Commit Graph

1090 Commits

Author SHA1 Message Date
Tiago Cunha
0986001908 Sync OpenBSD patchset 533:
Zap unused functions, prompted by deraadt.
2009-11-13 16:58:24 +00:00
Tiago Cunha
1b4a76d58f Sync OpenBSD patchset 527:
Only need to chmod +x or -x the socket when a client is created, lost or
attached, rather than every event loop.
2009-11-13 16:51:49 +00:00
Nicholas Marriott
5d397462e4 Zap unused functions, prompted by deraadt. 2009-11-13 07:00:54 +00:00
Nicholas Marriott
2756437f4b Only need to chmod +x or -x the socket when a client is created, lost or
attached, rather than every event loop.
2009-11-11 08:00:42 +00:00
Tiago Cunha
74e742113d Sync OpenBSD patchset 523:
Whoops, this is needed for last commit as well.
2009-11-10 23:31:21 +00:00
Nicholas Marriott
b92fcf23fd Whoops, this is needed for last commit as well. 2009-11-10 17:41:35 +00:00
Tiago Cunha
181e1cc711 Sync OpenBSD patchset 513:
Switch the tty key tree over to an (unbalanced) ternary tree which allows
partial matches to be done (they wait for further data or a timer to expire,
like a naked escape).

Mouse and xterm-style keys still expect to be atomic.
2009-11-08 23:32:39 +00:00
Tiago Cunha
7d288e7fd8 Sync OpenBSD patchset 511:
Key flags are only used for initialisation so they are not needed in the main
tty_key struct.
2009-11-08 23:29:34 +00:00
Tiago Cunha
5ac6ea61bd Sync OpenBSD patchset 509:
Now all timers are events, there is no longer any need to wake up every 50 ms -
only wake up when an event happens.
2009-11-08 23:27:58 +00:00
Tiago Cunha
66957412d5 Sync OpenBSD patchset 508:
Switch tty key input over to happen on a read event. This is a bit more
complicated because of escape input, but in that case instead of processing a
key immediately, schedule a timer and reprocess the bufer when it expires.

This currently assumes that keys will be atomic (ie that if eg F1 is pressed
the entire sequence is present in the buffer). This is usually but not always
true, a change in the tree format so it can differentiate potential (partial)
key sequences will happens soon and will allow this to be fixed.
2009-11-08 23:26:56 +00:00
Tiago Cunha
ac6092c27f Sync OpenBSD patchset 507:
Convert the key repeat timer to an event.
2009-11-08 23:24:59 +00:00
Tiago Cunha
ab38d91913 Sync OpenBSD patchset 506:
Change window name change to use a timer event rather than a gettimeofday()
check every loop.
2009-11-08 23:22:24 +00:00
Tiago Cunha
915031b049 Sync OpenBSD patchset 505:
Move status timer check into the global once-per-second timer, this could maybe
be done better but one every second is better than once every 50 ms.
2009-11-08 23:12:35 +00:00
Tiago Cunha
02438c01b7 Sync OpenBSD patchset 504:
Use timeout events for the identify and message timers.
2009-11-08 23:11:23 +00:00
Tiago Cunha
bee17719d8 Sync OpenBSD patchset 503:
Don't reenlist the client imsg event every loop, instead have a small function
to it and call it after the event triggers or after a imsg is added.
2009-11-08 23:09:36 +00:00
Tiago Cunha
142962742c Sync OpenBSD patchset 499:
Bye-bye buffer*.c.
2009-11-08 23:05:36 +00:00
Tiago Cunha
2df0882722 Sync OpenBSD patchset 498:
Convert the window pane (pty master side) fd over to use a bufferevent.

The evbuffer API is very similar to the existing tmux buffer API so this was
remarkably painless. Not many possible ways to do it, I suppose.
2009-11-08 23:02:56 +00:00
Tiago Cunha
cb0bf6a043 Sync OpenBSD patchset 496:
Switch window pane pipe redirect fd over to a bufferevent.
2009-11-08 22:59:53 +00:00
Tiago Cunha
971a7b2fe0 Sync OpenBSD patchset 495:
Switch tty fds over to a bufferevent.
2009-11-08 22:58:38 +00:00
Tiago Cunha
53ef4c2bab Sync OpenBSD patchset 493:
Switch jobs over to use a bufferevent.
2009-11-08 22:56:04 +00:00
Tiago Cunha
dd36982ad5 Sync OpenBSD patchset 491:
Initial changes to move tmux to libevent.

This moves the client-side loops are pretty much fully over to event-based only
(tmux.c and client.c) but server-side (server.c and friends) treats libevent as
a sort of clever poll, waking up after every event to run various things.

Moving the server stuff over to bufferevents and timers and so on will come
later.
2009-11-08 22:40:36 +00:00
Nicholas Marriott
80e0158112 Switch the tty key tree over to an (unbalanced) ternary tree which allows
partial matches to be done (they wait for further data or a timer to expire,
like a naked escape).

