.\" $OpenBSD$ .\" .\" Copyright (c) 2007 Nicholas Marriott .\" .\" Permission to use, copy, modify, and distribute this software for any .\" purpose with or without fee is hereby granted, provided that the above .\" copyright notice and this permission notice appear in all copies. .\" .\" THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES .\" WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF .\" MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR .\" ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES .\" WHATSOEVER RESULTING FROM LOSS OF MIND, USE, DATA OR PROFITS, WHETHER .\" IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING .\" OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. .\" .Dd $Mdocdate$ .Dt TMUX 1 .Os .Sh NAME .Nm tmux .Nd terminal multiplexer .Sh SYNOPSIS .Nm tmux .Bk -words .Op Fl 2CDluvV .Op Fl c Ar shell-command .Op Fl f Ar file .Op Fl L Ar socket-name .Op Fl S Ar socket-path .Op Fl T Ar features .Op Ar command Op Ar flags .Ek .Sh DESCRIPTION .Nm is a terminal multiplexer: it enables a number of terminals to be created, accessed, and controlled from a single screen. .Nm may be detached from a screen and continue running in the background, then later reattached. .Pp When .Nm is started it creates a new .Em session with a single .Em window and displays it on screen. A status line at the bottom of the screen shows information on the current session and is used to enter interactive commands. .Pp A session is a single collection of .Em pseudo terminals under the management of .Nm . Each session has one or more windows linked to it. A window occupies the entire screen and may be split into rectangular panes, each of which is a separate pseudo terminal (the .Xr pty 4 manual page documents the technical details of pseudo terminals). Any number of .Nm instances may connect to the same session, and any number of windows may be present in the same session. Once all sessions are killed, .Nm exits. .Pp Each session is persistent and will survive accidental disconnection (such as .Xr ssh 1 connection timeout) or intentional detaching (with the .Ql C-b d key strokes). .Nm may be reattached using: .Pp .Dl $ tmux attach .Pp In .Nm , a session is displayed on screen by a .Em client and all sessions are managed by a single .Em server . The server and each client are separate processes which communicate through a socket in .Pa /tmp . .Pp The options are as follows: .Bl -tag -width "XXXXXXXXXXXX" .It Fl 2 Force .Nm to assume the terminal supports 256 colours. This is equivalent to .Fl T Ar 256 . .It Fl C Start in control mode (see the .Sx CONTROL MODE section). Given twice .Xo ( Fl CC ) Xc disables echo. .It Fl c Ar shell-command Execute .Ar shell-command using the default shell. If necessary, the .Nm server will be started to retrieve the .Ic default-shell option. This option is for compatibility with .Xr sh 1 when .Nm is used as a login shell. .It Fl D Do not start the .Nm server as a daemon. This also turns the .Ic exit-empty option off. With .Fl D , .Ar command may not be specified. .It Fl f Ar file Specify an alternative configuration file. By default, .Nm loads the system configuration file from .Pa /etc/tmux.conf , if present, then looks for a user configuration file at .Pa ~/.tmux.conf . .Pp The configuration file is a set of .Nm commands which are executed in sequence when the server is first started. .Nm loads configuration files once when the server process has started. The .Ic source-file command may be used to load a file later. .Pp .Nm shows any error messages from commands in configuration files in the first session created, and continues to process the rest of the configuration file. .It Fl L Ar socket-name .Nm stores the server socket in a directory under .Ev TMUX_TMPDIR or .Pa /tmp if it is unset. The default socket is named .Em default . This option allows a different socket name to be specified, allowing several independent .Nm servers to be run. Unlike .Fl S a full path is not necessary: the sockets are all created in a directory .Pa tmux-UID under the directory given by .Ev TMUX_TMPDIR or in .Pa /tmp . The .Pa tmux-UID directory is created by .Nm and must not be world readable, writable or executable. .Pp If the socket is accidentally removed, the .Dv SIGUSR1 signal may be sent to the .Nm server process to recreate it (note that this will fail if any parent directories are missing). .It Fl l Behave as a login shell. This flag currently has no effect and is for compatibility with other shells when using tmux as a login shell. .It Fl N Do not start the server even if the command would normally do so (for example .Ic new-session or .Ic start-server ) . .It Fl S Ar socket-path Specify a full alternative path to the server socket. If .Fl S is specified, the default socket directory is not used and any .Fl L flag is ignored. .It Fl u Write UTF-8 output to the terminal even if the first environment variable of .Ev LC_ALL , .Ev LC_CTYPE , or .Ev LANG that is set does not contain .Qq UTF-8 or .Qq UTF8 . This is equivalent to .Fl T Ar UTF-8 . .It Fl T Ar features Set terminal features for the client. This is a comma-separated list of features. See the .Ic terminal-features option. .It Fl v Request verbose logging. Log messages will be saved into .Pa tmux-client-PID.log and .Pa tmux-server-PID.log files in the current directory, where .Em PID is the PID of the server or client process. If .Fl v is specified twice, an additional .Pa tmux-out-PID.log file is generated with a copy of everything .Nm writes to the terminal. .Pp The .Dv SIGUSR2 signal may be sent to the .Nm server process to toggle logging between on (as if .Fl v was given) and off. .It Fl V Report the .Nm version. .It Ar command Op Ar flags This specifies one of a set of commands used to control .Nm , as described in the following sections. If no commands are specified, the .Ic new-session command is assumed. .El .Sh DEFAULT KEY BINDINGS .Nm may be controlled from an attached client by using a key combination of a prefix key, .Ql C-b (Ctrl-b) by default, followed by a command key. .Pp The default command key bindings are: .Pp .Bl -tag -width "XXXXXXXXXX" -offset indent -compact .It C-b Send the prefix key (C-b) through to the application. .It C-o Rotate the panes in the current window forwards. .It C-z Suspend the .Nm client. .It ! Break the current pane out of the window. .It \&" .\" " Split the current pane into two, top and bottom. .It # List all paste buffers. .It $ Rename the current session. .It % Split the current pane into two, left and right. .It & Kill the current window. .It ' Prompt for a window index to select. .It \&( Switch the attached client to the previous session. .It \&) Switch the attached client to the next session. .It , Rename the current window. .It - Delete the most recently copied buffer of text. .It . Prompt for an index to move the current window. .It 0 to 9 Select windows 0 to 9. .It : Enter the .Nm command prompt. .It ; Move to the previously active pane. .It = Choose which buffer to paste interactively from a list. .It \&? List all key bindings. .It D Choose a client to detach. .It L Switch the attached client back to the last session. .It \&[ Enter copy mode to copy text or view the history. .It \&] Paste the most recently copied buffer of text. .It c Create a new window. .It d Detach the current client. .It f Prompt to search for text in open windows. .It i Display some information about the current window. .It l Move to the previously selected window. .It m Mark the current pane (see .Ic select-pane .Fl m ) . .It M Clear the marked pane. .It n Change to the next window. .It o Select the next pane in the current window. .It p Change to the previous window. .It q Briefly display pane indexes. .It r Force redraw of the attached client. .It s Select a new session for the attached client interactively. .It t Show the time. .It w Choose the current window interactively. .It x Kill the current pane. .It z Toggle zoom state of the current pane. .It { Swap the current pane with the previous pane. .It } Swap the current pane with the next pane. .It ~ Show previous messages from .Nm , if any. .It Page Up Enter copy mode and scroll one page up. .It Up, Down .It Left, Right Change to the pane above, below, to the left, or to the right of the current pane. .It M-1 to M-5 Arrange panes in one of the five preset layouts: even-horizontal, even-vertical, main-horizontal, main-vertical, or tiled. .It Space Arrange the current window in the next preset layout. .It M-n Move to the next window with a bell or activity marker. .It M-o Rotate the panes in the current window backwards. .It M-p Move to the previous window with a bell or activity marker. .It C-Up, C-Down .It C-Left, C-Right Resize the current pane in steps of one cell. .It M-Up, M-Down .It M-Left, M-Right Resize the current pane in steps of five cells. .El .Pp Key bindings may be changed with the .Ic bind-key and .Ic unbind-key commands. .Sh COMMAND PARSING AND EXECUTION .Nm supports a large number of commands which can be used to control its behaviour. Each command is named and can accept zero or more flags and arguments. They may be bound to a key with the .Ic bind-key command or run from the shell prompt, a shell script, a configuration file or the command prompt. For example, the same .Ic set-option command run from the shell prompt, from .Pa ~/.tmux.conf and bound to a key may look like: .Bd -literal -offset indent $ tmux set-option -g status-style bg=cyan set-option -g status-style bg=cyan bind-key C set-option -g status-style bg=cyan .Ed .Pp Here, the command name is .Ql set-option , .Ql Fl g is a flag and .Ql status-style and .Ql bg=cyan are arguments. .Pp .Nm distinguishes between command parsing and execution. In order to execute a command, .Nm needs it to be split up into its name and arguments. This is command parsing. If a command is run from the shell, the shell parses it; from inside .Nm or from a configuration file, .Nm does. Examples of when .Nm parses commands are: .Bl -dash -offset indent .It in a configuration file; .It typed at the command prompt (see .Ic command-prompt ) ; .It given to .Ic bind-key ; .It passed as arguments to .Ic if-shell or .Ic confirm-before . .El .Pp To execute commands, each client has a .Ql command queue . A global command queue not attached to any client is used on startup for configuration files like .Pa ~/.tmux.conf . Parsed commands added to the queue are executed in order. Some commands, like .Ic if-shell and .Ic confirm-before , parse their argument to create a new command which is inserted immediately after themselves. This means that arguments can be parsed twice or more - once when the parent command (such as .Ic if-shell ) is parsed and again when it parses and executes its command. Commands like .Ic if-shell , .Ic run-shell and .Ic display-panes stop execution of subsequent commands on the queue until something happens - .Ic if-shell and .Ic run-shell until a shell command finishes and .Ic display-panes until a key is pressed. For example, the following commands: .Bd -literal -offset indent new-session; new-window if-shell "true" "split-window" kill-session .Ed .Pp Will execute .Ic new-session , .Ic new-window , .Ic if-shell , the shell command .Xr true 1 , .Ic split-window and .Ic kill-session in that order. .Pp The .Sx COMMANDS section lists the .Nm commands and their arguments. .Sh PARSING SYNTAX This section describes the syntax of commands parsed by .Nm , for example in a configuration file or at the command prompt. Note that when commands are entered into the shell, they are parsed by the shell - see for example .Xr ksh 1 or .Xr csh 1 . .Pp Each command is terminated by a newline or a semicolon (;). Commands separated by semicolons together form a .Ql command sequence - if a command in the sequence encounters an error, no subsequent commands are executed. .Pp It is recommended that a semicolon used as a command separator should be written as an individual token, for example from .Xr sh 1 : .Bd -literal -offset indent $ tmux neww \\; splitw .Ed .Pp Or: .Bd -literal -offset indent $ tmux neww ';' splitw .Ed .Pp Or from the tmux command prompt: .Bd -literal -offset indent neww ; splitw .Ed .Pp However, a trailing semicolon is also interpreted as a command separator, for example in these .Xr sh 1 commands: .Bd -literal -offset indent $ tmux neww\e\e; splitw .Ed .Pp Or: .Bd -literal -offset indent $ tmux 'neww;' splitw .Ed .Pp As in these examples, when running tmux from the shell extra care must be taken to properly quote semicolons: .Bl -enum -offset Ds .It Semicolons that should be interpreted as a command separator should be escaped according to the shell conventions. For .Xr sh 1 this typically means quoted (such as .Ql neww ';' splitw ) or escaped (such as .Ql neww \e\e\e\e; splitw ) . .It Individual semicolons or trailing semicolons that should be interpreted as arguments should be escaped twice: once according to the shell conventions and a second time for .Nm ; for example: .Bd -literal -offset indent $ tmux neww 'foo\e\e;' bar $ tmux neww foo\e\e\e\e; bar .Ed .It Semicolons that are not individual tokens or trailing another token should only be escaped once according to shell conventions; for example: .Bd -literal -offset indent $ tmux neww 'foo-;-bar' $ tmux neww foo-\e\e;-bar .Ed .El .Pp Comments are marked by the unquoted # character - any remaining text after a comment is ignored until the end of the line. .Pp If the last character of a line is \e, the line is joined with the following line (the \e and the newline are completely removed). This is called line continuation and applies both inside and outside quoted strings and in comments, but not inside braces. .Pp Command arguments may be specified as strings surrounded by single (') quotes, double quotes (") or braces ({}). .\" " This is required when the argument contains any special character. Single and double quoted strings cannot span multiple lines except with line continuation. Braces can span multiple lines. .Pp Outside of quotes and inside double quotes, these replacements are performed: .Bl -dash -offset indent .It Environment variables preceded by $ are replaced with their value from the global environment (see the .Sx GLOBAL AND SESSION ENVIRONMENT section). .It A leading ~ or ~user is expanded to the home directory of the current or specified user. .It \euXXXX or \euXXXXXXXX is replaced by the Unicode codepoint corresponding to the given four or eight digit hexadecimal number. .It When preceded (escaped) by a \e, the following characters are replaced: \ee by the escape character; \er by a carriage return; \en by a newline; and \et by a tab. .It \eooo is replaced by a character of the octal value ooo. Three octal digits are required, for example \e001. The largest valid character is \e377. .It Any other characters preceded by \e are replaced by themselves (that is, the \e is removed) and are not treated as having any special meaning - so for example \e; will not mark a command sequence and \e$ will not expand an environment variable. .El .Pp Braces are parsed as a configuration file (so conditions such as .Ql %if are processed) and then converted into a string. They are designed to avoid the need for additional escaping when passing a group of .Nm commands as an argument (for example to .Ic if-shell ) . These two examples produce an identical command - note that no escaping is needed when using {}: .Bd -literal -offset indent if-shell true { display -p 'brace-dollar-foo: }$foo' } if-shell true "display -p 'brace-dollar-foo: }\e$foo'" .Ed .Pp Braces may be enclosed inside braces, for example: .Bd -literal -offset indent bind x if-shell "true" { if-shell "true" { display "true!" } } .Ed .Pp Environment variables may be set by using the syntax .Ql name=value , for example .Ql HOME=/home/user . Variables set during parsing are added to the global environment. A hidden variable may be set with .Ql %hidden , for example: .Bd -literal -offset indent %hidden MYVAR=42 .Ed .Pp Hidden variables are not passed to the environment of processes created by tmux. See the .Sx GLOBAL AND SESSION ENVIRONMENT section. .Pp Commands may be parsed conditionally by surrounding them with .Ql %if , .Ql %elif , .Ql %else and .Ql %endif . The argument to .Ql %if and .Ql %elif is expanded as a format (see .Sx FORMATS ) and if it evaluates to false (zero or empty), subsequent text is ignored until the closing .Ql %elif , .Ql %else or .Ql %endif . For example: .Bd -literal -offset indent %if "#{==:#{host},myhost}" set -g status-style bg=red %elif "#{==:#{host},myotherhost}" set -g status-style bg=green %else set -g status-style bg=blue %endif .Ed .Pp Will change the status line to red if running on .Ql myhost , green if running on .Ql myotherhost , or blue if running on another host. Conditionals may be given on one line, for example: .Bd -literal -offset indent %if #{==:#{host},myhost} set -g status-style bg=red %endif .Ed .Sh COMMANDS This section describes the commands supported by .Nm . Most commands accept the optional .Fl t (and sometimes .Fl s ) argument with one of .Ar target-client , .Ar target-session , .Ar target-window , or .Ar target-pane . These specify the client, session, window or pane which a command should affect. .Pp .Ar target-client should be the name of the client, typically the .Xr pty 4 file to which the client is connected, for example either of .Pa /dev/ttyp1 or .Pa ttyp1 for the client attached to .Pa /dev/ttyp1 . If no client is specified, .Nm attempts to work out the client currently in use; if that fails, an error is reported. Clients may be listed with the .Ic list-clients command. .Pp .Ar target-session is tried as, in order: .Bl -enum -offset Ds .It A session ID prefixed with a $. .It An exact name of a session (as listed by the .Ic list-sessions command). .It The start of a session name, for example .Ql mysess would match a session named .Ql mysession . .It An .Xr fnmatch 3 pattern which is matched against the session name. .El .Pp If the session name is prefixed with an .Ql = , only an exact match is accepted (so .Ql =mysess will only match exactly .Ql mysess , not .Ql mysession ) . .Pp If a single session is found, it is used as the target session; multiple matches produce an error. If a session is omitted, the current session is used if available; if no current session is available, the most recently used is chosen. .Pp .Ar target-window (or .Ar src-window or .Ar dst-window ) specifies a window in the form .Em session Ns \&: Ns Em window . .Em session follows the same rules as for .Ar target-session , and .Em window is looked for in order as: .Bl -enum -offset Ds .It A special token, listed below. .It A window index, for example .Ql mysession:1 is window 1 in session .Ql mysession . .It A window ID, such as @1. .It An exact window name, such as .Ql mysession:mywindow . .It The start of a window name, such as .Ql mysession:mywin . .It As an .Xr fnmatch 3 pattern matched against the window name. .El .Pp Like sessions, a .Ql = prefix will do an exact match only. An empty window name specifies the next unused index if appropriate (for example the .Ic new-window and .Ic link-window commands) otherwise the current window in .Em session is chosen. .Pp The following special tokens are available to indicate particular windows. Each has a single-character alternative form. .Bl -column "XXXXXXXXXX" "X" .It Sy "Token" Ta Sy "" Ta Sy "Meaning" .It Li "{start}" Ta "^" Ta "The lowest-numbered window" .It Li "{end}" Ta "$" Ta "The highest-numbered window" .It Li "{last}" Ta "!" Ta "The last (previously current) window" .It Li "{next}" Ta "+" Ta "The next window by number" .It Li "{previous}" Ta "-" Ta "The previous window by number" .El .Pp .Ar target-pane (or .Ar src-pane or .Ar dst-pane ) may be a pane ID or takes a similar form to .Ar target-window but with the optional addition of a period followed by a pane index or pane ID, for example: .Ql mysession:mywindow.1 . If the pane index is omitted, the currently active pane in the specified window is used. The following special tokens are available for the pane index: .Bl -column "XXXXXXXXXXXXXX" "X" .It Sy "Token" Ta Sy "" Ta Sy "Meaning" .It Li "{last}" Ta "!" Ta "The last (previously active) pane" .It Li "{next}" Ta "+" Ta "The next pane by number" .It Li "{previous}" Ta "-" Ta "The previous pane by number" .It Li "{top}" Ta "" Ta "The top pane" .It Li "{bottom}" Ta "" Ta "The bottom pane" .It Li "{left}" Ta "" Ta "The leftmost pane" .It Li "{right}" Ta "" Ta "The rightmost pane" .It Li "{top-left}" Ta "" Ta "The top-left pane" .It Li "{top-right}" Ta "" Ta "The top-right pane" .It Li "{bottom-left}" Ta "" Ta "The bottom-left pane" .It Li "{bottom-right}" Ta "" Ta "The bottom-right pane" .It Li "{up-of}" Ta "" Ta "The pane above the active pane" .It Li "{down-of}" Ta "" Ta "The pane below the active pane" .It Li "{left-of}" Ta "" Ta "The pane to the left of the active pane" .It Li "{right-of}" Ta "" Ta "The pane to the right of the active pane" .El .Pp The tokens .Ql + and .Ql - may be followed by an offset, for example: .Bd -literal -offset indent select-window -t:+2 .Ed .Pp In addition, .Em target-session , .Em target-window or .Em target-pane may consist entirely of the token .Ql {mouse} (alternative form .Ql = ) to specify the session, window or pane where the most recent mouse event occurred (see the .Sx MOUSE SUPPORT section) or .Ql {marked} (alternative form .Ql ~ ) to specify the marked pane (see .Ic select-pane .Fl m ) . .Pp Sessions, window and panes are each numbered with a unique ID; session IDs are prefixed with a .Ql $ , windows with a .Ql @ , and panes with a .Ql % . These are unique and are unchanged for the life of the session, window or pane in the .Nm server. The pane ID is passed to the child process of the pane in the .Ev TMUX_PANE environment variable. IDs may be displayed using the .Ql session_id , .Ql window_id , or .Ql pane_id formats (see the .Sx FORMATS section) and the .Ic display-message , .Ic list-sessions , .Ic list-windows or .Ic list-panes commands. .Pp .Ar shell-command arguments are .Xr sh 1 commands. This may be a single argument passed to the shell, for example: .Bd -literal -offset indent new-window 'vi ~/.tmux.conf' .Ed .Pp Will run: .Bd -literal -offset indent /bin/sh -c 'vi ~/.tmux.conf' .Ed .Pp Additionally, the .Ic new-window , .Ic new-session , .Ic split-window , .Ic respawn-window and .Ic respawn-pane commands allow .Ar shell-command to be given as multiple arguments and executed directly (without .Ql sh -c ) . This can avoid issues with shell quoting. For example: .Bd -literal -offset indent $ tmux new-window vi ~/.tmux.conf .Ed .Pp Will run .Xr vi 1 directly without invoking the shell. .Pp .Ar command .Op Ar arguments refers to a .Nm command, either passed with the command and arguments separately, for example: .Bd -literal -offset indent bind-key F1 set-option status off .Ed .Pp Or passed as a single string argument in .Pa .tmux.conf , for example: .Bd -literal -offset indent bind-key F1 { set-option status off } .Ed .Pp Example .Nm commands include: .Bd -literal -offset indent refresh-client -t/dev/ttyp2 rename-session -tfirst newname set-option -wt:0 monitor-activity on new-window ; split-window -d bind-key R source-file ~/.tmux.conf \e; \e display-message "source-file done" .Ed .Pp Or from .Xr sh 1 : .Bd -literal -offset indent $ tmux kill-window -t :1 $ tmux new-window \e; split-window -d $ tmux new-session -d 'vi ~/.tmux.conf' \e; split-window -d \e; attach .Ed .Sh CLIENTS AND SESSIONS The .Nm server manages clients, sessions, windows and panes. Clients are attached to sessions to interact with them, either when they are created with the .Ic new-session command, or later with the .Ic attach-session command. Each session has one or more windows .Em linked into it. Windows may be linked to multiple sessions and are made up of one or more panes, each of which contains a pseudo terminal. Commands for creating, linking and otherwise manipulating windows are covered in the .Sx WINDOWS AND PANES section. .Pp The following commands are available to manage clients and sessions: .Bl -tag -width Ds .Tg attach .It Xo Ic attach-session .Op Fl dErx .Op Fl c Ar working-directory .Op Fl f Ar flags .Op Fl t Ar target-session .Xc .D1 Pq alias: Ic attach If run from outside .Nm , create a new client in the current terminal and attach it to .Ar target-session . If used from inside, switch the current client. If .Fl d is specified, any other clients attached to the session are detached. If .Fl x is given, send .Dv SIGHUP to the parent process of the client as well as detaching the client, typically causing it to exit. .Fl f sets a comma-separated list of client flags. The flags are: .Bl -tag -width Ds .It active-pane the client has an independent active pane .It ignore-size the client does not affect the size of other clients .It no-output the client does not receive pane output in control mode .It pause-after=seconds output is paused once the pane is .Ar seconds behind in control mode .It read-only the client is read-only .It wait-exit wait for an empty line input before exiting in control mode .El .Pp A leading .Ql \&! turns a flag off if the client is already attached. .Fl r is an alias for .Fl f .Ar read-only,ignore-size . When a client is read-only, only keys bound to the .Ic detach-client or .Ic switch-client commands have any effect. A client with the .Ar active-pane flag allows the active pane to be selected independently of the window's active pane used by clients without the flag. This only affects the cursor position and commands issued from the client; other features such as hooks and styles continue to use the window's active pane. .Pp If no server is started, .Ic attach-session will attempt to start it; this will fail unless sessions are created in the configuration file. .Pp The .Ar target-session rules for .Ic attach-session are slightly adjusted: if .Nm needs to select the most recently used session, it will prefer the most recently used .Em unattached session. .Pp .Fl c will set the session working directory (used for new windows) to .Ar working-directory . .Pp If .Fl E is used, the .Ic update-environment option will not be applied. .Tg detach .It Xo Ic detach-client .Op Fl aP .Op Fl E Ar shell-command .Op Fl s Ar target-session .Op Fl t Ar target-client .Xc .D1 Pq alias: Ic detach Detach the current client if bound to a key, the client specified with .Fl t , or all clients currently attached to the session specified by .Fl s . The .Fl a option kills all but the client given with .Fl t . If .Fl P is given, send .Dv SIGHUP to the parent process of the client, typically causing it to exit. With .Fl E , run .Ar shell-command to replace the client. .Tg has .It Ic has-session Op Fl t Ar target-session .D1 Pq alias: Ic has Report an error and exit with 1 if the specified session does not exist. If it does exist, exit with 0. .It Ic kill-server Kill the .Nm server and clients and destroy all sessions. .It Xo Ic kill-session .Op Fl aC .Op Fl t Ar target-session .Xc Destroy the given session, closing any windows linked to it and no other sessions, and detaching all clients attached to it. If .Fl a is given, all sessions but the specified one is killed. The .Fl C flag clears alerts (bell, activity, or silence) in all windows linked to the session. .Tg lsc .It Xo Ic list-clients .Op Fl F Ar format .Op Fl t Ar target-session .Xc .D1 Pq alias: Ic lsc List all clients attached to the server. For the meaning of the .Fl F flag, see the .Sx FORMATS section. If .Ar target-session is specified, list only clients connected to that session. .Tg lscm .It Xo Ic list-commands .Op Fl F Ar format .Op Ar command .Xc .D1 Pq alias: Ic lscm List the syntax of .Ar command or - if omitted - of all commands supported by .Nm . .Tg ls .It Xo Ic list-sessions .Op Fl F Ar format .Op Fl f Ar filter .Xc .D1 Pq alias: Ic ls List all sessions managed by the server. .Fl F specifies the format of each line and .Fl f a filter. Only sessions for which the filter is true are shown. See the .Sx FORMATS section. .Tg lockc .It Ic lock-client Op Fl t Ar target-client .D1 Pq alias: Ic lockc Lock .Ar target-client , see the .Ic lock-server command. .Tg locks .It Ic lock-session Op Fl t Ar target-session .D1 Pq alias: Ic locks Lock all clients attached to .Ar target-session . .Tg new .It Xo Ic new-session .Op Fl AdDEPX .Op Fl c Ar start-directory .Op Fl e Ar environment .Op Fl f Ar flags .Op Fl F Ar format .Op Fl n Ar window-name .Op Fl s Ar session-name .Op Fl t Ar group-name .Op Fl x Ar width .Op Fl y Ar height .Op Ar shell-command .Xc .D1 Pq alias: Ic new Create a new session with name .Ar session-name . .Pp The new session is attached to the current terminal unless .Fl d is given. .Ar window-name and .Ar shell-command are the name of and shell command to execute in the initial window. With .Fl d , the initial size comes from the global .Ic default-size option; .Fl x and .Fl y can be used to specify a different size. .Ql - uses the size of the current client if any. If .Fl x or .Fl y is given, the .Ic default-size option is set for the session. .Fl f sets a comma-separated list of client flags (see .Ic attach-session ) . .Pp If run from a terminal, any .Xr termios 4 special characters are saved and used for new windows in the new session. .Pp The .Fl A flag makes .Ic new-session behave like .Ic attach-session if .Ar session-name already exists; in this case, .Fl D behaves like .Fl d to .Ic attach-session , and .Fl X behaves like .Fl x to .Ic attach-session . .Pp If .Fl t is given, it specifies a .Ic session group . Sessions in the same group share the same set of windows - new windows are linked to all sessions in the group and any windows closed removed from all sessions. The current and previous window and any session options remain independent and any session in a group may be killed without affecting the others. The .Ar group-name argument may be: .Bl -enum -width Ds .It the name of an existing group, in which case the new session is added to that group; .It the name of an existing session - the new session is added to the same group as that session, creating a new group if necessary; .It the name for a new group containing only the new session. .El .Pp .Fl n and .Ar shell-command are invalid if .Fl t is used. .Pp The .Fl P option prints information about the new session after it has been created. By default, it uses the format .Ql #{session_name}:\& but a different format may be specified with .Fl F . .Pp If .Fl E is used, the .Ic update-environment option will not be applied. .Fl e takes the form .Ql VARIABLE=value and sets an environment variable for the newly created session; it may be specified multiple times. .Tg refresh .It Xo Ic refresh-client .Op Fl cDlLRSU .Op Fl A Ar pane:state .Op Fl B Ar name:what:format .Op Fl C Ar size .Op Fl f Ar flags .Op Fl t Ar target-client .Op Ar adjustment .Xc .D1 Pq alias: Ic refresh Refresh the current client if bound to a key, or a single client if one is given with .Fl t . If .Fl S is specified, only update the client's status line. .Pp The .Fl U , .Fl D , .Fl L .Fl R , and .Fl c flags allow the visible portion of a window which is larger than the client to be changed. .Fl U moves the visible part up by .Ar adjustment rows and .Fl D down, .Fl L left by .Ar adjustment columns and .Fl R right. .Fl c returns to tracking the cursor automatically. If .Ar adjustment is omitted, 1 is used. Note that the visible position is a property of the client not of the window, changing the current window in the attached session will reset it. .Pp .Fl C sets the width and height of a control mode client or of a window for a control mode client, .Ar size must be one of .Ql widthxheight or .Ql window ID:widthxheight , for example .Ql 80x24 or .Ql @0:80x24 . .Fl A allows a control mode client to trigger actions on a pane. The argument is a pane ID (with leading .Ql % ) , a colon, then one of .Ql on , .Ql off , .Ql continue or .Ql pause . If .Ql off , .Nm will not send output from the pane to the client and if all clients have turned the pane off, will stop reading from the pane. If .Ql continue , .Nm will return to sending output to the pane if it was paused (manually or with the .Ar pause-after flag). If .Ql pause , .Nm will pause the pane. .Fl A may be given multiple times for different panes. .Pp .Fl B sets a subscription to a format for a control mode client. The argument is split into three items by colons: .Ar name is a name for the subscription; .Ar what is a type of item to subscribe to; .Ar format is the format. After a subscription is added, changes to the format are reported with the .Ic %subscription-changed notification, at most once a second. If only the name is given, the subscription is removed. .Ar what may be empty to check the format only for the attached session, or one of: a pane ID such as .Ql %0 ; .Ql %* for all panes in the attached session; a window ID such as .Ql @0 ; or .Ql @* for all windows in the attached session. .Pp .Fl f sets a comma-separated list of client flags, see .Ic attach-session . .Pp .Fl l requests the clipboard from the client using the .Xr xterm 1 escape sequence and stores it in a new paste buffer. .Pp .Fl L , .Fl R , .Fl U and .Fl D move the visible portion of the window left, right, up or down by .Ar adjustment , if the window is larger than the client. .Fl c resets so that the position follows the cursor. See the .Ic window-size option. .Tg rename .It Xo Ic rename-session .Op Fl t Ar target-session .Ar new-name .Xc .D1 Pq alias: Ic rename Rename the session to .Ar new-name . .Tg showmsgs .It Xo Ic show-messages .Op Fl JT .Op Fl t Ar target-client .Xc .D1 Pq alias: Ic showmsgs Show server messages or information. Messages are stored, up to a maximum of the limit set by the .Ar message-limit server option. .Fl J and .Fl T show debugging information about jobs and terminals. .Tg source .It Xo Ic source-file .Op Fl Fnqv .Ar path .Ar ... .Xc .D1 Pq alias: Ic source Execute commands from one or more files specified by .Ar path (which may be .Xr glob 7 patterns). If .Fl F is present, then .Ar path is expanded as a format. If .Fl q is given, no error will be returned if .Ar path does not exist. With .Fl n , the file is parsed but no commands are executed. .Fl v shows the parsed commands and line numbers if possible. .Tg start .It Ic start-server .D1 Pq alias: Ic start Start the .Nm server, if not already running, without creating any sessions. .Pp Note that as by default the .Nm server will exit with no sessions, this is only useful if a session is created in .Pa ~/.tmux.conf , .Ic exit-empty is turned off, or another command is run as part of the same command sequence. For example: .Bd -literal -offset indent $ tmux start \\; show -g .Ed .Tg suspendc .It Xo Ic suspend-client .Op Fl t Ar target-client .Xc .D1 Pq alias: Ic suspendc Suspend a client by sending .Dv SIGTSTP (tty stop). .Tg switchc .It Xo Ic switch-client .Op Fl ElnprZ .Op Fl c Ar target-client .Op Fl t Ar target-session .Op Fl T Ar key-table .Xc .D1 Pq alias: Ic switchc Switch the current session for client .Ar target-client to .Ar target-session . As a special case, .Fl t may refer to a pane (a target that contains .Ql \&: , .Ql \&. or .Ql % ) , to change session, window and pane. In that case, .Fl Z keeps the window zoomed if it was zoomed. If .Fl l , .Fl n or .Fl p is used, the client is moved to the last, next or previous session respectively. .Fl r toggles the client .Ic read-only and .Ic ignore-size flags (see the .Ic attach-session command). .Pp If .Fl E is used, .Ic update-environment option will not be applied. .Pp .Fl T sets the client's key table; the next key from the client will be interpreted from .Ar key-table . This may be used to configure multiple prefix keys, or to bind commands to sequences of keys. For example, to make typing .Ql abc run the .Ic list-keys command: .Bd -literal -offset indent bind-key -Ttable2 c list-keys bind-key -Ttable1 b switch-client -Ttable2 bind-key -Troot a switch-client -Ttable1 .Ed .El .Sh WINDOWS AND PANES Each window displayed by .Nm may be split into one or more .Em panes ; each pane takes up a certain area of the display and is a separate terminal. A window may be split into panes using the .Ic split-window command. Windows may be split horizontally (with the .Fl h flag) or vertically. Panes may be resized with the .Ic resize-pane command (bound to .Ql C-Up , .Ql C-Down .Ql C-Left and .Ql C-Right by default), the current pane may be changed with the .Ic select-pane command and the .Ic rotate-window and .Ic swap-pane commands may be used to swap panes without changing their position. Panes are numbered beginning from zero in the order they are created. .Pp By default, a .Nm pane permits direct access to the terminal contained in the pane. A pane may also be put into one of several modes: .Bl -dash -offset indent .It Copy mode, which permits a section of a window or its history to be copied to a .Em paste buffer for later insertion into another window. This mode is entered with the .Ic copy-mode command, bound to .Ql \&[ by default. Copied text can be pasted with the .Ic paste-buffer command, bound to .Ql \&] . .It View mode, which is like copy mode but is entered when a command that produces output, such as .Ic list-keys , is executed from a key binding. .It Choose mode, which allows an item to be chosen from a list. This may be a client, a session or window or pane, or a buffer. This mode is entered with the .Ic choose-buffer , .Ic choose-client and .Ic choose-tree commands. .El .Pp In copy mode an indicator is displayed in the top-right corner of the pane with the current position and the number of lines in the history. .Pp Commands are sent to copy mode using the .Fl X flag to the .Ic send-keys command. When a key is pressed, copy mode automatically uses one of two key tables, depending on the .Ic mode-keys option: .Ic copy-mode for emacs, or .Ic copy-mode-vi for vi. Key tables may be viewed with the .Ic list-keys command. .Pp The following commands are supported in copy mode: .Bl -column "CommandXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX" "viXXXXXXXXXX" "emacs" -offset indent .It Sy "Command" Ta Sy "vi" Ta Sy "emacs" .It Li "append-selection" Ta "" Ta "" .It Li "append-selection-and-cancel" Ta "A" Ta "" .It Li "back-to-indentation" Ta "^" Ta "M-m" .It Li "begin-selection" Ta "Space" Ta "C-Space" .It Li "bottom-line" Ta "L" Ta "" .It Li "cancel" Ta "q" Ta "Escape" .It Li "clear-selection" Ta "Escape" Ta "C-g" .It Li "copy-end-of-line []" Ta "" Ta "" .It Li "copy-end-of-line-and-cancel []" Ta "" Ta "" .It Li "copy-pipe-end-of-line [] []" Ta "" Ta "" .It Li "copy-pipe-end-of-line-and-cancel [] []" Ta "D" Ta "C-k" .It Li "copy-line []" Ta "" Ta "" .It Li "copy-line-and-cancel []" Ta "" Ta "" .It Li "copy-pipe-line [] []" Ta "" Ta "" .It Li "copy-pipe-line-and-cancel [] []" Ta "" Ta "" .It Li "copy-pipe [] []" Ta "" Ta "" .It Li "copy-pipe-no-clear [] []" Ta "" Ta "" .It Li "copy-pipe-and-cancel [] []" Ta "" Ta "" .It Li "copy-selection []" Ta "" Ta "" .It Li "copy-selection-no-clear []" Ta "" Ta "" .It Li "copy-selection-and-cancel []" Ta "Enter" Ta "M-w" .It Li "cursor-down" Ta "j" Ta "Down" .It Li "cursor-down-and-cancel" Ta "" Ta "" .It Li "cursor-left" Ta "h" Ta "Left" .It Li "cursor-right" Ta "l" Ta "Right" .It Li "cursor-up" Ta "k" Ta "Up" .It Li "end-of-line" Ta "$" Ta "C-e" .It Li "goto-line " Ta ":" Ta "g" .It Li "halfpage-down" Ta "C-d" Ta "M-Down" .It Li "halfpage-down-and-cancel" Ta "" Ta "" .It Li "halfpage-up" Ta "C-u" Ta "M-Up" .It Li "history-bottom" Ta "G" Ta "M->" .It Li "history-top" Ta "g" Ta "M-<" .It Li "jump-again" Ta ";" Ta ";" .It Li "jump-backward " Ta "F" Ta "F" .It Li "jump-forward " Ta "f" Ta "f" .It Li "jump-reverse" Ta "," Ta "," .It Li "jump-to-backward " Ta "T" Ta "" .It Li "jump-to-forward " Ta "t" Ta "" .It Li "jump-to-mark" Ta "M-x" Ta "M-x" .It Li "middle-line" Ta "M" Ta "M-r" .It Li "next-matching-bracket" Ta "%" Ta "M-C-f" .It Li "next-paragraph" Ta "}" Ta "M-}" .It Li "next-space" Ta "W" Ta "" .It Li "next-space-end" Ta "E" Ta "" .It Li "next-word" Ta "w" Ta "" .It Li "next-word-end" Ta "e" Ta "M-f" .It Li "other-end" Ta "o" Ta "" .It Li "page-down" Ta "C-f" Ta "PageDown" .It Li "page-down-and-cancel" Ta "" Ta "" .It Li "page-up" Ta "C-b" Ta "PageUp" .It Li "pipe [] []" Ta "" Ta "" .It Li "pipe-no-clear [] []" Ta "" Ta "" .It Li "pipe-and-cancel [] []" Ta "" Ta "" .It Li "previous-matching-bracket" Ta "" Ta "M-C-b" .It Li "previous-paragraph" Ta "{" Ta "M-{" .It Li "previous-space" Ta "B" Ta "" .It Li "previous-word" Ta "b" Ta "M-b" .It Li "rectangle-on" Ta "" Ta "" .It Li "rectangle-off" Ta "" Ta "" .It Li "rectangle-toggle" Ta "v" Ta "R" .It Li "refresh-from-pane" Ta "r" Ta "r" .It Li "scroll-down" Ta "C-e" Ta "C-Down" .It Li "scroll-down-and-cancel" Ta "" Ta "" .It Li "scroll-up" Ta "C-y" Ta "C-Up" .It Li "search-again" Ta "n" Ta "n" .It Li "search-backward " Ta "?" Ta "" .It Li "search-backward-incremental " Ta "" Ta "C-r" .It Li "search-backward-text " Ta "" Ta "" .It Li "search-forward " Ta "/" Ta "" .It Li "search-forward-incremental " Ta "" Ta "C-s" .It Li "search-forward-text " Ta "" Ta "" .It Li "search-reverse" Ta "N" Ta "N" .It Li "select-line" Ta "V" Ta "" .It Li "select-word" Ta "" Ta "" .It Li "set-mark" Ta "X" Ta "X" .It Li "start-of-line" Ta "0" Ta "C-a" .It Li "stop-selection" Ta "" Ta "" .It Li "toggle-position" Ta "P" Ta "P" .It Li "top-line" Ta "H" Ta "M-R" .El .Pp The search commands come in several varieties: .Ql search-forward and .Ql search-backward search for a regular expression; the .Ql -text variants search for a plain text string rather than a regular expression; .Ql -incremental perform an incremental search and expect to be used with the .Fl i flag to the .Ic command-prompt command. .Ql search-again repeats the last search and .Ql search-reverse does the same but reverses the direction (forward becomes backward and backward becomes forward). .Pp Copy commands may take an optional buffer prefix argument which is used to generate the buffer name (the default is .Ql buffer so buffers are named .Ql buffer0 , .Ql buffer1 and so on). Pipe commands take a command argument which is the command to which the selected text is piped. .Ql copy-pipe variants also copy the selection. The .Ql -and-cancel variants of some commands exit copy mode after they have completed (for copy commands) or when the cursor reaches the bottom (for scrolling commands). .Ql -no-clear variants do not clear the selection. .Pp The next and previous word keys skip over whitespace and treat consecutive runs of either word separators or other letters as words. Word separators can be customized with the .Em word-separators session option. Next word moves to the start of the next word, next word end to the end of the next word and previous word to the start of the previous word. The three next and previous space keys work similarly but use a space alone as the word separator. Setting .Em word-separators to the empty string makes next/previous word equivalent to next/previous space. .Pp The jump commands enable quick movement within a line. For instance, typing .Ql f followed by .Ql / will move the cursor to the next .Ql / character on the current line. A .Ql \&; will then jump to the next occurrence. .Pp Commands in copy mode may be prefaced by an optional repeat count. With vi key bindings, a prefix is entered using the number keys; with emacs, the Alt (meta) key and a number begins prefix entry. .Pp The synopsis for the .Ic copy-mode command is: .Bl -tag -width Ds .It Xo Ic copy-mode .Op Fl eHMqu .Op Fl s Ar src-pane .Op Fl t Ar target-pane .Xc Enter copy mode. The .Fl u option scrolls one page up. .Fl M begins a mouse drag (only valid if bound to a mouse key binding, see .Sx MOUSE SUPPORT ) . .Fl H hides the position indicator in the top right. .Fl q cancels copy mode and any other modes. .Fl s copies from .Ar src-pane instead of .Ar target-pane . .Pp .Fl e specifies that scrolling to the bottom of the history (to the visible screen) should exit copy mode. While in copy mode, pressing a key other than those used for scrolling will disable this behaviour. This is intended to allow fast scrolling through a pane's history, for example with: .Bd -literal -offset indent bind PageUp copy-mode -eu .Ed .El .Pp A number of preset arrangements of panes are available, these are called layouts. These may be selected with the .Ic select-layout command or cycled with .Ic next-layout (bound to .Ql Space by default); once a layout is chosen, panes within it may be moved and resized as normal. .Pp The following layouts are supported: .Bl -tag -width Ds .It Ic even-horizontal Panes are spread out evenly from left to right across the window. .It Ic even-vertical Panes are spread evenly from top to bottom. .It Ic main-horizontal A large (main) pane is shown at the top of the window and the remaining panes are spread from left to right in the leftover space at the bottom. Use the .Em main-pane-height window option to specify the height of the top pane. .It Ic main-vertical Similar to .Ic main-horizontal but the large pane is placed on the left and the others spread from top to bottom along the right. See the .Em main-pane-width window option. .It Ic tiled Panes are spread out as evenly as possible over the window in both rows and columns. .El .Pp In addition, .Ic select-layout may be used to apply a previously used layout - the .Ic list-windows command displays the layout of each window in a form suitable for use with .Ic select-layout . For example: .Bd -literal -offset indent $ tmux list-windows 0: ksh [159x48] layout: bb62,159x48,0,0{79x48,0,0,79x48,80,0} $ tmux select-layout bb62,159x48,0,0{79x48,0,0,79x48,80,0} .Ed .Pp .Nm automatically adjusts the size of the layout for the current window size. Note that a layout cannot be applied to a window with more panes than that from which the layout was originally defined. .Pp Commands related to windows and panes are as follows: .Bl -tag -width Ds .Tg breakp .It Xo Ic break-pane .Op Fl abdP .Op Fl F Ar format .Op Fl n Ar window-name .Op Fl s Ar src-pane .Op Fl t Ar dst-window .Xc .D1 Pq alias: Ic breakp Break .Ar src-pane off from its containing window to make it the only pane in .Ar dst-window . With .Fl a or .Fl b , the window is moved to the next index after or before (existing windows are moved if necessary). If .Fl d is given, the new window does not become the current window. The .Fl P option prints information about the new window after it has been created. By default, it uses the format .Ql #{session_name}:#{window_index}.#{pane_index} but a different format may be specified with .Fl F . .Tg capturep .It Xo Ic capture-pane .Op Fl aepPqCJN .Op Fl b Ar buffer-name .Op Fl E Ar end-line .Op Fl S Ar start-line .Op Fl t Ar target-pane .Xc .D1 Pq alias: Ic capturep Capture the contents of a pane. If .Fl p is given, the output goes to stdout, otherwise to the buffer specified with .Fl b or a new buffer if omitted. If .Fl a is given, the alternate screen is used, and the history is not accessible. If no alternate screen exists, an error will be returned unless .Fl q is given. If .Fl e is given, the output includes escape sequences for text and background attributes. .Fl C also escapes non-printable characters as octal \exxx. .Fl N preserves trailing spaces at each line's end and .Fl J preserves trailing spaces and joins any wrapped lines. .Fl P captures only any output that the pane has received that is the beginning of an as-yet incomplete escape sequence. .Pp .Fl S and .Fl E specify the starting and ending line numbers, zero is the first line of the visible pane and negative numbers are lines in the history. .Ql - to .Fl S is the start of the history and to .Fl E the end of the visible pane. The default is to capture only the visible contents of the pane. .It Xo .Ic choose-client .Op Fl NrZ .Op Fl F Ar format .Op Fl f Ar filter .Op Fl K Ar key-format .Op Fl O Ar sort-order .Op Fl t Ar target-pane .Op Ar template .Xc Put a pane into client mode, allowing a client to be selected interactively from a list. Each client is shown on one line. A shortcut key is shown on the left in brackets allowing for immediate choice, or the list may be navigated and an item chosen or otherwise manipulated using the keys below. .Fl Z zooms the pane. The following keys may be used in client mode: .Bl -column "Key" "Function" -offset indent .It Sy "Key" Ta Sy "Function" .It Li "Enter" Ta "Choose selected client" .It Li "Up" Ta "Select previous client" .It Li "Down" Ta "Select next client" .It Li "C-s" Ta "Search by name" .It Li "n" Ta "Repeat last search" .It Li "t" Ta "Toggle if client is tagged" .It Li "T" Ta "Tag no clients" .It Li "C-t" Ta "Tag all clients" .It Li "d" Ta "Detach selected client" .It Li "D" Ta "Detach tagged clients" .It Li "x" Ta "Detach and HUP selected client" .It Li "X" Ta "Detach and HUP tagged clients" .It Li "z" Ta "Suspend selected client" .It Li "Z" Ta "Suspend tagged clients" .It Li "f" Ta "Enter a format to filter items" .It Li "O" Ta "Change sort field" .It Li "r" Ta "Reverse sort order" .It Li "v" Ta "Toggle preview" .It Li "q" Ta "Exit mode" .El .Pp After a client is chosen, .Ql %% is replaced by the client name in .Ar template and the result executed as a command. If .Ar template is not given, "detach-client -t '%%'" is used. .Pp .Fl O specifies the initial sort field: one of .Ql name , .Ql size , .Ql creation , or .Ql activity . .Fl r reverses the sort order. .Fl f specifies an initial filter: the filter is a format - if it evaluates to zero, the item in the list is not shown, otherwise it is shown. If a filter would lead to an empty list, it is ignored. .Fl F specifies the format for each item in the list and .Fl K a format for each shortcut key; both are evaluated once for each line. .Fl N starts without the preview. This command works only if at least one client is attached. .It Xo .Ic choose-tree .Op Fl GNrswZ .Op Fl F Ar format .Op Fl f Ar filter .Op Fl K Ar key-format .Op Fl O Ar sort-order .Op Fl t Ar target-pane .Op Ar template .Xc Put a pane into tree mode, where a session, window or pane may be chosen interactively from a tree. Each session, window or pane is shown on one line. A shortcut key is shown on the left in brackets allowing for immediate choice, or the tree may be navigated and an item chosen or otherwise manipulated using the keys below. .Fl s starts with sessions collapsed and .Fl w with windows collapsed. .Fl Z zooms the pane. The following keys may be used in tree mode: .Bl -column "Key" "Function" -offset indent .It Sy "Key" Ta Sy "Function" .It Li "Enter" Ta "Choose selected item" .It Li "Up" Ta "Select previous item" .It Li "Down" Ta "Select next item" .It Li "+" Ta "Expand selected item" .It Li "-" Ta "Collapse selected item" .It Li "M-+" Ta "Expand all items" .It Li "M--" Ta "Collapse all items" .It Li "x" Ta "Kill selected item" .It Li "X" Ta "Kill tagged items" .It Li "<" Ta "Scroll list of previews left" .It Li ">" Ta "Scroll list of previews right" .It Li "C-s" Ta "Search by name" .It Li "m" Ta "Set the marked pane" .It Li "M" Ta "Clear the marked pane" .It Li "n" Ta "Repeat last search" .It Li "t" Ta "Toggle if item is tagged" .It Li "T" Ta "Tag no items" .It Li "C-t" Ta "Tag all items" .It Li "\&:" Ta "Run a command for each tagged item" .It Li "f" Ta "Enter a format to filter items" .It Li "H" Ta "Jump to the starting pane" .It Li "O" Ta "Change sort field" .It Li "r" Ta "Reverse sort order" .It Li "v" Ta "Toggle preview" .It Li "q" Ta "Exit mode" .El .Pp After a session, window or pane is chosen, the first instance of .Ql %% and all instances of .Ql %1 are replaced by the target in .Ar template and the result executed as a command. If .Ar template is not given, "switch-client -t '%%'" is used. .Pp .Fl O specifies the initial sort field: one of .Ql index , .Ql name , or .Ql time . .Fl r reverses the sort order. .Fl f specifies an initial filter: the filter is a format - if it evaluates to zero, the item in the list is not shown, otherwise it is shown. If a filter would lead to an empty list, it is ignored. .Fl F specifies the format for each item in the tree and .Fl K a format for each shortcut key; both are evaluated once for each line. .Fl N starts without the preview. .Fl G includes all sessions in any session groups in the tree rather than only the first. This command works only if at least one client is attached. .It Xo .Ic customize-mode .Op Fl NZ .Op Fl F Ar format .Op Fl f Ar filter .Op Fl t Ar target-pane .Op Ar template .Xc Put a pane into customize mode, where options and key bindings may be browsed and modified from a list. Option values in the list are shown for the active pane in the current window. .Fl Z zooms the pane. The following keys may be used in customize mode: .Bl -column "Key" "Function" -offset indent .It Sy "Key" Ta Sy "Function" .It Li "Enter" Ta "Set pane, window, session or global option value" .It Li "Up" Ta "Select previous item" .It Li "Down" Ta "Select next item" .It Li "+" Ta "Expand selected item" .It Li "-" Ta "Collapse selected item" .It Li "M-+" Ta "Expand all items" .It Li "M--" Ta "Collapse all items" .It Li "s" Ta "Set option value or key attribute" .It Li "S" Ta "Set global option value" .It Li "w" Ta "Set window option value, if option is for pane and window" .It Li "d" Ta "Set an option or key to the default" .It Li "D" Ta "Set tagged options and tagged keys to the default" .It Li "u" Ta "Unset an option (set to default value if global) or unbind a key" .It Li "U" Ta "Unset tagged options and unbind tagged keys" .It Li "C-s" Ta "Search by name" .It Li "n" Ta "Repeat last search" .It Li "t" Ta "Toggle if item is tagged" .It Li "T" Ta "Tag no items" .It Li "C-t" Ta "Tag all items" .It Li "f" Ta "Enter a format to filter items" .It Li "v" Ta "Toggle option information" .It Li "q" Ta "Exit mode" .El .Pp .Fl f specifies an initial filter: the filter is a format - if it evaluates to zero, the item in the list is not shown, otherwise it is shown. If a filter would lead to an empty list, it is ignored. .Fl F specifies the format for each item in the tree. .Fl N starts without the option information. This command works only if at least one client is attached. .It Xo .Tg displayp .Ic display-panes .Op Fl bN .Op Fl d Ar duration .Op Fl t Ar target-client .Op Ar template .Xc .D1 Pq alias: Ic displayp Display a visible indicator of each pane shown by .Ar target-client . See the .Ic display-panes-colour and .Ic display-panes-active-colour session options. The indicator is closed when a key is pressed (unless .Fl N is given) or .Ar duration milliseconds have passed. If .Fl d is not given, .Ic display-panes-time is used. A duration of zero means the indicator stays until a key is pressed. While the indicator is on screen, a pane may be chosen with the .Ql 0 to .Ql 9 keys, which will cause .Ar template to be executed as a command with .Ql %% substituted by the pane ID. The default .Ar template is "select-pane -t '%%'". With .Fl b , other commands are not blocked from running until the indicator is closed. .Tg findw .It Xo Ic find-window .Op Fl iCNrTZ .Op Fl t Ar target-pane .Ar match-string .Xc .D1 Pq alias: Ic findw Search for a .Xr fnmatch 3 pattern or, with .Fl r , regular expression .Ar match-string in window names, titles, and visible content (but not history). The flags control matching behavior: .Fl C matches only visible window contents, .Fl N matches only the window name and .Fl T matches only the window title. .Fl i makes the search ignore case. The default is .Fl CNT . .Fl Z zooms the pane. .Pp This command works only if at least one client is attached. .Tg joinp .It Xo Ic join-pane .Op Fl bdfhv .Op Fl l Ar size .Op Fl s Ar src-pane .Op Fl t Ar dst-pane .Xc .D1 Pq alias: Ic joinp Like .Ic split-window , but instead of splitting .Ar dst-pane and creating a new pane, split it and move .Ar src-pane into the space. This can be used to reverse .Ic break-pane . The .Fl b option causes .Ar src-pane to be joined to left of or above .Ar dst-pane . .Pp If .Fl s is omitted and a marked pane is present (see .Ic select-pane .Fl m ) , the marked pane is used rather than the current pane. .Tg killp .It Xo Ic kill-pane .Op Fl a .Op Fl t Ar target-pane .Xc .D1 Pq alias: Ic killp Destroy the given pane. If no panes remain in the containing window, it is also destroyed. The .Fl a option kills all but the pane given with .Fl t . .Tg killw .It Xo Ic kill-window .Op Fl a .Op Fl t Ar target-window .Xc .D1 Pq alias: Ic killw Kill the current window or the window at .Ar target-window , removing it from any sessions to which it is linked. The .Fl a option kills all but the window given with .Fl t . .Tg lastp .It Xo Ic last-pane .Op Fl deZ .Op Fl t Ar target-window .Xc .D1 Pq alias: Ic lastp Select the last (previously selected) pane. .Fl Z keeps the window zoomed if it was zoomed. .Fl e enables or .Fl d disables input to the pane. .Tg last .It Ic last-window Op Fl t Ar target-session .D1 Pq alias: Ic last Select the last (previously selected) window. If no .Ar target-session is specified, select the last window of the current session. .Tg link .It Xo Ic link-window .Op Fl abdk .Op Fl s Ar src-window .Op Fl t Ar dst-window .Xc .D1 Pq alias: Ic linkw Link the window at .Ar src-window to the specified .Ar dst-window . If .Ar dst-window is specified and no such window exists, the .Ar src-window is linked there. With .Fl a or .Fl b the window is moved to the next index after or before .Ar dst-window (existing windows are moved if necessary). If .Fl k is given and .Ar dst-window exists, it is killed, otherwise an error is generated. If .Fl d is given, the newly linked window is not selected. .Tg lsp .It Xo Ic list-panes .Op Fl as .Op Fl F Ar format .Op Fl f Ar filter .Op Fl t Ar target .Xc .D1 Pq alias: Ic lsp If .Fl a is given, .Ar target is ignored and all panes on the server are listed. If .Fl s is given, .Ar target is a session (or the current session). If neither is given, .Ar target is a window (or the current window). .Fl F specifies the format of each line and .Fl f a filter. Only panes for which the filter is true are shown. See the .Sx FORMATS section. .Tg lsw .It Xo Ic list-windows .Op Fl a .Op Fl F Ar format .Op Fl f Ar filter .Op Fl t Ar target-session .Xc .D1 Pq alias: Ic lsw If .Fl a is given, list all windows on the server. Otherwise, list windows in the current session or in .Ar target-session . .Fl F specifies the format of each line and .Fl f a filter. Only windows for which the filter is true are shown. See the .Sx FORMATS section. .Tg movep .It Xo Ic move-pane .Op Fl bdfhv .Op Fl l Ar size .Op Fl s Ar src-pane .Op Fl t Ar dst-pane .Xc .D1 Pq alias: Ic movep Does the same as .Ic join-pane . .Tg movew .It Xo Ic move-window .Op Fl abrdk .Op Fl s Ar src-window .Op Fl t Ar dst-window .Xc .D1 Pq alias: Ic movew This is similar to .Ic link-window , except the window at .Ar src-window is moved to .Ar dst-window . With .Fl r , all windows in the session are renumbered in sequential order, respecting the .Ic base-index option. .Tg neww .It Xo Ic new-window .Op Fl abdkPS .Op Fl c Ar start-directory .Op Fl e Ar environment .Op Fl F Ar format .Op Fl n Ar window-name .Op Fl t Ar target-window .Op Ar shell-command .Xc .D1 Pq alias: Ic neww Create a new window. With .Fl a or .Fl b , the new window is inserted at the next index after or before the specified .Ar target-window , moving windows up if necessary; otherwise .Ar target-window is the new window location. .Pp If .Fl d is given, the session does not make the new window the current window. .Ar target-window represents the window to be created; if the target already exists an error is shown, unless the .Fl k flag is used, in which case it is destroyed. If .Fl S is given and a window named .Ar window-name already exists, it is selected (unless .Fl d is also given in which case the command does nothing). .Pp .Ar shell-command is the command to execute. If .Ar shell-command is not specified, the value of the .Ic default-command option is used. .Fl c specifies the working directory in which the new window is created. .Pp When the shell command completes, the window closes. See the .Ic remain-on-exit option to change this behaviour. .Pp .Fl e takes the form .Ql VARIABLE=value and sets an environment variable for the newly created window; it may be specified multiple times. .Pp The .Ev TERM environment variable must be set to .Ql screen or .Ql tmux for all programs running .Em inside .Nm . New windows will automatically have .Ql TERM=screen added to their environment, but care must be taken not to reset this in shell start-up files or by the .Fl e option. .Pp The .Fl P option prints information about the new window after it has been created. By default, it uses the format .Ql #{session_name}:#{window_index} but a different format may be specified with .Fl F . .Tg nextl .It Ic next-layout Op Fl t Ar target-window .D1 Pq alias: Ic nextl Move a window to the next layout and rearrange the panes to fit. .Tg next .It Xo Ic next-window .Op Fl a .Op Fl t Ar target-session .Xc .D1 Pq alias: Ic next Move to the next window in the session. If .Fl a is used, move to the next window with an alert. .Tg pipep .It Xo Ic pipe-pane .Op Fl IOo .Op Fl t Ar target-pane .Op Ar shell-command .Xc .D1 Pq alias: Ic pipep Pipe output sent by the program in .Ar target-pane to a shell command or vice versa. A pane may only be connected to one command at a time, any existing pipe is closed before .Ar shell-command is executed. The .Ar shell-command string may contain the special character sequences supported by the .Ic status-left option. If no .Ar shell-command is given, the current pipe (if any) is closed. .Pp .Fl I and .Fl O specify which of the .Ar shell-command output streams are connected to the pane: with .Fl I stdout is connected (so anything .Ar shell-command prints is written to the pane as if it were typed); with .Fl O stdin is connected (so any output in the pane is piped to .Ar shell-command ) . Both may be used together and if neither are specified, .Fl O is used. .Pp The .Fl o option only opens a new pipe if no previous pipe exists, allowing a pipe to be toggled with a single key, for example: .Bd -literal -offset indent bind-key C-p pipe-pane -o 'cat >>~/output.