#{=10:...} length limit, add #{t:...} to convert a time_t format to a
string, #{b:...} for basename and #{d:...} for dirname. Remove all the
foo_string time formats as they can now be replaced by "t:", for example
#{window_activity_string} becomes #{t:window_activity}.
server at a time; it may be toggled or cleared with select-pane -m and
-M (the border is highlighted). A new target '~' or '{marked}' specifies
the marked pane to commands and it is the default target for the
swap-pane and join-pane -s flag (this makes them much simpler to use -
mark the source pane and then change to the target pane to run swapp or
joinp).
multiple times, also remove the default space in window_flags and use a
conditional to add it in window-status-format (this means additional
flags can be added in the option without extra spaces). From Thomas Adam
with tweaks by me.
historical (incorrect) behaviour for SGR 3 and send smso
(standout). Previously, we would send sitm (italics) if the terminal
outside had it and smso otherwise. This was acceptably until recently
because xterm's terminfo entry lacked sitm, so most users got smso.
People who want italics should set default-terminal to the forthcoming
"tmux" entry (and be prepared to deal with it being missing on older
hosts).
As a side-effect this changes default-terminal to be a server rather
than a session option.
suggested by and ok naddy
consistent but with much less duplication, but keeping the same internal
API. Also adds more readable aliases for some of the special tokens used
in targets (eg "{start}" instead of "^"). Some behaviours may have
changed, for example prefix matches now happen before fnmatch.
keys. The default key bindings become the "prefix" table and -n the
"root" table. Keys may be bound in new tables with bind -T and
switch-client -T used to specify the table in which the next key should
be looked up. Based on a diff from Keith Amling.
options for "mouse-this" and "mouse-that", mouse events may be bound as
keys and there is one option "mouse" that turns on mouse support
entirely (set -g mouse on).
See the new MOUSE SUPPORT section of the man page for description of the
key names and new flags (-t= to specify the pane or window under mouse
as a target, and send-keys -M to pass through a mouse event).
The default builtin bindings for the mouse are:
bind -n MouseDown1Pane select-pane -t=; send-keys -M
bind -n MouseDown1Status select-window -t=
bind -n MouseDrag1Pane copy-mode -M
bind -n MouseDrag1Border resize-pane -M
To get the effect of turning mode-mouse off, do:
unbind -n MouseDrag1Pane
unbind -temacs-copy MouseDrag1Pane
The old mouse options are now gone, set-option -q may be used to
suppress warnings if mixing configuration files.
split-window, respawn-window or respawn-pane, pass them directly to
execvp() to help avoid quoting problems. One argument still goes to "sh
-c" like before. Requested by many over the years. Patch from J Raynor.
much as before - buffers are automatically named "buffer0000",
"buffer0001" and so on and ordered as a stack. Buffers can be named
explicitly when creating ("loadb -b foo" etc) or renamed ("setb -b
buffer0000 -n foo"). If buffers are named explicitly, they are not
deleted when buffer-limit is reached. Diff from J Raynor.
mostly useless and annoying messages. Change those commands to silence
on success like all the others. Still accept the -q command line flag
and "quiet" server option for now.
options with a single foo-style option. For example:
set -g status-fg yellow
set -g status-bg red
set -g status-attr blink
Becomes:
set -g status-style fg=yellow,bg=red,blink
The -a flag to set can be used to add to rather than replace a style. So:
set -g status-bg red
Becomes:
set -ag status-style bg=red
Currently this is fully backwards compatible (all *-{fg,bg,attr} options
remain) but the plan is to deprecate them over time.
From Tiago Cunha.
descriptors rather than strings.
- Each session still has a current working directory.
- New sessions still get their working directory from the client that
created them or its attached session if any.
- New windows are created by default in the session working directory.
- The -c flag to new, neww, splitw allows the working directory to be
overridden.
- The -c flag to attach let's the session working directory be changed.
- The default-path option has been removed.
To get the equivalent to default-path '.', do:
bind c neww -c $PWD
To get the equivalent of default-path '~', do:
bind c neww -c ~
This also changes the client identify protocol to be a set of messages rather
than one as well as some other changes that should make it easier to make
backwards-compatible protocol changes in future.
rather than strings.
- Each session still has a current working directory.
