Commit Graph

191 Commits

Author SHA1 Message Date
nicm
205d15e82d All these return values from utf8_* are confusing, use an enum. 2015-11-14 11:45:43 +00:00
nicm
64333e3ef8 Be more strict about invalid UTF-8. 2015-11-14 10:56:31 +00:00
nicm
908e6bb68f Log more of UTF-8 input. 2015-11-14 08:25:12 +00:00
nicm
c5689a5a40 Long overdue change to the way we store cells in the grid: now, instead
of storing a full grid_cell with UTF-8 data and everything, store a new
type grid_cell_entry. This can either be the cell itself (for ASCII
cells), or an offset into an extended array (per line) for UTF-8
data.

This avoid a large (8 byte) overhead on non-UTF-8 cells (by far the
majority for most users) without the complexity of the shadow array we
had before. Grid memory without any UTF-8 is about half.

The disadvantage that cells can no longer be modified in place and need
to be copied out of the grid and back but it turned out to be lot less
complicated than I expected.
2015-11-13 08:09:28 +00:00
nicm
1b86f520ea Nuke the utf8 and status-utf8 options and make tmux only a UTF-8
terminal. We still support non-UTF-8 terminals outside tmux, but inside
it is always UTF-8 (as when the utf8 and status-utf8 options were on).
2015-11-12 11:09:11 +00:00
nicm
44657bf932 Move struct options into options.c. 2015-10-27 15:58:42 +00:00
nicm
6c10fc659a Log pane which received input data. 2015-09-02 17:52:57 +00:00
nicm
93b946ee50 Tweak some error messages/comments. 2015-09-01 19:50:09 +00:00
nicm
66a2720c56 Log the whole new input buffer once rather than each byte. 2015-09-01 19:16:00 +00:00
nicm
b5aaefc727 Move alerts onto events rather than checking every loop. 2015-08-29 08:30:54 +00:00
nicm
fc58e44f89 Only do the automatic-rename dance if the pane has changed (seen output,
or new active pane).
2015-08-28 07:49:24 +00:00
nicm
2ffbd5b5f0 When searching for tabs, start from screen width, fixes out-of-bounds
read found by Kuang-che Wu.
2015-08-25 15:00:05 +00:00
nicm
8dcea2cc14 Reset G0/G1 state when resetting everything else with send-keys -R. 2015-07-13 18:45:18 +00:00
nicm
d96ab34019 Add window_activity format, from Thomas Adam based on a diff originally
from propos6 at gmail dot com.
2015-06-15 10:58:01 +00:00
nicm
55b96a5bd5 Handle the RGB colour escape sequence (\033[38;2;<r>;<g>;<b>m and 48;2)
like xterm(1) does, by mapping to the nearest in the 256 colour palette.
2015-06-05 22:33:39 +00:00
nicm
a3edfd9e84 teminal -> terminal, from Corey Farwell. 2015-06-04 09:42:29 +00:00
nicm
a3c6172495 Missing t at end of response, from Vincent Bernat. 2015-06-01 13:59:57 +00:00
nicm
44364d7112 Remove the c0-* options which never really worked satisfactorily. Going
to try something else...
2015-05-11 10:10:16 +00:00
nicm
c4a4bd6ac5 Move input parser structs into input.c (removing fairly useless
saved_cursor_[xy] formats as a side-effect).
2015-05-08 16:18:04 +00:00
nicm
02df86079b Fix some format specifier nits, from Ben Boeckel. 2015-03-31 17:45:10 +00:00
nicm
16bdd970dc Support blinking cursor mode, both the xterm CSI ?12 h/l and (the
backwards) screen CSI 34 h/l. From Guanpeng Xu.
2015-01-20 08:18:04 +00:00
nicm
a27ba6e380 Add xreallocarray and remove nmemb argument from xrealloc. 2014-10-08 17:35:58 +00:00
nicm
1ac96200a7 Remove support for the continuous reporting "any" mouse mode which never
really worked properly and is rarely used.
2014-08-09 07:33:37 +00:00
nicm
21ade85f24 Properly track switching G0 and G1 modes between US-ASCII and VT100 line
drawing rather than just treating them as SO and SI.
2014-06-06 13:21:41 +00:00
nicm
ada75af199 Don't limit the DCS buffer to 256 bytes, expand it as needed. Requested
by Suraj Kurapati.
2014-04-17 12:43:38 +00:00
nicm
04f469a324 Change secondary device attributes response to \033[>84;0;0c which is
unique for tmux.
2014-03-31 21:32:00 +00:00
nicm
1935eb5c1e Add \033[18t window operations from J Raynor. 2014-01-31 11:17:20 +00:00
nicm
81a548bcc4 Accept multiple parameters to SM/RM/DECSET/DECRST, based on a diff from
Hayaki Saito.
2013-10-10 11:57:14 +00:00
Nicholas Marriott
a41cd8d75b Always push a focus event when the application turns it on, prompted by
discussion with Hayaki Saito a while ago.
2013-06-23 12:51:28 +00:00
Nicholas Marriott
1ec4354998 Add support for focus notifications when tmux pane changes, based on
work by Aaron Jensen.
2013-03-24 09:18:16 +00:00
Nicholas Marriott
ad5df9bc2f Implement DECAWM (SM/RM 7) using existing MODE_WRAP flag. 2013-03-22 10:36:53 +00:00
Nicholas Marriott
67b4d5b609 Support the latest theory for mouse input, this is enabled/disabled with
SM/RM 1006 and is similar in style to SGR input: \033[<b;x;yM or
\033[b;x;ym. From Egmont Koblinger.
2013-03-22 10:33:50 +00:00
Nicholas Marriott
10682b9e7e Instead of loads of little screen_write_*_on and off functions which
just change mode flags, just have screen_write_mode_set and
screen_write_mode_clear.
2013-03-21 18:47:56 +00:00
Nicholas Marriott
fdbfc7e349 Rather than having two grids for each pane, one for ASCII and one for
UTF-8, collapse the two together. Simplifies the code at the expense of
more memory (which can probably be reduced again later).
2013-01-18 02:16:21 +00:00
Nicholas Marriott
3a09e01a8e Do not allow cursor colours to be set beginning with ? as that will
report the colour, from Hayaki Saito.
2013-01-17 20:30:43 +00:00
Nicholas Marriott
44f8e1caff Implement ECH (erase character, CSI X). Reported by Christian Neukirchen. 2013-01-15 23:18:55 +00:00
Nicholas Marriott
24d7d073ff Support the 47 and 1047 SM and RM sequences (alternate screen without
cursor), requested by I forget who ages ago.
2012-11-27 20:08:42 +00:00
Nicholas Marriott
17bbf90393 Add notification for input from a pane, from George Nachman. 2012-09-25 07:41:22 +00:00
Nicholas Marriott
df912e3540 xfree is not particularly helpful, remove it. From Thomas Adam. 2012-07-10 11:53:01 +00:00
Nicholas Marriott
ff5155f719 Add a buffer with all input from last ground state, will be used for
control mode. From George Nachman.
2012-04-25 21:12:49 +00:00
Nicholas Marriott
f59971276a Add a simple form of output rate limiting by counting the number of
certain C0 sequences (linefeeds, backspaces, carriage returns) and if it
exceeds a threshold (current default 50/millisecond), start to redraw
the pane every 100 milliseconds instead of making each change as it
comes. Two configuration options - c0-change-trigger and
c0-change-interval.