Mouse and xterm-style keys still expect to be atomic.
2009-11-05 19:29:41 +00:00
Nicholas Marriott
a790e16fa2 Key flags are only used for initialisation so they are not needed in the main
tty_key struct.
2009-11-05 10:44:36 +00:00
Nicholas Marriott
38e13942ac Now all timers are events, there is no longer any need to wake up every 50 ms -
only wake up when an event happens.
2009-11-05 08:48:15 +00:00
Nicholas Marriott
b58bf49e91 Switch tty key input over to happen on a read event. This is a bit more
complicated because of escape input, but in that case instead of processing a
key immediately, schedule a timer and reprocess the bufer when it expires.

This currently assumes that keys will be atomic (ie that if eg F1 is pressed
the entire sequence is present in the buffer). This is usually but not always
true, a change in the tree format so it can differentiate potential (partial)
key sequences will happens soon and will allow this to be fixed.
2009-11-05 08:45:08 +00:00
Nicholas Marriott
80444436f3 Convert the key repeat timer to an event. 2009-11-05 00:05:00 +00:00
Nicholas Marriott
44d6a2c435 Change window name change to use a timer event rather than a gettimeofday()
check every loop.
2009-11-04 23:54:57 +00:00
Nicholas Marriott
946ed97273 Move status timer check into the global once-per-second timer, this could maybe
be done better but one every second is better than once every 50 ms.
2009-11-04 23:42:51 +00:00
Nicholas Marriott
b1264a7416 Use timeout events for the identify and message timers. 2009-11-04 23:29:42 +00:00
Nicholas Marriott
b3c4956efe Don't reenlist the client imsg event every loop, instead have a small function
to it and call it after the event triggers or after a imsg is added.
2009-11-04 23:12:43 +00:00
Tiago Cunha
5be38f2b3a Sync OpenBSD patchset 485:
Add an activity time for clients, like for sessions, and change session and
client lookup to pick the most recently used rather than the most recently
created - this is much more useful when used interactively and (because the
activity time is set at creation) should have no effect on source-file.

Based on a problem reported by Jan Johansson.
2009-11-04 22:46:25 +00:00
Nicholas Marriott
5bebbd81d7 Bye-bye buffer*.c. 2009-11-04 22:44:53 +00:00
Tiago Cunha
b7fc4f3760 Sync OpenBSD patchset 484:
If it isn't available explicitly, work out the current client in a similar way
to the current session - build a list of the possibilities then pick the
newest.
2009-11-04 22:44:01 +00:00
Nicholas Marriott
a02c7e804c Convert the window pane (pty master side) fd over to use a bufferevent.
The evbuffer API is very similar to the existing tmux buffer API so this was
remarkably painless. Not many possible ways to do it, I suppose.
2009-11-04 22:43:11 +00:00
Tiago Cunha
bbad75fb6c Sync OpenBSD patchset 483:
Change session and client activity and creation time members to have more
meaningful names.

Also, remove the code to try and update the session activity time for the
command client when a command message is received as is pointless because it
des not have a session.
2009-11-04 22:42:31 +00:00
Tiago Cunha
a090b78e8d Sync OpenBSD patchset 482:
tv member of struct paste_buffer is updated but not otherwise used, so remove
it.
2009-11-04 22:39:20 +00:00
Tiago Cunha
f3b4b60aa8 Sync OpenBSD patchset 480:
Double the escape timer (the time after a \033 is received before tmux gives up
waiting to see if it is part of a key sequence and passes it through) to 500
ms, the previous setting was too fast. Suggested by naddy.
2009-11-04 22:37:18 +00:00
Nicholas Marriott
91ad830c88 Switch window pane pipe redirect fd over to a bufferevent. 2009-11-04 22:02:38 +00:00
Nicholas Marriott
7342615c7d Switch tty fds over to a bufferevent. 2009-11-04 21:47:42 +00:00
Nicholas Marriott
4d6091379b Switch jobs over to use a bufferevent. 2009-11-04 21:04:43 +00:00
Nicholas Marriott
abf3a5d50e Initial changes to move tmux to libevent.
This moves the client-side loops are pretty much fully over to event-based only
(tmux.c and client.c) but server-side (server.c and friends) treats libevent as
a sort of clever poll, waking up after every event to run various things.

Moving the server stuff over to bufferevents and timers and so on will come
later.
2009-11-04 20:50:11 +00:00
Nicholas Marriott
0785f2872f Add an activity time for clients, like for sessions, and change session and
client lookup to pick the most recently used rather than the most recently
created - this is much more useful when used interactively and (because the
activity time is set at creation) should have no effect on source-file.

Based on a problem reported by Jan Johansson.
2009-11-03 22:40:40 +00:00
Nicholas Marriott
5761ab6b55 If it isn't available explicitly, work out the current client in a similar way
to the current session - build a list of the possibilities then pick the
newest.
2009-11-03 20:59:22 +00:00
Nicholas Marriott
5289da29ba Change session and client activity and creation time members to have more
meaningful names.

