Support xterm(1) cursor colour change sequences through terminfo(5) Cc
(set) and Cr (reset) extensions. Originally by Sean Estabrooks, tweaked
by me and Ailin Nemui.
Support setting the xterm clipboard when copying from copy mode using
the xterm escape sequence for the purpose (if xterm is configured to
allow it).
Written by and much discussed Ailin Nemui, guidance on
xterm/termcap/terminfo from Thomas Dickey.
Use the tsl and fsl terminfo(5) capabilities to update terminal title
and automatically fill them in on terminals with the XT capability
(which means their title setting is xterm-compatible). From hsim at
gmx.li.
the xterm escape sequence for the purpose (if xterm is configured to
allow it).
Written by and much discussed Ailin Nemui, guidance on
xterm/termcap/terminfo from Thomas Dickey.
|Date: 2011/03/27 21:36:19
|Author: nicm
|Branch: HEAD
|Tag: (none)
|Log:
|Set the terminal blocking again earlier, before sending the reset
|sequences.
Support passing through escape sequences to the underlying terminal by
using DCS with a "tmux;" prefix. Escape characters in the sequences must
be doubled. For example:
$ printf '\033Ptmux;\033\033]12;red\007\033\\'
Will pass \033]12;red\007 to the terminal (and change the cursor colour
in xterm). From Kevin Goodsell.
using DCS with a "tmux;" prefix. Escape characters in the sequences must
be doubled. For example:
$ printf '\033Ptmux;\033\033]12;red\007\033\\'
Will pass \033]12;red\007 to the terminal (and change the cursor colour
in xterm). From Kevin Goodsell.
Move all calls to fcntl(...O_NONBLOCK) into a function and clear the
flag on the stdio file descriptors before closing them (fixes things
like "tmux ls && cat").
Support for UTF-8 mouse input (\033[1005h). This was added in xterm 262
and supports larger terminals than the older way.
If the new mouse-utf8 option is on, UTF-8 mouse input is enabled for all
UTF-8 terminals. The option defaults to on if LANG etc are set in the
same manner as the utf8 option.
With help and based on code from hsim at gmx.li.
and supports larger terminals than the older way.
If the new mouse-utf8 option is on, UTF-8 mouse input is enabled for all
UTF-8 terminals. The option defaults to on if LANG etc are set in the
same manner as the utf8 option.
With help and based on code from hsim at gmx.li.
Date: 2010/11/22 21:13:13
Author: nicm
Branch: HEAD
Tag: (none)
Log:
There is somewhere that WINDOW_HIDDEN is getting set when it shouldn't
be and I can't find it, but the flag itself is a useless optimisation
that only applies to automatic-resize windows, so just dispose of it
entirely.
Fixes problems reported by Nicholas Riley.
Members:
resize.c:1.5->1.6
tmux.h:1.246->1.247
tty.c:1.92->1.93
be and I can't find it, but the flag itself is a useless optimisation
that only applies to automatic-resize windows, so just dispose of it
entirely.
Fixes problems reported by Nicholas Riley.
Use UTF-8 line drawing characters on UTF-8 terminals. Fixes some stupid
terminals (I'm looking at you, putty) which disable the vt100 ACS mode
switching sequences in UTF-8 mode.
Also on terminals without ACS at all, use ASCII equivalents where
obvious.
terminals (I'm looking at you, putty) which disable the vt100 ACS mode
switching sequences in UTF-8 mode.
Also on terminals without ACS at all, use ASCII equivalents where
obvious.
Change the way backoff works. Instead of stopping reading from the pty
when the client tty backs up too much, just stop updating the tty and
only update the internal screen. Then when the tty recovers, force a
redraw.
This prevents a dodgy client from causing other clients to go into
backoff while still allowing tmux to be responsive (locally) when seeing
lots of output.
when the client tty backs up too much, just stop updating the tty and
only update the internal screen. Then when the tty recovers, force a
redraw.
This prevents a dodgy client from causing other clients to go into
backoff while still allowing tmux to be responsive (locally) when seeing
lots of output.
Fix problems with window sizing seen by Raghavendra D Prabhu when
starting tmux from .xinitrc.
One of the very few things the server relies on the client for now is to
pass through a message on SIGWINCH, but there is a condition where
potentially a SIGWINCH may be lost during the transition from unattached
(main.c) to attached (client.c). So trigger a size change immediately
after the client installs its SIGWINCH handler.
Also, when the terminal is resized, reset the scroll region and cursor
position. Previously, we were clearing our saved idea of these, but in
fact some terminals do not reset them on resize, so this caused problems
during redraw.
While here make a resize to the same size not cause a redraw and rename
the tmux.out output log file to include the tmux PID.