- New sessions still get their working directory from the client that created
them or its attached session if any.
- New windows are created by default in the session working directory.
- The -c flag to new, neww, splitw allows the working directory to be
overridden.
- The -c flag to attach let's the session working directory be changed.
- The default-path option has been removed.
To get the equivalent to default-path '.', do:
bind c neww -c $PWD
To get the equivalent of default-path '', do:
bind c neww -c '#{pane_current_path}'
The equivalent of default-path '~' is left as an exercise for the reader.
This also changes the client identify protocol to be a set of messages rather
than one as well as some other changes that should make it easier to make
backwards-compatible protocol changes in future.
or unzoom (restored to the normal layout) if it already zoomed, bound to C-b z
by default. The pane is unzoomed on pretty much any excuse whatsoever.
We considered making this a new layout but the requirements are quite different
from layouts so decided it is better as a special case. Each current layout
cell is saved, a temporary one-cell layout generated and all except the active
pane set to NULL.
Prompted by suggestions and scripts from several. Thanks to Aaron Jensen and
Thiago Padilha for testing an earlier version.
commands and allow a command to block execution of subsequent commands. This
allows run-shell and if-shell to be synchronous which has been much requested.
Each client has a default command queue and commands are consumed one at a time
from it. A command may suspend execution from the queue by returning
CMD_RETURN_WAIT and then resume it by calling cmd_continue() - for example
run-shell does this from the callback that is fired after the job is freed.
When the command queue becomes empty, command clients are automatically exited
(unless attaching). A callback is also fired - this is used for nested commands
in, for example, if-shell which can block execution of the client's cmdq until
a new cmdq becomes empty.
Also merge all the old error/info/print functions together and lose the old
curclient/cmdclient distinction - a cmdq is bound to one client (or none if in
the configuration file), this is a command client if c->session is NULL
otherwise an attached client.
Sync from OpenBSD.
* obsd-master:
Add halfpage commands to mode command string table (missed by accident), from Thomas Adam.
Clarify some points about config files, notably that they are only read at server start. From Thomas Adam.
Use a utility function for common code to show errors in config file, from Thomas Adam.
Sync from OpenBSD.
* obsd-master:
Allow session tree (C-b s) to expand and collapse sessions with left/right/space keys. From Thomas Adam.
Remove some out of date text from man page, from Thomas Adam.
Add a flag to move-window to renumber the windows in a session (closing
any gaps) and add an option to do this automatically each time a window
is killed. From Thomas Adam.
Add a simple form of output rate limiting by counting the number of
certain C0 sequences (linefeeds, backspaces, carriage returns) and if it
exceeds a threshold (current default 50/millisecond), start to redraw
the pane every 100 milliseconds instead of making each change as it
comes. Two configuration options - c0-change-trigger and
c0-change-interval.
This makes tmux much more responsive under very fast output (for example
yes(1) or accidentally cat'ing a large file) but may not be perfect on
all terminals and connections - feedback very welcome, particularly
where this change has a negative rather than positive effect (making it
off by default is a possibility).
After much experimentation based originally on a request Robin Lee
Powell (which ended with a completely different solution), this idea
from discussion with Ailin Nemui.
certain C0 sequences (linefeeds, backspaces, carriage returns) and if it
exceeds a threshold (current default 50/millisecond), start to redraw
the pane every 100 milliseconds instead of making each change as it
comes. Two configuration options - c0-change-trigger and
c0-change-interval.
This makes tmux much more responsive under very fast output (for example
yes(1) or accidentally cat'ing a large file) but may not be perfect on
all terminals and connections - feedback very welcome, particularly
where this change has a negative rather than positive effect (making it
off by default is a possibility).
After much experimentation based originally on a request Robin Lee
Powell (which ended with a completely different solution), this idea
from discussion with Ailin Nemui.
Support "bracketed paste" mode. This adds a -p flag to paste-buffer - if
this is used and the application has requested bracketed pastes, then
tmux surrounds the pasted text by \033[200~ and \033[201~. Applications
like vim can (apparently) use this to avoid, for example, indenting the
text. From Ailin Nemui.
this is used and the application has requested bracketed pastes, then
tmux surrounds the pasted text by \033[200~ and \033[201~. Applications
like vim can (apparently) use this to avoid, for example, indenting the
text. From Ailin Nemui.