Also, remove the code to try and update the session activity time for the
command client when a command message is received as is pointless because it
des not have a session.
2009-11-03 20:29:47 +00:00
Nicholas Marriott
c95f1d1ff9 tv member of struct paste_buffer is updated but not otherwise used, so remove
it.
2009-11-03 17:17:24 +00:00
Tiago Cunha
053e40572c Sync OpenBSD patchset 475:
Add a flag for jobs that shouldn't be freed after they've died and use it for
status jobs, then only kill those jobs when status-left, status-right or
set-titles-string is changed.

Fixes problems with changing options from inside #().
2009-11-02 21:38:27 +00:00
Tiago Cunha
738489f2bb Sync OpenBSD patchset 472:
If any client currently displaying a window pane has more than 1 KB of output
buffered, don't accept any further data from the process running in the pane.

This makes tmux much more responsive when flooded with output, although other
buffers can still have an impact when running remotely.

Prompted by a query from Ranganathan Sankaralingam.
2009-11-02 21:32:52 +00:00
Nicholas Marriott
86182f33c3 Double the escape timer (the time after a \033 is received before tmux gives up
waiting to see if it is part of a key sequence and passes it through) to 500
ms, the previous setting was too fast. Suggested by naddy.
2009-11-02 20:18:22 +00:00
Nicholas Marriott
2f813ef75d Add a flag for jobs that shouldn't be freed after they've died and use it for
status jobs, then only kill those jobs when status-left, status-right or
set-titles-string is changed.

Fixes problems with changing options from inside #().
2009-11-01 23:20:37 +00:00
Tiago Cunha
f4514f5c60 Sync OpenBSD patchset 468:
Move the poll registration functions into the server-*.c files.
2009-10-28 23:14:15 +00:00
Tiago Cunha
10aab82539 Sync OpenBSD patchset 459:
Rewrite xterm-keys code (both input and output) so that works (doesn't always
output the same modifiers, accepts all the possible input keys) and is more
understandable.
2009-10-28 23:03:51 +00:00
Tiago Cunha
1c4b7d33b1 Sync OpenBSD patchset 458:
Support the (mostly new) function key+modifier caps (kIC-kIC7). Most of these
will be caught (soon) by the xterm keys code in xterm itself but some other
descriptions such as rxvt define them as well.
2009-10-28 23:01:44 +00:00
Nicholas Marriott
dc3fdc8dc7 If any client currently displaying a window pane has more than 1 KB of output
buffered, don't accept any further data from the process running in the pane.

This makes tmux much more responsive when flooded with output, although other
buffers can still have an impact when running remotely.

Prompted by a query from Ranganathan Sankaralingam.
2009-10-28 22:53:14 +00:00
Tiago Cunha
4f7e669271 Sync OpenBSD patchset 450:
Rename keypad keys to something more useful.
2009-10-28 22:53:03 +00:00
Tiago Cunha
41863470ba Sync OpenBSD patchset 446:
Remove the -d flag to tmux and just use op/AX to detect default colours.

Irritatingly, although op can be used to tell if a terminal supports default
colours, it can't be used to set them because in some terminfo descriptions it
resets attributes as a side-effect (acts as sgr0) and in others it doesn't, so
it is not possible to determine reliably what the terminal state will be
afterwards. So if AX is missing and op is present, tmux just sends sgr0.

Anyone using -d for a terminal who finds they actually needed it can replace it
using terminal-overrides, but please let me know as it is probably an omission
from terminfo.
2009-10-28 22:48:35 +00:00
Nicholas Marriott
37ffdff5ba Move the poll registration functions into the server-*.c files. 2009-10-27 13:03:33 +00:00
Nicholas Marriott
fd2ef18a70 Rewrite xterm-keys code (both input and output) so that works (doesn't always
output the same modifiers, accepts all the possible input keys) and is more
understandable.
2009-10-26 17:46:33 +00:00
Nicholas Marriott
c92c2bfb10 Support the (mostly new) function key+modifier caps (kIC-kIC7). Most of these
will be caught (soon) by the xterm keys code in xterm itself but some other
descriptions such as rxvt define them as well.
2009-10-26 16:00:51 +00:00
Nicholas Marriott
db4452d307 Rename keypad keys to something more useful. 2009-10-26 13:13:33 +00:00
Nicholas Marriott
3a7636ff0f Remove the -d flag to tmux and just use op/AX to detect default colours.
Irritatingly, although op can be used to tell if a terminal supports default
colours, it can't be used to set them because in some terminfo descriptions it
resets attributes as a side-effect (acts as sgr0) and in others it doesn't, so
it is not possible to determine reliably what the terminal state will be
afterwards. So if AX is missing and op is present, tmux just sends sgr0.

Anyone using -d for a terminal who finds they actually needed it can replace it
using terminal-overrides, but please let me know as it is probably an omission
from terminfo.
2009-10-25 21:11:21 +00:00
Tiago Cunha
cc9ef11985 Sync OpenBSD patchset 438:
Split the server code handling clients, jobs and windows off into separate
files from server.c (merging server-msg.c into the client file) and rather than
iterating over each set after poll(), allow a callback to be specified when the
fd is added and just walk once over the returned pollfds calling each callback
where needed.

