15253448af
Tweak text to mention initial size, from John Hood.
2017-05-29 07:46:32 +00:00
b519551153
Expand formats in option names and add -F flag to do so in option values as well.
2017-05-10 13:05:41 +00:00
5fee4638e0
Add a format for the name of the pane's mode, lets it be used as a
...
conditional for key bindings.
2017-05-07 22:27:57 +00:00
2fef10b9ac
Add some formats to look at the session window stack, suggested by Scott
...
ROCHFORD.
2017-05-05 11:59:47 +00:00
d98d316903
Some new notifications, mainly for active pane and current window and
...
session:
pane-mode-changed
window-pane-changed
client-session-changed
session-window-changed
From Joshua Brot.
2017-05-04 07:16:43 +00:00
ca6a121e63
Add a format for the last search string in copy mode and fix the prompt
...
so it can work when in -I, suggested by Suraj N Kurapati.
2017-05-03 05:53:34 +00:00
c12711affd
Default for xterm-keys was wrong, stop documenting it.
2017-04-28 13:39:59 +00:00
59ff9b8128
Typo in example.
2017-04-22 06:15:22 +00:00
0b44ad99b5
If a #() command doesn't exit, use its most recent line of output (it
...
must be a full line). Don't let it redraw the status line more than once
a second.
Requested by someone about 10 years ago...
2017-04-20 09:20:22 +00:00
fa6deb5866
When the data we have buffered to write to a terminal grows beyond a
...
reasonable amount (currently width * height * 8 bytes), discard all
output to the terminal and start trying to redraw periodically
instead. Continue with this until the amount of data we are trying to
write falls to a low level again.
This helps to prevent tmux sitting on a huge buffer of data when there
are processes with fast output running inside tmux but the outside
terminal is slow.
A new client_discarded format holds the amount of data that has been
discarded due to this mechanism.
The three variables (when to start this, when to stop, and how often to
redraw) are basically "works for me" at the moment, this is going in to
see how it goes and if it causes problems for anyone else.
2017-04-19 06:52:27 +00:00
fb3c5efa50
Add a format for number of bytes writtent to client, useful for debugging.
2017-04-18 15:44:17 +00:00
9b28200578
Give each client a name. This defaults to the tty name as before but
...
falls back to an alternative if the tty name is not available. This is
clearer than overloading the client ttyname member and allows us to
remove the path stored in the tty struct, it should always be the same
as the client.
2017-04-05 10:49:46 +00:00
df3ab87964
Add support for the strikethrough attribute (SGR 9), using the new smxx
...
terminfo capability. This means there are now nine attribute bits, so
anything above 0xff uses an extended cell.
2017-03-22 07:16:54 +00:00
640d9e54b7
"status bar" -> "status line" for consistency, from Benjamin Dopplinger.
2017-02-15 08:47:55 +00:00
d22c15107b
Don't use a bufferevent for the tty, so we can keep better track of what
...
is being written and when.
Also a manpage typo fix from jmc@.
2017-02-10 12:59:18 +00:00
c6a3446398
Instead of numbering session groups, give them a name which may be given
...
to -t instead of a target session. Also allow them to contain only one
session.
2017-02-09 15:04:53 +00:00
8de4c15dfa
Document refresh-client -C.
2017-02-09 14:49:00 +00:00
b7ddfb39f3
Don't lie about the default size in the man page.
2017-02-09 12:00:42 +00:00
dd0c814779
Implement "all event" (1003) mouse mode but in a way that works. The
...
main issue is that if we have two panes, A with 1002 and B with 1003, we
need to set 1003 outside tmux in order to get all the mouse events, but
then we need to suppress the ones that pane A doesn't want. This is easy
in SGR mouse mode, because buttons == 3 is only used for movement events
(for other events the trailing m/M marks a release instead), but in
normal mouse mode we can't tell so easily. So for that, look at the
previous event instead - if it is drag+release as well, then the current
event is a movement event.
2017-02-01 09:55:07 +00:00
b6099f31ea
Add -n to break-pane.
2017-01-29 22:10:55 +00:00
0a63ab4f0f
If xterm-keys is on, use xterm(1) style keys for Home and End as well as
...
modified keys.
2017-01-25 14:24:54 +00:00
4b2821ff98
Make update-environment an array as well.
2017-01-24 20:15:32 +00:00
b77dd75b57
Convert terminal-overrides to an array option.
2017-01-24 20:05:15 +00:00
16e43d6a42
Remove some lies about terminal-overrides from tmux.1.
2017-01-24 20:01:34 +00:00
85338bb75f
Add support for custom command aliases, this is an array option which
...
contains items of the form "alias=command". This is consulted when an
unknown command is parsed.
2017-01-24 19:53:37 +00:00
95950bf668
Add -E to detach-client to exec a command to replace the client instead
...
of exiting it, useful if tmux wasn't exec'd itself. From Jenna Magius.
2017-01-13 10:12:12 +00:00
bf6a5c056d
Add a format for terminal type.
2017-01-11 16:09:57 +00:00
e78142232f
Some manpage fixes: rephrase a convoluted sentence, make the names of
...
some keys more standard, and use Ql instead of Dq.
2017-01-10 10:08:59 +00:00
40fddfbdd6
avoid unneccessary markup; tweaked and ok nicm
2017-01-10 07:55:48 +00:00
d2d984647e
Add %if/%endif for conditionals when parsing configuration files, the
...
argument is a format (the new == and != are useful).
2017-01-09 21:28:56 +00:00
844f2eacf4
Add simple comparisons in formats: #{==:a,b} and #{!=:a,b} ("a" and "b"
...
are expanded so can compare formats). And expand the condition to
#{?a,b,c} (the "a" part) if it doesn't work as a simple lookup.
Also add FORMAT_NOJOBS flag to disable jobs in a format.
2017-01-09 21:03:25 +00:00
5330a2a85d
Run the source-file pattern through glob(3).
2017-01-09 19:27:00 +00:00
c05002b0f2
Add note about ccc and initc so people who want it can see it is
...
possible.
2017-01-07 15:40:23 +00:00
461217d0f0
Incremental search in copy mode (on for emacs keys by default) - much
...
the same as normal searching but updates the cursor position and marked
search terms as you type. C-r and C-s in the prompt repeat the search,
once finished searching (with Enter), N and n work as before.
2017-01-06 11:57:03 +00:00
6b46c62bb4
Make send -N work for all keys, not just in copy mode. From Artem Fokin.
2016-11-29 12:54:46 +00:00
7e6c2cb238
Make the selection able to exist independent of the cursor position, so
...
that it is not affected by scrolling. If MouseDragEnd1Pane is bound to
the new "stop-selection" command:
bind -Tcopy-mode MouseDragEnd1Pane stop-selection
A selection made with the mouse will stay as it is after button 1 is
released. (It also works bound to a key.)
From Artem Fokin.
2016-11-24 13:38:44 +00:00
9fe43d6acb
Add copy-pipe-and-cancel, from Artem Fokin.
2016-11-15 09:53:23 +00:00
8084a2c9e6
Add %%% to substitute with quotes escaped (convert " to \"). Use this
...
for the prompts in copy mode. Fixes problems with jumping to ' reported
by Theo Buehler.
2016-10-21 13:51:59 +00:00
fb109ae97d
xterm-keys was in the wrong place in the list; Dilyan Palauzov.
2016-10-18 19:25:26 +00:00
41e633acf5
Use the notify name string instead of going via an enum and change
...
existing hooks to use notifys instead.
2016-10-16 22:06:40 +00:00
d15d54c2c8
Add hook_session and hook_window formats to get information on the
...
affected session or window when a hook fires. Enable session-created and
session-closed hooks now that that is available.
