Commit Graph

563 Commits

Author SHA1 Message Date
nicm
c12711affd Default for xterm-keys was wrong, stop documenting it. 2017-04-28 13:39:59 +00:00
nicm
59ff9b8128 Typo in example. 2017-04-22 06:15:22 +00:00
nicm
0b44ad99b5 If a #() command doesn't exit, use its most recent line of output (it
must be a full line). Don't let it redraw the status line more than once
a second.

Requested by someone about 10 years ago...
2017-04-20 09:20:22 +00:00
nicm
fa6deb5866 When the data we have buffered to write to a terminal grows beyond a
reasonable amount (currently width * height * 8 bytes), discard all
output to the terminal and start trying to redraw periodically
instead. Continue with this until the amount of data we are trying to
write falls to a low level again.

This helps to prevent tmux sitting on a huge buffer of data when there
are processes with fast output running inside tmux but the outside
terminal is slow.

A new client_discarded format holds the amount of data that has been
discarded due to this mechanism.

The three variables (when to start this, when to stop, and how often to
redraw) are basically "works for me" at the moment, this is going in to
see how it goes and if it causes problems for anyone else.
2017-04-19 06:52:27 +00:00
nicm
fb3c5efa50 Add a format for number of bytes writtent to client, useful for debugging. 2017-04-18 15:44:17 +00:00
nicm
9b28200578 Give each client a name. This defaults to the tty name as before but
falls back to an alternative if the tty name is not available. This is
clearer than overloading the client ttyname member and allows us to
remove the path stored in the tty struct, it should always be the same
as the client.
2017-04-05 10:49:46 +00:00
nicm
df3ab87964 Add support for the strikethrough attribute (SGR 9), using the new smxx
terminfo capability. This means there are now nine attribute bits, so
anything above 0xff uses an extended cell.
2017-03-22 07:16:54 +00:00
nicm
640d9e54b7 "status bar" -> "status line" for consistency, from Benjamin Dopplinger. 2017-02-15 08:47:55 +00:00
nicm
d22c15107b Don't use a bufferevent for the tty, so we can keep better track of what
is being written and when.

Also a manpage typo fix from jmc@.
2017-02-10 12:59:18 +00:00
nicm
c6a3446398 Instead of numbering session groups, give them a name which may be given
to -t instead of a target session. Also allow them to contain only one
session.
2017-02-09 15:04:53 +00:00
nicm
8de4c15dfa Document refresh-client -C. 2017-02-09 14:49:00 +00:00
nicm
b7ddfb39f3 Don't lie about the default size in the man page. 2017-02-09 12:00:42 +00:00
nicm
dd0c814779 Implement "all event" (1003) mouse mode but in a way that works. The
main issue is that if we have two panes, A with 1002 and B with 1003, we
need to set 1003 outside tmux in order to get all the mouse events, but
then we need to suppress the ones that pane A doesn't want. This is easy
in SGR mouse mode, because buttons == 3 is only used for movement events
(for other events the trailing m/M marks a release instead), but in
normal mouse mode we can't tell so easily. So for that, look at the
previous event instead - if it is drag+release as well, then the current
event is a movement event.
2017-02-01 09:55:07 +00:00
nicm
b6099f31ea Add -n to break-pane. 2017-01-29 22:10:55 +00:00
nicm
0a63ab4f0f If xterm-keys is on, use xterm(1) style keys for Home and End as well as
modified keys.
2017-01-25 14:24:54 +00:00
nicm
4b2821ff98 Make update-environment an array as well. 2017-01-24 20:15:32 +00:00
nicm
b77dd75b57 Convert terminal-overrides to an array option. 2017-01-24 20:05:15 +00:00
nicm
16e43d6a42 Remove some lies about terminal-overrides from tmux.1. 2017-01-24 20:01:34 +00:00
nicm
85338bb75f Add support for custom command aliases, this is an array option which
contains items of the form "alias=command". This is consulted when an
unknown command is parsed.
2017-01-24 19:53:37 +00:00
nicm
95950bf668 Add -E to detach-client to exec a command to replace the client instead
of exiting it, useful if tmux wasn't exec'd itself. From Jenna Magius.
2017-01-13 10:12:12 +00:00
nicm
bf6a5c056d Add a format for terminal type. 2017-01-11 16:09:57 +00:00
nicm
e78142232f Some manpage fixes: rephrase a convoluted sentence, make the names of
some keys more standard, and use Ql instead of Dq.
2017-01-10 10:08:59 +00:00
jmc
40fddfbdd6 avoid unneccessary markup; tweaked and ok nicm 2017-01-10 07:55:48 +00:00
nicm
d2d984647e Add %if/%endif for conditionals when parsing configuration files, the
argument is a format (the new == and != are useful).
2017-01-09 21:28:56 +00:00
nicm
844f2eacf4 Add simple comparisons in formats: #{==:a,b} and #{!=:a,b} ("a" and "b"
are expanded so can compare formats). And expand the condition to
#{?a,b,c} (the "a" part) if it doesn't work as a simple lookup.