This makes tmux much more responsive under very fast output (for example
yes(1) or accidentally cat'ing a large file) but may not be perfect on
all terminals and connections - feedback very welcome, particularly
where this change has a negative rather than positive effect (making it
off by default is a possibility).

After much experimentation based originally on a request Robin Lee
Powell (which ended with a completely different solution), this idea
from discussion with Ailin Nemui.
2012-03-20 11:01:00 +00:00
Nicholas Marriott
523ed3873d Respond to secondary DA requests. 2012-03-15 10:05:49 +00:00
Nicholas Marriott
f4fdddc930 Support "bracketed paste" mode. This adds a -p flag to paste-buffer - if
this is used and the application has requested bracketed pastes, then
tmux surrounds the pasted text by \033[200~ and \033[201~. Applications
like vim can (apparently) use this to avoid, for example, indenting the
text. From Ailin Nemui.
2012-03-03 09:43:22 +00:00
Nicholas Marriott
8363d19307 Move window name changes into wrapper function window_set_name, from
George Nachman.
2012-02-02 00:10:11 +00:00
Nicholas Marriott
7f24020cbe Add strings to allow the aixterm bright colours to be used when
configuring colours, requested by Elliott Cable a few months ago.
2012-01-21 08:23:12 +00:00
Nicholas Marriott
be7b56a613 One day I will actually fix ALL the warnings before I commit... 2012-01-21 08:12:03 +00:00
Nicholas Marriott
66f04514cf Add a -R flag to send-keys to reset the terminal. Written ages ago and
Suggested by someone, I forget who.
2012-01-21 08:10:21 +00:00
Nicholas Marriott
dcad13155b Add an option to disable the window rename escape sequence, from Romain
Francoise.
2012-01-20 19:15:40 +00:00
Nicholas Marriott
92aef64c5a Add CNL and CPL escape sequences. 2011-12-29 08:06:24 +00:00
Nicholas Marriott
d377a68593 Add \033[s and \033[u to save and restore cursor position. 2011-12-27 14:06:19 +00:00
Nicholas Marriott
f0aad68aee Support for \e[3J to clear the history. Also send the corresponding
terminfo code (E3) before locking.
2011-10-23 10:16:14 +00:00
Nicholas Marriott
b4b3d9c936 Fix a couple of comments. 2011-07-08 06:28:05 +00:00
Nicholas Marriott
3ea5e06bfb Support DECSCUSR sequence to set the cursor style with two new
terminfo(5) extensions, Cs and Csr. Written by Ailin Nemui.
2011-05-20 19:17:39 +00:00
Nicholas Marriott
944b5e6fa0 Support xterm(1) cursor colour change sequences through terminfo(5) Cc
(set) and Cr (reset) extensions. Originally by Sean Estabrooks, tweaked
by me and Ailin Nemui.
2011-05-20 19:03:58 +00:00
Nicholas Marriott
79e30daeae Support passing through escape sequences to the underlying terminal by
using DCS with a "tmux;" prefix. Escape characters in the sequences must
be doubled. For example:

$ printf '\033Ptmux;\033\033]12;red\007\033\\'

Will pass \033]12;red\007 to the terminal (and change the cursor colour
in xterm). From Kevin Goodsell.
2011-03-07 23:46:27 +00:00
Nicholas Marriott
c36f67a288 Fix a typo that meant we did not reset the background colour when it was
omitted in a 256-colour SGR ([48;5m). From Yusuke ENDOH.
2011-03-03 08:53:14 +00:00
Nicholas Marriott
b6bb350289 Use input_clear to reset the APC, DCS, OSC state or it could be reused
improperly by a later state. From Kevin Goodsell.
2011-01-28 20:39:22 +00:00
Nicholas Marriott
8f8e81c0c9 Mouse highlight mode (1001) requires a program to cooperate so
supporting it through tmux is not as easy as this, remove it for now.
2011-01-15 00:16:00 +00:00
Nicholas Marriott
ac3b78a841 Support for UTF-8 mouse input (\033[1005h). This was added in xterm 262
and supports larger terminals than the older way.

If the new mouse-utf8 option is on, UTF-8 mouse input is enabled for all
UTF-8 terminals. The option defaults to on if LANG etc are set in the
same manner as the utf8 option.

With help and based on code from hsim at gmx.li.
2011-01-03 23:35:21 +00:00
Nicholas Marriott
f7c42c21ba Support all four of the xterm mouse modes. Based on a diff from hsim at
gmx.li.
2010-12-29 21:49:06 +00:00
Nicholas Marriott
6fd2b5b87f Style tweaks. 2010-12-23 20:18:39 +00:00
Nicholas Marriott
e26a351865 Add an option to alert (monitor) for silence (lack of activity) in a
window. From Thomas Adam.
2010-12-06 22:51:02 +00:00
Nicholas Marriott
622593a77f Fix typo in escape state table leading to fatal() when \033} or \033~
was entered, from Chris Johnsen.
2010-04-17 23:31:09 +00:00
Nicholas Marriott
4baafd8126 New input parser based on http://vt100.net/emu/dec_ansi_parser. 2010-03-22 19:02:54 +00:00
Nicholas Marriott
11dedde511 Add an option to disable the smcup/rmcup alternate screen behaviour inside
tmux. From clemens fischer.
2010-02-08 00:14:38 +00:00
Nicholas Marriott
ad8509f361 Correctly clear 256-colour flag for aixterm colours. 2010-01-06 23:13:52 +00:00
Nicholas Marriott
0dda866679 Pass through the aixterm bright colours if the terminal supports them (>= 16
colours).
2009-12-14 21:33:38 +00:00
Nicholas Marriott
15a64b805e Massive spaces->tabs and trailing whitespace cleanup, hopefully for the last
time now I've configured emacs to make them displayed in really annoying
colours...
2009-12-03 22:50:09 +00:00
Nicholas Marriott
2182e1badc Add a couple of comments. 2009-11-27 09:41:03 +00:00
Nicholas Marriott
a02c7e804c Convert the window pane (pty master side) fd over to use a bufferevent.
The evbuffer API is very similar to the existing tmux buffer API so this was
remarkably painless. Not many possible ways to do it, I suppose.
2009-11-04 22:43:11 +00:00
Theo Deraadt
ed62d1263c tabs are better; ok nicm 2009-10-26 21:42:04 +00:00
Nicholas Marriott
c2b8f3b55a Support the bright fg/bg colour SGR 90-97 and 100-107.
Reported by Tim Allen.
2009-10-23 15:48:39 +00:00
Nicholas Marriott
9afb0d739e %zu not %u, doh. 2009-10-20 22:17:33 +00:00
Nicholas Marriott
1af09d6330 Try to reduce the UTF-8 mess.
Get rid of passing around u_char[4]s and define a struct utf8_data which has
character data, size (sequence length) and width. Move UTF-8 character
collection into two functions utf8_open/utf8_append in utf8.c which fill in
this struct and use these functions from input.c and the various functions in
screen-write.c.