When the mode-mouse option is on, support dragging to make a selection
in copy mode.
Also support the scroll wheel, although xterm strangely does not ignore
it in application mouse mode, causing redraw artifacts when scrolling up
(other terminals appear to be better behaved).
starting tmux from .xinitrc.
One of the very few things the server relies on the client for now is to
pass through a message on SIGWINCH, but there is a condition where
potentially a SIGWINCH may be lost during the transition from unattached
(main.c) to attached (client.c). So trigger a size change immediately
after the client installs its SIGWINCH handler.
Also, when the terminal is resized, reset the scroll region and cursor
position. Previously, we were clearing our saved idea of these, but in
fact some terminals do not reset them on resize, so this caused problems
during redraw.
While here make a resize to the same size not cause a redraw and rename
the tmux.out output log file to include the tmux PID.
in copy mode.
Also support the scroll wheel, although xterm strangely does not ignore
it in application mouse mode, causing redraw artifacts when scrolling up
(other terminals appear to be better behaved).
Check for colour and attribute modifications early so the translated
values can be stored in the cached terminal attributes rather than the
requested (untranslated) values. Prevents tmux clearing and setting the
attributes for every character when using aixterm colours.
values can be stored in the cached terminal attributes rather than the
requested (untranslated) values. Prevents tmux clearing and setting the
attributes for every character when using aixterm colours.
If redrawing line 0 of the screen onto the tty, there can't be a wrap flag on
the previous line, so move the cursor. Fixes status line redraw issues when
resizing in choose mode and hopefully at other times as well.
Massive spaces->tabs and trailing whitespace cleanup, hopefully for the last
time now I've configured emacs to make them displayed in really annoying
colours...
Cleanup by moving various (mostly horrible) little bits handling UTF-8 grid
data into functions in a new file, grid-utf8.c, and use sizeof intead of
UTF8_DATA.
Also nuke trailing whitespace from tmux.1, reminded by jmc.
Emulate the ri (reverse index) capability: this allows tmux to at least start
on Sun consoles (TERM=sun or sun-color), even if there appear to still be
problems on some boxes (my Blade 100 is fine but edd's Blade 1000 shows odd
screen corruption).
on Sun consoles (TERM=sun or sun-color), even if there appear to still be
problems on some boxes (my Blade 100 is fine but edd's Blade 1000 shows odd
screen corruption).
Clear to the end of the screen from the right starting point when drawing
line-by-line (in panes or if ed not supported). Fixes problem spotted by Frank
Terbeck.
Switch tty key input over to happen on a read event. This is a bit more
complicated because of escape input, but in that case instead of processing a
key immediately, schedule a timer and reprocess the bufer when it expires.
This currently assumes that keys will be atomic (ie that if eg F1 is pressed
the entire sequence is present in the buffer). This is usually but not always
true, a change in the tree format so it can differentiate potential (partial)
key sequences will happens soon and will allow this to be fixed.
complicated because of escape input, but in that case instead of processing a
key immediately, schedule a timer and reprocess the bufer when it expires.
This currently assumes that keys will be atomic (ie that if eg F1 is pressed
the entire sequence is present in the buffer). This is usually but not always
true, a change in the tree format so it can differentiate potential (partial)
key sequences will happens soon and will allow this to be fixed.
Setting SGR0 when setting the fg and bg has problems if only one of the two is
meant to be default, so rewrite the code to move this outside, move setting
colours before attributes and generally clean up.
Tested by sthen@, fixes problems he was seeing with mutt and should fix some
existing problems with (rarely) lost attributes.
Remove the -d flag to tmux and just use op/AX to detect default colours.
Irritatingly, although op can be used to tell if a terminal supports default
colours, it can't be used to set them because in some terminfo descriptions it
resets attributes as a side-effect (acts as sgr0) and in others it doesn't, so
it is not possible to determine reliably what the terminal state will be
afterwards. So if AX is missing and op is present, tmux just sends sgr0.
Anyone using -d for a terminal who finds they actually needed it can replace it
using terminal-overrides, but please let me know as it is probably an omission
from terminfo.
meant to be default, so rewrite the code to move this outside, move setting
colours before attributes and generally clean up.
Tested by sthen@, fixes problems he was seeing with mutt and should fix some
existing problems with (rarely) lost attributes.
Irritatingly, although op can be used to tell if a terminal supports default
colours, it can't be used to set them because in some terminfo descriptions it
resets attributes as a side-effect (acts as sgr0) and in others it doesn't, so
it is not possible to determine reliably what the terminal state will be
afterwards. So if AX is missing and op is present, tmux just sends sgr0.
