Commit Graph

332 Commits

Author SHA1 Message Date
nicm
0e8710f507 Wait until the initial command sequence is done before sending a device
attributes request and other bits that prompt a reply from the terminal.
This means that stray relies are not left on the terminal if the command
has attached and then immediately detached and tmux will not be around
to receive them. Prompted by a problem report from espie@.
2020-04-09 12:16:16 +00:00
nicm
8a838b0372 Add support for overlay popup boxes to show text or output temporarily
above the normal layout. These work similarly to menus and are created
with the display-popup command.
2020-03-24 08:09:43 +00:00
nicm
1ddc128860 Do not return early if no bits changed because may still need to change the style. 2020-03-17 12:20:12 +00:00
nicm
37b7a29cca VTE treats each mouse mode bit as independent, so turning off 1000
doesn't also turn off 1001, so don't rely on that behaviour. GitHub
issue 2116.
2020-03-16 10:49:06 +00:00
nicm
7cae4e8e89 Turn off mouse mode 1003 as well as the rest when exiting. 2020-03-16 09:18:47 +00:00
nicm
531daba584 Do not send DA and DSR again if already have a response. 2020-01-29 15:07:49 +00:00
nicm
a6129e9974 If we can identify the terminal as iTerm2 or as tmux, we can be sure
they support 256 and RGB colours, so set those flags too.
2020-01-28 11:39:51 +00:00
nicm
da515570dc Stop handling DA and DSR after a second (they should be the first thing
sent) so this should be plenty.
2020-01-13 11:59:21 +00:00
nicm
835a6c0cf0 Be more specific in the DSR we are looking for so it doesn't get
confused with mouse sequences. Also set a flag and don't bother checking
for it if we have already seen it (same for DA), and don't check if we
never asked for it.
2020-01-13 08:12:53 +00:00
nicm
381333c4a9 Detect iTerm2 and enable DECSLRM. 2020-01-12 22:00:20 +00:00
nicm
193e637de0 The terminal type was never as much use as I expected so remove it in
favour of a couple of flags for the features used (DECSLRM and DECFRA).
Also rename the flag for no xenl to be more obvious while here.
2020-01-12 21:07:07 +00:00
nicm
f733d3f3eb Do not set cursor colour to default unless it has been changed, GitHub
issue 2013.
2019-12-11 12:13:37 +00:00
nicm
bc5881c4d2 Long lines and spacing fixes. 2019-11-28 09:56:25 +00:00
nicm
067604bf8c Store xpixel/ypixel from TIOCGWINSZ and add formats. 2019-11-28 09:05:34 +00:00
nicm
eb399e64d5 CUB and CUF are also limited by the margins so use CUP instead when
margins are enabled (we already do this for linefeed).
2019-11-14 07:56:32 +00:00
nicm
d018477359 Do not use bright when emulating 256 colours on an 8 colour terminal
because it is also bold on some terminals. GitHub issue 1914.
2019-09-19 08:56:37 +00:00
nicm
45f4ff5485 Add support for the SD (scroll down) escape sequence, GitHub issue 1861. 2019-08-05 06:42:02 +00:00
nicm
49bf7dc77e xterm 348 now disables margins when resized, so send DECLRMM again. 2019-08-01 11:45:34 +00:00
nicm
99852f8401 Fix check for wrapping when redrawing entire lines, GitHub issue 1836. 2019-07-16 14:11:52 +00:00
nicm
dae2868d12 Add support for underscore colours with Setulc capability, mostly from
Kai Moschcau.
2019-06-27 15:17:41 +00:00
nicm
80d76612b8 Fix some comments (top/bottom not left/right). 2019-06-26 13:05:06 +00:00
nicm
5f92f92908 Add a per-pane option set. Pane options inherit from window options (so
there should be no change to existing behaviour) and are set and shown
with set-option -p and show-options -p.

Change remain-on-exit and window-style/window-active-style to be pane
options (some others will be changed later).

