Commit Graph

146 Commits

Author SHA1 Message Date
nicm
8b804fb589 Support UTF-8 entry into the command prompt. 2016-10-11 07:11:40 +00:00
nicm
c426e485e5 Loads more static, except for cmd-*.c and window-*.c. 2016-10-10 21:29:23 +00:00
nicm
2e5584c2b4 Allow repeat count to be specified in mode key tables with bind-key -R,
and set the default repeat count to 5 for WheelUp and WheelDown in
copy-mode.
2016-09-12 15:40:58 +00:00
nicm
3c10df4f87 Allow #[] in window-status-separator. 2016-06-06 07:23:36 +00:00
nicm
995af0e2b7 I no longer use my SourceForge address so replace it. 2016-01-19 15:59:12 +00:00
nicm
311be04d61 Don't rely on a calculation wrapping when applying message-limit, and
break out of the loop early. From Nicolas Viennot.
2016-01-01 08:04:20 +00:00
nicm
88bc8f3528 Style nits and line wrapping of function declarations. 2015-12-11 16:37:21 +00:00
nicm
01831da5f5 Add cmdq as an argument to format_create and add a format for the
command name (will also be used for more later).
2015-12-11 12:27:36 +00:00
nicm
e0f26dcda3 Remove format_create_flags and just pass flags to format_create. 2015-12-08 08:34:18 +00:00
tim
4fcc02ee9d If display-time is set to 0, show status messages until a key is pressed;
OK nicm@
2015-11-22 18:28:01 +00:00
nicm
fce56c56ef Instead of separate tables for different types of options, give each
option a scope type (server, session, window) in one table.
2015-11-20 12:01:19 +00:00
nicm
577c0e3e5a Use __unused rather than rolling our own. 2015-11-18 14:27:44 +00:00
nicm
c5689a5a40 Long overdue change to the way we store cells in the grid: now, instead
of storing a full grid_cell with UTF-8 data and everything, store a new
type grid_cell_entry. This can either be the cell itself (for ASCII
cells), or an offset into an extended array (per line) for UTF-8
data.

This avoid a large (8 byte) overhead on non-UTF-8 cells (by far the
majority for most users) without the complexity of the shadow array we
had before. Grid memory without any UTF-8 is about half.

The disadvantage that cells can no longer be modified in place and need
to be copied out of the grid and back but it turned out to be lot less
complicated than I expected.
2015-11-13 08:09:28 +00:00
nicm
1b86f520ea Nuke the utf8 and status-utf8 options and make tmux only a UTF-8
terminal. We still support non-UTF-8 terminals outside tmux, but inside
it is always UTF-8 (as when the utf8 and status-utf8 options were on).
2015-11-12 11:09:11 +00:00
nicm
69e0b8326a Support UTF-8 key bindings by expanding the key type from int to
uint64_t and converting UTF-8 to Unicode on input and the reverse on
output. (This allows key bindings, there are still omissions - the
largest being that the various prompts do not accept UTF-8.)
2015-11-12 11:05:34 +00:00
nicm
44657bf932 Move struct options into options.c. 2015-10-27 15:58:42 +00:00
nicm
076034345a Use client pointer not file descriptor in logging. 2015-10-20 21:12:08 +00:00
nicm
16efa84838 Make refresh-client force update of jobs, from Sina Siadat. 2015-09-14 10:25:52 +00:00
nicm
b569585000 Move struct paste_buffer out of tmux.h. 2015-08-29 09:25:00 +00:00
nicm
75d10058a4 Run status update on a per-client timer at status-interval. 2015-08-28 12:16:28 +00:00
nicm
5ec3621101 status_out and associated data structures are no longer used. 2015-07-29 11:56:02 +00:00
nicm
b254115acd Tidy up the way terminals are described and move some structs out of tmux.h. 2015-07-28 15:18:10 +00:00
nicm
92af3766ec Add an option (history-file) for a file to save/restore command prompt
history, from Olof-Joachim Frahm.
2015-07-20 15:50:04 +00:00
nicm
379400cfa6 Move the jobs output cache into the formats code so that #() work more
generally (for example, again working in set-titles-string).
2015-05-27 13:28:04 +00:00
nicm
0b39e6427f Remove ARRAY_* from history and expand completion to complete a) layout
names and b) targets beginning with -t or -s.
2015-05-06 23:56:46 +00:00
nicm
07dfdb974d Make message log a TAILQ. 2015-04-25 18:33:59 +00:00
nicm
583b4ab72b Set working directory for run-shell and if-shell. 2015-04-24 22:19:36 +00:00
nicm
bf635e7741 Rewrite of tmux mouse support which was a mess. Instead of having
options for "mouse-this" and "mouse-that", mouse events may be bound as
keys and there is one option "mouse" that turns on mouse support
entirely (set -g mouse on).