Space for rather more data than is necessary for one UTF-8 sequence is in the
utf8_data struct because screen_write_copy is still nasty and needs to reinject
the character (after combining) into screen_write_cell.
2009-10-20 19:18:28 +00:00
Nicholas Marriott
71dc6e04e8 Handle DECCOLM by just emulating its side-effect of clearing the screen. 2009-10-13 15:23:13 +00:00
Nicholas Marriott
8608c6970d When backspace is received at the beginning of a line and the previous line was
wrapped, move the cursor back up to the end of the previous line.

Another one of the forgotten persons requested this quite a while ago (I need
to start noting names on todo items...) when it was quite hard to
implement. Now it is easy and I don't see it can do any harm, so hey presto...
2009-10-12 16:59:55 +00:00
Nicholas Marriott
234ad54b2c Nuke unused variable. 2009-08-20 10:48:25 +00:00
Nicholas Marriott
bf121f7c60 Handle the device attributes (DA) escape sequence. 2009-08-19 17:00:31 +00:00
Nicholas Marriott
036de0c5e4 Instead of just checking for an empty buffer, which may not be the case if
there is unconsumed data, save the previous size and use it instead. This means
that activity monitoring should work in this (unlikely) event.

Also remove a debugging statement that no longer seems necessary.
2009-08-18 21:41:13 +00:00
Nicholas Marriott
06ddd3dcf8 Add a flags member to the grid_line struct and use it to differentiate lines
wrapped at the screen edge from those terminated by a newline. Then use this
when copying to combine wrapped lines together into one.
2009-08-08 15:57:49 +00:00
Nicholas Marriott
04e97e8aef Using the alternative screen (smcup/rmcup) should also preserve the current
colours and attributes. Found thanks to a report from Taylor Venable.

While here also nuke a couple of extra blank lines.
2009-08-07 00:12:13 +00:00
Nicholas Marriott
76a9d98562 Make some functions which return unused values void (mostly found by lint) and
tweak a redundant expression in window_pane_set_mode.
2009-07-21 19:54:22 +00:00
Nicholas Marriott
359285928b Support "alternate screen" mode (terminfo smcup/rmcup) typically used by full
screen interactive programs to preserve the screen contents. When activated, it
saves a copy of the visible grid and disables scrolling into and resizing out
of the history; when deactivated the visible data is restored and the history
reenabled.
2009-07-13 10:43:52 +00:00
Nicholas Marriott
f031975dc0 Implement the CBT (backward tab) sequence (\033[Z). 2009-06-04 21:02:21 +00:00
Nicholas Marriott
d42fb43f4f Proper support for tab stops (\033H etc), using a bitstring(3). Makes another
vttest test happy.
2009-06-04 18:48:24 +00:00
Nicholas Marriott
d6015824dd Okay, so I screwed up when testing this, doh. Unbreak so that CAN/SUB actually
do cancel the sequence, and tweak to make the code more clear.
2009-06-04 14:42:14 +00:00
Nicholas Marriott
6c1f03578d Oops, CAN and SUB should abort the sequence (return to first state), not remain
in the same state.
2009-06-04 14:24:49 +00:00
Nicholas Marriott
8dd2f0da3f More input compatibility love. Support C0 within escape sequences, and the C0
control character VT (vertical tab, \013), which is treated as LF like
VT102. Makes another vttest happy.
2009-06-04 14:15:50 +00:00
Nicholas Marriott
52ec9b9ec4 Implement the DEC alignment test. With the last change this is enough for the
first cursor test in vttest (in ports) to pass; it still shops a few more
problems though.
2009-06-03 23:30:40 +00:00
Nicholas Marriott
2faec76afa Pass window titles through vis(1). <0x20 is dropped anyway by the input state
machine but top-bit-set nonprintables could cause trouble, and they are neater
like this anyway.

Suggested by deraadt a few days ago.
2009-06-03 19:33:04 +00:00
Nicholas Marriott
35876eaab9 Import tmux, a terminal multiplexor allowing (among other things) a single
terminal to be switched between several different windows and programs
displayed on one terminal be detached from one terminal and moved to another.

ok deraadt pirofti
2009-06-01 22:58:49 +00:00