#I-#P' .Ed .Tg prevl .It Xo Ic previous-layout .Op Fl t Ar target-window .Xc .D1 Pq alias: Ic prevl Move to the previous layout in the session. .Tg prev .It Xo Ic previous-window .Op Fl a .Op Fl t Ar target-session .Xc .D1 Pq alias: Ic prev Move to the previous window in the session. With .Fl a , move to the previous window with an alert. .Tg renamew .It Xo Ic rename-window .Op Fl t Ar target-window .Ar new-name .Xc .D1 Pq alias: Ic renamew Rename the current window, or the window at .Ar target-window if specified, to .Ar new-name . .Tg resizep .It Xo Ic resize-pane .Op Fl DLMRTUZ .Op Fl t Ar target-pane .Op Fl x Ar width .Op Fl y Ar height .Op Ar adjustment .Xc .D1 Pq alias: Ic resizep Resize a pane, up, down, left or right by .Ar adjustment with .Fl U , .Fl D , .Fl L or .Fl R , or to an absolute size with .Fl x or .Fl y . The .Ar adjustment is given in lines or columns (the default is 1); .Fl x and .Fl y may be a given as a number of lines or columns or followed by .Ql % for a percentage of the window size (for example .Ql -x 10% ) . With .Fl Z , the active pane is toggled between zoomed (occupying the whole of the window) and unzoomed (its normal position in the layout). .Pp .Fl M begins mouse resizing (only valid if bound to a mouse key binding, see .Sx MOUSE SUPPORT ) . .Pp .Fl T trims all lines below the current cursor position and moves lines out of the history to replace them. .Tg resizew .It Xo Ic resize-window .Op Fl aADLRU .Op Fl t Ar target-window .Op Fl x Ar width .Op Fl y Ar height .Op Ar adjustment .Xc .D1 Pq alias: Ic resizew Resize a window, up, down, left or right by .Ar adjustment with .Fl U , .Fl D , .Fl L or .Fl R , or to an absolute size with .Fl x or .Fl y . The .Ar adjustment is given in lines or cells (the default is 1). .Fl A sets the size of the largest session containing the window; .Fl a the size of the smallest. This command will automatically set .Ic window-size to manual in the window options. .Tg respawnp .It Xo Ic respawn-pane .Op Fl k .Op Fl c Ar start-directory .Op Fl e Ar environment .Op Fl t Ar target-pane .Op Ar shell-command .Xc .D1 Pq alias: Ic respawnp Reactivate a pane in which the command has exited (see the .Ic remain-on-exit window option). If .Ar shell-command is not given, the command used when the pane was created or last respawned is executed. The pane must be already inactive, unless .Fl k is given, in which case any existing command is killed. .Fl c specifies a new working directory for the pane. The .Fl e option has the same meaning as for the .Ic new-window command. .Tg respawnw .It Xo Ic respawn-window .Op Fl k .Op Fl c Ar start-directory .Op Fl e Ar environment .Op Fl t Ar target-window .Op Ar shell-command .Xc .D1 Pq alias: Ic respawnw Reactivate a window in which the command has exited (see the .Ic remain-on-exit window option). If .Ar shell-command is not given, the command used when the window was created or last respawned is executed. The window must be already inactive, unless .Fl k is given, in which case any existing command is killed. .Fl c specifies a new working directory for the window. The .Fl e option has the same meaning as for the .Ic new-window command. .Tg rotatew .It Xo Ic rotate-window .Op Fl DUZ .Op Fl t Ar target-window .Xc .D1 Pq alias: Ic rotatew Rotate the positions of the panes within a window, either upward (numerically lower) with .Fl U or downward (numerically higher). .Fl Z keeps the window zoomed if it was zoomed. .Tg selectl .It Xo Ic select-layout .Op Fl Enop .Op Fl t Ar target-pane .Op Ar layout-name .Xc .D1 Pq alias: Ic selectl Choose a specific layout for a window. If .Ar layout-name is not given, the last preset layout used (if any) is reapplied. .Fl n and .Fl p are equivalent to the .Ic next-layout and .Ic previous-layout commands. .Fl o applies the last set layout if possible (undoes the most recent layout change). .Fl E spreads the current pane and any panes next to it out evenly. .Tg selectp .It Xo Ic select-pane .Op Fl DdeLlMmRUZ .Op Fl T Ar title .Op Fl t Ar target-pane .Xc .D1 Pq alias: Ic selectp Make pane .Ar target-pane the active pane in its window. If one of .Fl D , .Fl L , .Fl R , or .Fl U is used, respectively the pane below, to the left, to the right, or above the target pane is used. .Fl Z keeps the window zoomed if it was zoomed. .Fl l is the same as using the .Ic last-pane command. .Fl e enables or .Fl d disables input to the pane. .Fl T sets the pane title. .Pp .Fl m and .Fl M are used to set and clear the .Em marked pane . There is one marked pane at a time, setting a new marked pane clears the last. The marked pane is the default target for .Fl s to .Ic join-pane , .Ic move-pane , .Ic swap-pane and .Ic swap-window . .Tg selectw .It Xo Ic select-window .Op Fl lnpT .Op Fl t Ar target-window .Xc .D1 Pq alias: Ic selectw Select the window at .Ar target-window . .Fl l , .Fl n and .Fl p are equivalent to the .Ic last-window , .Ic next-window and .Ic previous-window commands. If .Fl T is given and the selected window is already the current window, the command behaves like .Ic last-window . .Tg splitw .It Xo Ic split-window .Op Fl bdfhIvPZ .Op Fl c Ar start-directory .Op Fl e Ar environment .Op Fl l Ar size .Op Fl t Ar target-pane .Op Ar shell-command .Op Fl F Ar format .Xc .D1 Pq alias: Ic splitw Create a new pane by splitting .Ar target-pane : .Fl h does a horizontal split and .Fl v a vertical split; if neither is specified, .Fl v is assumed. The .Fl l option specifies the size of the new pane in lines (for vertical split) or in columns (for horizontal split); .Ar size may be followed by .Ql % to specify a percentage of the available space. The .Fl b option causes the new pane to be created to the left of or above .Ar target-pane . The .Fl f option creates a new pane spanning the full window height (with .Fl h ) or full window width (with .Fl v ) , instead of splitting the active pane. .Fl Z zooms if the window is not zoomed, or keeps it zoomed if already zoomed. .Pp An empty .Ar shell-command ('') will create a pane with no command running in it. Output can be sent to such a pane with the .Ic display-message command. The .Fl I flag (if .Ar shell-command is not specified or empty) will create an empty pane and forward any output from stdin to it. For example: .Bd -literal -offset indent $ make 2>&1|tmux splitw -dI & .Ed .Pp All other options have the same meaning as for the .Ic new-window command. .Tg swapp .It Xo Ic swap-pane .Op Fl dDUZ .Op Fl s Ar src-pane .Op Fl t Ar dst-pane .Xc .D1 Pq alias: Ic swapp Swap two panes. If .Fl U is used and no source pane is specified with .Fl s , .Ar dst-pane is swapped with the previous pane (before it numerically); .Fl D swaps with the next pane (after it numerically). .Fl d instructs .Nm not to change the active pane and .Fl Z keeps the window zoomed if it was zoomed. .Pp If .Fl s is omitted and a marked pane is present (see .Ic select-pane .Fl m ) , the marked pane is used rather than the current pane. .Tg swapw .It Xo Ic swap-window .Op Fl d .Op Fl s Ar src-window .Op Fl t Ar dst-window .Xc .D1 Pq alias: Ic swapw This is similar to .Ic link-window , except the source and destination windows are swapped. It is an error if no window exists at .Ar src-window . If .Fl d is given, the new window does not become the current window. .Pp If .Fl s is omitted and a marked pane is present (see .Ic select-pane .Fl m ) , the window containing the marked pane is used rather than the current window. .Tg unlinkw .It Xo Ic unlink-window .Op Fl k .Op Fl t Ar target-window .Xc .D1 Pq alias: Ic unlinkw Unlink .Ar target-window . Unless .Fl k is given, a window may be unlinked only if it is linked to multiple sessions - windows may not be linked to no sessions; if .Fl k is specified and the window is linked to only one session, it is unlinked and destroyed. .El .Sh KEY BINDINGS .Nm allows a command to be bound to most keys, with or without a prefix key. When specifying keys, most represent themselves (for example .Ql A to .Ql Z ) . Ctrl keys may be prefixed with .Ql C- or .Ql ^ , Shift keys with .Ql S- and Alt (meta) with .Ql M- . In addition, the following special key names are accepted: .Em Up , .Em Down , .Em Left , .Em Right , .Em BSpace , .Em BTab , .Em DC (Delete), .Em End , .Em Enter , .Em Escape , .Em F1 to .Em F12 , .Em Home , .Em IC (Insert), .Em NPage/PageDown/PgDn , .Em PPage/PageUp/PgUp , .Em Space , and .Em Tab . Note that to bind the .Ql \&" or .Ql ' keys, quotation marks are necessary, for example: .Bd -literal -offset indent bind-key '"' split-window bind-key "'" new-window .Ed .Pp A command bound to the .Em Any key will execute for all keys which do not have a more specific binding. .Pp Commands related to key bindings are as follows: .Bl -tag -width Ds .Tg bind .It Xo Ic bind-key .Op Fl nr .Op Fl N Ar note .Op Fl T Ar key-table .Ar key command Op Ar arguments .Xc .D1 Pq alias: Ic bind Bind key .Ar key to .Ar command . Keys are bound in a key table. By default (without -T), the key is bound in the .Em prefix key table. This table is used for keys pressed after the prefix key (for example, by default .Ql c is bound to .Ic new-window in the .Em prefix table, so .Ql C-b c creates a new window). The .Em root table is used for keys pressed without the prefix key: binding .Ql c to .Ic new-window in the .Em root table (not recommended) means a plain .Ql c will create a new window. .Fl n is an alias for .Fl T Ar root . Keys may also be bound in custom key tables and the .Ic switch-client .Fl T command used to switch to them from a key binding. The .Fl r flag indicates this key may repeat, see the .Ic repeat-time option. .Fl N attaches a note to the key (shown with .Ic list-keys .Fl N ) . .Pp To view the default bindings and possible commands, see the .Ic list-keys command. .Tg lsk .It Xo Ic list-keys .Op Fl 1aN .Op Fl P Ar prefix-string Fl T Ar key-table .Op Ar key .Xc .D1 Pq alias: Ic lsk List key bindings. There are two forms: the default lists keys as .Ic bind-key commands; .Fl N lists only keys with attached notes and shows only the key and note for each key. .Pp With the default form, all key tables are listed by default. .Fl T lists only keys in .Ar key-table . .Pp With the .Fl N form, only keys in the .Em root and .Em prefix key tables are listed by default; .Fl T also lists only keys in .Ar key-table . .Fl P specifies a prefix to print before each key and .Fl 1 lists only the first matching key. .Fl a lists the command for keys that do not have a note rather than skipping them. .Tg send .It Xo Ic send-keys .Op Fl FHlMRX .Op Fl N Ar repeat-count .Op Fl t Ar target-pane .Ar key Ar ... .Xc .D1 Pq alias: Ic send Send a key or keys to a window. Each argument .Ar key is the name of the key (such as .Ql C-a or .Ql NPage ) to send; if the string is not recognised as a key, it is sent as a series of characters. All arguments are sent sequentially from first to last. If no keys are given and the command is bound to a key, then that key is used. .Pp The .Fl l flag disables key name lookup and processes the keys as literal UTF-8 characters. The .Fl H flag expects each key to be a hexadecimal number for an ASCII character. .Pp The .Fl R flag causes the terminal state to be reset. .Pp .Fl M passes through a mouse event (only valid if bound to a mouse key binding, see .Sx MOUSE SUPPORT ) . .Pp .Fl X is used to send a command into copy mode - see the .Sx WINDOWS AND PANES section. .Fl N specifies a repeat count and .Fl F expands formats in arguments where appropriate. .It Xo Ic send-prefix .Op Fl 2 .Op Fl t Ar target-pane .Xc Send the prefix key, or with .Fl 2 the secondary prefix key, to a window as if it was pressed. .Tg unbind .It Xo Ic unbind-key .Op Fl anq .Op Fl T Ar key-table .Ar key .Xc .D1 Pq alias: Ic unbind Unbind the command bound to .Ar key . .Fl n and .Fl T are the same as for .Ic bind-key . If .Fl a is present, all key bindings are removed. The .Fl q option prevents errors being returned. .El .Sh OPTIONS The appearance and behaviour of .Nm may be modified by changing the value of various options. There are four types of option: .Em server options , .Em session options , .Em window options , and .Em pane options . .Pp The .Nm server has a set of global server options which do not apply to any particular window or session or pane. These are altered with the .Ic set-option .Fl s command, or displayed with the .Ic show-options .Fl s command. .Pp In addition, each individual session may have a set of session options, and there is a separate set of global session options. Sessions which do not have a particular option configured inherit the value from the global session options. Session options are set or unset with the .Ic set-option command and may be listed with the .Ic show-options command. The available server and session options are listed under the .Ic set-option command. .Pp Similarly, a set of window options is attached to each window and a set of pane options to each pane. Pane options inherit from window options. This means any pane option may be set as a window option to apply the option to all panes in the window without the option set, for example these commands will set the background colour to red for all panes except pane 0: .Bd -literal -offset indent set -w window-style bg=red set -pt:.0 window-style bg=blue .Ed .Pp There is also a set of global window options from which any unset window or pane options are inherited. Window and pane options are altered with .Ic set-option .Fl w and .Fl p commands and displayed with .Ic show-option .Fl w and .Fl p . .Pp .Nm also supports user options which are prefixed with a .Ql \&@ . User options may have any name, so long as they are prefixed with .Ql \&@ , and be set to any string. For example: .Bd -literal -offset indent $ tmux set -wq @foo "abc123" $ tmux show -wv @foo abc123 .Ed .Pp Commands which set options are as follows: .Bl -tag -width Ds .Tg set .It Xo Ic set-option .Op Fl aFgopqsuUw .Op Fl t Ar target-pane .Ar option Ar value .Xc .D1 Pq alias: Ic set Set a pane option with .Fl p , a window option with .Fl w , a server option with .Fl s , otherwise a session option. If the option is not a user option, .Fl w or .Fl s may be unnecessary - .Nm will infer the type from the option name, assuming .Fl w for pane options. If .Fl g is given, the global session or window option is set. .Pp .Fl F expands formats in the option value. The .Fl u flag unsets an option, so a session inherits the option from the global options (or with .Fl g , restores a global option to the default). .Fl U unsets an option (like .Fl u ) but if the option is a pane option also unsets the option on any panes in the window. .Ar value depends on the option and may be a number, a string, or a flag (on, off, or omitted to toggle). .Pp The .Fl o flag prevents setting an option that is already set and the .Fl q flag suppresses errors about unknown or ambiguous options. .Pp With .Fl a , and if the option expects a string or a style, .Ar value is appended to the existing setting. For example: .Bd -literal -offset indent set -g status-left "foo" set -ag status-left "bar" .Ed .Pp Will result in .Ql foobar . And: .Bd -literal -offset indent set -g status-style "bg=red" set -ag status-style "fg=blue" .Ed .Pp Will result in a red background .Em and blue foreground. Without .Fl a , the result would be the default background and a blue foreground. .Tg show .It Xo Ic show-options .Op Fl AgHpqsvw .Op Fl t Ar target-pane .Op Ar option .Xc .D1 Pq alias: Ic show Show the pane options (or a single option if .Ar option is provided) with .Fl p , the window options with .Fl w , the server options with .Fl s , otherwise the session options. If the option is not a user option, .Fl w or .Fl s may be unnecessary - .Nm will infer the type from the option name, assuming .Fl w for pane options. Global session or window options are listed if .Fl g is used. .Fl v shows only the option value, not the name. If .Fl q is set, no error will be returned if .Ar option is unset. .Fl H includes hooks (omitted by default). .Fl A includes options inherited from a parent set of options, such options are marked with an asterisk. .El .Pp Available server options are: .Bl -tag -width Ds .It Ic backspace Ar key Set the key sent by .Nm for backspace. .It Ic buffer-limit Ar number Set the number of buffers; as new buffers are added to the top of the stack, old ones are removed from the bottom if necessary to maintain this maximum length. .It Xo Ic command-alias[] .Ar name=value .Xc This is an array of custom aliases for commands. If an unknown command matches .Ar name , it is replaced with .Ar value . For example, after: .Pp .Dl set -s command-alias[100] zoom='resize-pane -Z' .Pp Using: .Pp .Dl zoom -t:.1 .Pp Is equivalent to: .Pp .Dl resize-pane -Z -t:.1 .Pp Note that aliases are expanded when a command is parsed rather than when it is executed, so binding an alias with .Ic bind-key will bind the expanded form. .It Ic default-terminal Ar terminal Set the default terminal for new windows created in this session - the default value of the .Ev TERM environment variable. For .Nm to work correctly, this .Em must be set to .Ql screen , .Ql tmux or a derivative of them. .It Ic copy-command Ar shell-command Give the command to pipe to if the .Ic copy-pipe copy mode command is used without arguments. .It Ic escape-time Ar time Set the time in milliseconds for which .Nm waits after an escape is input to determine if it is part of a function or meta key sequences. The default is 500 milliseconds. .It Ic editor Ar shell-command Set the command used when .Nm runs an editor. .It Xo Ic exit-empty .Op Ic on | off .Xc If enabled (the default), the server will exit when there are no active sessions. .It Xo Ic exit-unattached .Op Ic on | off .Xc If enabled, the server will exit when there are no attached clients. .It Xo Ic extended-keys .Op Ic on | off | always .Xc When .Ic on or .Ic always , the escape sequence to enable extended keys is sent to the terminal, if .Nm knows that it is supported. .Nm always recognises extended keys itself. If this option is .Ic on , .Nm will only forward extended keys to applications when they request them; if .Ic always , .Nm will always forward the keys. .It Xo Ic focus-events .Op Ic on | off .Xc When enabled, focus events are requested from the terminal if supported and passed through to applications running in .Nm . Attached clients should be detached and attached again after changing this option. .It Ic history-file Ar path If not empty, a file to which .Nm will write command prompt history on exit and load it from on start. .It Ic message-limit Ar number Set the number of error or information messages to save in the message log for each client. .It Ic prompt-history-limit Ar number Set the number of history items to save in the history file for each type of command prompt. .It Xo Ic set-clipboard .Op Ic on | external | off .Xc Attempt to set the terminal clipboard content using the .Xr xterm 1 escape sequence, if there is an .Em \&Ms entry in the .Xr terminfo 5 description (see the .Sx TERMINFO EXTENSIONS section). .Pp If set to .Ic on , .Nm will both accept the escape sequence to create a buffer and attempt to set the terminal clipboard. If set to .Ic external , .Nm will attempt to set the terminal clipboard but ignore attempts by applications to set .Nm buffers. If .Ic off , .Nm will neither accept the clipboard escape sequence nor attempt to set the clipboard. .Pp Note that this feature needs to be enabled in .Xr xterm 1 by setting the resource: .Bd -literal -offset indent disallowedWindowOps: 20,21,SetXprop .Ed .Pp Or changing this property from the .Xr xterm 1 interactive menu when required. .It Ic terminal-features[] Ar string Set terminal features for terminal types read from .Xr terminfo 5 . .Nm has a set of named terminal features. Each will apply appropriate changes to the .Xr terminfo 5 entry in use. .Pp .Nm can detect features for a few common terminals; this option can be used to easily tell tmux about features supported by terminals it cannot detect. The .Ic terminal-overrides option allows individual .Xr terminfo 5 capabilities to be set instead, .Ic terminal-features is intended for classes of