Also add FORMAT_NOJOBS flag to disable jobs in a format.
2017-01-09 21:03:25 +00:00
nicm
5330a2a85d Run the source-file pattern through glob(3). 2017-01-09 19:27:00 +00:00
nicm
c05002b0f2 Add note about ccc and initc so people who want it can see it is
possible.
2017-01-07 15:40:23 +00:00
nicm
461217d0f0 Incremental search in copy mode (on for emacs keys by default) - much
the same as normal searching but updates the cursor position and marked
search terms as you type. C-r and C-s in the prompt repeat the search,
once finished searching (with Enter), N and n work as before.
2017-01-06 11:57:03 +00:00
nicm
6b46c62bb4 Make send -N work for all keys, not just in copy mode. From Artem Fokin. 2016-11-29 12:54:46 +00:00
nicm
7e6c2cb238 Make the selection able to exist independent of the cursor position, so
that it is not affected by scrolling. If MouseDragEnd1Pane is bound to
the new "stop-selection" command:

    bind -Tcopy-mode MouseDragEnd1Pane stop-selection

A selection made with the mouse will stay as it is after button 1 is
released. (It also works bound to a key.)

From Artem Fokin.
2016-11-24 13:38:44 +00:00
nicm
9fe43d6acb Add copy-pipe-and-cancel, from Artem Fokin. 2016-11-15 09:53:23 +00:00
nicm
8084a2c9e6 Add %%% to substitute with quotes escaped (convert " to \"). Use this
for the prompts in copy mode. Fixes problems with jumping to ' reported
by Theo Buehler.
2016-10-21 13:51:59 +00:00
nicm
fb109ae97d xterm-keys was in the wrong place in the list; Dilyan Palauzov. 2016-10-18 19:25:26 +00:00
nicm
41e633acf5 Use the notify name string instead of going via an enum and change
existing hooks to use notifys instead.
2016-10-16 22:06:40 +00:00
nicm
d15d54c2c8 Add hook_session and hook_window formats to get information on the
affected session or window when a hook fires. Enable session-created and
session-closed hooks now that that is available.
2016-10-16 19:55:52 +00:00
nicm
ddc4512d2e Rewrite command queue handling. Each client still has a command queue,
but there is also now a global command queue. Instead of command queues
being dispatched on demand from wherever the command happens to be
added, they are now all dispatched from the top level server
loop. Command queues may now also include callbacks as well as commands,
and items may be inserted after the current command as well as at the end.

This all makes command queues significantly more predictable and easier
to use, and avoids the complex multiple nested command queues used by
source-file, if-shell and friends.