2016-10-16 19:55:52 +00:00
ddc4512d2e
Rewrite command queue handling. Each client still has a command queue,
...
but there is also now a global command queue. Instead of command queues
being dispatched on demand from wherever the command happens to be
added, they are now all dispatched from the top level server
loop. Command queues may now also include callbacks as well as commands,
and items may be inserted after the current command as well as at the end.
This all makes command queues significantly more predictable and easier
to use, and avoids the complex multiple nested command queues used by
source-file, if-shell and friends.
A mass rename of struct cmdq to a better name (cmdq_item probably) is
coming.
2016-10-16 17:55:14 +00:00
4fbf564292
zap double .Pp;
2016-10-15 12:34:02 +00:00
63b2547a02
Fire hooks on the simple notifys (window-renamed and session-renamed),
...
the complicated ones get no hooks for now (more to come).
2016-10-15 00:09:30 +00:00
0ec18e537d
Missing flags in capture-pane, and tweak choose-tree text. From Dilyan Palauzov.
2016-10-14 17:40:47 +00:00
4289a1ebfa
Trying to do hooks generically is way too complicated and unreliable and
...
confusing, particularly trying to automatically figure out what target
hooks should be using. So simplify it:
- drop before hooks entirely, they don't seem to be very useful;
- commands with special requirements now fire their own after hook (for
example, if they change session or window, or if they have -t and -s
and need to choose which one the hook uses as current target);
- commands with no special requirements can have the CMD_AFTERHOOK flag
added and they will use the -t state.
At the moment new-session, new-window, split-window fire their own hook,
and display-message uses the flag. The remaining commands still need to
be looked at.
2016-10-13 22:48:51 +00:00
7a1a01feef
Remove the set-remain-on-exit option, it was always a hack and can now
...
be done with hooks instead.
2016-10-13 21:37:03 +00:00
1bd08f903b
Remove mention of key tables than no longer exist.
2016-10-13 20:09:19 +00:00
05dac2e42c
-f missed from splitw usage, from Felix Rosencrantz.
2016-10-13 09:06:48 +00:00
40253048ca
bind-key -c has gone, remove from man page, and unused table declarations.
2016-10-12 15:26:37 +00:00
c484c5a2a1
Drop the edit mode key tables and just use fixed key bindings for the
...
command prompt.
2016-10-12 14:50:14 +00:00
68bebe1fb7
The repeat prompt in both emacs and vi (and the old one in tmux) doesn't
...
support line editing and instead executes a command as soon as a
non-number key is pressed. Add a -N flag to command-prompt for the same
in copy mode. Reported by Theo Buehler.
2016-10-12 13:03:27 +00:00
85d7afaefc
Support double and triple clicks (they are cumulative, so double is
...
fired then triple), and use for select-word and select-line in copy
mode. Inspired by a different solution from Omar Sandoval.
2016-10-11 09:30:36 +00:00
76d6d3641f
Fundamental change to how copy mode key bindings work:
...
The vi-copy and emacs-copy mode key tables are gone, and instead copy
mode commands are bound in one of two normal key tables ("copy-mode" or
"copy-mode-vi"). Keys are bound to "send-keys -X copy-mode-command". So:
bind -temacs-copy C-Up scroll-up
bind -temacs-copy -R5 WheelUpPane scroll-up
Becomes:
bind -Tcopy-mode C-Up send -X scroll-up
bind -Tcopy-mode WheelUpPane send -N5 -X scroll-up
This allows the full command parser and command set to be used - for
example, we can use the normal command prompt for searching, jumping,
and so on instead of a custom one:
bind -Tcopy-mode C-r command-prompt -p'search up' "send -X search-backward '%%'"
command-prompt also gets a -1 option to only require on key press, which
is needed for jumping.
The plan is to get rid of mode keys entirely, so more to come eventually.
2016-10-11 07:23:34 +00:00
305c832a97
Document set-hook -u.
2016-10-03 20:58:39 +00:00
2e5584c2b4
Allow repeat count to be specified in mode key tables with bind-key -R,
...
and set the default repeat count to 5 for WheelUp and WheelDown in
copy-mode.
2016-09-12 15:40:58 +00:00
fed1e384ad
Add support for performing a full width split (with splitw -f), rather
...
than splitting the current cell. From Stephen Kent.
2016-09-04 17:37:06 +00:00
43f292b2e0
Two minor fixes from dilyan palauzov.
2016-08-22 20:07:58 +00:00
f811127bb6
We only replace the first %%, not multiple (use %2 for second).
2016-08-03 09:08:40 +00:00
325cbe90d9
Allow a command to be specified to display-panes, similar to
...
command-prompt, rather than always just selecting the pane.
2016-06-16 10:55:47 +00:00
0c7ddae2ab
Add missing buffer_name format, from Awal Garg.
2016-06-15 14:43:06 +00:00
068b8b03ad
Add -F to list-commands.
2016-06-15 08:54:11 +00:00
fdd368a294
- Rework load_cfg() error handling a little.
...
- Add -q to source-file to suppress errors about nonexistent files.
Input and OK nicm@
2016-05-12 16:05:33 +00:00
87be2da4e1
Missing format (window_activity_flag) and a missing Ta.
2016-05-01 11:46:12 +00:00
0c7895076e
tweak previous;
2016-04-29 20:57:10 +00:00
eb8e76d433
Compact a small table into text.
2016-04-29 15:58:52 +00:00
0509be0740
Add option to include status text in the pane borders. If
...
pane-border-status is set to "top" or "bottom" (rather than "off"),
every pane has a permanent top or bottom border containing the text from
pane-border-format.
Based on a diff sent long ago by Jonathan Slenders, mostly rewritten and
simplified by me.
2016-04-29 15:00:48 +00:00
0d84fdd953
Final parts of command hooks, add before- and after- hooks to each command.
2016-04-29 14:05:24 +00:00
1cedf78284
Add next/previous paragraph, from J Raynor.
2016-04-27 09:39:09 +00:00
fa97b0a95b
Instead of reusing MouseUp at the finish of a drag, add a new key
...
MouseDragEnd. It can be useful to bind them separately in copy mode.
2016-03-18 07:28:27 +00:00
c7851e0ee7
Fix break-pane synopsis and some other tmux.1 bits.
2016-03-01 11:58:45 +00:00
8028560f82
Support negative trim values (#{=-10:pane_title}) to trim from the end,
...
suggested by Kevin Brubeck Unhammer.
2016-01-31 09:54:46 +00:00
427b820426
Support for RGB colour, using the extended cell mechanism to avoid
...
wasting unnecessary space. The 'Tc' flag must be set in the external
TERM entry (using terminal-overrides or a custom terminfo entry), if not
tmux will map to the closest of the 256 or 16 colour palettes.
Mostly from Suraj N Kurapati, based on a diff originally by someone else.
2016-01-29 11:13:56 +00:00
995af0e2b7
I no longer use my SourceForge address so replace it.
2016-01-19 15:59:12 +00:00
c9815307eb
Add hooks for alerts (bell, silence, activity), from Thomas Adam.
2016-01-16 00:36:53 +00:00
021c64310d
Add infrastructure to work out the best target given a pane or window
...
alone and use it to add pane_died and pane_exited hooks.
2015-12-16 21:50:37 +00:00
5ed17e84fa
Add key-table option to set the default key table for a session, allows
...
different key bindings for different sessions and a few other things.
2015-12-12 18:32:24 +00:00
39cf9c9d31
Allow prefix and prefix2 to be set to None to disable (useful if you
...
would rather bind the prefix in the root table).
2015-12-12 18:19:00 +00:00
f2be3ad46f
Mention {src,dst}-{window,pane} where we define target-{window,pane}.
2015-12-11 16:27:01 +00:00
01831da5f5
Add cmdq as an argument to format_create and add a format for the
...
command name (will also be used for more later).