functionality supported in a standard way but not reported by .Xr terminfo 5 . Care must be taken to configure this only with features the terminal actually supports. .Pp This is an array option where each entry is a colon-separated string made up of a terminal type pattern (matched using .Xr fnmatch 3 ) followed by a list of terminal features. The available features are: .Bl -tag -width Ds .It 256 Supports 256 colours with the SGR escape sequences. .It clipboard Allows setting the system clipboard. .It ccolour Allows setting the cursor colour. .It cstyle Allows setting the cursor style. .It extkeys Supports extended keys. .It focus Supports focus reporting. .It margins Supports DECSLRM margins. .It mouse Supports .Xr xterm 1 mouse sequences. .It overline Supports the overline SGR attribute. .It rectfill Supports the DECFRA rectangle fill escape sequence. .It RGB Supports RGB colour with the SGR escape sequences. .It strikethrough Supports the strikethrough SGR escape sequence. .It sync Supports synchronized updates. .It title Supports .Xr xterm 1 title setting. .It usstyle Allows underscore style and colour to be set. .El .It Ic terminal-overrides[] Ar string Allow terminal descriptions read using .Xr terminfo 5 to be overridden. Each entry is a colon-separated string made up of a terminal type pattern (matched using .Xr fnmatch 3 ) and a set of .Em name=value entries. .Pp For example, to set the .Ql clear .Xr terminfo 5 entry to .Ql \ee[H\ee[2J for all terminal types matching .Ql rxvt* : .Pp .Dl "rxvt*:clear=\ee[H\ee[2J" .Pp The terminal entry value is passed through .Xr strunvis 3 before interpretation. .It Ic user-keys[] Ar key Set list of user-defined key escape sequences. Each item is associated with a key named .Ql User0 , .Ql User1 , and so on. .Pp For example: .Bd -literal -offset indent set -s user-keys[0] "\ee[5;30012~" bind User0 resize-pane -L 3 .Ed .El .Pp Available session options are: .Bl -tag -width Ds .It Xo Ic activity-action .Op Ic any | none | current | other .Xc Set action on window activity when .Ic monitor-activity is on. .Ic any means activity in any window linked to a session causes a bell or message (depending on .Ic visual-activity ) in the current window of that session, .Ic none means all activity is ignored (equivalent to .Ic monitor-activity being off), .Ic current means only activity in windows other than the current window are ignored and .Ic other means activity in the current window is ignored but not those in other windows. .It Ic assume-paste-time Ar milliseconds If keys are entered faster than one in .Ar milliseconds , they are assumed to have been pasted rather than typed and .Nm key bindings are not processed. The default is one millisecond and zero disables. .It Ic base-index Ar index Set the base index from which an unused index should be searched when a new window is created. The default is zero. .It Xo Ic bell-action .Op Ic any | none | current | other .Xc Set action on a bell in a window when .Ic monitor-bell is on. The values are the same as those for .Ic activity-action . .It Ic default-command Ar shell-command Set the command used for new windows (if not specified when the window is created) to .Ar shell-command , which may be any .Xr sh 1 command. The default is an empty string, which instructs .Nm to create a login shell using the value of the .Ic default-shell option. .It Ic default-shell Ar path Specify the default shell. This is used as the login shell for new windows when the .Ic default-command option is set to empty, and must be the full path of the executable. When started .Nm tries to set a default value from the first suitable of the .Ev SHELL environment variable, the shell returned by .Xr getpwuid 3 , or .Pa /bin/sh . This option should be configured when .Nm is used as a login shell. .It Ic default-size Ar XxY Set the default size of new windows when the .Ic window-size option is set to manual or when a session is created with .Ic new-session .Fl d . The value is the width and height separated by an .Ql x character. The default is 80x24. .It Xo Ic destroy-unattached .Op Ic on | off .Xc If enabled and the session is no longer attached to any clients, it is destroyed. .It Xo Ic detach-on-destroy .Op Ic off | on | no-detached .Xc If on (the default), the client is detached when the session it is attached to is destroyed. If off, the client is switched to the most recently active of the remaining sessions. If .Ic no-detached , the client is detached only if there are no detached sessions; if detached sessions exist, the client is switched to the most recently active. .It Ic display-panes-active-colour Ar colour Set the colour used by the .Ic display-panes command to show the indicator for the active pane. .It Ic display-panes-colour Ar colour Set the colour used by the .Ic display-panes command to show the indicators for inactive panes. .It Ic display-panes-time Ar time Set the time in milliseconds for which the indicators shown by the .Ic display-panes command appear. .It Ic display-time Ar time Set the amount of time for which status line messages and other on-screen indicators are displayed. If set to 0, messages and indicators are displayed until a key is pressed. .Ar time is in milliseconds. .It Ic history-limit Ar lines Set the maximum number of lines held in window history. This setting applies only to new windows - existing window histories are not resized and retain the limit at the point they were created. .It Ic key-table Ar key-table Set the default key table to .Ar key-table instead of .Em root . .It Ic lock-after-time Ar number Lock the session (like the .Ic lock-session command) after .Ar number seconds of inactivity. The default is not to lock (set to 0). .It Ic lock-command Ar shell-command Command to run when locking each client. The default is to run .Xr lock 1 with .Fl np . .It Ic message-command-style Ar style Set status line message command style. This is used for the command prompt with .Xr vi 1 keys when in command mode. For how to specify .Ar style , see the .Sx STYLES section. .It Ic message-style Ar style Set status line message style. This is used for messages and for the command prompt. For how to specify .Ar style , see the .Sx STYLES section. .It Xo Ic mouse .Op Ic on | off .Xc If on, .Nm captures the mouse and allows mouse events to be bound as key bindings. See the .Sx MOUSE SUPPORT section for details. .It Ic prefix Ar key Set the key accepted as a prefix key. In addition to the standard keys described under .Sx KEY BINDINGS , .Ic prefix can be set to the special key .Ql None to set no prefix. .It Ic prefix2 Ar key Set a secondary key accepted as a prefix key. Like .Ic prefix , .Ic prefix2 can be set to .Ql None . .It Xo Ic renumber-windows .Op Ic on | off .Xc If on, when a window is closed in a session, automatically renumber the other windows in numerical order. This respects the .Ic base-index option if it has been set. If off, do not renumber the windows. .It Ic repeat-time Ar time Allow multiple commands to be entered without pressing the prefix-key again in the specified .Ar time milliseconds (the default is 500). Whether a key repeats may be set when it is bound using the .Fl r flag to .Ic bind-key . Repeat is enabled for the default keys bound to the .Ic resize-pane command. .It Xo Ic set-titles .Op Ic on | off .Xc Attempt to set the client terminal title using the .Em tsl and .Em fsl .Xr terminfo 5 entries if they exist. .Nm automatically sets these to the \ee]0;...\e007 sequence if the terminal appears to be .Xr xterm 1 . This option is off by default. .It Ic set-titles-string Ar string String used to set the client terminal title if .Ic set-titles is on. Formats are expanded, see the .Sx FORMATS section. .It Xo Ic silence-action .Op Ic any | none | current | other .Xc Set action on window silence when .Ic monitor-silence is on. The values are the same as those for .Ic activity-action . .It Xo Ic status .Op Ic off | on | 2 | 3 | 4 | 5 .Xc Show or hide the status line or specify its size. Using .Ic on gives a status line one row in height; .Ic 2 , .Ic 3 , .Ic 4 or .Ic 5 more rows. .It Ic status-format[] Ar format Specify the format to be used for each line of the status line. The default builds the top status line from the various individual status options below. .It Ic status-interval Ar interval Update the status line every .Ar interval seconds. By default, updates will occur every 15 seconds. A setting of zero disables redrawing at interval. .It Xo Ic status-justify .Op Ic left | centre | right | absolute-centre .Xc Set the position of the window list in the status line: left, centre or right. centre puts the window list in the relative centre of the available free space; absolute-centre uses the centre of the entire horizontal space. .It Xo Ic status-keys .Op Ic vi | emacs .Xc Use vi or emacs-style key bindings in the status line, for example at the command prompt. The default is emacs, unless the .Ev VISUAL or .Ev EDITOR environment variables are set and contain the string .Ql vi . .It Ic status-left Ar string Display .Ar string (by default the session name) to the left of the status line. .Ar string will be passed through .Xr strftime 3 . Also see the .Sx FORMATS and .Sx STYLES sections. .Pp For details on how the names and titles can be set see the .Sx "NAMES AND TITLES" section. .Pp Examples are: .Bd -literal -offset indent #(sysctl vm.loadavg) #[fg=yellow,bold]#(apm -l)%%#[default] [#S] .Ed .Pp The default is .Ql "[#S] " . .It Ic status-left-length Ar length Set the maximum .Ar length of the left component of the status line. The default is 10. .It Ic status-left-style Ar style Set the style of the left part of the status line. For how to specify .Ar style , see the .Sx STYLES section. .It Xo Ic status-position .Op Ic top | bottom .Xc Set the position of the status line. .It Ic status-right Ar string Display .Ar string to the right of the status line. By default, the current pane title in double quotes, the date and the time are shown. As with .Ic status-left , .Ar string will be passed to .Xr strftime 3 and character pairs are replaced. .It Ic status-right-length Ar length Set the maximum .Ar length of the right component of the status line. The default is 40. .It Ic status-right-style Ar style Set the style of the right part of the status line. For how to specify .Ar style , see the .Sx STYLES section. .It Ic status-style Ar style Set status line style. For how to specify .Ar style , see the .Sx STYLES section. .It Ic update-environment[] Ar variable Set list of environment variables to be copied into the session environment when a new session is created or an existing session is attached. Any variables that do not exist in the source environment are set to be removed from the session environment (as if .Fl r was given to the .Ic set-environment command). .It Xo Ic visual-activity .Op Ic on | off | both .Xc If on, display a message instead of sending a bell when activity occurs in a window for which the .Ic monitor-activity window option is enabled. If set to both, a bell and a message are produced. .It Xo Ic visual-bell .Op Ic on | off | both .Xc If on, a message is shown on a bell in a window for which the .Ic monitor-bell window option is enabled instead of it being passed through to the terminal (which normally makes a sound). If set to both, a bell and a message are produced. Also see the .Ic bell-action option. .It Xo Ic visual-silence .Op Ic on | off | both .Xc If .Ic monitor-silence is enabled, prints a message after the interval has expired on a given window instead of sending a bell. If set to both, a bell and a message are produced. .It Ic word-separators Ar string Sets the session's conception of what characters are considered word separators, for the purposes of the next and previous word commands in copy mode. .El .Pp Available window options are: .Pp .Bl -tag -width Ds -compact .It Xo Ic aggressive-resize .Op Ic on | off .Xc Aggressively resize the chosen window. This means that .Nm will resize the window to the size of the smallest or largest session (see the .Ic window-size option) for which it is the current window, rather than the session to which it is attached. The window may resize when the current window is changed on another session; this option is good for full-screen programs which support .Dv SIGWINCH and poor for interactive programs such as shells. .Pp .It Xo Ic automatic-rename .Op Ic on | off .Xc Control automatic window renaming. When this setting is enabled, .Nm will rename the window automatically using the format specified by .Ic automatic-rename-format . This flag is automatically disabled for an individual window when a name is specified at creation with .Ic new-window or .Ic new-session , or later with .Ic rename-window , or with a terminal escape sequence. It may be switched off globally with: .Bd -literal -offset indent set-option -wg automatic-rename off .Ed .Pp .It Ic automatic-rename-format Ar format The format (see .Sx FORMATS ) used when the .Ic automatic-rename option is enabled. .Pp .It Ic clock-mode-colour Ar colour Set clock colour. .Pp .It Xo Ic clock-mode-style .Op Ic 12 | 24 .Xc Set clock hour format. .Pp .It Ic main-pane-height Ar height .It Ic main-pane-width Ar width Set the width or height of the main (left or top) pane in the .Ic main-horizontal or .Ic main-vertical layouts. If suffixed by .Ql % , this is a percentage of the window size. .Pp .It Ic copy-mode-match-style Ar style Set the style of search matches in copy mode. For how to specify .Ar style , see the .Sx STYLES section. .Pp .It Ic copy-mode-mark-style Ar style Set the style of the line containing the mark in copy mode. For how to specify .Ar style , see the .Sx STYLES section. .Pp .It Ic copy-mode-current-match-style Ar style Set the style of the current search match in copy mode. For how to specify .Ar style , see the .Sx STYLES section. .Pp .It Xo Ic mode-keys .Op Ic vi | emacs .Xc Use vi or emacs-style key bindings in copy mode. The default is emacs, unless .Ev VISUAL or .Ev EDITOR contains .Ql vi . .Pp .It Ic mode-style Ar style Set window modes style. For how to specify .Ar style , see the .Sx STYLES section. .Pp .It Xo Ic monitor-activity .Op Ic on | off .Xc Monitor for activity in the window. Windows with activity are highlighted in the status line. .Pp .It Xo Ic monitor-bell .Op Ic on | off .Xc Monitor for a bell in the window. Windows with a bell are highlighted in the status line. .Pp .It Xo Ic monitor-silence .Op Ic interval .Xc Monitor for silence (no activity) in the window within .Ic interval seconds. Windows that have been silent for the interval are highlighted in the status line. An interval of zero disables the monitoring. .Pp .It Ic other-pane-height Ar height Set the height of the other panes (not the main pane) in the .Ic main-horizontal layout. If this option is set to 0 (the default), it will have no effect. If both the .Ic main-pane-height and .Ic other-pane-height options are set, the main pane will grow taller to make the other panes the specified height, but will never shrink to do so. If suffixed by .Ql % , this is a percentage of the window size. .Pp .It Ic other-pane-width Ar width Like .Ic other-pane-height , but set the width of other panes in the .Ic main-vertical layout. .Pp .It Ic pane-active-border-style Ar style Set the pane border style for the currently active pane. For how to specify .Ar style , see the .Sx STYLES section. Attributes are ignored. .Pp .It Ic pane-base-index Ar index Like .Ic base-index , but set the starting index for pane numbers. .Pp .It Ic pane-border-format Ar format Set the text shown in pane border status lines. .Pp .It Xo Ic pane-border-indicators .Op Ic off | colour | arrows | both .Xc Indicate active pane by colouring only half of the border in windows with exactly two panes, by displaying arrow markers, by drawing both or neither. .Pp .It Ic pane-border-lines Ar type Set the type of characters used for drawing pane borders. .Ar type may be one of: .Bl -tag -width Ds .It single single lines using ACS or UTF-8 characters .It double double lines using UTF-8 characters .It heavy heavy lines using UTF-8 characters .It simple simple ASCII characters .It number the pane number .El .Pp .Ql double and .Ql heavy will fall back to standard ACS line drawing when UTF-8 is not supported. .Pp .It Xo Ic pane-border-status .Op Ic off | top | bottom .Xc Turn pane border status lines off or set their position. .Pp .It Ic pane-border-style Ar style Set the pane border style for panes aside from the active pane. For how to specify .Ar style , see the .Sx STYLES section. Attributes are ignored. .Pp .It Ic popup-style Ar style Set the popup style. For how to specify .Ar style , see the .Sx STYLES section. Attributes are ignored. .Pp .It Ic popup-border-style Ar style Set the popup border style. For how to specify .Ar style , see the .Sx STYLES section. Attributes are ignored. .Pp .It Ic popup-border-lines Ar type Set the type of characters used for drawing popup borders. .Ar type may be one of: .Bl -tag -width Ds .It single single lines using ACS or UTF-8 characters (default) .It rounded variation of single with rounded corners using UTF-8 characters .It double double lines using UTF-8 characters .It heavy heavy lines using UTF-8 characters .It simple simple ASCII characters .It padded simple ASCII space character .It none no border .El .Pp .Ql double and .Ql heavy will fall back to standard ACS line drawing when UTF-8 is not supported. .Pp .It Ic window-status-activity-style Ar style Set status line style for windows with an activity alert. For how to specify .Ar style , see the .Sx STYLES section. .Pp .It Ic window-status-bell-style Ar style Set status line style for windows with a bell alert. For how to specify .Ar style , see the .Sx STYLES section. .Pp .It Ic window-status-current-format Ar string Like .Ar window-status-format , but is the format used when the window is the current window. .Pp .It Ic window-status-current-style Ar style Set status line style for the currently active window. For how to specify .Ar style , see the .Sx STYLES section. .Pp .It Ic window-status-format Ar string Set the format in which the window is displayed in the status line window list. See the .Sx FORMATS and .Sx STYLES sections. .Pp .It Ic window-status-last-style Ar style Set status line style for the last active window. For how to specify .Ar style , see the .Sx STYLES section. .Pp .It Ic window-status-separator Ar string Sets the separator drawn between windows in the status line. The default is a single space character. .Pp .It Ic window-status-style Ar style Set status line style for a single window. For how to specify .Ar style , see the .Sx STYLES section. .Pp .It Xo Ic window-size .Ar largest | Ar smallest | Ar manual | Ar latest .Xc Configure how .Nm determines the window size. If set to .Ar largest , the size of the largest attached session is used; if .Ar smallest , the size of the smallest. If .Ar manual , the size of a new window is set from the .Ic default-size option and windows are resized automatically. With .Ar latest , .Nm uses the size of the client that had the most recent activity. See also the .Ic resize-window command and the .Ic aggressive-resize option. .Pp .It Xo Ic wrap-search .Op Ic on | off .Xc If this option is set, searches will wrap around the end of the pane contents. The default is on. .El .Pp Available pane options are: .Pp .Bl -tag -width Ds -compact .It Xo Ic allow-rename .Op Ic on | off .Xc Allow programs in the pane to change the window name using a terminal escape sequence (\eek...