1b86f520ea
Nuke the utf8 and status-utf8 options and make tmux only a UTF-8
...
terminal. We still support non-UTF-8 terminals outside tmux, but inside
it is always UTF-8 (as when the utf8 and status-utf8 options were on).
2015-11-12 11:09:11 +00:00
a0f3999ce7
Remove the mouse_utf8_flag format as well.
2015-11-12 11:07:10 +00:00
00c34df186
Drop mouse-utf8 option and always turn on UTF-8 mouse if the client says
...
it supports UTF-8.
2015-11-11 23:23:33 +00:00
67c3a014b9
No more TMPDIR.
2015-10-27 14:51:35 +00:00
c582f7d177
space before punctuation;
2015-10-26 00:15:37 +00:00
e65306d8e7
Extend the modifiers allowed before formats: as well as the existing
...
#{=10:...} length limit, add #{t:...} to convert a time_t format to a
string, #{b:...} for basename and #{d:...} for dirname. Remove all the
foo_string time formats as they can now be replaced by "t:", for example
#{window_activity_string} becomes #{t:window_activity}.
2015-10-25 22:29:17 +00:00
14da999408
Format for scroll position, from Jorge Morante.
2015-10-23 16:02:21 +00:00
60ca29df64
client_key_table was missing.
2015-10-21 13:14:36 +00:00
901c2eb20a
Add copy-mode -e to exit copy mode when scrolling off the bottom, useful
...
for quick view of history, from Cam Hutchison.
2015-09-13 13:31:40 +00:00
cfabe30bec
Add session_last_attached time and format, from Sina Siadat.
2015-09-10 08:58:14 +00:00
675def0396
Remove the lock-server option which is a bit redundant, it isn't that
...
different without it.
2015-08-28 12:31:55 +00:00
13b7fd82c1
Rename left/right/up/down relative to active pane to add -of suffix
...
(left-of/right-of/etc) to remove conflict with left/right meaning
leftmost or rightmost pane. From Ben Boeckel.
2015-08-12 08:55:20 +00:00
d33adc4fd0
Make -q suppress ambiguous option warnings too, from Cam Hutchison.
2015-07-27 08:45:45 +00:00
92af3766ec
Add an option (history-file) for a file to save/restore command prompt
...
history, from Olof-Joachim Frahm.
2015-07-20 15:50:04 +00:00
d4ce210713
Correct the tsl/fsl sequence to ]0 not ]2 (from Marcel Korpel). While
...
here, Xr xterm and remove some advice about elinks that is better
elsewhere.
2015-07-20 10:34:11 +00:00
81069f66f9
Add a format to show if client is a control client. From Bruno Sutic.
2015-07-13 15:37:26 +00:00
6308c48efd
Add a -s flag to show-environment to output Bourne shell commands a la
...
ssh-agent. Mostly from Cam Hutchison with some changes by me.
2015-07-13 13:36:29 +00:00
164ba041c9
Remove a stray : and tweak paragraph.
2015-06-18 23:53:56 +00:00
85120b37ea
Change break-pane to take target and source panes (-t and -s) in line
...
with other commands, from Thomas Adam.
2015-06-17 19:56:08 +00:00
0ff335961e
Move the shuffle code from new-window -a into a function and add a -a
...
flag for move-window too. From Thomas Adam.
2015-06-17 16:50:28 +00:00
d96ab34019
Add window_activity format, from Thomas Adam based on a diff originally
...
from propos6 at gmail dot com.
2015-06-15 10:58:01 +00:00
29c29e7717
Add a format for client PID (client_pid) and server PID (pid). Diff for
...
client_pid from Thomas Adam.
2015-06-14 10:07:44 +00:00
c4e811e519
Add -E flag when attaching or switching client to bypass
...
update-environment, from Steven Lu.
2015-06-07 21:39:39 +00:00
4219939c10
Make it so that if a window or session target is prefixed with an =,
...
only an exact name or index match is accepted, no special character,
prefix match, or fnmatch.
2015-06-05 08:14:16 +00:00
dc0d34e137
tweak SYNOPSIS and usage();
2015-06-04 20:34:22 +00:00
4a6c06d6a9
Make unsetting a global option restore it to the default. Diff lying
...
around for a while, I have forgotten who suggested it :-/.
