Commit Graph

37 Commits

Author SHA1 Message Date
nicm
646995384d Support for windows larger than visible on the attached client. This has
been a limitation for a long time.

There are two new options, window-size and default-size, and a new
command, resize-window. The force-width and force-height options and the
session_width and session_height formats have been removed.

The new window-size option tells tmux how to work out the size of
windows: largest means it picks the size of the largest session,
smallest the smallest session (similar to the old behaviour) and manual
means that it does not automatically resize windows. The default is
currently largest but this may change. aggressive-resize modifies the
choice of session for largest and smallest as it did before.

If a window is in a session attached to a client that is too small, only
part of the window is shown. tmux attempts to keep the cursor visible,
so the part of the window displayed is changed as the cursor moves (with
a small delay, to try and avoid excess redrawing when applications
redraw status lines or similar that are not currently visible). The
offset of the visible portion of the window is shown in status-right.

Drawing windows which are larger than the client is not as efficient as
those which fit, particularly when the cursor moves, so it is
recommended to avoid using this on slow machines or networks (set
window-size to smallest or manual).

The resize-window command can be used to resize a window manually. If it
is used, the window-size option is automatically set to manual for the
window (undo this with "setw -u window-size"). resize-window works in a
similar way to resize-pane (-U -D -L -R -x -y flags) but also has -a and
-A flags. -a sets the window to the size of the smallest client (what it
would be if window-size was smallest) and -A the largest.

For the same behaviour as force-width or force-height, use resize-window
-x or -y, and "setw -u window-size" to revert to automatic sizing..

If the global window-size option is set to manual, the default-size
option is used for new windows. If -x or -y is used with new-session,
that sets the default-size option for the new session.

The maximum size of a window is 10000x10000. But expect applications to
complain and much higher memory use if making a window excessively
big. The minimum size is the size required for the current layout
including borders.

The refresh-client command can be used to pan around a window, -U -D -L
-R moves up, down, left or right and -c returns to automatic cursor
tracking. The position is reset when the current window is changed.
2018-10-18 08:38:01 +00:00
nicm
7bc6c105b7 Only include pane status in minimum size if it is turned on, GitHub
issue 1480.
2018-09-24 15:29:56 +00:00
nicm
f6bad7efd7 Instead of working out which pane to resize with the mouse by walking
the panes list, look through the layout cells for the nearest border and
resize that cell. From Dan Aloni in GitHub issue 1374.
2018-06-08 20:54:22 +00:00
nicm
26792b9035 Fix size calculation when spreading out panes. 2018-03-23 07:44:44 +00:00
nicm
829fe38ab1 Improve logging for layout cells. 2018-01-12 10:16:03 +00:00
nicm
3b649d2fcd Add a common function for spreading out cells and use it for the two
even layouts and to add a -E flag to select-layout to spread out cells
evenly without changing parent cells.
2017-11-15 19:59:27 +00:00
nicm
d455da45eb Fix calculation of size for full size splits. 2017-03-11 15:16:35 +00:00
nicm
41e633acf5 Use the notify name string instead of going via an enum and change
existing hooks to use notifys instead.
2016-10-16 22:06:40 +00:00
nicm
66b5477cc1 Do not allow the opposite pane to resize when dragging with the mouse
because it is not possible to keep the mouse on the border when the
minimum size is reached.
2016-10-10 17:28:30 +00:00
nicm
fed1e384ad Add support for performing a full width split (with splitw -f), rather
than splitting the current cell. From Stephen Kent.
2016-09-04 17:37:06 +00:00
nicm
f8cc48a43f Fix minimum size when pane status line is enabled, reported by Y Petremann. 2016-08-03 09:07:02 +00:00
nicm
0509be0740 Add option to include status text in the pane borders. If
pane-border-status is set to "top" or "bottom" (rather than "off"),
every pane has a permanent top or bottom border containing the text from
pane-border-format.

Based on a diff sent long ago by Jonathan Slenders, mostly rewritten and
simplified by me.
2016-04-29 15:00:48 +00:00
nicm
995af0e2b7 I no longer use my SourceForge address so replace it. 2016-01-19 15:59:12 +00:00
nicm
88bc8f3528 Style nits and line wrapping of function declarations. 2015-12-11 16:37:21 +00:00
nicm
6b709e655e -l should apply to the new not the old pane with -b, from "MadMaverick9"
on GitHub.
2015-09-18 09:55:22 +00:00
nicm
bf635e7741 Rewrite of tmux mouse support which was a mess. Instead of having
options for "mouse-this" and "mouse-that", mouse events may be bound as
keys and there is one option "mouse" that turns on mouse support
entirely (set -g mouse on).

See the new MOUSE SUPPORT section of the man page for description of the
key names and new flags (-t= to specify the pane or window under mouse
as a target, and send-keys -M to pass through a mouse event).

The default builtin bindings for the mouse are:

    bind -n   MouseDown1Pane select-pane -t=; send-keys -M
    bind -n MouseDown1Status select-window -t=
    bind -n   MouseDrag1Pane copy-mode -M
    bind -n MouseDrag1Border resize-pane -M

To get the effect of turning mode-mouse off, do:

    unbind -n MouseDrag1Pane
    unbind -temacs-copy MouseDrag1Pane

The old mouse options are now gone, set-option -q may be used to
suppress warnings if mixing configuration files.
2015-04-19 21:34:21 +00:00
nicm
540f0b3e45 Both the two previous ways of navigating panes by direction have
irritating flaws:

a) The old way of always using the top or left if the choice is
ambiguous is annoying when the layout is unbalanced.

b) The new way of remembering the last used pane is annoying if the
layout is balanced and the leftmost is obvious to the user (because
clearly if we go right from the top-left in a tiled set of four we want
to end up in top-right, even if we were last using the bottom-right).