This makes select-pane -P and -g unnecessary so no longer document them
(they still work) and no longer document set-window-option and
show-window-options in favour of set-option -w and show-options -w.
2019-06-20 11:59:59 +00:00
nicm
89d2c7eb26 I had hoped that non-xenl terminals had died out, at least in fairly
modern OSs, but no - DragonFly BSD's console returns to haunt us. Fix it
at least somewhat. GitHub issue 1763.
2019-05-30 07:42:41 +00:00
nicm
1ee944a19d Add support for overline (SGR 53), from Ricardo Banffy. 2019-05-13 20:10:23 +00:00
nicm
a609e6361a Need a fallback for -2 for aixterm colours. 2019-04-25 19:03:43 +00:00
nicm
6aa0bedad2 Use bg not fg when adjusting for aixterm, from Ailin Nemui. 2019-04-24 20:32:31 +00:00
nicm
c660e46149 Set the window size as well as the layout size when using the preset
layouts.
2019-04-17 14:43:49 +00:00
nicm
9bd4b96766 Fix ED1 (clear end of screen), reported by Marc Reisner. 2019-03-14 17:58:52 +00:00
nicm
13f9a061ac Add a wrapper (struct style) around styles rather than using the
grid_cell directly. There will be some non-cell members soon.
2019-03-14 09:53:52 +00:00
nicm
5755bfc619 Need to set attributes before clearing. 2019-03-13 22:01:22 +00:00
nicm
b2bc34af12 Set a flag on cells are genuinely empty (cleared and never written to)
and use tty_clear_line (which will choose the best escape sequence) to
clear any batches of cells with that flag when redrawing a line from the
stored screen.
2019-03-12 23:21:45 +00:00
nicm
a870c255c4 Don't set client offset if client is not a terminal 2019-03-04 09:29:40 +00:00
nicm
2ea22fce5e Should use DECFRA if not default, not if default. From Karl Beldan. 2019-01-20 15:57:27 +00:00
nicm
cd39920abd Should save the bg colour when setting it to default, not the fg. 2019-01-15 12:08:53 +00:00
nicm
749f67b7d8 evbuffer_new and bufferevent_new can both fail (when malloc fails) and
return NULL. GitHub issue 1547.
2018-11-19 13:35:40 +00:00
nicm
fc41bf46ac Add a "terminal" colour which can be used instead of "default" in style
options for the terminal default colour, bypassing any inheritance from
other options. Prompted by a discussion with abieber@.
2018-10-25 15:13:38 +00:00
nicm
646995384d Support for windows larger than visible on the attached client. This has
been a limitation for a long time.

There are two new options, window-size and default-size, and a new
command, resize-window. The force-width and force-height options and the
session_width and session_height formats have been removed.

The new window-size option tells tmux how to work out the size of
windows: largest means it picks the size of the largest session,
smallest the smallest session (similar to the old behaviour) and manual
means that it does not automatically resize windows. The default is
currently largest but this may change. aggressive-resize modifies the
choice of session for largest and smallest as it did before.

If a window is in a session attached to a client that is too small, only
part of the window is shown. tmux attempts to keep the cursor visible,
so the part of the window displayed is changed as the cursor moves (with
a small delay, to try and avoid excess redrawing when applications
redraw status lines or similar that are not currently visible). The
offset of the visible portion of the window is shown in status-right.

Drawing windows which are larger than the client is not as efficient as
those which fit, particularly when the cursor moves, so it is
recommended to avoid using this on slow machines or networks (set
window-size to smallest or manual).

The resize-window command can be used to resize a window manually. If it
is used, the window-size option is automatically set to manual for the
window (undo this with "setw -u window-size"). resize-window works in a
similar way to resize-pane (-U -D -L -R -x -y flags) but also has -a and
-A flags. -a sets the window to the size of the smallest client (what it
would be if window-size was smallest) and -A the largest.