See the new MOUSE SUPPORT section of the man page for description of the
key names and new flags (-t= to specify the pane or window under mouse
as a target, and send-keys -M to pass through a mouse event).

The default builtin bindings for the mouse are:

    bind -n   MouseDown1Pane select-pane -t=; send-keys -M
    bind -n MouseDown1Status select-window -t=
    bind -n   MouseDrag1Pane copy-mode -M
    bind -n MouseDrag1Border resize-pane -M

To get the effect of turning mode-mouse off, do:

    unbind -n MouseDrag1Pane
    unbind -temacs-copy MouseDrag1Pane

The old mouse options are now gone, set-option -q may be used to
suppress warnings if mixing configuration files.
2015-04-19 21:34:21 +00:00
nicm
52756fb3c5 Use the same time for both calls to format_expand_time. 2015-02-06 23:28:52 +00:00
nicm
313f2263f8 status_replace can now become local to status.c and it no longer needs
the jobsflag argument. While here there is no need to repeat work that
format_defaults already does.
2015-02-06 17:21:08 +00:00
nicm
03758a50dc Add format_expand_time and use it instead of status_replace where
command execution is not needed.
2015-02-06 17:11:39 +00:00
nicm
4946f74253 Wrap all the individual format_* calls in a single format_defaults
functions.
2015-02-05 10:29:43 +00:00
nicm
c9642ee213 Remove two unused arguments from status_replace. 2015-02-01 23:43:23 +00:00
sthen
f9c7f9a17a typo in comment ;) ok nicm 2015-01-20 10:57:10 +00:00
nicm
d24c9d7d3e Do not put a space between status-left/status-right and the window list,
instead move the space into the defaults for the options (so status-left
now defaults to "[#S] ". From Balazs Kezes.
2014-11-05 23:15:11 +00:00
nicm
0a1a88d63c Better format for printf format attributes. 2014-10-20 23:57:13 +00:00
nicm
a27ba6e380 Add xreallocarray and remove nmemb argument from xrealloc. 2014-10-08 17:35:58 +00:00
nicm
d306bbe11e Take account of window-status-separator when checking window position,
based on diff from Balazs Kezes.
2014-10-02 10:39:43 +00:00
nicm
bec6c807cd There is no longer a need for a paste_stack struct or for global_buffers
to be global. Move to paste.c.
2014-04-24 09:14:43 +00:00
nicm
992ef70fb6 Remove the monitor-content option and associated bits and bobs. It's
never worked very well. If there is a big demand for it to return, will
consider better ways to do it.
2014-04-17 07:36:45 +00:00
nicm
8880bdb67c Do not replace ## with # in status_replace1 because it'll be done later
by the format code.
2014-04-02 17:08:23 +00:00
nicm
dca7d1c0fd Make message-limit a server option. 2014-03-31 21:41:35 +00:00
nicm
f835be4bb2 Style nit - no space between function name and bracket. 2014-02-14 13:59:01 +00:00
nicm
d0accdba88 Check for NULL session and whatnot in status_replace, from Thomas Adam. 2014-02-14 12:37:54 +00:00
nicm
945339b443 Allow replacing each of the many sets of separate foo-{fg,bg,attr}
options with a single foo-style option. For example:

    set -g status-fg yellow
    set -g status-bg red
    set -g status-attr blink

Becomes:

    set -g status-style fg=yellow,bg=red,blink

The -a flag to set can be used to add to rather than replace a style. So:

    set -g status-bg red

Becomes:

    set -ag status-style bg=red

Currently this is fully backwards compatible (all *-{fg,bg,attr} options
remain) but the plan is to deprecate them over time.

From Tiago Cunha.
2014-01-28 23:07:09 +00:00
Nicholas Marriott
7af5fec038 Whitespace nits, from Ben Boeckel. 2013-07-05 14:44:06 +00:00
Nicholas Marriott
c231381aa3 Demote the old single-character replacement variables (#S and friends)
to aliases of formats. From Tiago Cunha.
2013-05-31 19:56:05 +00:00
Nicholas Marriott
d28a39d01d Extend jobs to support writing and use that for copy-pipe instead of
popen, from Chris Johnsen.
2013-03-25 11:43:01 +00:00
Nicholas Marriott
c519f9a84c evbuffer_readline returns allocated storage, don't leak it. 2013-03-22 15:55:22 +00:00
Nicholas Marriott
8d59b189cc No more lint means no more ARGSUSED. 2013-03-22 10:31:22 +00:00