2015-06-04 14:29:33 +00:00
a863834574
Add support for a single "marked pane". There is one marked pane in the
...
server at a time; it may be toggled or cleared with select-pane -m and
-M (the border is highlighted). A new target '~' or '{marked}' specifies
the marked pane to commands and it is the default target for the
swap-pane and join-pane -s flag (this makes them much simpler to use -
mark the source pane and then change to the target pane to run swapp or
joinp).
2015-06-04 11:43:51 +00:00
379400cfa6
Move the jobs output cache into the formats code so that #() work more
...
generally (for example, again working in set-titles-string).
2015-05-27 13:28:04 +00:00
ec34439f9c
Add a session_alerts format which is a list of all the alerts in the
...
current session in symbolic form (something like "0!,4~,5!"). Use this
in the default set-titles-string. Prompted by a request from Jan ONDREJ.
2015-05-12 15:29:29 +00:00
e958db09a7
Add bell-action "other" to pass through bells in all windows except the
...
current, suggested by Jan ONDREJ.
2015-05-12 15:27:46 +00:00
44364d7112
Remove the c0-* options which never really worked satisfactorily. Going
...
to try something else...
2015-05-11 10:10:16 +00:00
c4a4bd6ac5
Move input parser structs into input.c (removing fairly useless
...
saved_cursor_[xy] formats as a side-effect).
2015-05-08 16:18:04 +00:00
31b1ab4852
Add a format window_linked which is 1 if a window has been linked
...
multiple times, also remove the default space in window_flags and use a
conditional to add it in window-status-format (this means additional
flags can be added in the option without extra spaces). From Thomas Adam
with tweaks by me.
2015-05-06 08:35:39 +00:00
7382ba82c5
If default-terminal is set to "screen" or "screen-*", emulate screen's
...
historical (incorrect) behaviour for SGR 3 and send smso
(standout). Previously, we would send sitm (italics) if the terminal
outside had it and smso otherwise. This was acceptably until recently
because xterm's terminfo entry lacked sitm, so most users got smso.
People who want italics should set default-terminal to the forthcoming
"tmux" entry (and be prepared to deal with it being missing on older
hosts).
As a side-effect this changes default-terminal to be a server rather
than a session option.
suggested by and ok naddy
2015-04-29 15:59:08 +00:00
771744426e
Add select-layout -o to undo the last layout change (apply the previously
...
set layout).
2015-04-28 10:43:13 +00:00
95195f5258
Rewrite of the target resolution internals to be simpler and more
...
consistent but with much less duplication, but keeping the same internal
API. Also adds more readable aliases for some of the special tokens used
in targets (eg "{start}" instead of "^"). Some behaviours may have
changed, for example prefix matches now happen before fnmatch.
2015-04-27 16:25:57 +00:00
93b2871cab
Do not die on USR1 if any of the socket parent directories are
...
missing. Reported by Robin Powell.
2015-04-21 22:32:40 +00:00
bded743706
Support for multiple key tables to commands to be bound to sequences of
...
keys. The default key bindings become the "prefix" table and -n the
"root" table. Keys may be bound in new tables with bind -T and
switch-client -T used to specify the table in which the next key should
be looked up. Based on a diff from Keith Amling.
2015-04-20 15:34:56 +00:00
8101f1ef16
tweak previous;
2015-04-19 22:10:30 +00:00
bf635e7741
Rewrite of tmux mouse support which was a mess. Instead of having
...
options for "mouse-this" and "mouse-that", mouse events may be bound as
keys and there is one option "mouse" that turns on mouse support
entirely (set -g mouse on).
See the new MOUSE SUPPORT section of the man page for description of the
key names and new flags (-t= to specify the pane or window under mouse
as a target, and send-keys -M to pass through a mouse event).
The default builtin bindings for the mouse are:
bind -n MouseDown1Pane select-pane -t=; send-keys -M
bind -n MouseDown1Status select-window -t=
bind -n MouseDrag1Pane copy-mode -M
bind -n MouseDrag1Border resize-pane -M
To get the effect of turning mode-mouse off, do:
unbind -n MouseDrag1Pane
unbind -temacs-copy MouseDrag1Pane
The old mouse options are now gone, set-option -q may be used to
suppress warnings if mixing configuration files.
2015-04-19 21:34:21 +00:00
ee123c2489
Support setting the default window and pane background colours (window
...
and active pane via window-style and window-active-style options, an
individual pane by a new select-pane -P flag). From J Raynor.