\ee\e\e). .Pp .It Xo Ic alternate-screen .Op Ic on | off .Xc This option configures whether programs running inside the pane may use the terminal alternate screen feature, which allows the .Em smcup and .Em rmcup .Xr terminfo 5 capabilities. The alternate screen feature preserves the contents of the window when an interactive application starts and restores it on exit, so that any output visible before the application starts reappears unchanged after it exits. .Pp .It Ic cursor-colour Ar colour Set the colour of the cursor. .Pp .It Ic pane-colours[] Ar colour The default colour palette. Each entry in the array defines the colour .Nm uses when the colour with that index is requested. The index may be from zero to 255. .Pp .It Ic cursor-style Ar style Set the style of the cursor. Available styles are: .Ic default , .Ic blinking-block , .Ic block , .Ic blinking-underline , .Ic underline , .Ic blinking-bar , .Ic bar . .Pp .It Xo Ic remain-on-exit .Op Ic on | off | failed .Xc A pane with this flag set is not destroyed when the program running in it exits. If set to .Ic failed , then only when the program exit status is not zero. The pane may be reactivated with the .Ic respawn-pane command. .Pp .It Xo Ic synchronize-panes .Op Ic on | off .Xc Duplicate input to all other panes in the same window where this option is also on (only for panes that are not in any mode). .Pp .It Ic window-active-style Ar style Set the pane style when it is the active pane. For how to specify .Ar style , see the .Sx STYLES section. .Pp .It Ic window-style Ar style Set the pane style. For how to specify .Ar style , see the .Sx STYLES section. .El .Sh HOOKS .Nm allows commands to run on various triggers, called .Em hooks . Most .Nm commands have an .Em after hook and there are a number of hooks not associated with commands. .Pp Hooks are stored as array options, members of the array are executed in order when the hook is triggered. Like options different hooks may be global or belong to a session, window or pane. Hooks may be configured with the .Ic set-hook or .Ic set-option commands and displayed with .Ic show-hooks or .Ic show-options .Fl H . The following two commands are equivalent: .Bd -literal -offset indent. set-hook -g pane-mode-changed[42] 'set -g status-left-style bg=red' set-option -g pane-mode-changed[42] 'set -g status-left-style bg=red' .Ed .Pp Setting a hook without specifying an array index clears the hook and sets the first member of the array. .Pp A command's after hook is run after it completes, except when the command is run as part of a hook itself. They are named with an .Ql after- prefix. For example, the following command adds a hook to select the even-vertical layout after every .Ic split-window : .Bd -literal -offset indent set-hook -g after-split-window "selectl even-vertical" .Ed .Pp All the notifications listed in the .Sx CONTROL MODE section are hooks (without any arguments), except .Ic %exit . The following additional hooks are available: .Bl -tag -width "XXXXXXXXXXXXXXXXXXXXXX" .It alert-activity Run when a window has activity. See .Ic monitor-activity . .It alert-bell Run when a window has received a bell. See .Ic monitor-bell . .It alert-silence Run when a window has been silent. See .Ic monitor-silence . .It client-active Run when a client becomes the latest active client of its session. .It client-attached Run when a client is attached. .It client-detached Run when a client is detached .It client-focus-in Run when focus enters a client .It client-focus-out Run when focus exits a client .It client-resized Run when a client is resized. .It client-session-changed Run when a client's attached session is changed. .It pane-died Run when the program running in a pane exits, but .Ic remain-on-exit is on so the pane has not closed. .It pane-exited Run when the program running in a pane exits. .It pane-focus-in Run when the focus enters a pane, if the .Ic focus-events option is on. .It pane-focus-out Run when the focus exits a pane, if the .Ic focus-events option is on. .It pane-set-clipboard Run when the terminal clipboard is set using the .Xr xterm 1 escape sequence. .It session-created Run when a new session created. .It session-closed Run when a session closed. .It session-renamed Run when a session is renamed. .It window-linked Run when a window is linked into a session. .It window-renamed Run when a window is renamed. .It window-unlinked Run when a window is unlinked from a session. .El .Pp Hooks are managed with these commands: .Bl -tag -width Ds .It Xo Ic set-hook .Op Fl agpRuw .Op Fl t Ar target-pane .Ar hook-name .Ar command .Xc Without .Fl R , sets (or with .Fl u unsets) hook .Ar hook-name to .Ar command . The flags are the same as for .Ic set-option . .Pp With .Fl R , run .Ar hook-name immediately. .It Xo Ic show-hooks .Op Fl gpw .Op Fl t Ar target-pane .Xc Shows hooks. The flags are the same as for .Ic show-options . .El .Sh MOUSE SUPPORT If the .Ic mouse option is on (the default is off), .Nm allows mouse events to be bound as keys. The name of each key is made up of a mouse event (such as .Ql MouseUp1 ) and a location suffix, one of the following: .Bl -column "XXXXXXXXXXXXX" -offset indent .It Li "Pane" Ta "the contents of a pane" .It Li "Border" Ta "a pane border" .It Li "Status" Ta "the status line window list" .It Li "StatusLeft" Ta "the left part of the status line" .It Li "StatusRight" Ta "the right part of the status line" .It Li "StatusDefault" Ta "any other part of the status line" .El .Pp The following mouse events are available: .Bl -column "MouseDown1" "MouseDrag1" "WheelDown" -offset indent .It Li "WheelUp" Ta "WheelDown" Ta "" .It Li "MouseDown1" Ta "MouseUp1" Ta "MouseDrag1" Ta "MouseDragEnd1" .It Li "MouseDown2" Ta "MouseUp2" Ta "MouseDrag2" Ta "MouseDragEnd2" .It Li "MouseDown3" Ta "MouseUp3" Ta "MouseDrag3" Ta "MouseDragEnd3" .It Li "SecondClick1" Ta "SecondClick2" Ta "SecondClick3" .It Li "DoubleClick1" Ta "DoubleClick2" Ta "DoubleClick3" .It Li "TripleClick1" Ta "TripleClick2" Ta "TripleClick3" .El .Pp The .Ql SecondClick events are fired for the second click of a double click, even if there may be a third click which will fire .Ql TripleClick instead of .Ql DoubleClick . .Pp Each should be suffixed with a location, for example .Ql MouseDown1Status . .Pp The special token .Ql {mouse} or .Ql = may be used as .Ar target-window or .Ar target-pane in commands bound to mouse key bindings. It resolves to the window or pane over which the mouse event took place (for example, the window in the status line over which button 1 was released for a .Ql MouseUp1Status binding, or the pane over which the wheel was scrolled for a .Ql WheelDownPane binding). .Pp The .Ic send-keys .Fl M flag may be used to forward a mouse event to a pane. .Pp The default key bindings allow the mouse to be used to select and resize panes, to copy text and to change window using the status line. These take effect if the .Ic mouse option is turned on. .Sh FORMATS Certain commands accept the .Fl F flag with a .Ar format argument. This is a string which controls the output format of the command. Format variables are enclosed in .Ql #{ and .Ql } , for example .Ql #{session_name} . The possible variables are listed in the table below, or the name of a .Nm option may be used for an option's value. Some variables have a shorter alias such as .Ql #S ; .Ql ## is replaced by a single .Ql # , .Ql #, by a .Ql \&, and .Ql #} by a .Ql } . .Pp Conditionals are available by prefixing with .Ql \&? and separating two alternatives with a comma; if the specified variable exists and is not zero, the first alternative is chosen, otherwise the second is used. For example .Ql #{?session_attached,attached,not attached} will include the string .Ql attached if the session is attached and the string .Ql not attached if it is unattached, or .Ql #{?automatic-rename,yes,no} will include .Ql yes if .Ic automatic-rename is enabled, or .Ql no if not. Conditionals can be nested arbitrarily. Inside a conditional, .Ql \&, and .Ql } must be escaped as .Ql #, and .Ql #} , unless they are part of a .Ql #{...} replacement. For example: .Bd -literal -offset indent #{?pane_in_mode,#[fg=white#,bg=red],#[fg=red#,bg=white]}#W . .Ed .Pp String comparisons may be expressed by prefixing two comma-separated alternatives by .Ql == , .Ql != , .Ql < , .Ql > , .Ql <= or .Ql >= and a colon. For example .Ql #{==:#{host},myhost} will be replaced by .Ql 1 if running on .Ql myhost , otherwise by .Ql 0 . .Ql || and .Ql && evaluate to true if either or both of two comma-separated alternatives are true, for example .Ql #{||:#{pane_in_mode},#{alternate_on}} . .Pp An .Ql m specifies an .Xr fnmatch 3 or regular expression comparison. The first argument is the pattern and the second the string to compare. An optional argument specifies flags: .Ql r means the pattern is a regular expression instead of the default .Xr fnmatch 3 pattern, and .Ql i means to ignore case. For example: .Ql #{m:*foo*,#{host}} or .Ql #{m/ri:^A,MYVAR} . A .Ql C performs a search for an .Xr fnmatch 3 pattern or regular expression in the pane content and evaluates to zero if not found, or a line number if found. Like .Ql m , an .Ql r flag means search for a regular expression and .Ql i ignores case. For example: .Ql #{C/r:^Start} .Pp Numeric operators may be performed by prefixing two comma-separated alternatives with an .Ql e and an operator. An optional .Ql f flag may be given after the operator to use floating point numbers, otherwise integers are used. This may be followed by a number giving the number of decimal places to use for the result. The available operators are: addition .Ql + , subtraction .Ql - , multiplication .Ql * , division .Ql / , modulus .Ql m or .Ql % (note that .Ql % must be escaped as .Ql %% in formats which are also expanded by .Xr strftime 3 ) and numeric comparison operators .Ql == , .Ql != , .Ql < , .Ql <= , .Ql > and .Ql >= . For example, .Ql #{e|*|f|4:5.5,3} multiplies 5.5 by 3 for a result with four decimal places and .Ql #{e|%%:7,3} returns the modulus of 7 and 3. .Ql a replaces a numeric argument by its ASCII equivalent, so .Ql #{a:98} results in .Ql b . .Ql c replaces a .Nm colour by its six-digit hexadecimal RGB value. .Pp A limit may be placed on the length of the resultant string by prefixing it by an .Ql = , a number and a colon. Positive numbers count from the start of the string and negative from the end, so .Ql #{=5:pane_title} will include at most the first five characters of the pane title, or .Ql #{=-5:pane_title} the last five characters. A suffix or prefix may be given as a second argument - if provided then it is appended or prepended to the string if the length has been trimmed, for example .Ql #{=/5/...:pane_title} will append .Ql ... if the pane title is more than five characters. Similarly, .Ql p pads the string to a given width, for example .Ql #{p10:pane_title} will result in a width of at least 10 characters. A positive width pads on the left, a negative on the right. .Ql n expands to the length of the variable and .Ql w to its width when displayed, for example .Ql #{n:window_name} . .Pp Prefixing a time variable with .Ql t:\& will convert it to a string, so if .Ql #{window_activity} gives .Ql 1445765102 , .Ql #{t:window_activity} gives .Ql Sun Oct 25 09:25:02 2015 . Adding .Ql p ( .Ql `t/p` ) will use shorter but less accurate time format for times in the past. A custom format may be given using an .Ql f suffix (note that .Ql % must be escaped as .Ql %% if the format is separately being passed through .Xr strftime 3 , for example in the .Ic status-left option): .Ql #{t/f/%%H#:%%M:window_activity} , see .Xr strftime 3 . .Pp The .Ql b:\& and .Ql d:\& prefixes are .Xr basename 3 and .Xr dirname 3 of the variable respectively. .Ql q:\& will escape .Xr sh 1 special characters or with a .Ql h suffix, escape hash characters (so .Ql # becomes .Ql ## ) . .Ql E:\& will expand the format twice, for example .Ql #{E:status-left} is the result of expanding the content of the .Ic status-left option rather than the option itself. .Ql T:\& is like .Ql E:\& but also expands .Xr strftime 3 specifiers. .Ql S:\& , .Ql W:\& or .Ql P:\& will loop over each session, window or pane and insert the format once for each. For windows and panes, two comma-separated formats may be given: the second is used for the current window or active pane. For example, to get a list of windows formatted like the status line: .Bd -literal -offset indent #{W:#{E:window-status-format} ,#{E:window-status-current-format} } .Ed .Pp .Ql N:\& checks if a window (without any suffix or with the .Ql w suffix) or a session (with the .Ql s suffix) name exists, for example .Ql `N/w:foo` is replaced with 1 if a window named .Ql foo exists. .Pp A prefix of the form .Ql s/foo/bar/:\& will substitute .Ql foo with .Ql bar throughout. The first argument may be an extended regular expression and a final argument may be .Ql i to ignore case, for example .Ql s/a(.)/\e1x/i:\& would change .Ql abABab into .Ql bxBxbx . .Pp In addition, the last line of a shell command's output may be inserted using .Ql #() . For example, .Ql #(uptime) will insert the system's uptime. When constructing formats, .Nm does not wait for .Ql #() commands to finish; instead, the previous result from running the same command is used, or a placeholder if the command has not been run before. If the command hasn't exited, the most recent line of output will be used, but the status line will not be updated more than once a second. Commands are executed using .Pa /bin/sh and with the .Nm global environment set (see the .Sx GLOBAL AND SESSION ENVIRONMENT section). .Pp An .Ql l specifies that a string should be interpreted literally and not expanded. For example .Ql #{l:#{?pane_in_mode,yes,no}} will be replaced by .Ql #{?pane_in_mode,yes,no} . .Pp The following variables are available, where appropriate: .Bl -column "XXXXXXXXXXXXXXXXXXX" "XXXXX" .It Sy "Variable name" Ta Sy "Alias" Ta Sy "Replaced with" .It Li "active_window_index" Ta "" Ta "Index of active window in session" .It Li "alternate_on" Ta "" Ta "1 if pane is in alternate screen" .It Li "alternate_saved_x" Ta "" Ta "Saved cursor X in alternate screen" .It Li "alternate_saved_y" Ta "" Ta "Saved cursor Y in alternate screen" .It Li "buffer_created" Ta "" Ta "Time buffer created" .It Li "buffer_name" Ta "" Ta "Name of buffer" .It Li "buffer_sample" Ta "" Ta "Sample of start of buffer" .It Li "buffer_size" Ta "" Ta "Size of the specified buffer in bytes" .It Li "client_activity" Ta "" Ta "Time client last had activity" .It Li "client_cell_height" Ta "" Ta "Height of each client cell in pixels" .It Li "client_cell_width" Ta "" Ta "Width of each client cell in pixels" .It Li "client_control_mode" Ta "" Ta "1 if client is in control mode" .It Li "client_created" Ta "" Ta "Time client created" .It Li "client_discarded" Ta "" Ta "Bytes discarded when client behind" .It Li "client_flags" Ta "" Ta "List of client flags" .It Li "client_height" Ta "" Ta "Height of client" .It Li "client_key_table" Ta "" Ta "Current key table" .It Li "client_last_session" Ta "" Ta "Name of the client's last session" .It Li "client_name" Ta "" Ta "Name of client" .It Li "client_pid" Ta "" Ta "PID of client process" .It Li "client_prefix" Ta "" Ta "1 if prefix key has been pressed" .It Li "client_readonly" Ta "" Ta "1 if client is readonly" .It Li "client_session" Ta "" Ta "Name of the client's session" .It Li "client_termfeatures" Ta "" Ta "Terminal features of client, if any" .It Li "client_termname" Ta "" Ta "Terminal name of client" .It Li "client_termtype" Ta "" Ta "Terminal type of client, if available" .It Li "client_tty" Ta "" Ta "Pseudo terminal of client" .It Li "client_utf8" Ta "" Ta "1 if client supports UTF-8" .It Li "client_width" Ta "" Ta "Width of client" .It Li "client_written" Ta "" Ta "Bytes written to client" .It Li "command" Ta "" Ta "Name of command in use, if any" .It Li "command_list_alias" Ta "" Ta "Command alias if listing commands" .It Li "command_list_name" Ta "" Ta "Command name if listing commands" .It Li "command_list_usage" Ta "" Ta "Command usage if listing commands" .It Li "config_files" Ta "" Ta "List of configuration files loaded" .It Li "copy_cursor_line" Ta "" Ta "Line the cursor is on in copy mode" .It Li "copy_cursor_word" Ta "" Ta "Word under cursor in copy mode" .It Li "copy_cursor_x" Ta "" Ta "Cursor X position in copy mode" .It Li "copy_cursor_y" Ta "" Ta "Cursor Y position in copy mode" .It Li "current_file" Ta "" Ta "Current configuration file" .It Li "cursor_character" Ta "" Ta "Character at cursor in pane" .It Li "cursor_flag" Ta "" Ta "Pane cursor flag" .It Li "cursor_x" Ta "" Ta "Cursor X position in pane" .It Li "cursor_y" Ta "" Ta "Cursor Y position in pane" .It Li "history_bytes" Ta "" Ta "Number of bytes in window history" .It Li "history_limit" Ta "" Ta "Maximum window history lines" .It Li "history_size" Ta "" Ta "Size of history in lines" .It Li "hook" Ta "" Ta "Name of running hook, if any" .It Li "hook_client" Ta "" Ta "Name of client where hook was run, if any" .It Li "hook_pane" Ta "" Ta "ID of pane where hook was run, if any" .It Li "hook_session" Ta "" Ta "ID of session where hook was run, if any" .It Li "hook_session_name" Ta "" Ta "Name of session where hook was run, if any" .It Li "hook_window" Ta "" Ta "ID of window where hook was run, if any" .It Li "hook_window_name" Ta "" Ta "Name of window where hook was run, if any" .It Li "host" Ta "#H" Ta "Hostname of local host" .It Li "host_short" Ta "#h" Ta "Hostname of local host (no domain name)" .It Li "insert_flag" Ta "" Ta "Pane insert flag" .It Li "keypad_cursor_flag" Ta "" Ta "Pane keypad cursor flag" .It Li "keypad_flag" Ta "" Ta "Pane keypad flag" .It Li "last_window_index" Ta "" Ta "Index of last window in session" .It Li "line" Ta "" Ta "Line number in the list" .It Li "mouse_all_flag" Ta "" Ta "Pane mouse all flag" .It Li "mouse_any_flag" Ta "" Ta "Pane mouse any flag" .It Li "mouse_button_flag" Ta "" Ta "Pane mouse button flag" .It Li "mouse_line" Ta "" Ta "Line under mouse, if any" .It Li "mouse_sgr_flag" Ta "" Ta "Pane mouse SGR flag" .It Li "mouse_standard_flag" Ta "" Ta "Pane mouse standard flag" .It Li "mouse_utf8_flag" Ta "" Ta "Pane mouse UTF-8 flag" .It Li "mouse_word" Ta "" Ta "Word under mouse, if any" .It Li "mouse_x" Ta "" Ta "Mouse X position, if any" .It Li "mouse_y" Ta "" Ta "Mouse Y position, if any" .It Li "origin_flag" Ta "" Ta "Pane origin flag" .It Li "pane_active" Ta "" Ta "1 if active pane" .It Li "pane_at_bottom" Ta "" Ta "1 if pane is at the bottom of window" .It Li "pane_at_left" Ta "" Ta "1 if pane is at the left of window" .It Li "pane_at_right" Ta "" Ta "1 if pane is at the right of window" .It Li "pane_at_top" Ta "" Ta "1 if pane is at the top of window" .It Li "pane_bg" Ta "" Ta "Pane background colour" .It Li "pane_bottom" Ta "" Ta "Bottom of pane" .It Li "pane_current_command" Ta "" Ta "Current command if available" .It Li "pane_current_path" Ta "" Ta "Current path if available" .It Li "pane_dead" Ta "" Ta "1 if pane is dead" .It Li "pane_dead_status" Ta "" Ta "Exit status of process in dead pane" .It Li "pane_fg" Ta "" Ta "Pane foreground colour" .It Li "pane_format" Ta "" Ta "1 if format is for a pane" .It Li "pane_height" Ta "" Ta "Height of pane" .It Li "pane_id" Ta "#D" Ta "Unique pane ID" .It Li "pane_in_mode" Ta "" Ta "1 if pane is in a mode" .It Li "pane_index" Ta "#P" Ta "Index of pane" .It Li "pane_input_off" Ta "" Ta "1 if input to pane is disabled" .It Li "pane_last" Ta "" Ta "1 if last pane" .It Li "pane_left" Ta "" Ta "Left of pane" .It Li "pane_marked" Ta "" Ta "1 if this is the marked pane" .It Li "pane_marked_set" Ta "" Ta "1 if a marked pane is set" .It Li "pane_mode" Ta "" Ta "Name of pane mode, if any" .It Li "pane_path" Ta "" Ta "Path of pane (can be set by application)" .It Li "pane_pid" Ta "" Ta "PID of first process in pane" .It Li "pane_pipe" Ta "" Ta "1 if pane is being piped" .It Li "pane_right" Ta "" Ta "Right of pane" .It Li "pane_search_string" Ta "" Ta "Last search string in copy mode" .It Li "pane_start_command" Ta "" Ta "Command pane started with" .It Li "pane_synchronized" Ta "" Ta "1 if pane is synchronized" .It Li "pane_tabs" Ta "" Ta "Pane tab positions" .It Li "pane_title" Ta "#T" Ta "Title of pane (can be set by application)" .It Li "pane_top" Ta "" Ta "Top of pane" .It Li "pane_tty" Ta "" Ta "Pseudo terminal of pane" .It Li "pane_width" Ta "" Ta "Width of pane" .It Li "pid" Ta "" Ta "Server PID" .It Li "rectangle_toggle" Ta "" Ta "1 if rectangle selection is activated" .It Li "scroll_position" Ta "" Ta "Scroll position in copy mode" .It Li "scroll_region_lower" Ta "" Ta "Bottom of scroll region in pane" .It Li "scroll_region_upper" Ta "" Ta "Top of scroll region in pane" .It Li "search_match" Ta "" Ta "Search match if any" .It Li "search_present" Ta "" Ta "1 if search started in copy mode" .It Li "selection_active" Ta "" Ta "1 if selection started and changes with the cursor in copy mode" .It Li "selection_end_x" Ta "" Ta "X position of the end of the selection" .It Li "selection_end_y" Ta "" Ta "Y position of the end of the selection" .It Li "selection_present" Ta "" Ta "1 if selection started in copy mode" .It Li "selection_start_x" Ta "" Ta "X position of the start of the selection" .It Li "selection_start_y" Ta "" Ta "Y position of the start of the selection" .It Li "session_activity" Ta "" Ta "Time of session last activity" .It Li "session_alerts" Ta "" Ta "List of window indexes with alerts" .It Li "session_attached" Ta "" Ta "Number of clients session is attached to" .It Li "session_attached_list" Ta "" Ta "List of clients session is attached to" .It Li "session_created" Ta "" Ta "Time session created" .It Li "session_format" Ta "" Ta "1 if format is for a session" .It Li "session_group" Ta "" Ta "Name of session group" .It Li "session_group_attached" Ta "" Ta "Number of clients sessions in group are attached to" .It Li "session_group_attached_list" Ta "" Ta "List of clients sessions in group are attached to" .It Li "session_group_list" Ta "" Ta "List of sessions in group" .It Li "session_group_many_attached" Ta "" Ta "1 if multiple clients attached to sessions in group" .It Li "session_group_size" Ta "" Ta "Size of session group" .It Li "session_grouped" Ta "" Ta "1 if session in a group" .It Li "session_id" Ta "" Ta "Unique session ID" .It Li "session_last_attached" Ta "" Ta "Time session last attached" .It Li "session_many_attached" Ta "" Ta "1 if multiple clients attached" .It Li "session_marked" Ta "" Ta "1 if this session contains the marked pane" .It Li "session_name" Ta "#S" Ta "Name of session" .It Li "session_path" Ta "" Ta "Working directory of session" .It Li "session_stack" Ta "" Ta "Window indexes in most recent order" .It Li "session_windows" Ta "" Ta "Number of windows in session" .It Li "socket_path" Ta "" Ta "Server socket path" .It Li "start_time" Ta "" Ta "Server start time" .It Li "version" Ta "" Ta "Server version" .It Li "window_active" Ta "" Ta "1 if window active" .It Li "window_active_clients" Ta "" Ta "Number of clients viewing this window" .It Li "window_active_clients_list" Ta "" Ta "List of clients viewing this window" .It Li "window_active_sessions" Ta "" Ta "Number of sessions on which this window is active" .It Li "window_active_sessions_list" Ta "" Ta "List of sessions on which this window is active" .It Li "window_activity" Ta "" Ta "Time of window last activity" .It Li "window_activity_flag" Ta "" Ta "1 if window has activity" .It Li "window_bell_flag" Ta "" Ta "1 if window has bell" .It Li "window_bigger" Ta "" Ta "1 if window is larger than client" .It Li "window_cell_height" Ta "" Ta "Height of each cell in pixels" .It Li "window_cell_width" Ta "" Ta "Width of each cell in pixels" .It Li "window_end_flag" Ta "" Ta "1 if window has the highest index" .It Li "window_flags" Ta "#F" Ta "Window flags with # escaped as ##" .It Li "window_raw_flags" Ta "" Ta "Window flags with nothing escaped" .It Li "window_format" Ta "" Ta "1 if format is for a window" .It Li "window_height" Ta "" Ta "Height of window" .It Li "window_id" Ta "" Ta "Unique window ID" .It Li "window_index" Ta "#I" Ta "Index of window" .It Li "window_last_flag" Ta "" Ta "1 if window is the last used" .It Li "window_layout" Ta "" Ta "Window layout description, ignoring zoomed window panes" .It Li "window_linked" Ta "" Ta "1 if window is linked across sessions" .It Li "window_linked_sessions" Ta "" Ta "Number of sessions this window is linked to" .It Li "window_linked_sessions_list" Ta "" Ta "List of sessions this window is linked to" .It Li "window_marked_flag" Ta "" Ta "1 if window contains the marked pane" .It Li "window_name" Ta "#W" Ta "Name of window" .It Li "window_offset_x" Ta "" Ta "X offset into window if larger than client" .It Li "window_offset_y" Ta "" Ta "Y offset into window if larger than client" .It Li "window_panes" Ta "" Ta "Number of panes in window" .It Li "window_silence_flag" Ta "" Ta "1 if window has silence alert" .It Li "window_stack_index" Ta "" Ta "Index in session most recent stack" .It Li "window_start_flag" Ta "" Ta "1 if window has the lowest index" .It Li "window_visible_layout" Ta "" Ta "Window layout description, respecting zoomed window panes" .It Li "window_width" Ta "" Ta "Width of window" .It Li "window_zoomed_flag" Ta "" Ta "1 if window is zoomed" .It Li "wrap_flag" Ta "" Ta "Pane wrap flag" .El .Sh STYLES .Nm offers various options to specify the colour and attributes of aspects of the interface, for example .Ic status-style for the status line. In addition, embedded styles may be specified in format options, such as .Ic status-left , by enclosing them in .Ql #[ and .Ql \&] . .Pp A style may be the single term .Ql default to specify the default style (which may come from an option, for example .Ic status-style in the status line) or a space or comma separated list of the following: .Bl -tag -width Ds .It Ic fg=colour Set the foreground colour. The colour is one of: .Ic black , .Ic red , .Ic green , .Ic yellow , .Ic blue , .Ic magenta , .Ic cyan , .Ic white ; if supported the bright variants .Ic brightred , .Ic brightgreen , .Ic brightyellow ; .Ic colour0 to .Ic colour255 from the 256-colour set; .Ic default for the default colour; .Ic terminal for the terminal default colour; or a hexadecimal RGB string such as .Ql #ffffff . .It Ic bg=colour Set the background colour. .It Ic none Set no attributes (turn off any active attributes). .It Xo Ic acs , .Ic bright (or .Ic bold ) , .Ic dim , .Ic underscore , .Ic blink , .Ic reverse , .Ic hidden , .Ic italics , .Ic overline , .Ic strikethrough , .Ic double-underscore , .Ic curly-underscore , .Ic dotted-underscore , .Ic dashed-underscore .Xc Set an attribute. Any of the attributes may be prefixed with .Ql no to unset. .Ic acs is the terminal alternate character set. .It Xo Ic align=left (or .Ic noalign ) , .Ic align=centre , .Ic align=right .Xc Align text to the left, centre or right of the available space if appropriate. .It Ic fill=colour Fill the available space with a background colour if appropriate. .It Xo Ic list=on , .Ic list=focus , .Ic list=left-marker , .Ic list=right-marker , .Ic nolist .Xc Mark the position of the various window list components in the .Ic status-format option: .Ic list=on marks the start of the list; .Ic list=focus is the part of the list that should be kept in focus if the entire list won't fit in the available space (typically the current window); .Ic list=left-marker and .Ic list=right-marker mark the text to be used to mark that text has been trimmed from the left or right of the list if there is not enough space. .It Xo Ic push-default , .Ic pop-default .Xc Store the current colours and attributes as the default or reset to the previous default. A .Ic push-default affects any subsequent use of the .Ic default term until a .Ic pop-default . Only one default may be pushed (each .Ic push-default replaces the previous saved default). .It Xo Ic range=left , .Ic range=right , .Ic range=window|X , .Ic norange .Xc Mark a range in the .Ic status-format option. .Ic range=left and .Ic range=right are the text used for the .Ql StatusLeft and .Ql StatusRight mouse keys. .Ic range=window|X is the range for a window passed to the .Ql Status mouse key, where .Ql X is a window index. .El .Pp Examples are: .Bd -literal -offset indent fg=yellow bold underscore blink bg=black,fg=default,noreverse .Ed .Sh NAMES AND TITLES .Nm distinguishes between names and titles. Windows and sessions have names, which may be used to specify them in targets and are displayed in the status line and various lists: the name is the .Nm identifier for a window or session. Only panes have titles. A pane's title is typically set by the program running inside the pane using an escape sequence (like it would set the .Xr xterm 1 window title in .Xr X 7 ) . Windows themselves do not have titles - a window's title is the title of its active pane. .Nm itself may set the title of the terminal in which the client is running, see the .Ic set-titles option. .Pp A session's name is set with the .Ic new-session and .Ic rename-session commands. A window's name is set with one of: .Bl -enum -width Ds .It A command argument (such as .Fl n for .Ic new-window or .Ic new-session ) . .It An escape sequence (if the .Ic allow-rename option is turned on): .Bd -literal -offset indent $ printf '\e033kWINDOW_NAME\e033\e\e' .Ed .It Automatic renaming, which sets the name to the active command in the window's active pane. See the .Ic automatic-rename option. .El .Pp When a pane is first created, its title is the hostname. A pane's title can be set via the title setting escape sequence, for example: .Bd -literal -offset indent $ printf '\e033]2;My Title\e033\e\e' .Ed .Pp It can also be modified with the .Ic select-pane .Fl T command. .Sh GLOBAL AND SESSION ENVIRONMENT When the server is started, .Nm copies the environment into the .Em global environment ; in addition, each session has a .Em session environment . When a window is created, the session and global environments are merged. If a variable exists in both, the value from the session environment is used. The result is the initial environment passed to the new process. .Pp The .Ic update-environment session option may be used to update the session environment from the client when a new session is created or an old reattached. .Nm also initialises the .Ev TMUX variable with some internal information to allow commands to be executed from inside, and the .Ev TERM variable with the correct terminal setting of .Ql screen . .Pp Variables in both session and global environments may be marked as hidden. Hidden variables are not passed into the environment of new processes and instead can only be used by tmux itself (for example in formats, see the .Sx FORMATS section). .Pp Commands to alter and view the environment are: .Bl -tag -width Ds .Tg setenv .It Xo Ic set-environment .Op Fl Fhgru .Op Fl t Ar target-session .Ar name Op Ar value .Xc .D1 Pq alias: Ic setenv Set or unset an environment variable. If .Fl g is used, the change is made in the global environment; otherwise, it is applied to the session environment for .Ar target-session . If .Fl F is present, then .Ar value is expanded as a format. The .Fl u flag unsets a variable. .Fl r indicates the variable is to be removed from the environment before starting a new process. .Fl h marks the variable as hidden. .Tg showenv .It Xo Ic show-environment .Op Fl hgs .Op Fl t Ar target-session .Op Ar variable .Xc .D1 Pq alias: Ic showenv Display the environment for .Ar target-session or the global environment with .Fl g . If .Ar variable is omitted, all variables are shown. Variables removed from the environment are prefixed with .Ql - . If .Fl s is used, the output is formatted as a set of Bourne shell commands. .Fl h shows hidden variables (omitted by default). .El .Sh STATUS LINE .Nm includes an optional status line which is displayed in the bottom line of each terminal. .Pp By default, the status line is enabled and one line in height (it may be disabled or made multiple lines with the .Ic status session option) and contains, from left-to-right: the name of the current session in square brackets; the window list; the title of the active pane in double quotes; and the time and date. .Pp Each line of the status line is configured with the .Ic status-format option. The default is made of three parts: configurable left and right sections (which may contain dynamic content such as the time or output from a shell command, see the .Ic status-left , .Ic status-left-length , .Ic status-right , and .Ic status-right-length options below), and a central window list. By default, the window list shows the index, name and (if any) flag of the windows present in the current session in ascending numerical order. It may be customised with the .Ar window-status-format and .Ar window-status-current-format options. The flag is one of the following symbols appended to the window name: .Bl -column "Symbol" "Meaning" -offset indent .It Sy "Symbol" Ta Sy "Meaning" .It Li "*" Ta "Denotes the current window." .It Li "-" Ta "Marks the last window (previously selected)." .It Li "#" Ta "Window activity is monitored and activity has been detected." .It Li "\&!" Ta "Window bells are monitored and a bell has occurred in the window." .It Li "~" Ta "The window has been silent for the monitor-silence interval." .It Li "M" Ta "The window contains the marked pane." .It Li "Z" Ta "The window's active pane is zoomed." .El .Pp The # symbol relates to the .Ic monitor-activity window option. The window name is printed in inverted colours if an alert (bell, activity or silence) is present. .Pp The colour and attributes of the status line may be configured, the entire status line using the .Ic status-style session option and individual windows using the .Ic window-status-style window option. .Pp The status line is automatically refreshed at interval if it has changed, the interval may be controlled with the .Ic status-interval session option. .Pp Commands related to the status line are as follows: .Bl -tag -width Ds .Tg clrphist .It Xo Ic clear-prompt-history .Op Fl T Ar prompt-type .Xc .D1 Pq alias: Ic clrphist Clear status prompt history for prompt type .Ar prompt-type . If .Fl T is omitted, then clear history for all types. See .Ic command-prompt for possible values for .Ar prompt-type . .It Xo Ic command-prompt .Op Fl 1bFikN .Op Fl I Ar inputs .Op Fl p Ar prompts .Op Fl t Ar target-client .Op Fl T Ar prompt-type .Op Ar template .Xc Open the command prompt in a client. This may be used from inside .Nm to execute commands interactively. .Pp If .Ar template is specified, it is used as the command. With .Fl F , .Ar template is expanded as a format. .Pp If present, .Fl I is a comma-separated list of the initial text for each prompt. If .Fl p is given, .Ar prompts is a comma-separated list of prompts which are displayed in order; otherwise a single prompt is displayed, constructed from .Ar template if it is present, or .Ql \&: if not. .Pp Before the command is executed, the first occurrence of the string .Ql %% and all occurrences of .Ql %1 are replaced by the response to the first prompt, all .Ql %2 are replaced with the response to the second prompt, and so on for further prompts. Up to nine prompt responses may be replaced .Po .Ql %1 to .Ql %9 .Pc . .Ql %%% is like .Ql %% but any quotation marks are escaped. .Pp .Fl 1 makes the prompt only accept one key press, in this case the resulting input is a single character. .Fl k is like .Fl 1 but the key press is translated to a key name. .Fl N makes the prompt only accept numeric key presses. .Fl i executes the command every time the prompt input changes instead of when the user exits the command prompt. .Pp .Fl T tells .Nm the prompt type. This affects what completions are offered when .Em Tab is pressed. Available types are: .Ql command , .Ql search , .Ql target and .Ql window-target . .Pp The following keys have a special meaning in the command prompt, depending on the value of the .Ic status-keys option: .Bl -column "FunctionXXXXXXXXXXXXXXXXXXXXXXXXX" "viXXXX" "emacsX" -offset indent .It Sy "Function" Ta Sy "vi" Ta Sy "emacs" .It Li "Cancel command prompt" Ta "q" Ta "Escape" .It Li "Delete from cursor to start of word" Ta "" Ta "C-w" .It Li "Delete entire command" Ta "d" Ta "C-u" .It Li "Delete from cursor to end" Ta "D" Ta "C-k" .It Li "Execute command" Ta "Enter" Ta "Enter" .It Li "Get next command from history" Ta "" Ta "Down" .It Li "Get previous command from history" Ta "" Ta "Up" .It Li "Insert top paste buffer" Ta "p" Ta "C-y" .It Li "Look for completions" Ta "Tab" Ta "Tab" .It Li "Move cursor left" Ta "h" Ta "Left" .It Li "Move cursor right" Ta "l" Ta "Right" .It Li "Move cursor to end" Ta "$" Ta "C-e" .It Li "Move cursor to next word" Ta "w" Ta "M-f" .It Li "Move cursor to previous word" Ta "b" Ta "M-b" .It Li "Move cursor to start" Ta "0" Ta "C-a" .It Li "Transpose characters" Ta "" Ta "C-t" .El .Pp With .Fl b , the prompt is shown in the background and the invoking client does not exit until it is dismissed. .Tg confirm .It Xo Ic confirm-before .Op Fl b .Op Fl p Ar prompt .Op Fl t Ar target-client .Ar command .Xc .D1 Pq alias: Ic confirm Ask for confirmation before executing .Ar command . If .Fl p is given, .Ar prompt is the prompt to display; otherwise a prompt is constructed from .Ar command . It may contain the special character sequences supported by the .Ic status-left option. With .Fl b , the prompt is shown in the background and the invoking client does not exit until it is dismissed. .Tg menu .It Xo Ic display-menu .Op Fl O .Op Fl c Ar target-client .Op Fl t Ar target-pane .Op Fl T Ar title .Op Fl x Ar position .Op Fl y Ar position .Ar name .Ar key .Ar command .Ar ... .Xc .D1 Pq alias: Ic menu Display a menu on .Ar target-client . .Ar target-pane gives the target for any commands run from the menu. .Pp A menu is passed as a series of arguments: first the menu item name, second the key shortcut (or empty for none) and third the command to run when the menu item is chosen. The name and command are formats, see the .Sx FORMATS and .Sx STYLES sections. If the name begins with a hyphen (-), then the item is disabled (shown dim) and may not be chosen. The name may be empty for a separator line, in which case both the key and command should be omitted. .Pp .Fl T is a format for the menu title (see .Sx FORMATS ) . .Pp .Fl x and .Fl y give the position of the menu. Both may be a row or column number, or one of the following special values: .Bl -column "XXXXX" "XXXX" -offset indent .It Sy "Value" Ta Sy "Flag" Ta Sy "Meaning" .It Li "C" Ta "Both" Ta "The centre of the terminal" .It Li "R" Ta Fl x Ta "The right side of the terminal" .It Li "P" Ta "Both" Ta "The bottom left of the pane" .It Li "M" Ta "Both" Ta "The mouse position" .It Li "W" Ta "Both" Ta "The window position on the status line" .It Li "S" Ta Fl y Ta "The line above or below the status line" .El .Pp Or a format, which is expanded including the following additional variables: .Bl -column "XXXXXXXXXXXXXXXXXXXXXXXXXX" -offset indent .It Sy "Variable name" Ta Sy "Replaced with" .It Li "popup_centre_x" Ta "Centered in the client" .It Li "popup_centre_y" Ta "Centered in the client" .It Li "popup_height" Ta "Height of menu or popup" .It Li "popup_mouse_bottom" Ta "Bottom of at the mouse" .It Li "popup_mouse_centre_x" Ta "Horizontal centre at the mouse" .It Li "popup_mouse_centre_y" Ta "Vertical centre at the mouse" .It Li "popup_mouse_top" Ta "Top at the mouse" .It Li "popup_mouse_x" Ta "Mouse X position" .It Li "popup_mouse_y" Ta "Mouse Y position" .It Li "popup_pane_bottom" Ta "Bottom of the pane" .It Li "popup_pane_left" Ta "Left of the pane" .It Li "popup_pane_right" Ta "Right of the pane" .It Li "popup_pane_top" Ta "Top of the pane" .It Li "popup_status_line_y" Ta "Above or below the status line" .It Li "popup_width" Ta "Width of menu or popup" .It Li "popup_window_status_line_x" Ta "At the window position in status line" .It Li "popup_window_status_line_y" Ta "At the status line showing the window" .El .Pp Each menu consists of items followed by a key shortcut shown in brackets. If the menu is too large to fit on the terminal, it is not displayed. Pressing the key shortcut chooses the corresponding item. If the mouse is enabled and the menu is opened from a mouse key binding, releasing the mouse button with an item selected chooses that item and releasing the mouse button without an item selected closes the menu. .Fl O changes this behaviour so that the menu does not close when the mouse button is released without an item selected the menu is not closed and a mouse button must be clicked to choose an item. .Pp The following keys are also available: .Bl -column "Key" "Function" -offset indent .It Sy "Key" Ta Sy "Function" .It Li "Enter" Ta "Choose selected item" .It Li "Up" Ta "Select previous item" .It Li "Down" Ta "Select next item" .It Li "q" Ta "Exit menu" .El .Tg display .It Xo Ic display-message .Op Fl aINpv .Op Fl c Ar target-client .Op Fl d Ar delay .Op Fl t Ar target-pane .Op Ar message .Xc .D1 Pq alias: Ic display Display a message. If .Fl p is given, the output is printed to stdout, otherwise it is displayed in the .Ar target-client status line for up to .Ar delay milliseconds. If .Ar delay is not given, the .Ic message-time option is used; a delay of zero waits for a key press. .Ql N ignores key presses and closes only after the delay expires. The format of .Ar message is described in the .Sx FORMATS section; information is taken from .Ar target-pane if .Fl t is given, otherwise the active pane. .Pp .Fl v prints verbose logging as the format is parsed and .Fl a lists the format variables and their values. .Pp .Fl I forwards any input read from stdin to the empty pane given by .Ar target-pane . .Tg popup .It Xo Ic display-popup .Op Fl BCE .Op Fl b Ar border-lines .Op Fl c Ar target-client .Op Fl d Ar start-directory .Op Fl e Ar environment .Op Fl h Ar height .Op Fl s Ar style .Op Fl S Ar border-style .Op Fl t Ar target-pane .Op Fl T Ar title .Op Fl w Ar width .Op Fl x Ar position .Op Fl y Ar position .Op Ar shell-command .Xc .D1 Pq alias: Ic popup Display a popup running .Ar shell-command on .Ar target-client . A popup is a rectangular