2015-12-11 12:27:36 +00:00
1f94274b92
Ed was meant to be El;
2015-12-08 06:42:07 +00:00
d2fb0efcd1
Add hooks infrastructure, basic commands (set-hook, show-hooks) and a
...
couple of not very useful client hooks. This will eventually let
commands be run at various points and on notifications. Joint work with
Thomas Adam.
2015-12-08 01:10:31 +00:00
1d331c7e62
Delete a duplicated line
...
ok jmc@
2015-11-29 17:06:59 +00:00
62d3af17f9
Make environ_set va_args and use it to tidy up some calls. Also add a
...
missing word in manpage (from jmc).
2015-11-24 23:46:15 +00:00
c18fbefe93
Document socket_path format.
2015-11-24 22:27:59 +00:00
1e2df2d464
Remove the -I part of show-messages which isn't really that useful; the
...
server start time can now be accessed with a new start_time format (use:
tmux display -p '#{t:start_time}')
2015-11-24 21:52:06 +00:00
4ec61bef46
Fix usage of detach-client.
2015-11-24 20:40:51 +00:00
4fcc02ee9d
If display-time is set to 0, show status messages until a key is pressed;
...
OK nicm@
2015-11-22 18:28:01 +00:00
5a5b950e8b
Add s/foo/bar/: prefix for formats to substitute bar for foo.
2015-11-18 14:13:55 +00:00
531869bd92
Add window_visible_layout which ignores zoomed panes and use it for
...
control mode (which needs to know all panes), from George Nachman.
2015-11-13 10:00:26 +00:00
1da7475d0e
tweak previous; ok nicm
2015-11-12 12:36:34 +00:00
1b86f520ea
Nuke the utf8 and status-utf8 options and make tmux only a UTF-8
...
terminal. We still support non-UTF-8 terminals outside tmux, but inside
it is always UTF-8 (as when the utf8 and status-utf8 options were on).
2015-11-12 11:09:11 +00:00
a0f3999ce7
Remove the mouse_utf8_flag format as well.
2015-11-12 11:07:10 +00:00
00c34df186
Drop mouse-utf8 option and always turn on UTF-8 mouse if the client says
...
it supports UTF-8.
2015-11-11 23:23:33 +00:00
67c3a014b9
No more TMPDIR.
2015-10-27 14:51:35 +00:00
c582f7d177
space before punctuation;
2015-10-26 00:15:37 +00:00
e65306d8e7
Extend the modifiers allowed before formats: as well as the existing
...
#{=10:...} length limit, add #{t:...} to convert a time_t format to a
string, #{b:...} for basename and #{d:...} for dirname. Remove all the
foo_string time formats as they can now be replaced by "t:", for example
#{window_activity_string} becomes #{t:window_activity}.
2015-10-25 22:29:17 +00:00
14da999408
Format for scroll position, from Jorge Morante.
2015-10-23 16:02:21 +00:00
60ca29df64
client_key_table was missing.
2015-10-21 13:14:36 +00:00
901c2eb20a
Add copy-mode -e to exit copy mode when scrolling off the bottom, useful
...
for quick view of history, from Cam Hutchison.
2015-09-13 13:31:40 +00:00
cfabe30bec
Add session_last_attached time and format, from Sina Siadat.
2015-09-10 08:58:14 +00:00
675def0396
Remove the lock-server option which is a bit redundant, it isn't that
...
different without it.
2015-08-28 12:31:55 +00:00
13b7fd82c1
Rename left/right/up/down relative to active pane to add -of suffix
...
(left-of/right-of/etc) to remove conflict with left/right meaning
leftmost or rightmost pane. From Ben Boeckel.
2015-08-12 08:55:20 +00:00
d33adc4fd0
Make -q suppress ambiguous option warnings too, from Cam Hutchison.
2015-07-27 08:45:45 +00:00
92af3766ec
Add an option (history-file) for a file to save/restore command prompt
...
history, from Olof-Joachim Frahm.
2015-07-20 15:50:04 +00:00
d4ce210713
Correct the tsl/fsl sequence to ]0 not ]2 (from Marcel Korpel). While
...
here, Xr xterm and remove some advice about elinks that is better
elsewhere.
2015-07-20 10:34:11 +00:00
81069f66f9
Add a format to show if client is a control client. From Bruno Sutic.
2015-07-13 15:37:26 +00:00
6308c48efd
Add a -s flag to show-environment to output Bourne shell commands a la
...
ssh-agent. Mostly from Cam Hutchison with some changes by me.
2015-07-13 13:36:29 +00:00
164ba041c9
Remove a stray : and tweak paragraph.
2015-06-18 23:53:56 +00:00
85120b37ea
Change break-pane to take target and source panes (-t and -s) in line
...
with other commands, from Thomas Adam.
2015-06-17 19:56:08 +00:00
0ff335961e
Move the shuffle code from new-window -a into a function and add a -a
...
flag for move-window too. From Thomas Adam.
2015-06-17 16:50:28 +00:00
d96ab34019
Add window_activity format, from Thomas Adam based on a diff originally
...
from propos6 at gmail dot com.
2015-06-15 10:58:01 +00:00
29c29e7717
Add a format for client PID (client_pid) and server PID (pid). Diff for
...
client_pid from Thomas Adam.
2015-06-14 10:07:44 +00:00
c4e811e519
Add -E flag when attaching or switching client to bypass
...
update-environment, from Steven Lu.
2015-06-07 21:39:39 +00:00
4219939c10
Make it so that if a window or session target is prefixed with an =,
...
only an exact name or index match is accepted, no special character,
prefix match, or fnmatch.
2015-06-05 08:14:16 +00:00
dc0d34e137
tweak SYNOPSIS and usage();
2015-06-04 20:34:22 +00:00
4a6c06d6a9
Make unsetting a global option restore it to the default. Diff lying
...
around for a while, I have forgotten who suggested it :-/.
2015-06-04 14:29:33 +00:00
a863834574
Add support for a single "marked pane". There is one marked pane in the
...
server at a time; it may be toggled or cleared with select-pane -m and
-M (the border is highlighted). A new target '~' or '{marked}' specifies
the marked pane to commands and it is the default target for the
swap-pane and join-pane -s flag (this makes them much simpler to use -
mark the source pane and then change to the target pane to run swapp or
joinp).
2015-06-04 11:43:51 +00:00
379400cfa6
Move the jobs output cache into the formats code so that #() work more
...
generally (for example, again working in set-titles-string).
2015-05-27 13:28:04 +00:00
ec34439f9c
Add a session_alerts format which is a list of all the alerts in the
...
current session in symbolic form (something like "0!,4~,5!"). Use this
in the default set-titles-string. Prompted by a request from Jan ONDREJ.
2015-05-12 15:29:29 +00:00
e958db09a7
Add bell-action "other" to pass through bells in all windows except the
...
current, suggested by Jan ONDREJ.
2015-05-12 15:27:46 +00:00
44364d7112
Remove the c0-* options which never really worked satisfactorily. Going
...
to try something else...
2015-05-11 10:10:16 +00:00
c4a4bd6ac5
Move input parser structs into input.c (removing fairly useless
...
saved_cursor_[xy] formats as a side-effect).
2015-05-08 16:18:04 +00:00
31b1ab4852
Add a format window_linked which is 1 if a window has been linked
...
multiple times, also remove the default space in window_flags and use a
conditional to add it in window-status-format (this means additional
flags can be added in the option without extra spaces). From Thomas Adam
with tweaks by me.
2015-05-06 08:35:39 +00:00
7382ba82c5
If default-terminal is set to "screen" or "screen-*", emulate screen's
...
historical (incorrect) behaviour for SGR 3 and send smso
(standout). Previously, we would send sitm (italics) if the terminal
outside had it and smso otherwise. This was acceptably until recently
because xterm's terminfo entry lacked sitm, so most users got smso.
