split-window, respawn-window or respawn-pane, pass them directly to
execvp() to help avoid quoting problems. One argument still goes to "sh
-c" like before. Requested by many over the years. Patch from J Raynor.
irritating flaws:
a) The old way of always using the top or left if the choice is
ambiguous is annoying when the layout is unbalanced.
b) The new way of remembering the last used pane is annoying if the
layout is balanced and the leftmost is obvious to the user (because
clearly if we go right from the top-left in a tiled set of four we want
to end up in top-right, even if we were last using the bottom-right).
So instead, use a combination of both: if there is only one possible
pane alongside the current pane, move to it, otherwise choose the most
recently used of the choice.
options with a single foo-style option. For example:
set -g status-fg yellow
set -g status-bg red
set -g status-attr blink
Becomes:
set -g status-style fg=yellow,bg=red,blink
The -a flag to set can be used to add to rather than replace a style. So:
set -g status-bg red
Becomes:
set -ag status-style bg=red
Currently this is fully backwards compatible (all *-{fg,bg,attr} options
remain) but the plan is to deprecate them over time.
From Tiago Cunha.
descriptors rather than strings.
- Each session still has a current working directory.
- New sessions still get their working directory from the client that
created them or its attached session if any.
- New windows are created by default in the session working directory.
- The -c flag to new, neww, splitw allows the working directory to be
overridden.
- The -c flag to attach let's the session working directory be changed.
- The default-path option has been removed.
To get the equivalent to default-path '.', do:
bind c neww -c $PWD
To get the equivalent of default-path '~', do:
bind c neww -c ~
This also changes the client identify protocol to be a set of messages rather
than one as well as some other changes that should make it easier to make
backwards-compatible protocol changes in future.
When clearing WINLINK_ALERTFLAGS for all sessions, we must also, for
that window, clear the window->flags as well, otherwise sessions may
well still see flags for winlinks long since cleared.
This therefore introduces WINDOW_ALERTFLAGS to help with this.
rather than strings.
- Each session still has a current working directory.
- New sessions still get their working directory from the client that created
them or its attached session if any.
- New windows are created by default in the session working directory.
- The -c flag to new, neww, splitw allows the working directory to be
overridden.
- The -c flag to attach let's the session working directory be changed.
- The default-path option has been removed.
To get the equivalent to default-path '.', do:
bind c neww -c $PWD
To get the equivalent of default-path '', do:
bind c neww -c '#{pane_current_path}'
The equivalent of default-path '~' is left as an exercise for the reader.
This also changes the client identify protocol to be a set of messages rather
than one as well as some other changes that should make it easier to make
backwards-compatible protocol changes in future.
When clearing WINLINK_ALERTFLAGS for all sessions, we must also, for that
window, clear the window->flags as well, otherwise sessions may well still
see flags for winlinks long since cleared.
This therfore introduces WINDOW_ALERTFLAGS to help with this.
window or unzoom (restored to the normal layout) if it already zoomed,
bound to C-b z by default. The pane is unzoomed on pretty much any
excuse whatsoever.
We considered making this a new layout but the requirements are quite
different from layouts so decided it is better as a special case. Each
current layout cell is saved, a temporary one-cell layout generated and
all except the active pane set to NULL.
Prompted by suggestions and scripts from several. Thanks to Aaron Jensen
and Thiago Padilha for testing an earlier version.
or unzoom (restored to the normal layout) if it already zoomed, bound to C-b z
by default. The pane is unzoomed on pretty much any excuse whatsoever.
We considered making this a new layout but the requirements are quite different
from layouts so decided it is better as a special case. Each current layout
cell is saved, a temporary one-cell layout generated and all except the active
pane set to NULL.
Prompted by suggestions and scripts from several. Thanks to Aaron Jensen and
Thiago Padilha for testing an earlier version.
Fix up window reference counting and don't crash if the rename timer
fires while the window is dead but still referenced. Fixes problem
reported by Michael Scholz.
Instead of numbering choose mode items 0-9a-z and then nothing, number
them all and if there are more than 10 use a prompt when 0-9 is
pressed. From Thomas Adam.
Add a simple form of output rate limiting by counting the number of
certain C0 sequences (linefeeds, backspaces, carriage returns) and if it
exceeds a threshold (current default 50/millisecond), start to redraw
the pane every 100 milliseconds instead of making each change as it
comes. Two configuration options - c0-change-trigger and
c0-change-interval.
This makes tmux much more responsive under very fast output (for example
yes(1) or accidentally cat'ing a large file) but may not be perfect on
all terminals and connections - feedback very welcome, particularly
where this change has a negative rather than positive effect (making it
off by default is a possibility).
After much experimentation based originally on a request Robin Lee
Powell (which ended with a completely different solution), this idea
from discussion with Ailin Nemui.
certain C0 sequences (linefeeds, backspaces, carriage returns) and if it
exceeds a threshold (current default 50/millisecond), start to redraw
the pane every 100 milliseconds instead of making each change as it
comes. Two configuration options - c0-change-trigger and
c0-change-interval.
This makes tmux much more responsive under very fast output (for example
yes(1) or accidentally cat'ing a large file) but may not be perfect on
all terminals and connections - feedback very welcome, particularly
where this change has a negative rather than positive effect (making it
off by default is a possibility).
After much experimentation based originally on a request Robin Lee
Powell (which ended with a completely different solution), this idea
from discussion with Ailin Nemui.
Call bufferevent_free before closing file descriptor associated with it
or bugs in $EventMechanism on $OtherOS makes libevent get it's knickers
in a twist. From Dylan Alex Simon.
Date: 2011/06/05 11:53:05
Author: nicm
Branch: HEAD
Tag: (none)
Log:
Get rid of the layout string code which tries to walk through the layout
hierarchy and instead just look at what panes are actually in the window.
|Date: 2011/04/18 21:57:16
|Author: nicm
|Branch: HEAD
|Tag: (none)
|Log:
|The mouse should only work in copy mode if mode-mouse is set, not just
|mouse-select-pane.
Date: 2011/03/27 21:27:26
Author: nicm
Branch: HEAD
Tag: (none)
Log:
Give each pane created in a tmux server a unique id (starting from 0),
put it in the TMUX_PANE environment variable and accept it as a
target. Suggested by and with testing and tweaks from Ben Boeckel.
Move all calls to fcntl(...O_NONBLOCK) into a function and clear the
flag on the stdio file descriptors before closing them (fixes things
like "tmux ls && cat").
Date: 2010/11/14 08:58:25
Author: nicm
Branch: HEAD
Tag: (none)
Log:
Don't allow last and active window to become the same - a very bad move
when the active window is closed and freed. Reported by sthen@.
Members:
window.c:1.58->1.59
Do not call event_del() for signals after fork(), just use sigaction()
directly instead - calling libevent functions after fork() w/o
event_reinit() is a bad idea, even if in this case it was harmless.
function. We were only ever using the client to find the session anyway.
This allows send-key to work properly for manipulating copy mode from
outside tmux.
From Micah Cowan.
Make signal handler setup/teardown two common functions instead of six,
and reset SIGCHLD after fork to fix problems with some shells. From
Romain Francoise.
Instead of bailing out on the first configuration file error, carry on,
collecting all the errors, then start with the active window in more mode
displaying them.
Massive spaces->tabs and trailing whitespace cleanup, hopefully for the last
time now I've configured emacs to make them displayed in really annoying
colours...
Change status line drawing to create the window list in a separate screen and
then copy it into the status line screen. This allows UTF-8 in window names and
fixes some problems with #[] in window-status-format.