Add move-pane command (like join-pane but allows the same window). Also
-b flag to join-pane and move-pane to place the pane to the left or
above. From George Nachman.
Provide defined ways to set the various default-path possibilities: ~
for home directory, . for server start directory, - for session start
directory and empty for the pane's working directory (the default). All
can also be used as part of a relative path (eg -/foo). Also provide -c
flags to neww and splitw to override default-path setting.
Based on a diff from sthen. ok sthen
for home directory, . for server start directory, - for session start
directory and empty for the pane's working directory (the default). All
can also be used as part of a relative path (eg -/foo). Also provide -c
flags to neww and splitw to override default-path setting.
Based on a diff from sthen. ok sthen
Drop the ability to have a list of keys in the prefix in favour of two
separate options, prefix and prefix2. This simplifies the code and gets
rid the data options type which was only used for this one option.
Also add a -2 flag to send-prefix to send the secondary prefix key,
fixing a cause of minor irritation.
People who want three prefix keys are out of luck :-).
separate options, prefix and prefix2. This simplifies the code and gets
rid the data options type which was only used for this one option.
Also add a -2 flag to send-prefix to send the secondary prefix key,
fixing a cause of minor irritation.
People who want three prefix keys are out of luck :-).
Show how to set default-path to revert to tmux's old behaviour of opening
new windows in the current working directory at the time tmux was started,
it's not obvious. naddy@ agrees this is a useful inclusion.
Allow $HOME as default-path in tmux.conf so the same config file can be used
on different machines regardless of where the user's home directory is.
ok nicm
default-path isn't empty, it is used. Otherwise:
1) If tmux neww is run from the command line, the working directory of the
client is used.
2) Otherwise use some platform specific code to retrieve the current working
directory of the process in the active pane.
3) If that fails, the directory where the session was created is used.
Idea and support code, Linux, Solaris, FreeBSD bits by Romain Francoise,
OpenBSD bits by me.
default-path isn't empty, it is used. Otherwise:
1) If tmux neww is run from the command line, the working directory of the
client is used.
2) Otherwise sysctl KERN_PROC_CWD is used to retrieve the current
working directory of the process in the active pane.
3) If that fails, the directory where the session was created is used.
Support code by Romain Francois, OpenBSD specific bits by me.
Note this requires a recent userland and kernel with KERN_PROC_CWD.
Didn't really think the else behaviour through - requiring argv to
contain "else" is silly so just omit that, also some manpage
tweaks. From Tiago Cunha.
Add initial framework for more powerful formatting of command output and
use it for list-{panes,windows,sessions}. This allows more descriptive
replacements (such as #{session_name}) and conditionals.
Later this will be used for status_replace and list-keys and other
places.
use it for list-{panes,windows,sessions}. This allows more descriptive
replacements (such as #{session_name}) and conditionals.
Later this will be used for status_replace and list-keys and other
places.
Extend the mode-mouse option to add a third choice which means the mouse
does not enter copy mode. Patch from SF bug 3374493.
In future the mode-mouse option is likely to die and be broken into
several smaller options.
Make confirm-before prompt customizable with -p option like
command-prompt. Also move responsibility for calling status_replace into
status_prompt_{set,update} and add #W and #P to the default kill-window
and kill-pane prompts. By Tiago Cunha.
command-prompt. Also move responsibility for calling status_replace into
status_prompt_{set,update} and add #W and #P to the default kill-window
and kill-pane prompts. By Tiago Cunha.
Support xterm(1) cursor colour change sequences through terminfo(5) Cc
(set) and Cr (reset) extensions. Originally by Sean Estabrooks, tweaked
by me and Ailin Nemui.
Support setting the xterm clipboard when copying from copy mode using
the xterm escape sequence for the purpose (if xterm is configured to
allow it).
Written by and much discussed Ailin Nemui, guidance on
xterm/termcap/terminfo from Thomas Dickey.
Use the tsl and fsl terminfo(5) capabilities to update terminal title
and automatically fill them in on terminals with the XT capability
(which means their title setting is xterm-compatible). From hsim at
gmx.li.
the xterm escape sequence for the purpose (if xterm is configured to
allow it).