People who want italics should set default-terminal to the forthcoming
"tmux" entry (and be prepared to deal with it being missing on older
hosts).
As a side-effect this changes default-terminal to be a server rather
than a session option.
suggested by and ok naddy
2015-04-29 15:59:08 +00:00
771744426e
Add select-layout -o to undo the last layout change (apply the previously
...
set layout).
2015-04-28 10:43:13 +00:00
95195f5258
Rewrite of the target resolution internals to be simpler and more
...
consistent but with much less duplication, but keeping the same internal
API. Also adds more readable aliases for some of the special tokens used
in targets (eg "{start}" instead of "^"). Some behaviours may have
changed, for example prefix matches now happen before fnmatch.
2015-04-27 16:25:57 +00:00
93b2871cab
Do not die on USR1 if any of the socket parent directories are
...
missing. Reported by Robin Powell.
2015-04-21 22:32:40 +00:00
bded743706
Support for multiple key tables to commands to be bound to sequences of
...
keys. The default key bindings become the "prefix" table and -n the
"root" table. Keys may be bound in new tables with bind -T and
switch-client -T used to specify the table in which the next key should
be looked up. Based on a diff from Keith Amling.
2015-04-20 15:34:56 +00:00
8101f1ef16
tweak previous;
2015-04-19 22:10:30 +00:00
bf635e7741
Rewrite of tmux mouse support which was a mess. Instead of having
...
options for "mouse-this" and "mouse-that", mouse events may be bound as
keys and there is one option "mouse" that turns on mouse support
entirely (set -g mouse on).
See the new MOUSE SUPPORT section of the man page for description of the
key names and new flags (-t= to specify the pane or window under mouse
as a target, and send-keys -M to pass through a mouse event).
The default builtin bindings for the mouse are:
bind -n MouseDown1Pane select-pane -t=; send-keys -M
bind -n MouseDown1Status select-window -t=
bind -n MouseDrag1Pane copy-mode -M
bind -n MouseDrag1Border resize-pane -M
To get the effect of turning mode-mouse off, do:
unbind -n MouseDrag1Pane
unbind -temacs-copy MouseDrag1Pane
The old mouse options are now gone, set-option -q may be used to
suppress warnings if mixing configuration files.
2015-04-19 21:34:21 +00:00
ee123c2489
Support setting the default window and pane background colours (window
...
and active pane via window-style and window-active-style options, an
individual pane by a new select-pane -P flag). From J Raynor.
2015-04-19 21:05:27 +00:00
0cd55eb1e7
Add a -x flag to copy-selection, append-selection and start-named-buffer
...
to prevent it exiting copy mode after copying. From J Raynor with a few
tweaks by me.
2015-04-10 16:00:08 +00:00
009a5e4213
in the case -> in this case.
2015-04-10 07:23:14 +00:00
3aa72b42b2
Add a helper function to convert time, and add session_activity formats
...
(the latter from Takatoshi Matsumoto).
2015-03-31 17:58:36 +00:00
cd9ccbc1e9
set-titles-string now uses formats, not the status bits (so no #() for
...
now). Reported by landry.
2015-03-11 08:17:37 +00:00
83a8e1fd20
Move pane border options to window options rather than session, from Marc Finet.
2015-02-06 15:09:34 +00:00
be0ad01b7c
Add missing default bindings, from Theo Buehler.
2015-01-06 09:12:02 +00:00
7a0c94b28a
Add pane_dead_status for exit status of dead panes.
2014-12-09 19:23:35 +00:00
54ca7b230d
Add -F to if-shell to allow it to be used to check for format or option
...
values rather than executing a command.
2014-12-02 23:39:02 +00:00
575fd1e322
Permit option values to be used in formats.
2014-12-02 23:19:45 +00:00
d37f266524
Add -b to splitw like joinw, from Felix Rosencrantz.
2014-11-12 22:57:06 +00:00
3c12b477d3
V should be vi not emacs, also sort. From Theo Buehler.
2014-11-07 12:28:28 +00:00
e4bf1e5128
Add V for select line with vi(1) keys. From Juho Pohjala.
2014-11-06 09:17:25 +00:00
d24c9d7d3e
Do not put a space between status-left/status-right and the window list,
...
instead move the space into the defaults for the options (so status-left
now defaults to "[#S] ". From Balazs Kezes.
2014-11-05 23:15:11 +00:00
428b51e031
Add pane_input_off format, from Anish R Athalye.
2014-10-25 08:47:04 +00:00
f0b69c7711
Fix description of Ss and Se.
2014-10-18 20:28:19 +00:00
6610e89689
Top function key is F12 now.
2014-10-02 14:21:06 +00:00
304f86cdbb
Support ! for last pane.
2014-09-25 12:45:35 +00:00
9bda7e881a
Add window_last_flag and window_zoomed_flag. From John Morrissey.
2014-09-08 14:29:05 +00:00
8a473b5757
Fix typo (paneas -> panes).
2014-09-01 22:00:42 +00:00
f518a077b1
Add flags to selectp to enable and disable input to a pane, from Anish
...
Athalye.
2014-08-11 22:14:30 +00:00
c8efffb4db
Make -S- and -E- mean the start and end to capture-pane to avoid having
...
to faff around with huge numbers to get everything.
2014-06-20 10:46:59 +00:00
7160b8c2d5
Add some formats for pane bounds.
2014-05-27 12:49:36 +00:00
191f695bad
Change key-table to mode-table to allow for some future work. From Keith
...
Amling.
2014-05-14 06:45:35 +00:00
b3e8d440ed
If multiple arguments are given to new-session, new-window,
...
split-window, respawn-window or respawn-pane, pass them directly to
execvp() to help avoid quoting problems. One argument still goes to "sh
-c" like before. Requested by many over the years. Patch from J Raynor.
2014-05-13 08:08:32 +00:00
b1a06ef22e
Add a copy mode key binding to copy to a named buffer. From J Raynor.
2014-05-13 07:54:20 +00:00
3dbacbb62b
Add support for named buffers. If you don't name a buffer, things work
...
much as before - buffers are automatically named "buffer0000",
"buffer0001" and so on and ordered as a stack. Buffers can be named
explicitly when creating ("loadb -b foo" etc) or renamed ("setb -b
buffer0000 -n foo"). If buffers are named explicitly, they are not
deleted when buffer-limit is reached. Diff from J Raynor.
2014-05-13 07:34:35 +00:00
64613b9d41
#nnT went away a while ago, remove a leftover from the manpage.
2014-04-17 15:48:02 +00:00
2740490e27
Remove the "info" message mechanism, this was only used for about five
...
mostly useless and annoying messages. Change those commands to silence
on success like all the others. Still accept the -q command line flag
and "quiet" server option for now.
2014-04-17 07:55:43 +00:00
877bdb46ed
Extend the -q flag to set-option to suppress errors about unknown
...
options - this will allow options to be removed more easily.
2014-04-17 07:51:38 +00:00
992ef70fb6
Remove the monitor-content option and associated bits and bobs. It's
...
never worked very well. If there is a big demand for it to return, will
consider better ways to do it.
2014-04-17 07:36:45 +00:00
14a96df9ee
Remove the choose-list command to prepare for some later choose-* work.
2014-04-16 21:02:41 +00:00
252a7373d6
Support UTF-8 with choose-buffer, from Kosuke ASAMI. Also make
...
buffer_sample bigger to let it trim at window right edge.
2014-04-02 18:12:18 +00:00
b52b40b2bc
pane_start_path has gone away.
2014-04-02 07:55:09 +00:00
dca7d1c0fd
Make message-limit a server option.