More to come, getting this in so it is tested.
2009-10-23 17:49:47 +00:00
Tiago Cunha
84392ffc0d Sync OpenBSD patchset 433:
Client tidying: get rid of client_ctx struct in favour of two variables in
client.c, and move the functions in client-fn.c into other files.
2009-10-23 17:32:26 +00:00
Tiago Cunha
31552722a8 Sync OpenBSD patchset 431:
Remove unused function.
2009-10-23 17:27:40 +00:00
Tiago Cunha
f41a3914a5 Sync OpenBSD patchset 421:
Try to reduce the UTF-8 mess.

Get rid of passing around u_char[4]s and define a struct utf8_data which has
character data, size (sequence length) and width. Move UTF-8 character
collection into two functions utf8_open/utf8_append in utf8.c which fill in
this struct and use these functions from input.c and the various functions in
screen-write.c.

Space for rather more data than is necessary for one UTF-8 sequence is in the
utf8_data struct because screen_write_copy is still nasty and needs to reinject
the character (after combining) into screen_write_cell.
2009-10-23 17:16:25 +00:00
Tiago Cunha
c643ac4827 Sync OpenBSD patchset 420:
UTF-8 combined character fixes.

Thai can have treble combinations (1 x width=1 then 2 x width=0) so bump the
UTF-8 cell data size to 9 and alter the code to allow this.

Also break off the combining code into a separate function, handle any further
combining beyond the buffer size by replacing the character with _s, and when
redrawing the UTF-8 character don't assume the first part has just been
printed, redraw the entire line.
2009-10-23 17:13:10 +00:00
Tiago Cunha
516bfe7ba3 Sync OpenBSD patchset 418:
Nuke stray blank line.
2009-10-23 17:10:00 +00:00
Tiago Cunha
ac4e4a2b6c Sync OpenBSD patchset 414:
Instead of having a complicated check to see if the cursor is in the last
position to avoid an explicit wrap, actually move it there.

Some UTF-8 fixes to come.
2009-10-23 17:06:23 +00:00
Nicholas Marriott
eddcc3dfa9 Split the server code handling clients, jobs and windows off into separate
files from server.c (merging server-msg.c into the client file) and rather than
iterating over each set after poll(), allow a callback to be specified when the
fd is added and just walk once over the returned pollfds calling each callback
where needed.

More to come, getting this in so it is tested.
2009-10-22 19:41:51 +00:00
Nicholas Marriott
90ad041fa5 Client tidying: get rid of client_ctx struct in favour of two variables in
client.c, and move the functions in client-fn.c into other files.
2009-10-21 20:11:47 +00:00
Nicholas Marriott
a22c06a2d6 Remove unused function. 2009-10-21 18:20:16 +00:00
Nicholas Marriott
1af09d6330 Try to reduce the UTF-8 mess.
Get rid of passing around u_char[4]s and define a struct utf8_data which has
character data, size (sequence length) and width. Move UTF-8 character
collection into two functions utf8_open/utf8_append in utf8.c which fill in
this struct and use these functions from input.c and the various functions in
screen-write.c.

Space for rather more data than is necessary for one UTF-8 sequence is in the
utf8_data struct because screen_write_copy is still nasty and needs to reinject
the character (after combining) into screen_write_cell.
2009-10-20 19:18:28 +00:00
Nicholas Marriott
62f234ce3b UTF-8 combined character fixes.
Thai can have treble combinations (1 x width=1 then 2 x width=0) so bump the
UTF-8 cell data size to 9 and alter the code to allow this.

Also break off the combining code into a separate function, handle any further
combining beyond the buffer size by replacing the character with _s, and when
redrawing the UTF-8 character don't assume the first part has just been
printed, redraw the entire line.
2009-10-20 17:33:33 +00:00
Nicholas Marriott
d1e6388fed Nuke stray blank line. 2009-10-20 14:22:57 +00:00
Nicholas Marriott
43d62c1ae3 Instead of having a complicated check to see if the cursor is in the last
position to avoid an explicit wrap, actually move it there.

Some UTF-8 fixes to come.
2009-10-17 08:24:46 +00:00
Tiago Cunha
3d88da7b2a Sync OpenBSD patchset 409:
Move lines into the history when scrolling even if the scroll region is not
the entire screen.

Allows ircII users to see history, prompted by naddy.
2009-10-15 01:55:12 +00:00
Tiago Cunha
a505ca69d9 Sync OpenBSD patchset 407:
Add mode keys to move the cursor to the top, middle and bottom of the screen.
H/M/L in vi mode and M-R/M-r in emacs (bottom of screen not bound in emacs).
2009-10-15 01:52:47 +00:00
Tiago Cunha
6103628129 Sync OpenBSD patchset 401:
When drawing lines that have wrapped naturally, don't force a newline but
permit them to wrap naturally again. This allows terminals that use this to
guess where lines start and end for eg mouse selecting (like xterm) to work
correctly.