2015-04-19 21:05:27 +00:00
0cd55eb1e7
Add a -x flag to copy-selection, append-selection and start-named-buffer
...
to prevent it exiting copy mode after copying. From J Raynor with a few
tweaks by me.
2015-04-10 16:00:08 +00:00
009a5e4213
in the case -> in this case.
2015-04-10 07:23:14 +00:00
3aa72b42b2
Add a helper function to convert time, and add session_activity formats
...
(the latter from Takatoshi Matsumoto).
2015-03-31 17:58:36 +00:00
cd9ccbc1e9
set-titles-string now uses formats, not the status bits (so no #() for
...
now). Reported by landry.
2015-03-11 08:17:37 +00:00
83a8e1fd20
Move pane border options to window options rather than session, from Marc Finet.
2015-02-06 15:09:34 +00:00
be0ad01b7c
Add missing default bindings, from Theo Buehler.
2015-01-06 09:12:02 +00:00
7a0c94b28a
Add pane_dead_status for exit status of dead panes.
2014-12-09 19:23:35 +00:00
54ca7b230d
Add -F to if-shell to allow it to be used to check for format or option
...
values rather than executing a command.
2014-12-02 23:39:02 +00:00
575fd1e322
Permit option values to be used in formats.
2014-12-02 23:19:45 +00:00
d37f266524
Add -b to splitw like joinw, from Felix Rosencrantz.
2014-11-12 22:57:06 +00:00
3c12b477d3
V should be vi not emacs, also sort. From Theo Buehler.
2014-11-07 12:28:28 +00:00
e4bf1e5128
Add V for select line with vi(1) keys. From Juho Pohjala.
2014-11-06 09:17:25 +00:00
d24c9d7d3e
Do not put a space between status-left/status-right and the window list,
...
instead move the space into the defaults for the options (so status-left
now defaults to "[#S] ". From Balazs Kezes.
2014-11-05 23:15:11 +00:00
428b51e031
Add pane_input_off format, from Anish R Athalye.
2014-10-25 08:47:04 +00:00
f0b69c7711
Fix description of Ss and Se.
2014-10-18 20:28:19 +00:00
6610e89689
Top function key is F12 now.
2014-10-02 14:21:06 +00:00
304f86cdbb
Support ! for last pane.
2014-09-25 12:45:35 +00:00
9bda7e881a
Add window_last_flag and window_zoomed_flag. From John Morrissey.
2014-09-08 14:29:05 +00:00
8a473b5757
Fix typo (paneas -> panes).
2014-09-01 22:00:42 +00:00
f518a077b1
Add flags to selectp to enable and disable input to a pane, from Anish
...
Athalye.
2014-08-11 22:14:30 +00:00
c8efffb4db
Make -S- and -E- mean the start and end to capture-pane to avoid having
...
to faff around with huge numbers to get everything.
2014-06-20 10:46:59 +00:00
7160b8c2d5
Add some formats for pane bounds.
2014-05-27 12:49:36 +00:00
191f695bad
Change key-table to mode-table to allow for some future work. From Keith
...
Amling.
2014-05-14 06:45:35 +00:00
b3e8d440ed
If multiple arguments are given to new-session, new-window,
...
split-window, respawn-window or respawn-pane, pass them directly to
execvp() to help avoid quoting problems. One argument still goes to "sh
-c" like before. Requested by many over the years. Patch from J Raynor.
2014-05-13 08:08:32 +00:00
b1a06ef22e
Add a copy mode key binding to copy to a named buffer. From J Raynor.
2014-05-13 07:54:20 +00:00
3dbacbb62b
Add support for named buffers. If you don't name a buffer, things work
...
much as before - buffers are automatically named "buffer0000",
"buffer0001" and so on and ordered as a stack. Buffers can be named
explicitly when creating ("loadb -b foo" etc) or renamed ("setb -b
buffer0000 -n foo"). If buffers are named explicitly, they are not
deleted when buffer-limit is reached. Diff from J Raynor.
2014-05-13 07:34:35 +00:00
64613b9d41
#nnT went away a while ago, remove a leftover from the manpage.
2014-04-17 15:48:02 +00:00
2740490e27
Remove the "info" message mechanism, this was only used for about five
...
mostly useless and annoying messages. Change those commands to silence
on success like all the others. Still accept the -q command line flag
and "quiet" server option for now.