2014-03-31 21:41:35 +00:00
0e4d1d8493
Add setb -a to append and a copy mode append command, from J Raynor with
...
minor changes.
2014-03-31 21:39:31 +00:00
b11de5adc7
Make session_attached a count and add session_many_attached flag.
2014-03-31 21:37:55 +00:00
f1828921df
Change terminal-overrides to a server option (now that we have them), it
...
doesn't make much sense as a session option.
2014-02-23 00:53:06 +00:00
81db6bab91
Leftovers from removing 88 colour support, from Theo Buehler.
2014-02-16 12:45:17 +00:00
973de5a704
fix some minor formatting glitches;
2014-02-02 08:48:48 +00:00
945339b443
Allow replacing each of the many sets of separate foo-{fg,bg,attr}
...
options with a single foo-style option. For example:
set -g status-fg yellow
set -g status-bg red
set -g status-attr blink
Becomes:
set -g status-style fg=yellow,bg=red,blink
The -a flag to set can be used to add to rather than replace a style. So:
set -g status-bg red
Becomes:
set -ag status-style bg=red
Currently this is fully backwards compatible (all *-{fg,bg,attr} options
remain) but the plan is to deprecate them over time.
From Tiago Cunha.
2014-01-28 23:07:09 +00:00
d23561f381
Merge server-info into show-messages and remove some not useful output.
2014-01-22 14:43:42 +00:00
1286c56188
Replace ## by # in format.
2013-11-24 11:29:09 +00:00
7fa55b0419
Key to swap to other end of selection (bound to o with vi keys), from J
...
Raynor.
2013-10-23 11:31:03 +00:00
17ec688ced
Bracket in the wrong place in description of c0-change-trigger.
2013-10-10 23:31:28 +00:00
d0566a474a
Remove the KERN_PROC_CWD the proc_current_path format (which is the only
...
thing that uses it now).
2013-10-10 12:39:24 +00:00
282c5f9644
Alter how tmux handles the working directory to internally use file
...
descriptors rather than strings.
- Each session still has a current working directory.
- New sessions still get their working directory from the client that
created them or its attached session if any.
- New windows are created by default in the session working directory.
- The -c flag to new, neww, splitw allows the working directory to be
overridden.
- The -c flag to attach let's the session working directory be changed.
- The default-path option has been removed.
To get the equivalent to default-path '.', do:
bind c neww -c $PWD
To get the equivalent of default-path '~', do:
bind c neww -c ~
This also changes the client identify protocol to be a set of messages rather
than one as well as some other changes that should make it easier to make
backwards-compatible protocol changes in future.
2013-10-10 12:26:34 +00:00
b822d24b15
Support -c for new-session, based on code from J Raynor.
2013-10-10 12:07:36 +00:00
40811eb8d4
Add length limit operator for formats.
2013-10-10 11:50:20 +00:00
d75dd2ab1c
Add formats for window flags.
2013-10-10 11:47:52 +00:00
7c71c3e27d
Change the default for the default-path option to ~. This is a quick
...
change to turn off the KERN_PROC_CWD code which is unpredictable. Later
it will go away and there may be other changes to how this works.
2013-10-05 13:56:48 +00:00
304ea079d2
use .Mt for email addresses; from Jan Stary <hans at stare dot cz>; ok jmc@
2013-07-16 00:07:52 +00:00
f5b041e394
Add pane_synchronized format, from Romain Francoise.
2013-07-05 15:27:14 +00:00
3977dba761
Focus events can cause trouble if left on and they can't be turned off
...
during idle periods (like the other states are) because we'd miss
events. So add a server option to control them. Defaults to off.
2013-06-23 13:10:46 +00:00
ddb52a2b15
escape "Ss", becuase groff thinks it has found a macro;
2013-06-02 14:40:17 +00:00
13441e8cb8
The actual terminfo entries we ended up with for cursor changes are Cs,
...
Ce, Ss and Se (not Cc, Ce, Cs, Csr). So use and document these instead
of the ones we were using earlier.
2013-06-02 07:52:15 +00:00
c231381aa3
Demote the old single-character replacement variables (#S and friends)
...
to aliases of formats. From Tiago Cunha.
2013-05-31 19:56:05 +00:00
c30d60f7ae
Add host_short format, from Tiago Cunha.
2013-05-31 19:46:42 +00:00
2555ac58cc
.Op Fl b not .Fl b for run-shell synopsis, from Ben Boeckel.
2013-04-24 10:15:47 +00:00
20f0d917be
Missed -o from set-window-option, from Ben Boeckel.
2013-04-10 12:07:18 +00:00
7f63658709
Add TMUX_TMPDIR variable to put the socket directory outside
...
TMPDIR. From Ben Boeckel.
2013-03-27 11:24:18 +00:00
e44bd9f750
Revert the command-prefix change which breaks sequences of commands.
2013-03-25 15:59:57 +00:00
4119c476aa
b comes before t.
2013-03-25 11:46:28 +00:00
6fee3e9e4b
Rename session idx to session id throughout and add $ prefix to targets
...
to use it, extended from a diff from George Nachman.
2013-03-25 10:11:45 +00:00
748acdc77c
Add wait-for -L and -U for lock and unlock, from Thiago Padilha.
2013-03-25 10:09:35 +00:00
14fad6a5cc
Add -A flag to new-session to make it behave like attach-session if the
...
session exists. If -A is used, -D behaves like -d to attach-session.
2013-03-24 09:58:40 +00:00
a05b8c4143
Add a -o option to set-option to prevent setting an option already set,
...
from Thiago Padilha.
2013-03-24 09:55:02 +00:00
66edb3392b
Expand format variables in the run-shell and if-shell shell commands,
...
from Thiago Padilha.
2013-03-24 09:33:35 +00:00
ac1fe83596
Couple of fixes pointed out by jmc.
2013-03-22 18:45:36 +00:00
702ab8bab0
Add a load of miscellaneous pane formats, from George Nachman.
2013-03-22 16:03:35 +00:00
8478895eeb
Add -e flag to capture-pane to include embedded ANSI SGR escape
...
sequences, from George Nachman.
2013-03-22 15:51:54 +00:00
f0efa576e0
Add resize-pane -x and -y for absolute pane size (much requested).
2013-03-22 10:37:39 +00:00
ad760b3bf7
Add client_session and client_last_session formats.
2013-03-22 10:32:36 +00:00
78543cce30
Support capture-pane -p to send to stdout.
2013-03-21 18:43:34 +00:00
55bf2ecc68
tweak previous; ok nicm
2013-03-21 17:42:36 +00:00
4920306486
Clarify choose-tree entry in man page.
2013-03-21 16:23:46 +00:00
180faf73af
Allow choose commands to be used outside tmux, so long as at least one
...
client is attached.
2013-03-21 16:09:59 +00:00
e33ba57c13
Remove the layout undo/redo code which never really worked.
2013-01-17 00:11:22 +00:00
bc2e4a36df
If timing between keys is less than (by default) 1 millisecond, assume
...
the text is being pasted. assume-paste-time option changes the value (0
disables). Based on a diff from Marcin Kulik.
2013-01-15 22:55:29 +00:00
854e8ae04d
Add ^ and $ special command targets to select lowest and highest
...
numbered windows, from Raghavendra D Prabhu.
2012-12-24 12:38:57 +00:00
4aa4e9fb26
Allow cmd-run-shell to accept -t to specify the pane to display the
...
output, requested by Alexander Tsepkov.
2012-11-27 15:09:35 +00:00
93224260ae
Add window-status-last-* options, from Boris Faure.
2012-11-27 13:52:23 +00:00
9a7e5bd1d3
Clarify some points about config files, notably that they are only read
...
at server start. From Thomas Adam.
