cunha. 2012-07-09 09:55:57 +00:00
Nicholas Marriott
e60f48ab09 Use int not u_char for colours from options since they may have bit 8
set to mark them as 256-colour. Reported by Chris Johnson.
2012-04-29 07:33:41 +00:00
Nicholas Marriott
e02d1bce98 Add window-status-separator option, from Thomas Adam. 2012-04-23 22:23:14 +00:00
Nicholas Marriott
d3c842d367 Check event_initialized before event_del if event may not have been set
up; libevent2 complains about this. Reported by Moriyoshi Koizumi.
2012-03-17 18:24:07 +00:00
Nicholas Marriott
30f4c30ca3 Add A and I keys for vi status line editing. 2012-03-04 07:38:11 +00:00
Nicholas Marriott
4b8bb7770f The wlmouse offset should be part of the client, not the server. From
Ailin Nemui.
2012-03-03 08:55:56 +00:00
Nicholas Marriott
230d0fbc9e Add an option to move the status line to the top of the screen,
requested by many.
2012-01-29 09:37:02 +00:00
Nicholas Marriott
a7a44bfcd9 Terminate strftime buffer properly even if a really long format string
is given, from Tiago Cunha.
2012-01-26 09:05:54 +00:00
Nicholas Marriott
d2d2df1365 Fix memory leak in error path, from Tiago Cunha. 2012-01-26 09:03:09 +00:00
Nicholas Marriott
8cf19ab770 Add some trivial additional status line attributes from jwcxz at users
dot sourceforge dot net.
2012-01-20 19:51:28 +00:00
Nicholas Marriott
e6519d3e27 Add space movement keys for vi mode in the status line from Ben Boeckel. 2012-01-20 19:10:29 +00:00
Nicholas Marriott
2397083f7e Make M-f and M-b work the same at the command prompt as in copy mode,
pointed out by Romain Francoise.
2011-12-01 20:42:31 +00:00
Nicholas Marriott
fc5f8804ec Add word movement and editing command for command prompt editing, from
Ben Boeckel.
2011-11-15 23:34:12 +00:00
Nicholas Marriott
57df442916 Make window_pane_index work the same as window_index, from Ben Boeckel. 2011-11-15 23:19:51 +00:00
Nicholas Marriott
e5bf63cb59 Option to change status line (message) background when using vi keys and
in command mode. From Ben Boeckel.
2011-11-05 09:06:31 +00:00
Nicholas Marriott
3657aa675e Fix a couple of memory leaks, from marcel partap. 2011-08-20 20:37:30 +00:00
Nicholas Marriott
2de9b1e005 Make confirm-before prompt customizable with -p option like
command-prompt. Also move responsibility for calling status_replace into
status_prompt_{set,update} and add #W and #P to the default kill-window
and kill-pane prompts. By Tiago Cunha.
2011-07-08 06:37:57 +00:00