A mass rename of struct cmdq to a better name (cmdq_item probably) is
coming.
2016-10-16 17:55:14 +00:00
jmc
4fbf564292 zap double .Pp; 2016-10-15 12:34:02 +00:00
nicm
63b2547a02 Fire hooks on the simple notifys (window-renamed and session-renamed),
the complicated ones get no hooks for now (more to come).
2016-10-15 00:09:30 +00:00
nicm
0ec18e537d Missing flags in capture-pane, and tweak choose-tree text. From Dilyan Palauzov. 2016-10-14 17:40:47 +00:00
nicm
4289a1ebfa Trying to do hooks generically is way too complicated and unreliable and
confusing, particularly trying to automatically figure out what target
hooks should be using. So simplify it:

- drop before hooks entirely, they don't seem to be very useful;

- commands with special requirements now fire their own after hook (for
  example, if they change session or window, or if they have -t and -s
  and need to choose which one the hook uses as current target);

- commands with no special requirements can have the CMD_AFTERHOOK flag
  added and they will use the -t state.

At the moment new-session, new-window, split-window fire their own hook,
and display-message uses the flag. The remaining commands still need to
be looked at.
2016-10-13 22:48:51 +00:00
nicm
7a1a01feef Remove the set-remain-on-exit option, it was always a hack and can now
be done with hooks instead.
2016-10-13 21:37:03 +00:00
nicm
1bd08f903b Remove mention of key tables than no longer exist. 2016-10-13 20:09:19 +00:00
nicm
05dac2e42c -f missed from splitw usage, from Felix Rosencrantz. 2016-10-13 09:06:48 +00:00
nicm
40253048ca bind-key -c has gone, remove from man page, and unused table declarations. 2016-10-12 15:26:37 +00:00
nicm
c484c5a2a1 Drop the edit mode key tables and just use fixed key bindings for the
command prompt.
2016-10-12 14:50:14 +00:00
nicm
68bebe1fb7 The repeat prompt in both emacs and vi (and the old one in tmux) doesn't
support line editing and instead executes a command as soon as a
non-number key is pressed. Add a -N flag to command-prompt for the same
in copy mode. Reported by Theo Buehler.
2016-10-12 13:03:27 +00:00
nicm
85d7afaefc Support double and triple clicks (they are cumulative, so double is
fired then triple), and use for select-word and select-line in copy
mode. Inspired by a different solution from Omar Sandoval.
2016-10-11 09:30:36 +00:00
nicm
76d6d3641f Fundamental change to how copy mode key bindings work:
The vi-copy and emacs-copy mode key tables are gone, and instead copy
mode commands are bound in one of two normal key tables ("copy-mode" or
"copy-mode-vi"). Keys are bound to "send-keys -X copy-mode-command". So:

    bind -temacs-copy C-Up scroll-up
    bind -temacs-copy -R5 WheelUpPane scroll-up

Becomes:

    bind -Tcopy-mode C-Up send -X scroll-up
    bind -Tcopy-mode WheelUpPane send -N5 -X scroll-up

This allows the full command parser and command set to be used - for
example, we can use the normal command prompt for searching, jumping,
and so on instead of a custom one:

    bind -Tcopy-mode C-r command-prompt -p'search up' "send -X search-backward '%%'"

command-prompt also gets a -1 option to only require on key press, which
is needed for jumping.

The plan is to get rid of mode keys entirely, so more to come eventually.
2016-10-11 07:23:34 +00:00
nicm
305c832a97 Document set-hook -u. 2016-10-03 20:58:39 +00:00
nicm
2e5584c2b4 Allow repeat count to be specified in mode key tables with bind-key -R,
and set the default repeat count to 5 for WheelUp and WheelDown in
copy-mode.
2016-09-12 15:40:58 +00:00
nicm
fed1e384ad Add support for performing a full width split (with splitw -f), rather
than splitting the current cell. From Stephen Kent.
2016-09-04 17:37:06 +00:00
nicm
43f292b2e0 Two minor fixes from dilyan palauzov. 2016-08-22 20:07:58 +00:00
nicm
f811127bb6 We only replace the first %%, not multiple (use %2 for second). 2016-08-03 09:08:40 +00:00
nicm
325cbe90d9 Allow a command to be specified to display-panes, similar to
command-prompt, rather than always just selecting the pane.
2016-06-16 10:55:47 +00:00
nicm
0c7ddae2ab Add missing buffer_name format, from Awal Garg. 2016-06-15 14:43:06 +00:00
nicm
068b8b03ad Add -F to list-commands. 2016-06-15 08:54:11 +00:00
tim
fdd368a294 - Rework load_cfg() error handling a little.
- Add -q to source-file to suppress errors about nonexistent files.