Written by and much discussed Ailin Nemui, guidance on
xterm/termcap/terminfo from Thomas Dickey.
When mode-mouse is on (it is off by default), automatically enter copy
mode when the mouse is dragged or the mouse wheel is used. Also exit
copy mode when the mouse wheel is scrolled off the bottom. Discussed
with and written by hsim at gmx dot li.
mode when the mouse is dragged or the mouse wheel is used. Also exit
copy mode when the mouse wheel is scrolled off the bottom. Discussed
with and written by hsim at gmx dot li.
|Date: 2011/04/18 20:49:05
|Author: nicm
|Branch: HEAD
|Tag: (none)
|Log:
|Add an option (mouse-select-window) which allows the mouse to be used by
|clicking on the status line, written by hsim at gmx dot li.
|Date: 2011/04/05 20:37:01
|Author: nicm
|Branch: HEAD
|Tag: (none)
|Log:
|Add a flag to cmd_find_session so that attach-session can prefer
|unattached sessions when choosing the most recently used (if -t is not
|given). Suggested by claudio@.
|Date: 2011/03/29 20:30:16
|Author: nicm
|Branch: HEAD
|Tag: (none)
|Log:
|Change -t on display-message to be target-pane for the #[A-Z]
|replacements and add -c as target-client.
|Date: 2011/03/29 00:13:00
|Author: nicm
|Branch: HEAD
|Tag: (none)
|Log:
|Add -a and -s options to lsp to list all panes in the server or session
|respectively. Likewise add -s to lsw. From Ben Boeckel.
|Date: 2011/03/28 21:17:39
|Author: nicm
|Branch: HEAD
|Tag: (none)
|Log:
|Allow a start and end line to be specified for capture-pane which may be
|negative to capture part of the history. Prompted by request from Victor
|J Orlikowski.
Date: 2011/03/27 21:27:26
Author: nicm
Branch: HEAD
Tag: (none)
Log:
Give each pane created in a tmux server a unique id (starting from 0),
put it in the TMUX_PANE environment variable and accept it as a
target. Suggested by and with testing and tweaks from Ben Boeckel.
Now that parsing is common, merge some of the small, related commands
together to use the same code.
Also add some arguments (such as -n and -p) to some commands to match
existing commands.
Support for UTF-8 mouse input (\033[1005h). This was added in xterm 262
and supports larger terminals than the older way.
If the new mouse-utf8 option is on, UTF-8 mouse input is enabled for all
UTF-8 terminals. The option defaults to on if LANG etc are set in the
same manner as the utf8 option.
With help and based on code from hsim at gmx.li.
and supports larger terminals than the older way.
If the new mouse-utf8 option is on, UTF-8 mouse input is enabled for all
UTF-8 terminals. The option defaults to on if LANG etc are set in the
same manner as the utf8 option.
With help and based on code from hsim at gmx.li.
Add other-pane-height and other-pane-width options, allowing the width
or height of the smaller panes in the main-horizontal and main-vertical
layouts to be set. Mostly from David Goodlad.
Date: 2010/11/29 19:45:58
Author: nicm
Branch: HEAD
Tag: (none)
Log:
If VISUAL or EDITOR contains "vi", configure mode-keys and status-keys
to vi.
Based on a diff from martynas@, previously requested by a couple of
other people.
Members:
tmux.1:1.190->1.191
tmux.c:1.93->1.94
Date: 2010/11/11 20:54:06
Author: nicm
Branch: HEAD
Tag: (none)
Log:
Flag to flush all key bindings from Rob Paisley.
Members:
cmd-unbind-key.c:1.7->1.8
tmux.1:1.188->1.189
Two new options:
- server option "exit-unattached" makes the server exit when no clients
are attached, even if sessions are present;
- session option "destroy-unattached" destroys a session once no clients
are attached to it.
These are useful for preventing tmux remaining in the background where
it is undesirable and when using tmux as a login shell to keep a limit
on new sessions.
- server option "exit-unattached" makes the server exit when no clients
are attached, even if sessions are present;
- session option "destroy-unattached" destroys a session once no clients
are attached to it.
These are useful for preventing tmux remaining in the background where
it is undesirable and when using tmux as a login shell to keep a limit
on new sessions.
