Commit Graph

280 Commits

Author SHA1 Message Date
nicm
1a9f9c09b4 Do not resize panes unless they are in an attached, active window. From
Morten M Neergaard in GitHub issue 1782.
2019-06-11 13:09:00 +00:00
nicm
e37f34facc Do not load the config file if the server is exiting because it failed
to start, otherwise commands like lsk which start the server again can
end up looping infinitely. Also make the first client exit
correctly. Problem reported by Wael M Nasreddine.
2019-06-07 20:09:17 +00:00
nicm
f8d3d247d8 Merge cmd_list_parse into cmd-parse.y so it can use the new alias
processing code.
2019-05-25 07:18:20 +00:00
nicm
e128c7fcd8 Replace the various identical error callbacks with a single one in cmd-queue.c. 2019-05-20 11:46:06 +00:00
nicm
00f19b7f91 Fix some indentation and dead assignments. 2019-05-12 18:16:33 +00:00
nicm
f9682d2e55 Add a flag to redraw only the overlay, and remove the overlay on resize. 2019-05-08 18:07:12 +00:00
nicm
89db309e10 Move around the display-panes identify code to make it a bit more
generic and hide the display-panes specific bits into
cmd-display-panes.c.
2019-05-07 20:01:41 +00:00
nicm
85a9c2f52b Treat keys in identify mode (display-panes) specially and handle them
immediately rather than queuing them (the command can block the queue
which means they were not being seen until it finished which was too
late). Reported by denis@ and solene@, ok solene@.
2019-05-07 11:24:03 +00:00
nicm
9f75635596 Allow panes to be empty (no command), output can be piped to them with
split-window or display-message -I.
2019-05-03 20:44:24 +00:00
nicm
4097257bef Do not store the mouse position we calculate as the start of a drag back
into the mouse event that later code uses, it has been adjusted and they
should use the original position. GitHub issue 1710.
2019-05-03 18:42:40 +00:00
nicm
fc3d85e34b Fix mouse positioning when the pane is not entirely visible. 2019-05-03 16:51:29 +00:00
nicm
33298d6df6 Instead of processing keys all together, put them up on the client
command queue so they are ordered correctly with the commands that they
execute.
2019-05-03 14:51:30 +00:00
nicm
f3ab05e7cd Update session activity on focus event, from tafryn at gmail dot com. 2019-04-18 10:11:52 +00:00
nicm
d21f8ecc13 Add StatusDefault binding for the mouse on any otherwise unassigned
parts of the status line, from Avi Halachmi.
2019-03-25 18:59:55 +00:00
nicm
517d673dbe Ignore mouse on status line which are not part of a range, GitHub issue 1649. 2019-03-25 09:22:09 +00:00
nicm
979313832c Extend the #[] style syntax and use that together with previous format
changes to allow the status line to be entirely configured with a single
option.

Now that it is possible to configure their content, enable the existing
code that lets the status line be multiple lines in height. The status
option can now take a value of 2, 3, 4 or 5 (as well as the previous on
or off) to configure more than one line. The new status-format array
option configures the format of each line, the default just references
the existing status-* options, although some of the more obscure status
options may be eliminated in time.

Additions to the #[] syntax are: "align" to specify alignment (left,
centre, right), "list" for the window list and "range" to configure
ranges of text for the mouse bindings.

The "align" keyword can also be used to specify alignment of entries in
tree mode and the pane status lines.
2019-03-18 20:53:33 +00:00
nicm
b4f5b99e4b Tidy and rename some bits of status line code. 2019-03-16 17:14:07 +00:00
nicm
85044a634b Move status line free into its own function. 2019-03-15 14:46:58 +00:00
nicm
10d60faba5 Store the time in the format tree rather than passing it around. 2019-03-14 23:14:27 +00:00
nicm
1416ceb575 Accept 0 time as a shorthand for now to format_expand_time. 2019-03-14 21:27:26 +00:00
nicm
3f6bfbaf2b Allow multiple modes to be open in a pane. A stack of open modes is kept
and the previous restored when the top is exited. If a mode that is
already on the stack is entered, the existing instance is moved to the
top as the active mode rather than being opened new.
2019-03-12 11:16:49 +00:00
nicm
f98c66ece8 Add a separate mode struct for the active window mode if any. 2019-03-07 20:24:21 +00:00
nicm
82f0c859a2 Use starting client cwd in config file, GitHub issue 1606. 2019-02-16 11:42:08 +00:00
nicm
bde0224deb Pass window into mode functions. 2018-12-18 13:20:44 +00:00
nicm
749f67b7d8 evbuffer_new and bufferevent_new can both fail (when malloc fails) and
return NULL. GitHub issue 1547.
2018-11-19 13:35:40 +00:00
nicm
0c7f64458f If a non-repeating key is used when repeating, it should be treated as
an entirely new key press, not checked in root table and ignored if not
found. GitHub issue 1513.
2018-11-07 08:06:28 +00:00
nicm
646995384d Support for windows larger than visible on the attached client. This has
been a limitation for a long time.

There are two new options, window-size and default-size, and a new
command, resize-window. The force-width and force-height options and the
session_width and session_height formats have been removed.

The new window-size option tells tmux how to work out the size of
windows: largest means it picks the size of the largest session,
smallest the smallest session (similar to the old behaviour) and manual
means that it does not automatically resize windows. The default is
currently largest but this may change. aggressive-resize modifies the
choice of session for largest and smallest as it did before.