2014-04-17 07:55:43 +00:00
877bdb46ed
Extend the -q flag to set-option to suppress errors about unknown
...
options - this will allow options to be removed more easily.
2014-04-17 07:51:38 +00:00
992ef70fb6
Remove the monitor-content option and associated bits and bobs. It's
...
never worked very well. If there is a big demand for it to return, will
consider better ways to do it.
2014-04-17 07:36:45 +00:00
14a96df9ee
Remove the choose-list command to prepare for some later choose-* work.
2014-04-16 21:02:41 +00:00
252a7373d6
Support UTF-8 with choose-buffer, from Kosuke ASAMI. Also make
...
buffer_sample bigger to let it trim at window right edge.
2014-04-02 18:12:18 +00:00
b52b40b2bc
pane_start_path has gone away.
2014-04-02 07:55:09 +00:00
dca7d1c0fd
Make message-limit a server option.
2014-03-31 21:41:35 +00:00
0e4d1d8493
Add setb -a to append and a copy mode append command, from J Raynor with
...
minor changes.
2014-03-31 21:39:31 +00:00
b11de5adc7
Make session_attached a count and add session_many_attached flag.
2014-03-31 21:37:55 +00:00
f1828921df
Change terminal-overrides to a server option (now that we have them), it
...
doesn't make much sense as a session option.
2014-02-23 00:53:06 +00:00
81db6bab91
Leftovers from removing 88 colour support, from Theo Buehler.
2014-02-16 12:45:17 +00:00
973de5a704
fix some minor formatting glitches;
2014-02-02 08:48:48 +00:00
945339b443
Allow replacing each of the many sets of separate foo-{fg,bg,attr}
...
options with a single foo-style option. For example:
set -g status-fg yellow
set -g status-bg red
set -g status-attr blink
Becomes:
set -g status-style fg=yellow,bg=red,blink
The -a flag to set can be used to add to rather than replace a style. So:
set -g status-bg red
Becomes:
set -ag status-style bg=red
Currently this is fully backwards compatible (all *-{fg,bg,attr} options
remain) but the plan is to deprecate them over time.
From Tiago Cunha.
2014-01-28 23:07:09 +00:00
d23561f381
Merge server-info into show-messages and remove some not useful output.
2014-01-22 14:43:42 +00:00
1286c56188
Replace ## by # in format.
2013-11-24 11:29:09 +00:00
7fa55b0419
Key to swap to other end of selection (bound to o with vi keys), from J
...
Raynor.
2013-10-23 11:31:03 +00:00
17ec688ced
Bracket in the wrong place in description of c0-change-trigger.
2013-10-10 23:31:28 +00:00
d0566a474a
Remove the KERN_PROC_CWD the proc_current_path format (which is the only
...
thing that uses it now).
2013-10-10 12:39:24 +00:00
282c5f9644
Alter how tmux handles the working directory to internally use file
...
descriptors rather than strings.
- Each session still has a current working directory.
- New sessions still get their working directory from the client that
created them or its attached session if any.
- New windows are created by default in the session working directory.
- The -c flag to new, neww, splitw allows the working directory to be
overridden.
- The -c flag to attach let's the session working directory be changed.
- The default-path option has been removed.
To get the equivalent to default-path '.', do:
bind c neww -c $PWD
To get the equivalent of default-path '~', do:
bind c neww -c ~
This also changes the client identify protocol to be a set of messages rather
than one as well as some other changes that should make it easier to make
backwards-compatible protocol changes in future.
2013-10-10 12:26:34 +00:00
b822d24b15
Support -c for new-session, based on code from J Raynor.
2013-10-10 12:07:36 +00:00
40811eb8d4
Add length limit operator for formats.
2013-10-10 11:50:20 +00:00
d75dd2ab1c
Add formats for window flags.
2013-10-10 11:47:52 +00:00
7c71c3e27d
Change the default for the default-path option to ~. This is a quick
...
change to turn off the KERN_PROC_CWD code which is unpredictable. Later
it will go away and there may be other changes to how this works.
2013-10-05 13:56:48 +00:00
304ea079d2
use .Mt for email addresses; from Jan Stary <hans at stare dot cz>; ok jmc@
2013-07-16 00:07:52 +00:00
f5b041e394
Add pane_synchronized format, from Romain Francoise.
2013-07-05 15:27:14 +00:00
3977dba761
Focus events can cause trouble if left on and they can't be turned off
...
during idle periods (like the other states are) because we'd miss
events. So add a server option to control them. Defaults to off.