Input and OK nicm@
2016-05-12 16:05:33 +00:00
nicm
87be2da4e1 Missing format (window_activity_flag) and a missing Ta. 2016-05-01 11:46:12 +00:00
jmc
0c7895076e tweak previous; 2016-04-29 20:57:10 +00:00
nicm
eb8e76d433 Compact a small table into text. 2016-04-29 15:58:52 +00:00
nicm
0509be0740 Add option to include status text in the pane borders. If
pane-border-status is set to "top" or "bottom" (rather than "off"),
every pane has a permanent top or bottom border containing the text from
pane-border-format.

Based on a diff sent long ago by Jonathan Slenders, mostly rewritten and
simplified by me.
2016-04-29 15:00:48 +00:00
nicm
0d84fdd953 Final parts of command hooks, add before- and after- hooks to each command. 2016-04-29 14:05:24 +00:00
nicm
1cedf78284 Add next/previous paragraph, from J Raynor. 2016-04-27 09:39:09 +00:00
nicm
fa97b0a95b Instead of reusing MouseUp at the finish of a drag, add a new key
MouseDragEnd. It can be useful to bind them separately in copy mode.
2016-03-18 07:28:27 +00:00
nicm
c7851e0ee7 Fix break-pane synopsis and some other tmux.1 bits. 2016-03-01 11:58:45 +00:00
nicm
8028560f82 Support negative trim values (#{=-10:pane_title}) to trim from the end,
suggested by Kevin Brubeck Unhammer.
2016-01-31 09:54:46 +00:00
nicm
427b820426 Support for RGB colour, using the extended cell mechanism to avoid
wasting unnecessary space. The 'Tc' flag must be set in the external
TERM entry (using terminal-overrides or a custom terminfo entry), if not
tmux will map to the closest of the 256 or 16 colour palettes.