This was another long-standing issue raised by several people over the last
while.

Thanks to martynas@ for much testing. This was not trivial to get right so
bringing it in for wider testing and adn to fix any further glitches in-tree.
2009-10-15 01:41:14 +00:00
Tiago Cunha
cbd3b1bc9b Sync OpenBSD patchset 400:
When backspace is received at the beginning of a line and the previous line was
wrapped, move the cursor back up to the end of the previous line.

Another one of the forgotten persons requested this quite a while ago (I need
to start noting names on todo items...) when it was quite hard to
implement. Now it is easy and I don't see it can do any harm, so hey presto...
2009-10-15 01:39:30 +00:00
Tiago Cunha
44fd6f4381 Sync OpenBSD patchset 395:
Use relative cursor movement instead of absolute when possible and when
supported by the terminal to reduce the size of the output data (generally
about 10-20%).
2009-10-15 01:33:21 +00:00
Tiago Cunha
8bdcc10c8f Sync OpenBSD patchset 393:
Similarly add a tty_cursor_pane function to tidy up most of the calls.
2009-10-15 01:30:00 +00:00
Tiago Cunha
6369fca253 Sync OpenBSD patchset 392:
_absolute is redundant, just use tty_region.
2009-10-15 01:28:14 +00:00
Tiago Cunha
9b771a96f0 Sync OpenBSD patchset 391:
Cleanup: use two functions for region setting, one for absolute and one inside
pane.
2009-10-15 01:26:50 +00:00
Nicholas Marriott
ad566a86de Move lines into the history when scrolling even if the scroll region is not
the entire screen.

Allows ircII users to see history, prompted by naddy.
2009-10-13 15:38:37 +00:00
Nicholas Marriott
38df960e68 Add mode keys to move the cursor to the top, middle and bottom of the screen.
H/M/L in vi mode and M-R/M-r in emacs (bottom of screen not bound in emacs).
2009-10-13 13:45:56 +00:00
Nicholas Marriott
d7626cd9d7 When drawing lines that have wrapped naturally, don't force a newline but
permit them to wrap naturally again. This allows terminals that use this to
guess where lines start and end for eg mouse selecting (like xterm) to work
correctly.

This was another long-standing issue raised by several people over the last
while.

Thanks to martynas@ for much testing. This was not trivial to get right so
bringing it in for wider testing and adn to fix any further glitches in-tree.
2009-10-12 17:19:47 +00:00
Nicholas Marriott
8608c6970d When backspace is received at the beginning of a line and the previous line was
wrapped, move the cursor back up to the end of the previous line.

Another one of the forgotten persons requested this quite a while ago (I need
to start noting names on todo items...) when it was quite hard to
implement. Now it is easy and I don't see it can do any harm, so hey presto...
2009-10-12 16:59:55 +00:00
Nicholas Marriott
687c4a9fab Use relative cursor movement instead of absolute when possible and when
supported by the terminal to reduce the size of the output data (generally
about 10-20%).
2009-10-12 13:01:18 +00:00
Nicholas Marriott
762459954f Similarly add a tty_cursor_pane function to tidy up most of the calls. 2009-10-12 09:29:58 +00:00
Nicholas Marriott
972a6f5656 _absolute is redundant, just use tty_region. 2009-10-12 09:16:59 +00:00
Nicholas Marriott
f05b32f7ad Cleanup: use two functions for region setting, one for absolute and one inside
pane.
2009-10-12 09:09:35 +00:00
Tiago Cunha
6091b051fb Sync OpenBSD patchset 387:
Add a pipe-pane command to allow a pane to be piped to a shell command, for
example:

        pipe-pane 'cat >~/out'

No arguments stops outputing and closes the pipe; the -o flag toggles a pipe
and on and off (useful for key bindings).

Suggested by espie@.
2009-10-12 00:35:08 +00:00
Tiago Cunha
1b03bc2404 Sync OpenBSD patchset 382:
Collect status from dead jobs and don't invoke the callback until both
all input (the socket is closed) and status is available.
2009-10-12 00:21:08 +00:00
Tiago Cunha
b26ea8462e Sync OpenBSD patchset 381:
Clean up by introducing a wrapper struct for mouse clicks rather than passing
three u_chars around.

As a side-effect this fixes incorrectly rejecting high cursor positions
(because it was comparing them as signed char), reported by Tom Doherty.
2009-10-12 00:18:19 +00:00
Tiago Cunha
d7fa9bc056 Sync OpenBSD patchset 379:
Put all jobs on a global all_jobs list and use that in server.c instead of
running through all the clients.
2009-10-12 00:12:33 +00:00
Tiago Cunha
0b8a7dc4a2 Sync OpenBSD patchset 377:
Split list-panes off from list-windows.
2009-10-12 00:08:12 +00:00
Tiago Cunha
bc236109fd Sync OpenBSD patchset 374:
Rather than running status-left, status-right and window title #() with popen
immediately every redraw, queue them up and run them in the background,
starting each once every status-interval. The actual status line uses the
output from the last run.