2013-06-23 13:10:46 +00:00
ddb52a2b15
escape "Ss", becuase groff thinks it has found a macro;
2013-06-02 14:40:17 +00:00
13441e8cb8
The actual terminfo entries we ended up with for cursor changes are Cs,
...
Ce, Ss and Se (not Cc, Ce, Cs, Csr). So use and document these instead
of the ones we were using earlier.
2013-06-02 07:52:15 +00:00
c231381aa3
Demote the old single-character replacement variables (#S and friends)
...
to aliases of formats. From Tiago Cunha.
2013-05-31 19:56:05 +00:00
c30d60f7ae
Add host_short format, from Tiago Cunha.
2013-05-31 19:46:42 +00:00
2555ac58cc
.Op Fl b not .Fl b for run-shell synopsis, from Ben Boeckel.
2013-04-24 10:15:47 +00:00
20f0d917be
Missed -o from set-window-option, from Ben Boeckel.
2013-04-10 12:07:18 +00:00
7f63658709
Add TMUX_TMPDIR variable to put the socket directory outside
...
TMPDIR. From Ben Boeckel.
2013-03-27 11:24:18 +00:00
e44bd9f750
Revert the command-prefix change which breaks sequences of commands.
2013-03-25 15:59:57 +00:00
4119c476aa
b comes before t.
2013-03-25 11:46:28 +00:00
6fee3e9e4b
Rename session idx to session id throughout and add $ prefix to targets
...
to use it, extended from a diff from George Nachman.
2013-03-25 10:11:45 +00:00
748acdc77c
Add wait-for -L and -U for lock and unlock, from Thiago Padilha.
2013-03-25 10:09:35 +00:00
14fad6a5cc
Add -A flag to new-session to make it behave like attach-session if the
...
session exists. If -A is used, -D behaves like -d to attach-session.
2013-03-24 09:58:40 +00:00
a05b8c4143
Add a -o option to set-option to prevent setting an option already set,
...
from Thiago Padilha.
2013-03-24 09:55:02 +00:00
66edb3392b
Expand format variables in the run-shell and if-shell shell commands,
...
from Thiago Padilha.
2013-03-24 09:33:35 +00:00
ac1fe83596
Couple of fixes pointed out by jmc.
2013-03-22 18:45:36 +00:00
702ab8bab0
Add a load of miscellaneous pane formats, from George Nachman.
2013-03-22 16:03:35 +00:00
8478895eeb
Add -e flag to capture-pane to include embedded ANSI SGR escape
...
sequences, from George Nachman.
2013-03-22 15:51:54 +00:00
f0efa576e0
Add resize-pane -x and -y for absolute pane size (much requested).
2013-03-22 10:37:39 +00:00
ad760b3bf7
Add client_session and client_last_session formats.
2013-03-22 10:32:36 +00:00
78543cce30
Support capture-pane -p to send to stdout.
2013-03-21 18:43:34 +00:00
55bf2ecc68
tweak previous; ok nicm
2013-03-21 17:42:36 +00:00
4920306486
Clarify choose-tree entry in man page.
2013-03-21 16:23:46 +00:00
180faf73af
Allow choose commands to be used outside tmux, so long as at least one
...
client is attached.
2013-03-21 16:09:59 +00:00
e33ba57c13
Remove the layout undo/redo code which never really worked.
2013-01-17 00:11:22 +00:00
bc2e4a36df
If timing between keys is less than (by default) 1 millisecond, assume
...
the text is being pasted. assume-paste-time option changes the value (0
disables). Based on a diff from Marcin Kulik.
2013-01-15 22:55:29 +00:00
854e8ae04d
Add ^ and $ special command targets to select lowest and highest
...
numbered windows, from Raghavendra D Prabhu.
2012-12-24 12:38:57 +00:00
4aa4e9fb26
Allow cmd-run-shell to accept -t to specify the pane to display the
...
output, requested by Alexander Tsepkov.
2012-11-27 15:09:35 +00:00
93224260ae
Add window-status-last-* options, from Boris Faure.
2012-11-27 13:52:23 +00:00
9a7e5bd1d3
Clarify some points about config files, notably that they are only read
...
at server start. From Thomas Adam.
2012-11-19 10:50:24 +00:00
589b4b8c6a
Fix typo bell->bells from Thomas Adam.