Mostly from Suraj N Kurapati, based on a diff originally by someone else.
2016-01-29 11:13:56 +00:00
nicm
995af0e2b7 I no longer use my SourceForge address so replace it. 2016-01-19 15:59:12 +00:00
nicm
c9815307eb Add hooks for alerts (bell, silence, activity), from Thomas Adam. 2016-01-16 00:36:53 +00:00
nicm
021c64310d Add infrastructure to work out the best target given a pane or window
alone and use it to add pane_died and pane_exited hooks.
2015-12-16 21:50:37 +00:00
nicm
5ed17e84fa Add key-table option to set the default key table for a session, allows
different key bindings for different sessions and a few other things.
2015-12-12 18:32:24 +00:00
nicm
39cf9c9d31 Allow prefix and prefix2 to be set to None to disable (useful if you
would rather bind the prefix in the root table).
2015-12-12 18:19:00 +00:00
nicm
f2be3ad46f Mention {src,dst}-{window,pane} where we define target-{window,pane}. 2015-12-11 16:27:01 +00:00
nicm
01831da5f5 Add cmdq as an argument to format_create and add a format for the
command name (will also be used for more later).
2015-12-11 12:27:36 +00:00
jmc
1f94274b92 Ed was meant to be El; 2015-12-08 06:42:07 +00:00
nicm
d2fb0efcd1 Add hooks infrastructure, basic commands (set-hook, show-hooks) and a
couple of not very useful client hooks. This will eventually let
commands be run at various points and on notifications. Joint work with
Thomas Adam.
2015-12-08 01:10:31 +00:00
guenther
1d331c7e62 Delete a duplicated line
ok jmc@
2015-11-29 17:06:59 +00:00
nicm
62d3af17f9 Make environ_set va_args and use it to tidy up some calls. Also add a
missing word in manpage (from jmc).
2015-11-24 23:46:15 +00:00
nicm
c18fbefe93 Document socket_path format. 2015-11-24 22:27:59 +00:00
nicm
1e2df2d464 Remove the -I part of show-messages which isn't really that useful; the
server start time can now be accessed with a new start_time format (use:
tmux display -p '#{t:start_time}')
2015-11-24 21:52:06 +00:00
nicm
4ec61bef46 Fix usage of detach-client. 2015-11-24 20:40:51 +00:00
tim
4fcc02ee9d If display-time is set to 0, show status messages until a key is pressed;
OK nicm@
2015-11-22 18:28:01 +00:00
nicm
5a5b950e8b Add s/foo/bar/: prefix for formats to substitute bar for foo. 2015-11-18 14:13:55 +00:00
nicm
531869bd92 Add window_visible_layout which ignores zoomed panes and use it for
control mode (which needs to know all panes), from George Nachman.
2015-11-13 10:00:26 +00:00
jmc
1da7475d0e tweak previous; ok nicm 2015-11-12 12:36:34 +00:00
nicm
1b86f520ea Nuke the utf8 and status-utf8 options and make tmux only a UTF-8
terminal. We still support non-UTF-8 terminals outside tmux, but inside
it is always UTF-8 (as when the utf8 and status-utf8 options were on).
2015-11-12 11:09:11 +00:00
nicm
a0f3999ce7 Remove the mouse_utf8_flag format as well. 2015-11-12 11:07:10 +00:00
nicm
00c34df186 Drop mouse-utf8 option and always turn on UTF-8 mouse if the client says
it supports UTF-8.
2015-11-11 23:23:33 +00:00
nicm
67c3a014b9 No more TMPDIR. 2015-10-27 14:51:35 +00:00
jmc
c582f7d177 space before punctuation; 2015-10-26 00:15:37 +00:00
nicm
e65306d8e7 Extend the modifiers allowed before formats: as well as the existing
#{=10:...}  length limit, add #{t:...} to convert a time_t format to a
string, #{b:...} for basename and #{d:...} for dirname. Remove all the
foo_string time formats as they can now be replaced by "t:", for example
#{window_activity_string} becomes #{t:window_activity}.
2015-10-25 22:29:17 +00:00
nicm
14da999408 Format for scroll position, from Jorge Morante. 2015-10-23 16:02:21 +00:00
nicm
60ca29df64 client_key_table was missing. 2015-10-21 13:14:36 +00:00
nicm
901c2eb20a Add copy-mode -e to exit copy mode when scrolling off the bottom, useful
for quick view of history, from Cam Hutchison.
2015-09-13 13:31:40 +00:00
nicm
cfabe30bec Add session_last_attached time and format, from Sina Siadat. 2015-09-10 08:58:14 +00:00
nicm
675def0396 Remove the lock-server option which is a bit redundant, it isn't that
different without it.
2015-08-28 12:31:55 +00:00
nicm
13b7fd82c1 Rename left/right/up/down relative to active pane to add -of suffix
(left-of/right-of/etc) to remove conflict with left/right meaning
leftmost or rightmost pane. From Ben Boeckel.
2015-08-12 08:55:20 +00:00
nicm
d33adc4fd0 Make -q suppress ambiguous option warnings too, from Cam Hutchison. 2015-07-27 08:45:45 +00:00
nicm
92af3766ec Add an option (history-file) for a file to save/restore command prompt
history, from Olof-Joachim Frahm.
2015-07-20 15:50:04 +00:00
nicm
d4ce210713 Correct the tsl/fsl sequence to ]0 not ]2 (from Marcel Korpel). While
here, Xr xterm and remove some advice about elinks that is better
elsewhere.
2015-07-20 10:34:11 +00:00