Add -n and -p flags to switch-client to move to the next and previous
session (yes, it doesn't match window/pane, but so what, nor does
switch-client).
Based on a diff long ago from "edsouza".
Custom layouts. list-windows command displays the layout as a string (such as
"bb62,159x48,0,0{79x48,0,0,79x48,80,0}") and it can be applied to another
window (with the same number of panes or fewer) using select-layout.
Store the current working directory in the session, change the default-path
option to default to empty and make that mean that the stored session CWD is
used.
New option, detach-on-destroy, to set what happens to a client when the session
it is attached to is destroyed. If on (the default), it is detached; if off, it
is switched to the most recently active session.
When the mode-mouse option is on, support dragging to make a selection
in copy mode.
Also support the scroll wheel, although xterm strangely does not ignore
it in application mouse mode, causing redraw artifacts when scrolling up
(other terminals appear to be better behaved).
in copy mode.
Also support the scroll wheel, although xterm strangely does not ignore
it in application mouse mode, causing redraw artifacts when scrolling up
(other terminals appear to be better behaved).
Identical behaviour to select-prompt can now be obtained with
command-prompt, so remove select-prompt and change ' to be bound to
command-prompt -p index "select-window -t :%%".
Permit keys in copy mode to be prefixed by a repeat count, entered with
[1-9] in vi mode, or M-[1-9] in emacs mode.
From Micah Cowan, tweaked a little by me.
vi-style B, W and E keys in copy mode to navigate between words treating only
spaces as word separators. Also add . to the list of word separators for
standard word navigation.
From Micah Cowan, tweaked slightly by me.
Permit !, + and - to be used for window targets to specify last window (!), or
next and previous window by number (+ and -).
Also tidy an if in cmd-new-window.c.
Add "server options" which are server-wide and not bound to a session or
window. Set and displayed with "set -s" and "show -s".
Currently the only option is "quiet" (like command-line -q, allowing it to be
set from .tmux.conf), but others will come along.
window. Set and displayed with "set -s" and "show -s".
Currently the only option is "quiet" (like command-line -q, allowing it to be
set from .tmux.conf), but others will come along.
Massive spaces->tabs and trailing whitespace cleanup, hopefully for the last
time now I've configured emacs to make them displayed in really annoying
colours...
Eliminate duplicate code and ease the passage for server-wide options by adding
a -w flag to set-option and show-options and making setw and showw aliases to
set -w and show -w.
Note: setw and showw are still there, but now aliases for set -w and show -w.
a -w flag to set-option and show-options and making setw and showw aliases to
set -w and show -w.
Note: setw and showw are still there, but now aliases for set -w and show -w.
Add a -p flag to display-message to print the output rather than displaying in
the status line, this allows things like "display -p '#W'" to find the current
window index.
Two new options, window-status-format and window-status-current-format, which
allow the format of each window in the status line window list to be controlled
using similar # sequences as status-left/right.
This diff also moves part of the way towards UTF-8 support in window names but
it isn't quite there yet.
Revert to xterm-keys off by default. It was on as an experiment to see if the
option could be removed, but it affects vi, so we have to keep the option, and
a conservative default is better.
Cleanup by moving various (mostly horrible) little bits handling UTF-8 grid
data into functions in a new file, grid-utf8.c, and use sizeof intead of
UTF8_DATA.
Also nuke trailing whitespace from tmux.1, reminded by jmc.
Add a per-client log of status line messages displayed while that client
exists. A new message-limit session option sets the maximum number of entries
and a command, show-messages, shows the log (bound to ~ by default).
This (and prompt history) might be better as a single global log but until
there are global options it is easier for them to be per client.
allow the format of each window in the status line window list to be controlled
using similar # sequences as status-left/right.
This diff also moves part of the way towards UTF-8 support in window names but
it isn't quite there yet.
exists. A new message-limit session option sets the maximum number of entries
and a command, show-messages, shows the log (bound to ~ by default).
This (and prompt history) might be better as a single global log but until
there are global options it is easier for them to be per client.