2012-10-25 11:11:58 +00:00
ea289bc457
Remove some out of date text from man page, from Thomas Adam.
2012-10-02 08:02:21 +00:00
7263fa36eb
add cmd-choose-list to allow arbitrary options to be selected. From
...
Thomas Adam.
2012-09-03 09:57:57 +00:00
cf2e65c0e2
Another missing format from sam at sltosis.org.
2012-08-11 07:10:01 +00:00
ff4097e02c
Add some missing formats from Samuel Le Thiec.
2012-08-11 05:55:12 +00:00
89a96b05fa
Document pane_index variable, from sam at sltosis dot org.
2012-07-15 06:51:57 +00:00
b0f4f94b5b
remove extraneous line;
2012-07-08 17:24:29 +00:00
f20c6fe009
Add choose-tree command to show windows and sessions in the same
...
list. Change choose-window and -session to use the same code. From
Thomas Adam.
2012-07-08 16:04:38 +00:00
2113115cdd
Add -a for kill-session, from Thomas Adam.
2012-06-18 09:16:15 +00:00
038e8b770d
Add -a flag for detach-client, from Thomas Adam.
2012-06-18 09:15:22 +00:00
04ac61ecd7
Simplify references to alerts in the man page, from Thomas Adam.
2012-06-18 09:13:12 +00:00
ebf94bc9cb
Switch all of the various choose- and list- commands over to the format
...
infrastructure, from Thomas Adam.
2012-05-22 11:35:37 +00:00
ac7e2f13e9
Ignore line continuation when escaped as \\, from Simon Nicolussi.
2012-05-17 21:21:31 +00:00
cc979bda0f
default-path has the same possibilities as new-window -c now.
2012-05-02 19:29:13 +00:00
a6c22d650b
Add a flag to move-window to renumber the windows in a session (closing
...
any gaps) and add an option to do this automatically each time a window
is killed. From Thomas Adam.
2012-04-29 17:20:01 +00:00
e02d1bce98
Add window-status-separator option, from Thomas Adam.
2012-04-23 22:23:14 +00:00
ed58b2d353
Add -a flag to kill-window, from Thomas Adam.
2012-04-23 22:10:45 +00:00
85f5485cb5
Add a layout history which can be stepped through with select-layout -u
...
and -U commands (bound to 'u' and 'U' by default).
2012-04-01 13:18:38 +00:00
b831f86354
Add pane_current_path format, suggested by Mikolaj Kucharski.
2012-04-01 10:42:39 +00:00
c0cfbe12e4
Accept an argument to show-environment to show one variable, based on a
...
diff from Kazuhiko Sakaguchi.
2012-03-22 11:11:57 +00:00
90bf560fe4
Add -C -N -T flags to find-window to find in content, name, title. From
...
Jonathan Daugherty.
2012-03-20 17:09:48 +00:00
01f2b5d64b
50 is a too low trigger default on larger terminals, bump to 250.
2012-03-20 11:23:12 +00:00
f59971276a
Add a simple form of output rate limiting by counting the number of
...
certain C0 sequences (linefeeds, backspaces, carriage returns) and if it
exceeds a threshold (current default 50/millisecond), start to redraw
the pane every 100 milliseconds instead of making each change as it
comes. Two configuration options - c0-change-trigger and
c0-change-interval.
This makes tmux much more responsive under very fast output (for example
yes(1) or accidentally cat'ing a large file) but may not be perfect on
all terminals and connections - feedback very welcome, particularly
where this change has a negative rather than positive effect (making it
off by default is a possibility).
After much experimentation based originally on a request Robin Lee
Powell (which ended with a completely different solution), this idea
from discussion with Ailin Nemui.
2012-03-20 11:01:00 +00:00
95f48a219a
Add a wrap-search option to turn off wrapping of searches in copy
...
mode. From Jacobo de Vera.
2012-03-17 21:40:53 +00:00
f152379e5a
Add -q option to set-option to turn off info message, from marcel partap.
2012-03-17 21:33:33 +00:00
4e05a2c0ae
Add -P/-F flags to break-pane too, from George Nachman.
2012-03-12 13:31:09 +00:00
03dca66ae2
Add -F format to new-window and split-window to use with the -P flag,
...
from George Nachman.