For the same behaviour as force-width or force-height, use resize-window
-x or -y, and "setw -u window-size" to revert to automatic sizing..

If the global window-size option is set to manual, the default-size
option is used for new windows. If -x or -y is used with new-session,
that sets the default-size option for the new session.

The maximum size of a window is 10000x10000. But expect applications to
complain and much higher memory use if making a window excessively
big. The minimum size is the size required for the current layout
including borders.

The refresh-client command can be used to pan around a window, -U -D -L
-R moves up, down, left or right and -c returns to automatic cursor
tracking. The position is reset when the current window is changed.
2018-10-18 08:38:01 +00:00
nicm
bc0e527f32 Support for extended underline styles on terminals which offer them,
enabled by adding the Smulx capability with terminal-overrides (add
something like ',vte*:Smulx=\E[4\:%p1%dm'). GitHub issue 1492.
2018-10-18 07:57:57 +00:00
nicm
7d59f82cf9 Allow panes to be 1 line or column by redrawing instead of using the
scroll region, from Soeren Tempel in GitHub issue 1487.
2018-09-25 14:27:20 +00:00
nicm
be2201200f The cursor position is limited to the margins for CUF and CUB, so turn
margins off for printing cells (like most everything else already
does). Problem reported by Thomas Sattler.
2018-09-11 17:31:01 +00:00
nicm
88327c7698 Add a client redraw-window flag instead of the redraw-all flag and for
all just use the three flags together (window, borders, status).
2018-08-19 16:45:03 +00:00
nicm
3bc08b0dc0 Some tidying and helper functions. 2018-08-18 16:14:03 +00:00
nicm
2fae6a5761 Add accessors for grid linedata member, for some future work. From Dan
Aloni.
2018-07-04 09:44:07 +00:00
nicm
f915a4bf0c Handle terminfo colors > 256 correctly, GitHub issue 1337. 2018-05-07 13:39:09 +00:00
nicm
1afe71cc0a rxvt-unicode has some funny behaviour when scrolling with the cursor not
at column 1, so move it back there first if possible. GitHub issue 1318.
2018-04-23 07:41:30 +00:00
nicm
fe7a871a23 Upstream ncurses has introduced terminfo capabilities to specify RGB
colour ("true" or "direct" colour). These consist of new entries (such
as "xterm-direct") which have a different setaf/setab implementation,
colors and pairs set to 0x1000000 and 0x10000, and a new RGB flag.

The setaf/setab definitions seem to be geared towards what ncurses (or
emacs maybe) needs, in that the new versions do only ANSI and RGB
colours (they can't be used for the 256 colour palette); they rely on
the silly ISO colon-separated version of SGR; and they use a weird
multiplication scheme so they still only need one argument. The higher
values of colors and pairs require a recent ncurses to parse.

tmux can use the RGB flag to detect RGB colour support (keeping the old
Tc extension for backwards compatibility for now). However, as we still
want to send 256 colour information unchanged when possible, the new
setaf/setab are awkward. So when RGB is present, reserve setaf/setab
only for ANSI colours and use the escape sequences directly for 256 and
RGB colours. (To my knowledge no recent terminal uses unusual escape
sequences for these in any case.)
2018-02-04 10:10:39 +00:00
nicm
75842bfe66 Fix drawing of ACS characters (they need to go character-at-a-time),
accidentally broken in last commit.
2018-01-16 17:03:18 +00:00
nicm
2c5a6f9af5 Simplify character replacement on non-UTF-8 terminals and make a common
function.
2018-01-12 16:41:00 +00:00
nicm
aeda2e5808 If there is a double width character at the very end of the line with
not enough room to draw it, just leave it out.
2017-11-15 19:18:57 +00:00
nicm
2f6935a630 Infrastructure for drawing status lines of more than one line in height,
still only one is allowed but this lets tmux draw bigger ones.
2017-10-16 19:30:53 +00:00