2012-11-19 10:50:24 +00:00
589b4b8c6a
Fix typo bell->bells from Thomas Adam.
2012-10-25 11:11:58 +00:00
ea289bc457
Remove some out of date text from man page, from Thomas Adam.
2012-10-02 08:02:21 +00:00
7263fa36eb
add cmd-choose-list to allow arbitrary options to be selected. From
...
Thomas Adam.
2012-09-03 09:57:57 +00:00
cf2e65c0e2
Another missing format from sam at sltosis.org.
2012-08-11 07:10:01 +00:00
ff4097e02c
Add some missing formats from Samuel Le Thiec.
2012-08-11 05:55:12 +00:00
89a96b05fa
Document pane_index variable, from sam at sltosis dot org.
2012-07-15 06:51:57 +00:00
b0f4f94b5b
remove extraneous line;
2012-07-08 17:24:29 +00:00
f20c6fe009
Add choose-tree command to show windows and sessions in the same
...
list. Change choose-window and -session to use the same code. From
Thomas Adam.
2012-07-08 16:04:38 +00:00
2113115cdd
Add -a for kill-session, from Thomas Adam.
2012-06-18 09:16:15 +00:00
038e8b770d
Add -a flag for detach-client, from Thomas Adam.
2012-06-18 09:15:22 +00:00
04ac61ecd7
Simplify references to alerts in the man page, from Thomas Adam.
2012-06-18 09:13:12 +00:00
ebf94bc9cb
Switch all of the various choose- and list- commands over to the format
...
infrastructure, from Thomas Adam.
2012-05-22 11:35:37 +00:00
ac7e2f13e9
Ignore line continuation when escaped as \\, from Simon Nicolussi.
2012-05-17 21:21:31 +00:00
cc979bda0f
default-path has the same possibilities as new-window -c now.
2012-05-02 19:29:13 +00:00
a6c22d650b
Add a flag to move-window to renumber the windows in a session (closing
...
any gaps) and add an option to do this automatically each time a window
is killed. From Thomas Adam.
2012-04-29 17:20:01 +00:00
e02d1bce98
Add window-status-separator option, from Thomas Adam.
2012-04-23 22:23:14 +00:00
ed58b2d353
Add -a flag to kill-window, from Thomas Adam.
2012-04-23 22:10:45 +00:00
85f5485cb5
Add a layout history which can be stepped through with select-layout -u
...
and -U commands (bound to 'u' and 'U' by default).
2012-04-01 13:18:38 +00:00
b831f86354
Add pane_current_path format, suggested by Mikolaj Kucharski.
2012-04-01 10:42:39 +00:00
c0cfbe12e4
Accept an argument to show-environment to show one variable, based on a
...
diff from Kazuhiko Sakaguchi.
2012-03-22 11:11:57 +00:00
90bf560fe4
Add -C -N -T flags to find-window to find in content, name, title. From
...
Jonathan Daugherty.
2012-03-20 17:09:48 +00:00
01f2b5d64b
50 is a too low trigger default on larger terminals, bump to 250.
2012-03-20 11:23:12 +00:00
f59971276a
Add a simple form of output rate limiting by counting the number of
...
certain C0 sequences (linefeeds, backspaces, carriage returns) and if it
exceeds a threshold (current default 50/millisecond), start to redraw
the pane every 100 milliseconds instead of making each change as it
comes. Two configuration options - c0-change-trigger and
c0-change-interval.
This makes tmux much more responsive under very fast output (for example
yes(1) or accidentally cat'ing a large file) but may not be perfect on
all terminals and connections - feedback very welcome, particularly
where this change has a negative rather than positive effect (making it
off by default is a possibility).
After much experimentation based originally on a request Robin Lee
Powell (which ended with a completely different solution), this idea
from discussion with Ailin Nemui.
2012-03-20 11:01:00 +00:00
95f48a219a
Add a wrap-search option to turn off wrapping of searches in copy
...
mode. From Jacobo de Vera.
2012-03-17 21:40:53 +00:00
f152379e5a
Add -q option to set-option to turn off info message, from marcel partap.
2012-03-17 21:33:33 +00:00
4e05a2c0ae
Add -P/-F flags to break-pane too, from George Nachman.
2012-03-12 13:31:09 +00:00
03dca66ae2
Add -F format to new-window and split-window to use with the -P flag,
...
from George Nachman.
2012-03-04 20:50:53 +00:00
f4fdddc930
Support "bracketed paste" mode. This adds a -p flag to paste-buffer - if
...
this is used and the application has requested bracketed pastes, then
tmux surrounds the pasted text by \033[200~ and \033[201~. Applications
like vim can (apparently) use this to avoid, for example, indenting the
text. From Ailin Nemui.
2012-03-03 09:43:22 +00:00
07ac16807f
Add move-pane command (like join-pane but allows the same window). Also
...
-b flag to join-pane and move-pane to place the pane to the left or
above. From George Nachman.
2012-03-03 08:31:18 +00:00
4e7de210e4
Allow a single option to be specified to show-options to show just that
...
option.
2012-02-25 12:57:42 +00:00
aaf0bfccf4
Use format for display-message, based on a diff from George Nachman.
2012-02-23 22:40:58 +00:00
fe7cf0ba90
Document option values, particularly that omitting on|off for a flag is
...
a toggle.
2012-02-02 22:33:05 +00:00
efb639e1d2
Add -l flag to send-keys to send input literally (without translating
...
key names). From Frank Terbeck.
2012-02-02 00:15:28 +00:00
908a22e41c
Provide defined ways to set the various default-path possibilities: ~
...
for home directory, . for server start directory, - for session start
directory and empty for the pane's working directory (the default). All
can also be used as part of a relative path (eg -/foo). Also provide -c
flags to neww and splitw to override default-path setting.
Based on a diff from sthen. ok sthen
2012-01-31 15:52:21 +00:00
677ed3e5f0
id -> ID; ok nicm
2012-01-30 20:48:28 +00:00
0e59bc75fd
Give each window a unique id, like panes but prefixed with @. Based on
...
work from George Nachman.
2012-01-30 09:39:34 +00:00
230d0fbc9e
Add an option to move the status line to the top of the screen,
...
requested by many.
2012-01-29 09:37:02 +00:00
e870a3f3ec
it's -> its.
2012-01-21 20:40:28 +00:00
535286c05a
Drop the ability to have a list of keys in the prefix in favour of two
...
separate options, prefix and prefix2. This simplifies the code and gets
rid the data options type which was only used for this one option.
Also add a -2 flag to send-prefix to send the secondary prefix key,
fixing a cause of minor irritation.
People who want three prefix keys are out of luck :-).
2012-01-21 08:40:09 +00:00
7f24020cbe
Add strings to allow the aixterm bright colours to be used when
...
configuring colours, requested by Elliott Cable a few months ago.
2012-01-21 08:23:12 +00:00
66f04514cf
Add a -R flag to send-keys to reset the terminal. Written ages ago and
...
Suggested by someone, I forget who.
2012-01-21 08:10:21 +00:00
8cf19ab770
Add some trivial additional status line attributes from jwcxz at users
...
dot sourceforge dot net.
2012-01-20 19:51:28 +00:00
199d148740
Remove trailing spaces.
2012-01-20 19:16:16 +00:00
dcad13155b
Add an option to disable the window rename escape sequence, from Romain
...
Francoise.
2012-01-20 19:15:40 +00:00
eeaf92ad06
Add a man page section on window names and pane titles, from Felix
...
Rosencrantz.
2011-12-31 03:40:15 +00:00
16f9667620
Show how to set default-path to revert to tmux's old behaviour of opening
...
new windows in the current working directory at the time tmux was started,
it's not obvious. naddy@ agrees this is a useful inclusion.