This brings several advantages:

- tmux itself may be called from inside #() without causing the server to hang;
- likewise, sleep or similar doesn't cause the server to block;
- commands aren't run excessively often when redrawing;
- commands shared by status-left and status-right, or used multiple times, will
  only be run once.

run-shell and if-shell still use system()/popen() but will be changed over to
use this too later.
2009-10-11 23:55:26 +00:00
Tiago Cunha
ea1721bcb0 Sync OpenBSD patchset 373:
New option, mouse-select-pane. If on, the mouse may be used to select the
current pane.

Suggested by sthen@ and also by someone else ages ago who I have forgotten.
2009-10-11 23:46:02 +00:00
Tiago Cunha
6a1ebb11df Sync OpenBSD patchset 371:
Add "grouped sessions" which have independent name, options, current window and
so on but where the linked windows are synchronized (ie creating, killing
windows and so on are mirrored between the sessions). A grouped session may be
created by passing -t to new-session.

Had this around for a while, tested by a couple of people.
2009-10-11 23:38:16 +00:00
Tiago Cunha
91e4dc83fc Sync OpenBSD patchset 370:
Support for individual session idle time locking. May be enabled by turning off
the lock-server option (it is on by default). When this is off, each session
locks when it has been idle for the lock-after-time setting. When on, the
entire server locks when ALL sessions have been idle for their individual
lock-after-time settings.

This replaces one global-only option (lock-after-time) with another
(lock-server), but the default behaviour is usually preferable so there don't
seem to be many alternatives.

Diff/idea largely from Thomas Adam, tweaked by me.
2009-10-11 23:30:28 +00:00
Nicholas Marriott
64b5f39656 Add a pipe-pane command to allow a pane to be piped to a shell command, for
example:

	pipe-pane 'cat >~/out'

No arguments stops outputing and closes the pipe; the -o flag toggles a pipe
and on and off (useful for key bindings).

Suggested by espie@.
2009-10-11 10:04:27 +00:00
Nicholas Marriott
ff4b4e667a Collect status from dead jobs and don't invoke the callback until both
all input (the socket is closed) and status is available.
2009-10-11 07:20:16 +00:00
Nicholas Marriott
4bc0f6e7e9 Clean up by introducing a wrapper struct for mouse clicks rather than passing
three u_chars around.

As a side-effect this fixes incorrectly rejecting high cursor positions
(because it was comparing them as signed char), reported by Tom Doherty.
2009-10-11 07:01:10 +00:00
Nicholas Marriott
095ecf2d90 Put all jobs on a global all_jobs list and use that in server.c instead of
running through all the clients.
2009-10-10 18:42:14 +00:00
Nicholas Marriott
5aa49e695e Split list-panes off from list-windows. 2009-10-10 17:19:38 +00:00
Nicholas Marriott
6bca92db4d Rather than running status-left, status-right and window title #() with popen
immediately every redraw, queue them up and run them in the background,
starting each once every status-interval. The actual status line uses the
output from the last run.

This brings several advantages:

- tmux itself may be called from inside #() without causing the server to hang;
- likewise, sleep or similar doesn't cause the server to block;
- commands aren't run excessively often when redrawing;
- commands shared by status-left and status-right, or used multiple times, will
  only be run once.

run-shell and if-shell still use system()/popen() but will be changed over to
use this too later.
2009-10-10 15:03:01 +00:00
Nicholas Marriott
4658c063d5 New option, mouse-select-pane. If on, the mouse may be used to select the
current pane.

Suggested by sthen@ and also by someone else ages ago who I have forgotten.
2009-10-10 14:51:16 +00:00
Nicholas Marriott
9dd72b9583 Add "grouped sessions" which have independent name, options, current window and
so on but where the linked windows are synchronized (ie creating, killing
windows and so on are mirrored between the sessions). A grouped session may be
created by passing -t to new-session.

Had this around for a while, tested by a couple of people.
2009-10-10 10:02:48 +00:00
Nicholas Marriott
b7d031cc92 Support for individual session idle time locking. May be enabled by turning off
the lock-server option (it is on by default). When this is off, each session
locks when it has been idle for the lock-after-time setting. When on, the
entire server locks when ALL sessions have been idle for their individual
lock-after-time settings.

This replaces one global-only option (lock-after-time) with another
(lock-server), but the default behaviour is usually preferable so there don't
seem to be many alternatives.

Diff/idea largely from Thomas Adam, tweaked by me.
2009-10-10 09:46:11 +00:00
Tiago Cunha
cddb781127 Sync OpenBSD patchset 368:
The UTF-8 detection idea doesn't work and I am reasonably happy with the
current methods, so remove the (already #ifdef 0'd) code.
2009-10-09 13:11:42 +00:00
Nicholas Marriott
bf38a311da The UTF-8 detection idea doesn't work and I am reasonably happy with the
current methods, so remove the (already #ifdef 0'd) code.
2009-10-09 07:33:12 +00:00
Tiago Cunha
f881502f84 Sync OpenBSD patchset 362:
Remove scroll mode which is now redundant, copy mode should be used instead.