2012-03-04 20:50:53 +00:00
f4fdddc930
Support "bracketed paste" mode. This adds a -p flag to paste-buffer - if
...
this is used and the application has requested bracketed pastes, then
tmux surrounds the pasted text by \033[200~ and \033[201~. Applications
like vim can (apparently) use this to avoid, for example, indenting the
text. From Ailin Nemui.
2012-03-03 09:43:22 +00:00
07ac16807f
Add move-pane command (like join-pane but allows the same window). Also
...
-b flag to join-pane and move-pane to place the pane to the left or
above. From George Nachman.
2012-03-03 08:31:18 +00:00
4e7de210e4
Allow a single option to be specified to show-options to show just that
...
option.
2012-02-25 12:57:42 +00:00
aaf0bfccf4
Use format for display-message, based on a diff from George Nachman.
2012-02-23 22:40:58 +00:00
fe7cf0ba90
Document option values, particularly that omitting on|off for a flag is
...
a toggle.
2012-02-02 22:33:05 +00:00
efb639e1d2
Add -l flag to send-keys to send input literally (without translating
...
key names). From Frank Terbeck.
2012-02-02 00:15:28 +00:00
908a22e41c
Provide defined ways to set the various default-path possibilities: ~
...
for home directory, . for server start directory, - for session start
directory and empty for the pane's working directory (the default). All
can also be used as part of a relative path (eg -/foo). Also provide -c
flags to neww and splitw to override default-path setting.
Based on a diff from sthen. ok sthen
2012-01-31 15:52:21 +00:00
677ed3e5f0
id -> ID; ok nicm
2012-01-30 20:48:28 +00:00
0e59bc75fd
Give each window a unique id, like panes but prefixed with @. Based on
...
work from George Nachman.
2012-01-30 09:39:34 +00:00
230d0fbc9e
Add an option to move the status line to the top of the screen,
...
requested by many.
2012-01-29 09:37:02 +00:00
e870a3f3ec
it's -> its.
2012-01-21 20:40:28 +00:00
535286c05a
Drop the ability to have a list of keys in the prefix in favour of two
...
separate options, prefix and prefix2. This simplifies the code and gets
rid the data options type which was only used for this one option.
Also add a -2 flag to send-prefix to send the secondary prefix key,
fixing a cause of minor irritation.
People who want three prefix keys are out of luck :-).
2012-01-21 08:40:09 +00:00
7f24020cbe
Add strings to allow the aixterm bright colours to be used when
...
configuring colours, requested by Elliott Cable a few months ago.
2012-01-21 08:23:12 +00:00
66f04514cf
Add a -R flag to send-keys to reset the terminal. Written ages ago and
...
Suggested by someone, I forget who.
2012-01-21 08:10:21 +00:00
8cf19ab770
Add some trivial additional status line attributes from jwcxz at users
...
dot sourceforge dot net.
2012-01-20 19:51:28 +00:00
199d148740
Remove trailing spaces.
2012-01-20 19:16:16 +00:00
dcad13155b
Add an option to disable the window rename escape sequence, from Romain
...
Francoise.
2012-01-20 19:15:40 +00:00
eeaf92ad06
Add a man page section on window names and pane titles, from Felix
...
Rosencrantz.
2011-12-31 03:40:15 +00:00
16f9667620
Show how to set default-path to revert to tmux's old behaviour of opening
...
new windows in the current working directory at the time tmux was started,
it's not obvious. naddy@ agrees this is a useful inclusion.
2011-12-30 14:59:13 +00:00
fdd1d0b72e
Allow $HOME as default-path in tmux.conf so the same config file can be used
...
on different machines regardless of where the user's home directory is.
ok nicm
2011-12-27 14:07:20 +00:00
da145e7c20
formatting errors, found using freebsd's "igor";
2011-12-24 08:46:48 +00:00
f308ba93aa
Change the way the working directory for new processes is discovered. If
...
default-path isn't empty, it is used. Otherwise:
1) If tmux neww is run from the command line, the working directory of the
client is used.
2) Otherwise sysctl KERN_PROC_CWD is used to retrieve the current
working directory of the process in the active pane.
3) If that fails, the directory where the session was created is used.
Support code by Romain Francois, OpenBSD specific bits by me.
Note this requires a recent userland and kernel with KERN_PROC_CWD.
2011-12-09 16:28:18 +00:00
e04d13f6a6
Support "jump to" like vi in copy mode using t and T keys. Also add x
...
and X for delete in edit mode.