There is no real standard for modifier plus function keys. Previously, tmux
output some from rxvt but in other ways did the same as xterm or other
terminals, but this is a bit inconsistent.
xterm's method is fairly sensible and we already support it (xterm-keys), so
enable it by default instead.
output some from rxvt but in other ways did the same as xterm or other
terminals, but this is a bit inconsistent.
xterm's method is fairly sensible and we already support it (xterm-keys), so
enable it by default instead.
Add an activity time for clients, like for sessions, and change session and
client lookup to pick the most recently used rather than the most recently
created - this is much more useful when used interactively and (because the
activity time is set at creation) should have no effect on source-file.
Based on a problem reported by Jan Johansson.
client lookup to pick the most recently used rather than the most recently
created - this is much more useful when used interactively and (because the
activity time is set at creation) should have no effect on source-file.
Based on a problem reported by Jan Johansson.
[ is a punctuation character and should be escaped with Ql. Although the
current groff version we have seems to handle it fine, other versions are not
so tolerant.
Add mode keys to move the cursor to the top, middle and bottom of the screen.
H/M/L in vi mode and M-R/M-r in emacs (bottom of screen not bound in emacs).
Add a pipe-pane command to allow a pane to be piped to a shell command, for
example:
pipe-pane 'cat >~/out'
No arguments stops outputing and closes the pipe; the -o flag toggles a pipe
and on and off (useful for key bindings).
Suggested by espie@.
Rather than running status-left, status-right and window title #() with popen
immediately every redraw, queue them up and run them in the background,
starting each once every status-interval. The actual status line uses the
output from the last run.
This brings several advantages:
- tmux itself may be called from inside #() without causing the server to hang;
- likewise, sleep or similar doesn't cause the server to block;
- commands aren't run excessively often when redrawing;
- commands shared by status-left and status-right, or used multiple times, will
only be run once.
run-shell and if-shell still use system()/popen() but will be changed over to
use this too later.
New option, mouse-select-pane. If on, the mouse may be used to select the
current pane.
Suggested by sthen@ and also by someone else ages ago who I have forgotten.
Add "grouped sessions" which have independent name, options, current window and
so on but where the linked windows are synchronized (ie creating, killing
windows and so on are mirrored between the sessions). A grouped session may be
created by passing -t to new-session.
Had this around for a while, tested by a couple of people.
Support for individual session idle time locking. May be enabled by turning off
the lock-server option (it is on by default). When this is off, each session
locks when it has been idle for the lock-after-time setting. When on, the
entire server locks when ALL sessions have been idle for their individual
lock-after-time settings.
This replaces one global-only option (lock-after-time) with another
(lock-server), but the default behaviour is usually preferable so there don't
seem to be many alternatives.
Diff/idea largely from Thomas Adam, tweaked by me.
example:
pipe-pane 'cat >~/out'
No arguments stops outputing and closes the pipe; the -o flag toggles a pipe
and on and off (useful for key bindings).
Suggested by espie@.
immediately every redraw, queue them up and run them in the background,
starting each once every status-interval. The actual status line uses the
output from the last run.
This brings several advantages:
- tmux itself may be called from inside #() without causing the server to hang;
- likewise, sleep or similar doesn't cause the server to block;
- commands aren't run excessively often when redrawing;
- commands shared by status-left and status-right, or used multiple times, will
only be run once.
run-shell and if-shell still use system()/popen() but will be changed over to
use this too later.
so on but where the linked windows are synchronized (ie creating, killing
windows and so on are mirrored between the sessions). A grouped session may be
created by passing -t to new-session.
Had this around for a while, tested by a couple of people.
the lock-server option (it is on by default). When this is off, each session
locks when it has been idle for the lock-after-time setting. When on, the
entire server locks when ALL sessions have been idle for their individual
lock-after-time settings.
This replaces one global-only option (lock-after-time) with another
(lock-server), but the default behaviour is usually preferable so there don't
seem to be many alternatives.
Diff/idea largely from Thomas Adam, tweaked by me.
Add a simple synchronize-panes window option: when set, all input to any pane
that is part of the window is also sent to all other panes in the same
window. Suggested by several, most recently Tomasz Pajor.
Make C-Up and C-Down in copy mode scroll the screen up and down one line
without moving the cursor, like Up and Down in scroll mode (which will shortly
disappear).
Support -c like sh(1) to execute a command, useful when tmux is a login
shell. Suggested by halex@.
