Commit Graph

30 Commits

Author SHA1 Message Date
nicm
8a838b0372 Add support for overlay popup boxes to show text or output temporarily
above the normal layout. These work similarly to menus and are created
with the display-popup command.
2020-03-24 08:09:43 +00:00
nicm
87ea14328c Pass keys that aren't 0-9 on to normal key processing when display-panes
is active (restores previous behaviour).
2019-06-26 18:28:31 +00:00
nicm
9272fe36e2 Add a cmdq_continue function rather than twiddling the flag directly. 2019-06-18 11:08:42 +00:00
nicm
723010ba72 Replace the split parser code (cfg.c and cmd-string.c) with a single
parser using yacc(1). This is a major change but is clearer and simpler
and allows some edge cases to be made more consistent, as well as
tidying up how aliases are handled. It will also allow some further
improvements later.

Entirely the same parser is now used for parsing the configuration file
and for string commands. This means that constructs previously only
available in .tmux.conf, such as %if, can now be used in string commands
(for example, those given to if-shell - not commands invoked from the
shell, they are still parsed by the shell itself).

The only syntax change I am aware of is that #{} outside quotes or a
comment is now considered a format and not a comment, so #{ is now a
syntax error (notably, if it is at the start of a line).

This also adds two new sections to the man page documenting the syntax
and outlining how parsing and command execution works.

Thanks to everyone who sent me test configs (they still all parse
without errors - but this doesn't mean they still work as intended!).

Thanks to Avi Halachmi for testing and man page improvements, also to
jmc@ for reviewing the man page changes.
2019-05-23 11:13:30 +00:00
nicm
e128c7fcd8 Replace the various identical error callbacks with a single one in cmd-queue.c. 2019-05-20 11:46:06 +00:00
nicm
f9682d2e55 Add a flag to redraw only the overlay, and remove the overlay on resize. 2019-05-08 18:07:12 +00:00
nicm
89db309e10 Move around the display-panes identify code to make it a bit more
generic and hide the display-panes specific bits into
cmd-display-panes.c.
2019-05-07 20:01:41 +00:00
nicm
afd3127d89 Add -b to display-panes like run-shell, GitHub issue 1559. 2019-02-06 07:36:06 +00:00
kn
f103927a52 Add [template] to display-panes and choose-{buffer,client,tree} usage
OK nicm
2018-11-15 10:38:53 +00:00
nicm
21f8ac2766 Make display-panes block the client until a pane is chosen or it times out. 2018-08-02 07:55:16 +00:00
nicm
c6a8ad23a1 Add -d flag to display-panes to specify timeout, and make 0 mean no
timeout. From Laurens Post.
2017-08-16 12:12:54 +00:00
nicm
ee45a8a149 Get rid of the extra layer of flags and cmd_prepare() and just store the
CMD_FIND_* flags in the cmd_entry and call it for the command. Commands
with special requirements call it themselves and update the target for
hooks to use.
2017-04-22 10:22:39 +00:00
nicm
bce1dee034 Move the client identify (display-panes) code into server-client.c. 2017-03-09 17:06:35 +00:00
nicm
52847a9518 It is silly for cmd_list_parse to return an integer error when it could
just return NULL.
2017-01-15 22:00:56 +00:00
nicm
b342bd0b46 Mass rename struct cmd_q to struct cmdq_item and related. 2016-10-16 19:04:05 +00:00
nicm
ddc4512d2e Rewrite command queue handling. Each client still has a command queue,
but there is also now a global command queue. Instead of command queues
being dispatched on demand from wherever the command happens to be
added, they are now all dispatched from the top level server
loop. Command queues may now also include callbacks as well as commands,
and items may be inserted after the current command as well as at the end.

This all makes command queues significantly more predictable and easier
to use, and avoids the complex multiple nested command queues used by
source-file, if-shell and friends.