box drawn over the top of any panes. Panes are not updated while a popup is present. .Pp .Fl E closes the popup automatically when .Ar shell-command exits. Two .Fl E closes the popup only if .Ar shell-command exited with success. .Pp .Fl x and .Fl y give the position of the popup, they have the same meaning as for the .Ic display-menu command. .Fl w and .Fl h give the width and height - both may be a percentage (followed by .Ql % ) . If omitted, half of the terminal size is used. .Pp .Fl B does not surround the popup by a border. .Pp .Fl b sets the type of border line for the popup. When .Fl B is specified the .Fl b option is ignored. See .Ic popup-border-lines for possible values for .Ar border-lines . .Pp .Fl s sets the style for the popup and .Fl S sets the style for the popup border. For how to specify .Ar style , see the .Sx STYLES section. .Pp .Fl e takes the form .Ql VARIABLE=value and sets an environment variable for the popup; it may be specified multiple times. .Pp .Fl T is a format for the popup title (see .Sx FORMATS ) . .Pp The .Fl C flag closes any popup on the client. .Tg showphist .It Xo Ic show-prompt-history .Op Fl T Ar prompt-type .Xc .D1 Pq alias: Ic showphist Display status prompt history for prompt type .Ar prompt-type . If .Fl T is omitted, then show history for all types. See .Ic command-prompt for possible values for .Ar prompt-type . .El .Sh BUFFERS .Nm maintains a set of named .Em paste buffers . Each buffer may be either explicitly or automatically named. Explicitly named buffers are named when created with the .Ic set-buffer or .Ic load-buffer commands, or by renaming an automatically named buffer with .Ic set-buffer .Fl n . Automatically named buffers are given a name such as .Ql buffer0001 , .Ql buffer0002 and so on. When the .Ic buffer-limit option is reached, the oldest automatically named buffer is deleted. Explicitly named buffers are not subject to .Ic buffer-limit and may be deleted with the .Ic delete-buffer command. .Pp Buffers may be added using .Ic copy-mode or the .Ic set-buffer and .Ic load-buffer commands, and pasted into a window using the .Ic paste-buffer command. If a buffer command is used and no buffer is specified, the most recently added automatically named buffer is assumed. .Pp A configurable history buffer is also maintained for each window. By default, up to 2000 lines are kept; this can be altered with the .Ic history-limit option (see the .Ic set-option command above). .Pp The buffer commands are as follows: .Bl -tag -width Ds .It Xo .Ic choose-buffer .Op Fl NZr .Op Fl F Ar format .Op Fl f Ar filter .Op Fl K Ar key-format .Op Fl O Ar sort-order .Op Fl t Ar target-pane .Op Ar template .Xc Put a pane into buffer mode, where a buffer may be chosen interactively from a list. Each buffer is shown on one line. A shortcut key is shown on the left in brackets allowing for immediate choice, or the list may be navigated and an item chosen or otherwise manipulated using the keys below. .Fl Z zooms the pane. The following keys may be used in buffer mode: .Bl -column "Key" "Function" -offset indent .It Sy "Key" Ta Sy "Function" .It Li "Enter" Ta "Paste selected buffer" .It Li "Up" Ta "Select previous buffer" .It Li "Down" Ta "Select next buffer" .It Li "C-s" Ta "Search by name or content" .It Li "n" Ta "Repeat last search" .It Li "t" Ta "Toggle if buffer is tagged" .It Li "T" Ta "Tag no buffers" .It Li "C-t" Ta "Tag all buffers" .It Li "p" Ta "Paste selected buffer" .It Li "P" Ta "Paste tagged buffers" .It Li "d" Ta "Delete selected buffer" .It Li "D" Ta "Delete tagged buffers" .It Li "e" Ta "Open the buffer in an editor" .It Li "f" Ta "Enter a format to filter items" .It Li "O" Ta "Change sort field" .It Li "r" Ta "Reverse sort order" .It Li "v" Ta "Toggle preview" .It Li "q" Ta "Exit mode" .El .Pp After a buffer is chosen, .Ql %% is replaced by the buffer name in .Ar template and the result executed as a command. If .Ar template is not given, "paste-buffer -b '%%'" is used. .Pp .Fl O specifies the initial sort field: one of .Ql time , .Ql name or .Ql size . .Fl r reverses the sort order. .Fl f specifies an initial filter: the filter is a format - if it evaluates to zero, the item in the list is not shown, otherwise it is shown. If a filter would lead to an empty list, it is ignored. .Fl F specifies the format for each item in the list and .Fl K a format for each shortcut key; both are evaluated once for each line. .Fl N starts without the preview. This command works only if at least one client is attached. .Tg clearhist .It Ic clear-history Op Fl t Ar target-pane .D1 Pq alias: Ic clearhist Remove and free the history for the specified pane. .Tg deleteb .It Ic delete-buffer Op Fl b Ar buffer-name .D1 Pq alias: Ic deleteb Delete the buffer named .Ar buffer-name , or the most recently added automatically named buffer if not specified. .Tg lsb .It Xo Ic list-buffers .Op Fl F Ar format .Op Fl f Ar filter .Xc .D1 Pq alias: Ic lsb List the global buffers. .Fl F specifies the format of each line and .Fl f a filter. Only buffers for which the filter is true are shown. See the .Sx FORMATS section. .It Xo Ic load-buffer .Op Fl w .Op Fl b Ar buffer-name .Op Fl t Ar target-client .Ar path .Xc .Tg loadb .D1 Pq alias: Ic loadb Load the contents of the specified paste buffer from .Ar path . If .Fl w is given, the buffer is also sent to the clipboard for .Ar target-client using the .Xr xterm 1 escape sequence, if possible. .Tg pasteb .It Xo Ic paste-buffer .Op Fl dpr .Op Fl b Ar buffer-name .Op Fl s Ar separator .Op Fl t Ar target-pane .Xc .D1 Pq alias: Ic pasteb Insert the contents of a paste buffer into the specified pane. If not specified, paste into the current one. With .Fl d , also delete the paste buffer. When output, any linefeed (LF) characters in the paste buffer are replaced with a separator, by default carriage return (CR). A custom separator may be specified using the .Fl s flag. The .Fl r flag means to do no replacement (equivalent to a separator of LF). If .Fl p is specified, paste bracket control codes are inserted around the buffer if the application has requested bracketed paste mode. .Tg saveb .It Xo Ic save-buffer .Op Fl a .Op Fl b Ar buffer-name .Ar path .Xc .D1 Pq alias: Ic saveb Save the contents of the specified paste buffer to .Ar path . The .Fl a option appends to rather than overwriting the file. .It Xo Ic set-buffer .Op Fl aw .Op Fl b Ar buffer-name .Op Fl t Ar target-client .Tg setb .Op Fl n Ar new-buffer-name .Ar data .Xc .D1 Pq alias: Ic setb Set the contents of the specified buffer to .Ar data . If .Fl w is given, the buffer is also sent to the clipboard for .Ar target-client using the .Xr xterm 1 escape sequence, if possible. The .Fl a option appends to rather than overwriting the buffer. The .Fl n option renames the buffer to .Ar new-buffer-name . .Tg showb .It Xo Ic show-buffer .Op Fl b Ar buffer-name .Xc .D1 Pq alias: Ic showb Display the contents of the specified buffer. .El .Sh MISCELLANEOUS Miscellaneous commands are as follows: .Bl -tag -width Ds .It Ic clock-mode Op Fl t Ar target-pane Display a large clock. .Tg if .It Xo Ic if-shell .Op Fl bF .Op Fl t Ar target-pane .Ar shell-command command .Op Ar command .Xc .D1 Pq alias: Ic if Execute the first .Ar command if .Ar shell-command (run with .Pa /bin/sh ) returns success or the second .Ar command otherwise. Before being executed, .Ar shell-command is expanded using the rules specified in the .Sx FORMATS section, including those relevant to .Ar target-pane . With .Fl b , .Ar shell-command is run in the background. .Pp If .Fl F is given, .Ar shell-command is not executed but considered success if neither empty nor zero (after formats are expanded). .Tg lock .It Ic lock-server .D1 Pq alias: Ic lock Lock each client individually by running the command specified by the .Ic lock-command option. .Tg run .It Xo Ic run-shell .Op Fl bC .Op Fl d Ar delay .Op Fl t Ar target-pane .Op Ar shell-command .Xc .D1 Pq alias: Ic run Execute .Ar shell-command using .Pa /bin/sh or (with .Fl C ) a .Nm command in the background without creating a window. Before being executed, .Ar shell-command is expanded using the rules specified in the .Sx FORMATS section. With .Fl b , the command is run in the background. .Fl d waits for .Ar delay seconds before starting the command. If .Fl C is not given, any output to stdout is displayed in view mode (in the pane specified by .Fl t or the current pane if omitted) after the command finishes. If the command fails, the exit status is also displayed. .Tg wait .It Xo Ic wait-for .Op Fl L | S | U .Ar channel .Xc .D1 Pq alias: Ic wait When used without options, prevents the client from exiting until woken using .Ic wait-for .Fl S with the same channel. When .Fl L is used, the channel is locked and any clients that try to lock the same channel are made to wait until the channel is unlocked with .Ic wait-for .Fl U . .El .Sh EXIT MESSAGES When a .Nm client detaches, it prints a message. This may be one of: .Bl -tag -width Ds .It detached (from session ...) The client was detached normally. .It detached and SIGHUP The client was detached and its parent sent the .Dv SIGHUP signal (for example with .Ic detach-client .Fl P ) . .It lost tty The client's .Xr tty 4 or .Xr pty 4 was unexpectedly destroyed. .It terminated The client was killed with .Dv SIGTERM . .It too far behind The client is in control mode and became unable to keep up with the data from .Nm . .It exited The server exited when it had no sessions. .It server exited The server exited when it received .Dv SIGTERM . .It server exited unexpectedly The server crashed or otherwise exited without telling the client the reason. .El .Sh TERMINFO EXTENSIONS .Nm understands some unofficial extensions to .Xr terminfo 5 . It is not normally necessary to set these manually, instead the .Ic terminal-features option should be used. .Bl -tag -width Ds .It Em \&AX An existing extension that tells .Nm the terminal supports default colours. .It Em \&Bidi Tell .Nm that the terminal supports the VTE bidirectional text extensions. .It Em \&Cs , Cr Set the cursor colour. The first takes a single string argument and is used to set the colour; the second takes no arguments and restores the default cursor colour. If set, a sequence such as this may be used to change the cursor colour from inside .Nm : .Bd -literal -offset indent $ printf '\e033]12;red\e033\e\e' .Ed .Pp The colour is an .Xr X 7 colour, see .Xr XParseColor 3 . .It Em \&Cmg, \&Clmg, \&Dsmg , \&Enmg Set, clear, disable or enable DECSLRM margins. These are set automatically if the terminal reports it is .Em VT420 compatible. .It Em \&Dsbp , \&Enbp Disable and enable bracketed paste. These are set automatically if the .Em XT capability is present. .It Em \&Dseks , \&Eneks Disable and enable extended keys. .It Em \&Dsfcs , \&Enfcs Disable and enable focus reporting. These are set automatically if the .Em XT capability is present. .It Em \&Rect Tell .Nm that the terminal supports rectangle operations. .It Em \&Smol Enable the overline attribute. .It Em \&Smulx Set a styled underscore. The single parameter is one of: 0 for no underscore, 1 for normal underscore, 2 for double underscore, 3 for curly underscore, 4 for dotted underscore and 5 for dashed underscore. .It Em \&Setulc , \&ol Set the underscore colour or reset to the default. The argument is (red * 65536) + (green * 256) + blue where each is between 0 and 255. .It Em \&Ss , Se Set or reset the cursor style. If set, a sequence such as this may be used to change the cursor to an underline: .Bd -literal -offset indent $ printf '\e033[4 q' .Ed .Pp If .Em Se is not set, \&Ss with argument 0 will be used to reset the cursor style instead. .It Em \&Sync Start (parameter is 1) or end (parameter is 2) a synchronized update. .It Em \&Tc Indicate that the terminal supports the .Ql direct colour RGB escape sequence (for example, \ee[38;2;255;255;255m). .Pp If supported, this is used for the initialize colour escape sequence (which may be enabled by adding the .Ql initc and .Ql ccc capabilities to the .Nm .Xr terminfo 5 entry). .Pp This is equivalent to the .Em RGB .Xr terminfo 5 capability. .It Em \&Ms Store the current buffer in the host terminal's selection (clipboard). See the .Em set-clipboard option above and the .Xr xterm 1 man page. .It Em \&XT This is an existing extension capability that tmux uses to mean that the terminal supports the .Xr xterm 1 title set sequences and to automatically set some of the capabilities above. .El .Sh CONTROL MODE .Nm offers a textual interface called .Em control mode . This allows applications to communicate with .Nm using a simple text-only protocol. .Pp In control mode, a client sends .Nm commands or command sequences terminated by newlines on standard input. Each command will produce one block of output on standard output. An output block consists of a .Em %begin line followed by the output (which may be empty). The output block ends with a .Em %end or .Em %error . .Em %begin and matching .Em %end or .Em %error have three arguments: an integer time (as seconds from epoch), command number and flags (currently not used). For example: .Bd -literal -offset indent %begin 1363006971 2 1 0: ksh* (1 panes) [80x24] [layout b25f,80x24,0,0,2] @2 (active) %end 1363006971 2 1 .Ed .Pp The .Ic refresh-client .Fl C command may be used to set the size of a client in control mode. .Pp In control mode, .Nm outputs notifications. A notification will never occur inside an output block. .Pp The following notifications are defined: .Bl -tag -width Ds .It Ic %client-detached Ar client The client has detached. .It Ic %client-session-changed Ar client session-id name The client is now attached to the session with ID .Ar session-id , which is named .Ar name . .It Ic %continue Ar pane-id The pane has been continued after being paused (if the .Ar pause-after flag is set, see .Ic refresh-client .Fl A ) . .It Ic %exit Op Ar reason The .Nm client is exiting immediately, either because it is not attached to any session or an error occurred. If present, .Ar reason describes why the client exited. .It Ic %extended-output Ar pane-id Ar age Ar ... \& : Ar value New form of .Ic %output sent when the .Ar pause-after flag is set. .Ar age is the time in milliseconds for which tmux had buffered the output before it was sent. Any subsequent arguments up until a single .Ql \&: are for future use and should be ignored. .It Ic %layout-change Ar window-id Ar window-layout Ar window-visible-layout Ar window-flags The layout of a window with ID .Ar window-id changed. The new layout is .Ar window-layout . The window's visible layout is .Ar window-visible-layout and the window flags are .Ar window-flags . .It Ic %output Ar pane-id Ar value A window pane produced output. .Ar value escapes non-printable characters and backslash as octal \\xxx. .It Ic %pane-mode-changed Ar pane-id The pane with ID .Ar pane-id has changed mode. .It Ic %pause Ar pane-id The pane has been paused (if the .Ar pause-after flag is set). .It Ic %session-changed Ar session-id Ar name The client is now attached to the session with ID .Ar session-id , which is named .Ar name . .It Ic %session-renamed Ar name The current session was renamed to .Ar name . .It Ic %session-window-changed Ar session-id Ar window-id The session with ID .Ar session-id changed its active window to the window with ID .Ar window-id . .It Ic %sessions-changed A session was created or destroyed. .It Xo Ic %subscription-changed .Ar name .Ar session-id .Ar window-id .Ar window-index .Ar pane-id ... \& : .Ar value .Xc The value of the format associated with subscription .Ar name has changed to .Ar value . See .Ic refresh-client .Fl B . Any arguments after .Ar pane-id up until a single .Ql \&: are for future use and should be ignored. .It Ic %unlinked-window-add Ar window-id The window with ID .Ar window-id was created but is not linked to the current session. .It Ic %unlinked-window-close Ar window-id The window with ID .Ar window-id , which is not linked to the current session, was closed. .It Ic %unlinked-window-renamed Ar window-id The window with ID .Ar window-id , which is not linked to the current session, was renamed. .It Ic %window-add Ar window-id The window with ID .Ar window-id was linked to the current session. .It Ic %window-close Ar window-id The window with ID .Ar window-id closed. .It Ic %window-pane-changed Ar window-id Ar pane-id The active pane in the window with ID .Ar window-id changed to the pane with ID .Ar pane-id . .It Ic %window-renamed Ar window-id Ar name The window with ID .Ar window-id was renamed to .Ar name . .El .Sh ENVIRONMENT When .Nm is started, it inspects the following environment variables: .Bl -tag -width LC_CTYPE .It Ev EDITOR If the command specified in this variable contains the string .Ql vi and .Ev VISUAL is unset, use vi-style key bindings. Overridden by the .Ic mode-keys and .Ic status-keys options. .It Ev HOME The user's login directory. If unset, the .Xr passwd 5 database is consulted. .It Ev LC_CTYPE The character encoding .Xr locale 1 . It is used for two separate purposes. For output to the terminal, UTF-8 is used if the .Fl u option is given or if .Ev LC_CTYPE contains .Qq UTF-8 or .Qq UTF8 . Otherwise, only ASCII characters are written and non-ASCII characters are replaced with underscores .Pq Ql _ . For input, .Nm always runs with a UTF-8 locale. If en_US.UTF-8 is provided by the operating system it is used and .Ev LC_CTYPE is ignored for input. Otherwise, .Ev LC_CTYPE tells .Nm what the UTF-8 locale is called on the current system. If the locale specified by .Ev LC_CTYPE is not available or is not a UTF-8 locale, .Nm exits with an error message. .It Ev LC_TIME The date and time format .Xr locale 1 . It is used for locale-dependent .Xr strftime 3 format specifiers. .It Ev PWD The current working directory to be set in the global environment. This may be useful if it contains symbolic links. If the value of the variable does not match the current working directory, the variable is ignored and the result of .Xr getcwd 3 is used instead. .It Ev SHELL The absolute path to the default shell for new windows. See the .Ic default-shell option for details. .It Ev TMUX_TMPDIR The parent directory of the directory containing the server sockets. See the .Fl L option for details. .It Ev VISUAL If the command specified in this variable contains the string .Ql vi , use vi-style key bindings. Overridden by the .Ic mode-keys and .Ic status-keys options. .El .Sh FILES .Bl -tag -width "/etc/tmux.confXXX" -compact .It Pa ~/.tmux.conf Default .Nm configuration file. .It Pa /etc/tmux.conf System-wide configuration file. .El .Sh EXAMPLES To create a new .Nm session running .Xr vi 1 : .Pp .Dl $ tmux new-session vi .Pp Most commands have a shorter form, known as an alias. For new-session, this is .Ic new : .Pp .Dl $ tmux new vi .Pp Alternatively, the shortest unambiguous form of a command is accepted. If there are several options, they are listed: .Bd -literal -offset indent $ tmux n ambiguous command: n, could be: new-session, new-window, next-window .Ed .Pp Within an active session, a new window may be created by typing .Ql C-b c (Ctrl followed by the .Ql b key followed by the .Ql c key). .Pp Windows may be navigated with: .Ql C-b 0 (to select window 0), .Ql C-b 1 (to select window 1), and so on; .Ql C-b n to select the next window; and .Ql C-b p to select the previous window. .Pp A session may be detached using .Ql C-b d (or by an external event such as .Xr ssh 1 disconnection) and reattached with: .Pp .Dl $ tmux attach-session .Pp Typing .Ql C-b \&? lists the current key bindings in the current window; up and down may be used to navigate the list or .Ql q to exit from it. .Pp Commands to be run when the .Nm server is started may be placed in the .Pa ~/.tmux.conf configuration file. Common examples include: .Pp Changing the default prefix key: .Bd -literal -offset indent set-option -g prefix C-a unbind-key C-b bind-key C-a send-prefix .Ed .Pp Turning the status line off, or changing its colour: .Bd -literal -offset indent set-option -g status off set-option -g status-style bg=blue .Ed .Pp Setting other options, such as the default command, or locking after 30 minutes of inactivity: .Bd -literal -offset indent set-option -g default-command "exec /bin/ksh" set-option -g lock-after-time 1800 .Ed .Pp Creating new key bindings: .Bd -literal -offset indent bind-key b set-option status bind-key / command-prompt "split-window 'exec man %%'" bind-key S command-prompt "new-window -n %1 'ssh %1'" .Ed .Sh SEE ALSO .Xr pty 4 .Sh AUTHORS .An Nicholas Marriott Aq Mt nicholas.marriott@gmail.com