The = key binding now does nothing.
2009-10-06 14:14:07 +00:00
Tiago Cunha
32291172bf Sync OpenBSD patchset 361:
Make C-Up and C-Down in copy mode scroll the screen up and down one line
without moving the cursor, like Up and Down in scroll mode (which will shortly
disappear).
2009-10-06 14:10:10 +00:00
Tiago Cunha
eb7f8b6d33 Sync OpenBSD patchset 360:
If no target client is specified to commands which accept one, try to guess the
current client, in a similar manner to how sessions already work: if the
current session can be established and has only one client, use that; otherwise
use the most recently created client.
2009-10-06 14:00:50 +00:00
Nicholas Marriott
35ca994ba2 Remove scroll mode which is now redundant, copy mode should be used instead.
The = key binding now does nothing.
2009-10-06 07:19:32 +00:00
Nicholas Marriott
9400fdac77 Make C-Up and C-Down in copy mode scroll the screen up and down one line
without moving the cursor, like Up and Down in scroll mode (which will shortly
disappear).
2009-10-06 07:09:00 +00:00
Nicholas Marriott
4ca2200d83 If no target client is specified to commands which accept one, try to guess the
current client, in a similar manner to how sessions already work: if the
current session can be established and has only one client, use that; otherwise
use the most recently created client.
2009-10-05 18:30:54 +00:00
Tiago Cunha
88c3b9c989 Sync OpenBSD patchset 353:
New lock-client and lock-session commands to lock an individual client or all
clients attached to a session respectively.
2009-09-25 17:51:39 +00:00
Tiago Cunha
b5d23ef38b Sync OpenBSD patchset 351:
Remove PROMPT_HIDDEN code which is now unused.
2009-09-25 17:45:46 +00:00
Nicholas Marriott
8fa1858a2c New lock-client and lock-session commands to lock an individual client or all
clients attached to a session respectively.
2009-09-24 14:17:09 +00:00
Tiago Cunha
5be3fb86b9 Sync OpenBSD patchset 350:
Support -c like sh(1) to execute a command, useful when tmux is a login
shell. Suggested by halex@.

This includes another protocol version increase (the last for now) so again
restart the tmux server before upgrading.
2009-09-23 15:18:56 +00:00
Tiago Cunha
1310ea2729 Sync OpenBSD patchset 347:
Remove the internal tmux locking and instead detach each client and run the
command specified by a new option "lock-command" (by default "lock -np") in
each client.

This means each terminal has to be unlocked individually but simplifies the
code and allows the system password to be used to unlock.

Note that the set-password command is gone, so it will need to be removed from
configuration files, and the -U command line flag has been removed.

This is the third protocol version change so again it is best to stop the tmux
server before upgrading.
2009-09-23 15:00:09 +00:00
Tiago Cunha
2acf349d4e Sync OpenBSD patchset 346:
Trim some code by moving the ioctl(TIOCGWINSZ) after SIGWINCH from the client
into the server.

This is another (the second of four) protocol version changes coming this
morning, so again the server should be killed before upgrading.
2009-09-23 14:44:02 +00:00
Nicholas Marriott
fecf8dc44e Remove PROMPT_HIDDEN code which is now unused. 2009-09-23 14:42:48 +00:00
Tiago Cunha
acedc2dcf2 Sync OpenBSD patchset 345:
Don't attempt to open() the tty path, rely on the client sending its stdin fd
with imsg and fatal if it doesn't, then set the FD_CLOEXEC flag in tty_init
instead of tty_open to prevent them leaking into child processes if any are
created between the two calls.

This bumps the protocol version, so the tmux server should be killed before
upgrading.
2009-09-23 14:39:30 +00:00
Nicholas Marriott
9200a0be7a Support -c like sh(1) to execute a command, useful when tmux is a login
shell. Suggested by halex@.

This includes another protocol version increase (the last for now) so again
restart the tmux server before upgrading.
2009-09-23 12:03:30 +00:00
Nicholas Marriott
b01dcd7971 Remove the internal tmux locking and instead detach each client and run the
command specified by a new option "lock-command" (by default "lock -np") in
each client.

This means each terminal has to be unlocked individually but simplifies the
code and allows the system password to be used to unlock.

Note that the set-password command is gone, so it will need to be removed from
configuration files, and the -U command line flag has been removed.

This is the third protocol version change so again it is best to stop the tmux
server before upgrading.
2009-09-23 06:18:47 +00:00
Nicholas Marriott
962fa20b36 Trim some code by moving the ioctl(TIOCGWINSZ) after SIGWINCH from the client
into the server.