2011-12-30 14:59:13 +00:00
fdd1d0b72e
Allow $HOME as default-path in tmux.conf so the same config file can be used
...
on different machines regardless of where the user's home directory is.
ok nicm
2011-12-27 14:07:20 +00:00
da145e7c20
formatting errors, found using freebsd's "igor";
2011-12-24 08:46:48 +00:00
f308ba93aa
Change the way the working directory for new processes is discovered. If
...
default-path isn't empty, it is used. Otherwise:
1) If tmux neww is run from the command line, the working directory of the
client is used.
2) Otherwise sysctl KERN_PROC_CWD is used to retrieve the current
working directory of the process in the active pane.
3) If that fails, the directory where the session was created is used.
Support code by Romain Francois, OpenBSD specific bits by me.
Note this requires a recent userland and kernel with KERN_PROC_CWD.
2011-12-09 16:28:18 +00:00
e04d13f6a6
Support "jump to" like vi in copy mode using t and T keys. Also add x
...
and X for delete in edit mode.
From Ben Boeckel, thanks.
2011-12-04 16:18:01 +00:00
fd25d35868
Move word-separators to be a session rather than window option, from Ben
...
Boeckel.
2011-11-15 23:24:04 +00:00
6c1c304fc3
Missing bits for new keys and buffer indexes, from Tiago Cunha
2011-11-05 09:13:00 +00:00
e5bf63cb59
Option to change status line (message) background when using vi keys and
...
in command mode. From Ben Boeckel.
2011-11-05 09:06:31 +00:00
e5d6df8979
minor formatting fix;
2011-10-27 23:33:35 +00:00
5ed3daf28b
Didn't really think the else behaviour through - requiring argv to
...
contain "else" is silly so just omit that, also some manpage
tweaks. From Tiago Cunha.
2011-10-27 22:40:15 +00:00
16d75a6bf2
Add client formats, from Ben Boeckel.
2011-10-23 01:12:46 +00:00
49ef0b4af3
Add a few more formats for panes (tty, pid, start cmd/cwd).
2011-10-02 06:55:48 +00:00
b1ed2d5bd9
Add -S option to refresh-client to redraw status line, from Marco Beck.
2011-09-28 20:11:21 +00:00
f14da260c8
Tweaks to the format parts, from Tiago Cunha.
2011-09-23 18:33:43 +00:00
2888843a18
tweak previous;
2011-08-26 13:07:49 +00:00
4a5dff3f11
Add initial framework for more powerful formatting of command output and
...
use it for list-{panes,windows,sessions}. This allows more descriptive
replacements (such as #{session_name}) and conditionals.
Later this will be used for status_replace and list-keys and other
places.
2011-08-26 10:53:16 +00:00
0588168a64
Support \ for line continuation in the configuration file, from Julius
...
Plenz.
2011-08-24 10:46:01 +00:00
f01b7191a3
Add pane-base-index option, from Ben Barbour.
2011-08-24 10:29:57 +00:00
88e9079870
Add a -r flag to switch-client to toggle the client read-only flag. From
...
Johan Commelin.
2011-08-16 10:00:52 +00:00
cf90f2a29c
fix error in previous;
2011-07-30 18:27:57 +00:00
cc5bcbfb59
Extend the mode-mouse option to add a third choice which means the mouse
...
does not enter copy mode. Patch from SF bug 3374493.
In future the mode-mouse option is likely to die and be broken into
several smaller options.
2011-07-30 18:01:26 +00:00
0252796a57
Sort options alphabetically, from Tiago Cunha.
2011-07-25 09:57:28 +00:00
2de9b1e005
Make confirm-before prompt customizable with -p option like
...
command-prompt. Also move responsibility for calling status_replace into
status_prompt_{set,update} and add #W and #P to the default kill-window
and kill-pane prompts. By Tiago Cunha.
2011-07-08 06:37:57 +00:00
f12158bc25
Add an option to trigger the terminal bell when there is an alert, from
...
Marco Beck.
2011-07-03 19:07:54 +00:00
94f86edfee
Include the existing window and session name in the prompt when renaming
...
and add a new key binding ($) for rename session. From Tiago Cunha.
2011-07-03 18:18:15 +00:00
ad60a2c952
Allow the initial context on prompts to be set with the new -I option to
...
command-prompt. From Tiago Cunha.
2011-07-02 21:05:44 +00:00
65177b82be
Add a respawn-pane command, from Marcel Partap.
2011-06-05 11:19:03 +00:00
f537870909
Fix a typo, spotted by Michal Mazurek..
2011-05-30 21:02:28 +00:00
240cae4c92
tweak the TERMINFO section; ok nicm
2011-05-21 10:04:17 +00:00
1af2021de6
Pass prompts through status_replace so that they can be more helpful
...
(such as showing the previous session name when renaming). From Tiago
Cunha.
2011-05-20 19:29:13 +00:00
3ea5e06bfb
Support DECSCUSR sequence to set the cursor style with two new
...
terminfo(5) extensions, Cs and Csr. Written by Ailin Nemui.
2011-05-20 19:17:39 +00:00
944b5e6fa0
Support xterm(1) cursor colour change sequences through terminfo(5) Cc
...
(set) and Cr (reset) extensions. Originally by Sean Estabrooks, tweaked
by me and Ailin Nemui.
2011-05-20 19:03:58 +00:00
96e7f33da3
Support setting the xterm clipboard when copying from copy mode using
...
the xterm escape sequence for the purpose (if xterm is configured to
allow it).
Written by and much discussed Ailin Nemui, guidance on
xterm/termcap/terminfo from Thomas Dickey.
2011-05-18 20:24:29 +00:00
58908fd8c5
Add three new copy-mode commands - select-line, copy-line,
...
copy-end-of-line. From Dave Disser and Randy Stauner a while back.
2011-05-18 18:06:36 +00:00
f3741f0653
Add a new option, mouse-resize-pane. When on, panes may be resized by
...
dragging their borders. From hsim at gmx.li.
2011-05-08 20:34:12 +00:00
295ace6820
Use the tsl and fsl terminfo(5) capabilities to update terminal title
...
and automatically fill them in on terminals with the XT capability
(which means their title setting is xterm-compatible). From hsim at
gmx.li.
2011-05-08 19:53:06 +00:00
eb288aae32
Provide #h for short hostname (no domain) from Michal Mazurek.
2011-04-24 21:32:07 +00:00
8738141913
When mode-mouse is on (it is off by default), automatically enter copy
...
mode when the mouse is dragged or the mouse wheel is used. Also exit
copy mode when the mouse wheel is scrolled off the bottom. Discussed
with and written by hsim at gmx dot li.
2011-04-19 21:31:33 +00:00
0bb2119781
Add an option (mouse-select-window) which allows the mouse to be used by
...
clicking on the status line, written by hsim at gmx dot li.
2011-04-18 19:49:05 +00:00
4e75e82cc3
new sentence, new line;
2011-04-17 20:39:44 +00:00
f4432030ee
Add -t to list-clients, based on a diff from Zac Sprackett.
2011-04-17 19:28:09 +00:00
3dc7b805d3
-s comes before -t and also add -s to command syntax. Prompted by jmc.
2011-04-11 16:44:36 +00:00
735f87bc66
Add -s option to detach all clients attached to a session, from Zac
...
Sprackett.
2011-04-11 06:44:39 +00:00
5d519ba526
Add a flag to cmd_find_session so that attach-session can prefer
...
unattached sessions when choosing the most recently used (if -t is not
given). Suggested by claudio@.
2011-04-05 19:37:01 +00:00
f8a218882a
"or" should be on a line on its own here so it is not emphasised as
...
well.