This includes another protocol version increase (the last for now) so again
restart the tmux server before upgrading.
Remove the internal tmux locking and instead detach each client and run the
command specified by a new option "lock-command" (by default "lock -np") in
each client.
This means each terminal has to be unlocked individually but simplifies the
code and allows the system password to be used to unlock.
Note that the set-password command is gone, so it will need to be removed from
configuration files, and the -U command line flag has been removed.
This is the third protocol version change so again it is best to stop the tmux
server before upgrading.
command specified by a new option "lock-command" (by default "lock -np") in
each client.
This means each terminal has to be unlocked individually but simplifies the
code and allows the system password to be used to unlock.
Note that the set-password command is gone, so it will need to be removed from
configuration files, and the -U command line flag has been removed.
This is the third protocol version change so again it is best to stop the tmux
server before upgrading.
Permit multiple prefix keys to be defined, separated by commas, for example:
set -g prefix ^a,^b
Any key in the list acts as the prefix. The send-prefix command always sends
the first key in the list.
New option, set-titles-string, to allow the window title to be specified (as
for status-left/right) if set-titles is on. Also only update the title when the
status line is being redrawn.
When using tmux as a login shell, there is currently no way to specify a shell
to be used as a login shell inside tmux, so add a default-shell session option.
This sets the shell invoked as a login shell when the default-command option is
empty.
The default option value is whichever of $SHELL, getpwuid(getuid())'s pw_shell
or /bin/sh is valid first.
Based on a diff from martynas@, changed by me to be a session option rather
than a window option.
to be used as a login shell inside tmux, so add a default-shell session option.
This sets the shell invoked as a login shell when the default-command option is
empty.
The default option value is whichever of $SHELL, getpwuid(getuid())'s pw_shell
or /bin/sh is valid first.
Based on a diff from martynas@, changed by me to be a session option rather
than a window option.
Add a new display-panes command, with two options (display-panes-colour and
display-panes-time), which displays a visual indication of the number of each
pane.
Add a choose-client command and extend choose-{session,window} to accept a
template. After a choice is made, %% (or %1) in the template is replaced by the
name of the session, window or client suitable for -t and the result executed
as a command. So, for example, "choose-window "killw -t '%%'"" will kill the
selected window.
The defaults if no template is given are (as now) select-window for
choose-window, switch-client for choose-session, and detach-client for
choose-client (now bound to D).
template. After a choice is made, %% (or %1) in the template is replaced by the
name of the session, window or client suitable for -t and the result executed
as a command. So, for example, "choose-window "killw -t '%%'"" will kill the
selected window.
The defaults if no template is given are (as now) select-window for
choose-window, switch-client for choose-session, and detach-client for
choose-client (now bound to D).
Add some other obvious variables to update-environment (WINDOWID SSH_ASKPASS
SSH_AUTH_SOCK SSH_AGENT_PID SSH_CONNECTION) so they are updated in the session
environment on new/attach.
Extend command-prompt with a -p option which is a comma-separated list of one
or more prompts to present in order.
The responses to the prompt are replaced in the template string: %% are
replaced in order, so the first prompt replaces the first %%, the second
replaces the second, and so on. In addition, %1 up to %9 are replaced with the
responses to the first the ninth prompts
The default template is "%1" so the response to the first prompt is processed
as a command.
Note that this changes the behaviour for %% so if there is only one prompt,
only the first %% will be replaced. Templates such as "neww -n '%%' 'ssh %%'"
should be changed to "neww -n '%1' 'ssh %1'".
From Tiago Cunha.
Now that pane targets (-t) are supported, switch some commands to use them
where it makes sense: clock-mode, copy-mode, scroll-mode, send-keys,
send-prefix.
Add (naive) searching and goto line in copy mode. Searching is C-r and C-s with
emacs keys, / and ? with vi; n repeats the search again with either key
set. All searching wraps the top/bottom. Goto line is g for both emacs and vi.
The search prompts don't have full line editing, just simple append and delete
characters.
Also sort the mode keys list in tmux.1.
or more prompts to present in order.
The responses to the prompt are replaced in the template string: %% are
replaced in order, so the first prompt replaces the first %%, the second
replaces the second, and so on. In addition, %1 up to %9 are replaced with the
responses to the first the ninth prompts
The default template is "%1" so the response to the first prompt is processed
as a command.