A mass rename of struct cmdq to a better name (cmdq_item probably) is
coming.
2016-10-16 17:55:14 +00:00
nicm
ed971268be Add CMD_AFTERHOOK flag to the easy commands that don't need any special handling. 2016-10-14 22:14:22 +00:00
nicm
325cbe90d9 Allow a command to be specified to display-panes, similar to
command-prompt, rather than always just selecting the pane.
2016-06-16 10:55:47 +00:00
nicm
995af0e2b7 I no longer use my SourceForge address so replace it. 2016-01-19 15:59:12 +00:00
nicm
a3129fd4e8 Instead of combined flags for -c, -s, -t, split into different sets
using an enum and simplify the parsing code.
2015-12-14 00:31:54 +00:00
nicm
ecfeee2e82 Use member names in cmd_entry definitions so I stop getting confused
about the order.
2015-12-13 21:53:57 +00:00
nicm
4a4daf1303 Instead of every command resolving the target (-t or -s) itself, prepare
the state (client, session, winlink, pane) for it it before entering the
command. Each command provides some flags that tell the prepare step
what it is expecting.

This is a requirement for having hooks on commands (for example, if you
hook "select-window -t1:2", the hook command should to operate on window
1:2 not whatever it thinks is the current window), and should allow some
other target improvements.

The old cmd_find_* functions remain for the moment but that layer will
be dropped later.

Joint work with Thomas Adam.
2015-12-13 14:32:38 +00:00
nicm
45dfc5a074 Instead of setting up the default keys by building the key struct
directly with a helper function in the cmd_entry, include a table of
bind-key commands and pass them through the command parser and a
temporary cmd_q.

As well as being smaller, this will allow default bindings to be command
sequences which will probably be needed soon.
2014-10-20 22:29:25 +00:00
nicm
d45c12b6c9 Remove the barely-used and unnecessary command check() function. 2013-10-10 12:00:18 +00:00
Nicholas Marriott
20636d956d Add a command queue to standardize and simplify commands that call other
commands and allow a command to block execution of subsequent
commands. This allows run-shell and if-shell to be synchronous which has
been much requested.

Each client has a default command queue and commands are consumed one at
a time from it. A command may suspend execution from the queue by
returning CMD_RETURN_WAIT and then resume it by calling cmd_continue() -
for example run-shell does this from the callback that is fired after
the job is freed.

When the command queue becomes empty, command clients are automatically
exited (unless attaching). A callback is also fired - this is used for
nested commands in, for example, if-shell which can block execution of
the client's cmdq until a new cmdq becomes empty.

Also merge all the old error/info/print functions together and lose the
old curclient/cmdclient distinction - a cmdq is bound to one client (or
none if in the configuration file), this is a command client if
c->session is NULL otherwise an attached client.
2013-03-24 09:54:10 +00:00
Nicholas Marriott
bb8457b166 Fix error reporting for client commands by adding a flag to
cmd_find_client to tell it whether or not to show errors, sometimes it's
needed and sometimes not.
2013-03-24 09:27:19 +00:00
Nicholas Marriott
ede8312d59 Make command exec functions return an enum rather than -1/0/1 values and
add a new value to mean "leave client running but don't attach" to fix
problems with using some commands in a command sequence. Most of the
work by Thomas Adam, problem reported by "jspenguin" on SF bug 3535531.
2012-07-11 07:10:15 +00:00
Nicholas Marriott
7502cb3adb Clean up and simplify tmux command argument parsing.
Originally, tmux commands were parsed in the client process into a
struct with the command data which was then serialised and sent to the
server to be executed. The parsing was later moved into the server (an
argv was sent from the client), but the parse step and intermediate
struct was kept.

This change removes that struct and the separate parse step. Argument
parsing and printing is now common to all commands (in arguments.c) with
each command left with just an optional check function (to validate the
arguments at parse time), the exec function and a function to set up any
key bindings (renamed from the old init function).

This is overall more simple and consistent.

There should be no changes to any commands behaviour or syntax although
as this touches every command please watch for any unexpected changes.
2011-01-04 00:42:46 +00:00
Nicholas Marriott
76ef8770cd Get rid of the ugly CMD_CHFLAG macro and use a const string (eg "dDU") in the
command entry structs and a couple of functions to check/set the flags.
2009-11-13 19:53:28 +00:00
Nicholas Marriott
04319964b9 Add a new display-panes command, with two options (display-panes-colour and
display-panes-time), which displays a visual indication of the number of each
pane.
2009-08-31 20:46:19 +00:00