2011-04-01 16:59:11 +00:00
d88c20e718
Change -t on display-message to be target-pane for the #[A-Z]
...
replacements and add -c as target-client.
2011-03-29 19:30:16 +00:00
f19a4bf9d1
Add -a and -s options to lsp to list all panes in the server or session
...
respectively. Likewise add -s to lsw. From Ben Boeckel.
2011-03-28 23:13:00 +00:00
82e0165c49
Allow a start and end line to be specified for capture-pane which may be
...
negative to capture part of the history. Prompted by request from Victor
J Orlikowski.
2011-03-28 20:17:39 +00:00
808502ac3d
Give each pane created in a tmux server a unique id (starting from 0),
...
put it in the TMUX_PANE environment variable and accept it as a
target. Suggested by and with testing and tweaks from Ben Boeckel.
2011-03-27 20:27:26 +00:00
7954126dcd
Add a -P option to detach to HUP the client's parent process (usually
...
causing it to exit as well).
2011-03-03 08:51:47 +00:00
4f34e25dd8
Support -x and -y for new-session to specify the initial size of the
...
window if created detached with -d.
2011-01-14 23:49:23 +00:00
fa4a75cdab
Clarify alternate-screen description a little.
2011-01-13 09:50:11 +00:00
b3438c86bf
Use TMPDIR if set, from Han Boetes.
2011-01-12 22:23:58 +00:00
17f1cd5be8
Remove a bit of text that makes exit-unattached description unclear.
2011-01-09 18:46:46 +00:00
c3041eb9f0
Add missing arguments to some options.
2011-01-09 18:42:19 +00:00
703160b5d6
Accept colours of the hex form #ffffff and translate to the nearest from
...
the xterm(1) 256-colour set.
2011-01-08 00:48:54 +00:00
96c37fa80a
Now that parsing is common, merge some of the small, related commands
...
together to use the same code.
Also add some arguments (such as -n and -p) to some commands to match
existing commands.
2011-01-04 02:03:41 +00:00
ac3b78a841
Support for UTF-8 mouse input (\033[1005h). This was added in xterm 262
...
and supports larger terminals than the older way.
If the new mouse-utf8 option is on, UTF-8 mouse input is enabled for all
UTF-8 terminals. The option defaults to on if LANG etc are set in the
same manner as the utf8 option.
With help and based on code from hsim at gmx.li.
2011-01-03 23:35:21 +00:00
a4515ce138
suspend-client has used -t for the client target (like everything else)
...
for ages, fix the usage string and man page and trim some leftover code.
2011-01-01 11:24:45 +00:00
b6950ed8aa
Add a -P option to new-window and split-window to print the new window
...
or pane index in target form (useful to pass it into other commands).
2011-01-01 01:33:07 +00:00
1a1efd5bc9
fix trailing whitespace;
2010-12-31 00:41:11 +00:00
2b3c2fd852
Fix BUFFERS section now they are global.
2010-12-30 23:17:41 +00:00
cc42614fa9
Change from a per-session stack of buffers to one global stack which is
...
much more convenient and also simplifies lot of code. This renders
copy-buffer useless and makes buffer-limit now a server option.
By Tiago Cunha.
2010-12-30 23:16:18 +00:00
efa8c93664
tweak previous;
2010-12-27 19:57:31 +00:00
3e0bc052e1
Add a missing .Pp and sort options alphabetically, from Tiago Cunha.
2010-12-27 18:22:25 +00:00
c198664d15
Add other-pane-height and other-pane-width options, allowing the width
...
or height of the smaller panes in the main-horizontal and main-vertical
layouts to be set. Mostly from David Goodlad.
2010-12-19 18:35:08 +00:00
51487ed22f
Track the last session for a client and add a flag to switch-client and
...
a key binding (L) to move a client back to its last session.
2010-12-11 18:39:25 +00:00
6be32c89c5
Rephrase a confusing sentence.
2010-12-10 21:01:38 +00:00
e26a351865
Add an option to alert (monitor) for silence (lack of activity) in a
...
window. From Thomas Adam.
2010-12-06 22:51:02 +00:00
ebd0eb4fb4
If VISUAL or EDITOR contains "vi", configure mode-keys and status-keys
...
to vi.
Based on a diff from martynas@, previously requested by a couple of
other people.
2010-11-29 19:45:58 +00:00
7e542d119b
Update man page for update-environment.
2010-11-14 09:04:22 +00:00
17b56562c4
Flag to flush all key bindings from Rob Paisley.
2010-11-11 20:54:06 +00:00
023137a891
Typo, from Rob Paisley.
2010-11-01 20:59:45 +00:00
5de84eca3d
Add a last-pane command (bound to ; by default). Requested ages ago by
...
somebody whose name I have forgotten.
2010-10-23 13:04:34 +00:00
1580afdfdf
Put "or" on new line from command with .Ic.
2010-10-14 00:30:03 +00:00
9a7cde0c9b
Two new options:
...
- server option "exit-unattached" makes the server exit when no clients
are attached, even if sessions are present;
- session option "destroy-unattached" destroys a session once no clients
are attached to it.
These are useful for preventing tmux remaining in the background where
it is undesirable and when using tmux as a login shell to keep a limit
on new sessions.
2010-09-26 20:43:30 +00:00
2772557d15
detach-on-destroy is a session option, not server.
2010-09-25 20:35:52 +00:00
a22a6deda5
Add -n and -p flags to switch-client to move to the next and previous
...
session (yes, it doesn't match window/pane, but so what, nor does
switch-client).
Based on a diff long ago from "edsouza".
2010-09-08 22:02:28 +00:00
a471b5de9c
some escapes i missed;
2010-07-15 21:54:20 +00:00
552c9cd83f
Custom layouts. list-windows command displays the layout as a string (such as
...
"bb62,159x48,0,0{79x48,0,0,79x48,80,0}") and it can be applied to another
window (with the same number of panes or fewer) using select-layout.
2010-06-29 03:30:13 +00:00
07a71fd432
Store the current working directory in the session, change the default-path
...
option to default to empty and make that mean that the stored session CWD is
used.
2010-06-27 02:56:59 +00:00
26524c99f6
New option, detach-on-destroy, to set what happens to a client when the session
...
it is attached to is destroyed. If on (the default), it is detached; if off, it
is switched to the most recently active session.
2010-06-27 00:22:22 +00:00
ef7293379f
Add a choose-buffer command for easier use of the paste buffer stack.
2010-06-21 21:44:09 +00:00
386849edc1
Extend the -t:+ and -t:- window targets for next and previous window to
...
accept an offset such as -t:+2. From Tiago Cunha.
2010-06-21 01:46:36 +00:00
1484eb8a51
Add a missing command and some missing Ic, from Tiago Cunha.
2010-06-14 23:04:44 +00:00
4e3bed2035
Couple of missing command aliases/flags, from Tiago Cunha.
2010-06-05 16:54:24 +00:00
ceed5cc9a9
Support the status_replace # replacement sequences in the pipe-pane
...
command, thanks to Andrea Barisani.
2010-06-05 16:34:30 +00:00
43fa9a9ba6
When the mode-mouse option is on, support dragging to make a selection
...
in copy mode.
Also support the scroll wheel, although xterm strangely does not ignore
it in application mouse mode, causing redraw artifacts when scrolling up
(other terminals appear to be better behaved).
2010-05-31 19:51:29 +00:00
e1e120de1c
Better to say "command key bindings" since we've just called them
...
command keys.
2010-05-30 19:19:42 +00:00
7b7397241f
There is no real reason not to list all the key bindings here rather
...
than just a selection.
2010-05-30 19:09:50 +00:00
0ed727a012
Enhance paste-buffer to allow lines to be separated by any string, from
...
Andrea Barisani.
2010-05-19 22:28:14 +00:00
nicm