Note that this changes the behaviour for %% so if there is only one prompt,
only the first %% will be replaced. Templates such as "neww -n '%%' 'ssh %%'"
should be changed to "neww -n '%1' 'ssh %1'".
From Tiago Cunha.
emacs keys, / and ? with vi; n repeats the search again with either key
set. All searching wraps the top/bottom. Goto line is g for both emacs and vi.
The search prompts don't have full line editing, just simple append and delete
characters.
Also sort the mode keys list in tmux.1.
When creating a new session from the command-line where there is an external
terminal, copy the termios(4) special characters and use them for new windows
created in the new session. Suggested by Theo.
Infrastructure and commands to manage the environment for processes started
within tmux.
There is a global environment, copied from the external environment when the
server is started and each session has an (initially empty) session
environment which overrides it.
New commands set-environment and show-environment manipulate or display the
environments.
A new session option, update-environment, is a space-separated list of
variables which are updated from the external environment into the session
environment every time a new session is created - the default is DISPLAY.
If there is an error in the configuration file, don't just exit(1) as this can
cause the client to hang. Instead, send the error message, then mark the client
as bad and start a normal shutdown so the server exits once the error is
written.
This also allows some code duplicating daemon(3) to be trimmed and logging to
begin earlier.
Prompted by Theo noticing the behaviour on error wasn't documented.
within tmux.
There is a global environment, copied from the external environment when the
server is started and each sesssion has an (initially empty) session
environment which overrides it.
New commands set-environment and show-environment manipulate or display the
environments.
A new session option, update-environment, is a space-separated list of
variables which are updated from the external environment into the session
environment every time a new session is created - the default is DISPLAY.
cause the client to hang. Instead, send the error message, then mark the client
as bad and start a normal shutdown so the server exits once the error is
written.
This also allows some code duplicating daemon(3) to be trimmed and logging to
begin earlier.
Prompted by Theo noticing the behaviour on error wasn't documented.
to be overridden. The 88col/256col checks are now moved into the default
setting and out of the code.
Also remove a couple of old workarounds for xterm and rxvt which are no longer
necessary (tmux can emulate them if missing).
Merge pane number into the target specification for pane commands. Instead of
using -p index, a target pane is now addressed with the normal -t window form
but suffixed with a period and a pane index, for example :0.2 or
mysess:mywin.1. An unadorned number such as -t 1 is tried as a pane index in
the current window, if that fails the same rules are followed as for a target
window and the current pane in that window used.
As a side-effect this now means that swap-pane can swap panes between
different windows.
Note that this changes the syntax of the break-pane, clear-history, kill-pane,
resize-pane, select-pane and swap-pane commands.
using -p index, a target pane is now addressed with the normal -t window form
but suffixed with a period and a pane index, for example :0.2 or
mysess:mywin.1. An unadorned number such as -t 1 is tried as a pane index in
the current window, if that fails the same rules are followed as for a target
window and the current pane in that window used.
As a side-effect this now means that swap-pane can swap panes between different
windows.
Note that this changes the syntax of the break-pane, clear-history, kill-pane,
resize-pane, select-pane and swap-pane commands.
Next step towards customisable mode keys: build each default table of keys
into a named tree on start and use that for lookups. Also add command to string
translation tables and modify list-keys to show the mode key bindings (new
-t argument).
a named tree on start and use that for lookups. Also add command to string
translation tables and modify list-keys to show the the mode key bindings (new
-t argument).
Permit commands to be bound to key presses without the prefix key first. The
new -n flag to bind-key and unbind-key sets or removes these bindings, and
list-key shows them in []s.
up-pane and down-pane no longer auto-repeat; update the description of
repeat-time accordingly. ok nicm@
if you prefer old behaviour;
bind -r Up up-pane
bind -r Down down-pane
Tidy the target parsing code a bit and correct the behaviour so that as before
a string with no colon as a target window is first looked up as a window then
as a session, noted by Iain Morgan.
Also attempt to clarify the description of the target specification in the man
page.
a string with no colon as a target window is first looked up as a window then
as a session, noted by Iain Morgan.
Also attempt to clarify the description of the target specification in the man
page.