Anyone using -d for a terminal who finds they actually needed it can replace it
using terminal-overrides, but please let me know as it is probably an omission
from terminfo.
Don't redraw the scroll region on linefeed/reverse index unless it is necessary
(the cursor is at the bottom/top). Should fix slow cursor movement when using
vi in a pane spotted by pirofti@.
Some terminals don't correctly clear their let's-wrap flag after changing the
scroll region (which moves the cursor to 0,0). This means that if the cursor
was at the edge of the screen, any further output after scroll region change
incorrectly causes a line wrap. Add a workaround to move the cursor to position
0 if it is at the screen edge before changing scroll region.
Try to reduce the UTF-8 mess.
Get rid of passing around u_char[4]s and define a struct utf8_data which has
character data, size (sequence length) and width. Move UTF-8 character
collection into two functions utf8_open/utf8_append in utf8.c which fill in
this struct and use these functions from input.c and the various functions in
screen-write.c.
Space for rather more data than is necessary for one UTF-8 sequence is in the
utf8_data struct because screen_write_copy is still nasty and needs to reinject
the character (after combining) into screen_write_cell.
UTF-8 combined character fixes.
Thai can have treble combinations (1 x width=1 then 2 x width=0) so bump the
UTF-8 cell data size to 9 and alter the code to allow this.
Also break off the combining code into a separate function, handle any further
combining beyond the buffer size by replacing the character with _s, and when
redrawing the UTF-8 character don't assume the first part has just been
printed, redraw the entire line.
Move the check for whether to force a line wrapper lower down into the tty code
where it has access to the tty width, which is what should have been checked.
Instead of having a complicated check to see if the cursor is in the last
position to avoid an explicit wrap, actually move it there.
Some UTF-8 fixes to come.
When checking whether the region will scroll and the cursor position is thus
unsuitable for using CUD/CUU, check the current cursor position not the target
position.
scroll region (which moves the cursor to 0,0). This means that if the cursor
was at the edge of the screen, any further output after scroll region change
incorrectly causes a line wrap. Add a workaround to move the cursor to position
0 if it is at the screen edge before changing scroll region.
Get rid of passing around u_char[4]s and define a struct utf8_data which has
character data, size (sequence length) and width. Move UTF-8 character
collection into two functions utf8_open/utf8_append in utf8.c which fill in
this struct and use these functions from input.c and the various functions in
screen-write.c.
Space for rather more data than is necessary for one UTF-8 sequence is in the
utf8_data struct because screen_write_copy is still nasty and needs to reinject
the character (after combining) into screen_write_cell.
Thai can have treble combinations (1 x width=1 then 2 x width=0) so bump the
UTF-8 cell data size to 9 and alter the code to allow this.
Also break off the combining code into a separate function, handle any further
combining beyond the buffer size by replacing the character with _s, and when
redrawing the UTF-8 character don't assume the first part has just been
printed, redraw the entire line.
When drawing lines that have wrapped naturally, don't force a newline but
permit them to wrap naturally again. This allows terminals that use this to
guess where lines start and end for eg mouse selecting (like xterm) to work
correctly.
This was another long-standing issue raised by several people over the last
while.
Thanks to martynas@ for much testing. This was not trivial to get right so
bringing it in for wider testing and adn to fix any further glitches in-tree.
Don't run through the column unchanged case if the row was unchanged but there
were no suitable optimisations, instead make it an else to fall through to
absolute addressing.
Use relative cursor movement instead of absolute when possible and when
supported by the terminal to reduce the size of the output data (generally
about 10-20%).
permit them to wrap naturally again. This allows terminals that use this to
guess where lines start and end for eg mouse selecting (like xterm) to work
correctly.
This was another long-standing issue raised by several people over the last
while.
Thanks to martynas@ for much testing. This was not trivial to get right so
bringing it in for wider testing and adn to fix any further glitches in-tree.
Like linefeed, don't set the scroll region for reverse index unless it will be
needed.
While here, also tidy up a couple of long lines and remove an extraneous blank.
Be less aggressive about turning the cursor off, only explicitly turn it off
when tmux is redrawing, otherwise leave in the state set by the application.
Support -c like sh(1) to execute a command, useful when tmux is a login
shell. Suggested by halex@.
This includes another protocol version increase (the last for now) so again
restart the tmux server before upgrading.
Remove the internal tmux locking and instead detach each client and run the
command specified by a new option "lock-command" (by default "lock -np") in
each client.
This means each terminal has to be unlocked individually but simplifies the
code and allows the system password to be used to unlock.
Note that the set-password command is gone, so it will need to be removed from
configuration files, and the -U command line flag has been removed.
This is the third protocol version change so again it is best to stop the tmux
server before upgrading.