From Ben Boeckel, thanks.
2011-12-04 16:18:01 +00:00
fd25d35868
Move word-separators to be a session rather than window option, from Ben
...
Boeckel.
2011-11-15 23:24:04 +00:00
6c1c304fc3
Missing bits for new keys and buffer indexes, from Tiago Cunha
2011-11-05 09:13:00 +00:00
e5bf63cb59
Option to change status line (message) background when using vi keys and
...
in command mode. From Ben Boeckel.
2011-11-05 09:06:31 +00:00
e5d6df8979
minor formatting fix;
2011-10-27 23:33:35 +00:00
5ed3daf28b
Didn't really think the else behaviour through - requiring argv to
...
contain "else" is silly so just omit that, also some manpage
tweaks. From Tiago Cunha.
2011-10-27 22:40:15 +00:00
16d75a6bf2
Add client formats, from Ben Boeckel.
2011-10-23 01:12:46 +00:00
49ef0b4af3
Add a few more formats for panes (tty, pid, start cmd/cwd).
2011-10-02 06:55:48 +00:00
b1ed2d5bd9
Add -S option to refresh-client to redraw status line, from Marco Beck.
2011-09-28 20:11:21 +00:00
f14da260c8
Tweaks to the format parts, from Tiago Cunha.
2011-09-23 18:33:43 +00:00
2888843a18
tweak previous;
2011-08-26 13:07:49 +00:00
4a5dff3f11
Add initial framework for more powerful formatting of command output and
...
use it for list-{panes,windows,sessions}. This allows more descriptive
replacements (such as #{session_name}) and conditionals.
Later this will be used for status_replace and list-keys and other
places.
2011-08-26 10:53:16 +00:00
0588168a64
Support \ for line continuation in the configuration file, from Julius
...
Plenz.
2011-08-24 10:46:01 +00:00
f01b7191a3
Add pane-base-index option, from Ben Barbour.
2011-08-24 10:29:57 +00:00
88e9079870
Add a -r flag to switch-client to toggle the client read-only flag. From
...
Johan Commelin.
2011-08-16 10:00:52 +00:00
cf90f2a29c
fix error in previous;
2011-07-30 18:27:57 +00:00
cc5bcbfb59
Extend the mode-mouse option to add a third choice which means the mouse
...
does not enter copy mode. Patch from SF bug 3374493.
In future the mode-mouse option is likely to die and be broken into
several smaller options.
2011-07-30 18:01:26 +00:00
0252796a57
Sort options alphabetically, from Tiago Cunha.
2011-07-25 09:57:28 +00:00
2de9b1e005
Make confirm-before prompt customizable with -p option like
...
command-prompt. Also move responsibility for calling status_replace into
status_prompt_{set,update} and add #W and #P to the default kill-window
and kill-pane prompts. By Tiago Cunha.
2011-07-08 06:37:57 +00:00
f12158bc25
Add an option to trigger the terminal bell when there is an alert, from
...
Marco Beck.
2011-07-03 19:07:54 +00:00
94f86edfee
Include the existing window and session name in the prompt when renaming
...
and add a new key binding ($) for rename session. From Tiago Cunha.
2011-07-03 18:18:15 +00:00
ad60a2c952
Allow the initial context on prompts to be set with the new -I option to
...
command-prompt. From Tiago Cunha.
2011-07-02 21:05:44 +00:00
65177b82be
Add a respawn-pane command, from Marcel Partap.
2011-06-05 11:19:03 +00:00
f537870909
Fix a typo, spotted by Michal Mazurek..
2011-05-30 21:02:28 +00:00
240cae4c92
tweak the TERMINFO section; ok nicm
2011-05-21 10:04:17 +00:00
1af2021de6
Pass prompts through status_replace so that they can be more helpful
...
(such as showing the previous session name when renaming). From Tiago
Cunha.
2011-05-20 19:29:13 +00:00
3ea5e06bfb
Support DECSCUSR sequence to set the cursor style with two new
...
terminfo(5) extensions, Cs and Csr. Written by Ailin Nemui.
2011-05-20 19:17:39 +00:00
944b5e6fa0
Support xterm(1) cursor colour change sequences through terminfo(5) Cc
...
(set) and Cr (reset) extensions. Originally by Sean Estabrooks, tweaked
by me and Ailin Nemui.
2011-05-20 19:03:58 +00:00
nicm