So instead, use a combination of both: if there is only one possible
pane alongside the current pane, move to it, otherwise choose the most
recently used of the choice.
2014-05-08 06:03:30 +00:00
nicm
315d45a0eb Fix crash due to uninitialized lastwp member of layout_cell, reported by
Balazs Kezes.
2014-02-22 18:01:10 +00:00
nicm
d2160e3f83 mouse-resize-pane: Only resize on border select
The current behaviour of mouse-resize-pane is such that if the mouse
button is held down and a selection takes place within a pane, that if
the mouse pointer then hits a border edge, that pane-resize would
initiate.

This seems counter-intuitive; instead, check for a resize condition if
the border of a pane is selected, and in the case of mouse selection
within a pane, no longer resize the pane if edge of the border is hit.

By Thomas Adam.
2013-10-10 12:08:14 +00:00
Nicholas Marriott
c71844de63 Add resize-pane -Z to temporary zoom the active pane to occupy the full
window or unzoom (restored to the normal layout) if it already zoomed,
bound to C-b z by default. The pane is unzoomed on pretty much any
excuse whatsoever.

We considered making this a new layout but the requirements are quite
different from layouts so decided it is better as a special case. Each
current layout cell is saved, a temporary one-cell layout generated and
all except the active pane set to NULL.

Prompted by suggestions and scripts from several. Thanks to Aaron Jensen
and Thiago Padilha for testing an earlier version.
2013-03-24 09:57:59 +00:00
Nicholas Marriott
f0efa576e0 Add resize-pane -x and -y for absolute pane size (much requested). 2013-03-22 10:37:39 +00:00
Nicholas Marriott
e33ba57c13 Remove the layout undo/redo code which never really worked. 2013-01-17 00:11:22 +00:00
Nicholas Marriott
d210d99cce Make mouse event structure clearer by defining events (up, click, drag)
and simplifying how buttons and wheels are represented, from Ailin
Nemui. Should be no functional changes.
2012-10-26 14:35:42 +00:00
Nicholas Marriott
df912e3540 xfree is not particularly helpful, remove it. From Thomas Adam. 2012-07-10 11:53:01 +00:00
Nicholas Marriott
711d2205dd Fix some indentation. 2012-04-01 21:07:35 +00:00
Nicholas Marriott
e1273fb6a1 Fix option name. 2012-04-01 13:21:38 +00:00
Nicholas Marriott
85f5485cb5 Add a layout history which can be stepped through with select-layout -u
and -U commands (bound to 'u' and 'U' by default).
2012-04-01 13:18:38 +00:00
Nicholas Marriott
46210344a6 Add notify hooks for various events, the functions are currently empty
stubs but will be filled in for control mode later. From George Nachman.
2012-03-17 22:35:09 +00:00
Nicholas Marriott
07ac16807f Add move-pane command (like join-pane but allows the same window). Also
-b flag to join-pane and move-pane to place the pane to the left or
above. From George Nachman.
2012-03-03 08:31:18 +00:00
Nicholas Marriott
230d0fbc9e Add an option to move the status line to the top of the screen,
requested by many.
2012-01-29 09:37:02 +00:00
Nicholas Marriott
f3741f0653 Add a new option, mouse-resize-pane. When on, panes may be resized by
dragging their borders. From hsim at gmx.li.
2011-05-08 20:34:12 +00:00
Nicholas Marriott
552c9cd83f Custom layouts. list-windows command displays the layout as a string (such as
"bb62,159x48,0,0{79x48,0,0,79x48,80,0}") and it can be applied to another
window (with the same number of panes or fewer) using select-layout.
2010-06-29 03:30:13 +00:00
Nicholas Marriott
6a45fab608 New command, join-pane, to split and move an existing pane into the space (like
splitw then movep, or the reverse of breakp).
2010-01-07 20:52:18 +00:00
Nicholas Marriott
15a64b805e Massive spaces->tabs and trailing whitespace cleanup, hopefully for the last
time now I've configured emacs to make them displayed in really annoying
colours...
2009-12-03 22:50:09 +00:00
Nicholas Marriott
6036bdd06c Improved layout code.
Each window now has a tree of layout cells associated with it. In this tree,
each node is either a horizontal or vertical cell containing a list of other
cells running from left-to-right or top-to-bottom, or a leaf cell which is
associated with a pane.

The major functional changes are:

- panes may now be split arbitrarily both horizontally (splitw -h, C-b %) and
  vertically (splitw -v, C-b ");
- panes may be resized both horizontally and vertically (resizep -L/-R/-U/-D,
  bound to C-b left/right/up/down and C-b M-left/right/up/down);
- layouts are now applied and then may be modified by resizing or splitting
  panes, rather than being fixed and reapplied when the window is resized or
  panes are added;
- manual-vertical layout is no longer necessary, and active-only layout is gone
  (but may return in future);
- the main-pane layouts now reduce the size of the main pane to fit all panes
  if possible.

Thanks to all who tested.
2009-07-19 13:21:40 +00:00
Nicholas Marriott
fe20c0d89e Get rid of the PANE_HIDDEN flag in favour of a function, and moving the
decision for whether or not a pane should be drawn out of the layout code and
into the redraw code.

This is needed for the new layout design, getting it in now to make that easier
to work on.
2009-07-14 07:23:36 +00:00
Nicholas Marriott
35876eaab9 Import tmux, a terminal multiplexor allowing (among other things) a single
terminal to be switched between several different windows and programs
displayed on one terminal be detached from one terminal and moved to another.

ok deraadt pirofti
2009-06-01 22:58:49 +00:00