If a window is in a session attached to a client that is too small, only
part of the window is shown. tmux attempts to keep the cursor visible,
so the part of the window displayed is changed as the cursor moves (with
a small delay, to try and avoid excess redrawing when applications
redraw status lines or similar that are not currently visible). The
offset of the visible portion of the window is shown in status-right.

Drawing windows which are larger than the client is not as efficient as
those which fit, particularly when the cursor moves, so it is
recommended to avoid using this on slow machines or networks (set
window-size to smallest or manual).

The resize-window command can be used to resize a window manually. If it
is used, the window-size option is automatically set to manual for the
window (undo this with "setw -u window-size"). resize-window works in a
similar way to resize-pane (-U -D -L -R -x -y flags) but also has -a and
-A flags. -a sets the window to the size of the smallest client (what it
would be if window-size was smallest) and -A the largest.

For the same behaviour as force-width or force-height, use resize-window
-x or -y, and "setw -u window-size" to revert to automatic sizing..

If the global window-size option is set to manual, the default-size
option is used for new windows. If -x or -y is used with new-session,
that sets the default-size option for the new session.

The maximum size of a window is 10000x10000. But expect applications to
complain and much higher memory use if making a window excessively
big. The minimum size is the size required for the current layout
including borders.

The refresh-client command can be used to pan around a window, -U -D -L
-R moves up, down, left or right and -c returns to automatic cursor
tracking. The position is reset when the current window is changed.
2018-10-18 08:38:01 +00:00
nicm
bd9133b31d Do not check for mouse events on pane borders when zoomed, based on a
fix from Avi Halachmi.
2018-09-11 06:37:54 +00:00
nicm
f57aa143c1 Keep any text killed in the command prompt with C-w and yank it with
C-y, only use the top buffer if no text has previously been killed. This
and previous change promped by discussion with kn@.
2018-08-29 09:50:32 +00:00
nicm
55db3623bf Add StatusLeft and StatusRight mouse key modifiers for the left and
right parts of the status line.
2018-08-22 20:06:14 +00:00
nicm
cac4eadca0 Add a flag to force redrawing of the status line even if the content
hasn't changed, needed for resizing.
2018-08-19 20:13:07 +00:00
nicm
88327c7698 Add a client redraw-window flag instead of the redraw-all flag and for
all just use the three flags together (window, borders, status).
2018-08-19 16:45:03 +00:00
nicm
bd2896b65e SESSION_UNATTACHED flag is no longer necessary now we have an attached
count instead.
2018-08-18 20:08:52 +00:00
nicm
6048b0f483 Make key trees and some other bits static. 2018-08-02 11:44:07 +00:00
nicm
969af935f3 When a key isn't in the first table, we need to try the same key again
not the any key. Also rename some labels. Fixes GitHub issue 1406
reeported by Mark Kelly.
2018-07-17 18:02:40 +00:00
nicm
0d88f8a78b Add an "Any" key to run a command if a key is pressed that is not bound
in the current key table. GitHub issue 1404.
2018-07-16 08:48:22 +00:00
nicm
d254293a6d Add pane focus hooks. 2018-07-04 12:25:26 +00:00
nicm
b9a6162d2f Make server_client_get_cwd used (almost) everywhere we need to work out
the cwd, and do not fall back to "." as it is pretty useless. GitHub
issue 1331.
2018-05-24 09:42:49 +00:00
nicm
19f3a5c612 Add a missing client-detached hook when the server shuts down, and do
not exit until jobs started from run-shell/if-shell have finished (add a
job flags member and a flag to indicate other jobs). GitHub issue 1245.
2018-03-08 08:09:10 +00:00
nicm
e97daead43 Check prefix when retrying so it is checked while repeat flag is
set. GitHub issue 1239.
2018-02-22 10:58:12 +00:00
nicm
7f4513ec34 Add struct status_line to hold status line members of struct client, not
used yet but will be soon. From Thomas Adam.
2018-02-05 08:21:54 +00:00
nicm
b20a00f93e Report better error from server when socket create fails, GitHub issue
1201.
2017-12-19 15:00:39 +00:00
nicm
2f6935a630 Infrastructure for drawing status lines of more than one line in height,
still only one is allowed but this lets tmux draw bigger ones.
2017-10-16 19:30:53 +00:00
nicm
466066c3a1 Do not attempt to use TIOCSWINSZ on a -1 file descriptor (possible if
the pane has already died).
2017-09-06 07:12:41 +00:00
nicm
17cf1b21c6 Pass flags into cmd_find_from_* to fix prefer-unattached, reported by
Thomas Sattler.
2017-08-30 10:33:57 +00:00
nicm
c6a8ad23a1 Add -d flag to display-panes to specify timeout, and make 0 mean no
timeout. From Laurens Post.
2017-08-16 12:12:54 +00:00
nicm
2678fe53f5 Fix redraw defer code in the presence of multiple clients - the timer
may be needed for all of them, so don't delete it on the first; and
don't skip setting the redraw flag if the timer is already running.

Reported by Pol Van Aubel in GitHub issue 1003.
2017-07-14 08:04:23 +00:00
nicm
d0d42dc4cb proc_send_s now seems unnecessary. 2017-07-12 09:07:52 +00:00
nicm
ac7080b31b Remove xterm flag from key before checking prefix, reported by Peter
Fern in GitHub issue 974.
2017-06-13 07:12:33 +00:00
nicm
50b27c8c0d Continue and pass keys through if they are repeated keys, so that the
first key after a repeated key doesn't get lost.
2017-06-06 15:49:35 +00:00