This is another (the second of four) protocol version changes coming this
morning, so again the server should be killed before upgrading.
2009-09-23 06:12:58 +00:00
Nicholas Marriott
64caf59e84 Don't attempt to open() the tty path, rely on the client sending its stdin fd
with imsg and fatal if it doesn't, then set the FD_CLOEXEC flag in tty_init
instead of tty_open to prevent them leaking into child processes if any are
created between the two calls.

This bumps the protocol version, so the tmux server should be killed before
upgrading.
2009-09-23 06:05:02 +00:00
Tiago Cunha
df7b68480c Sync OpenBSD patchset 343:
Permit multiple prefix keys to be defined, separated by commas, for example:

set -g prefix ^a,^b

Any key in the list acts as the prefix. The send-prefix command always sends
the first key in the list.
2009-09-22 14:22:21 +00:00
Tiago Cunha
59e65cbda2 Sync OpenBSD patchset 340:
Use option print function for info messages as well.
2009-09-22 13:59:46 +00:00
Tiago Cunha
649b7c132d Sync OpenBSD patchset 339:
Move common code from show-options and show-window-options into a function.
2009-09-22 13:56:02 +00:00
Tiago Cunha
f2d249fdc7 Sync OpenBSD patchset 337:
Drop tiny union from option struct.
2009-09-22 13:49:13 +00:00
Tiago Cunha
c28d4e41cf Sync OpenBSD patchset 336:
Key options were implemented as a number so these struct members are unused.
2009-09-22 13:45:06 +00:00
Nicholas Marriott
96dd3e8eb9 Permit multiple prefix keys to be defined, separated by commas, for example:
set -g prefix ^a,^b

Any key in the list acts as the prefix. The send-prefix command always sends
the first key in the list.
2009-09-22 12:38:10 +00:00
Nicholas Marriott
6b37b2d79d Use option print function for info messages as well. 2009-09-21 14:56:03 +00:00
Nicholas Marriott
e3c3d746f7 Move common code from show-options and show-window-options into a function. 2009-09-21 14:46:47 +00:00
Nicholas Marriott
fc9107a16a Drop tiny union from option struct. 2009-09-21 07:00:09 +00:00
Nicholas Marriott
c7a8db5543 Key options were implemented as a number so these struct members are unused. 2009-09-21 06:55:06 +00:00
Tiago Cunha
e3dcc5327a Sync OpenBSD patchset 335:
run-shell command to run a shell command without opening a window, sending
stdout to output mode.
2009-09-20 22:20:10 +00:00
Tiago Cunha
7335ef5792 Sync OpenBSD patchset 333:
Move some common and untidy code for window link/unlink into generic functions
instead of duplicating it in move/link window..
2009-09-20 22:15:32 +00:00
Nicholas Marriott
14ebcab5b0 run-shell command to run a shell command without opening a window, sending
stdout to output mode.
2009-09-20 19:15:01 +00:00
Nicholas Marriott
9b5f5ed8e8 Move some common and untidy code for window link/unlink into generic functions
instead of duplicating it in move/link window..
2009-09-20 17:27:18 +00:00
Nicholas Marriott
15b643fc11 Sync from OpenBSD:
==
Rather than constructing an entire termios struct from ttydefaults.h, just let
forkpty do it and then alter the bits that should be changed after fork. A
little neater and more portable.
==

This should fix problems caused by glibc's broken ttydefaults.h file.
2009-09-16 12:36:28 +00:00
Nicholas Marriott
5c60162e3c Rather than constructing an entire termios struct from ttydefaults.h, just let
forkpty do it and then alter the bits that should be changed after fork. A
little neater and more portable.
2009-09-16 12:35:04 +00:00
Tiago Cunha
960cd3da69 Sync OpenBSD patchset 326:
Nuke unused server_client_index function, pointed out by martynas@.
2009-09-15 23:50:32 +00:00
Nicholas Marriott
8548624676 Nuke unused server_client_index function, pointed out by martynas@. 2009-09-14 11:25:35 +00:00
Tiago Cunha
69e7f4af19 Sync OpenBSD patchset 324:
Tidy some common code for destroying sessions into a new function.
2009-09-13 20:37:37 +00:00
Nicholas Marriott
8cb8a0da8d Tidy some common code for destroying sessions into a new function. 2009-09-12 13:01:19 +00:00
Tiago Cunha
0ec1ce005c Sync OpenBSD patchset 322:
Permit options such as status-bg to be configured using the entire 256 colour
palette by setting "colour0" to "colour255".
2009-09-11 14:13:52 +00:00
Nicholas Marriott
372a8cb1d9 Permit options such as status-bg to be configured using the entire 256 colour
palette by setting "colour0" to "colour255".
2009-09-10 17:16:24 +00:00
Tiago Cunha
930f67f474 Sync OpenBSD patchset 320:
Reference count clients and sessions rather than relying on a saved index for
cmd-choose-*.
2009-09-07 23:59:19 +00:00
Tiago Cunha
c272de7cba Sync OpenBSD patchset 318:
Give each paste buffer a size member instead of requiring them to be
zero-terminated.
2009-09-07 23:48:54 +00:00
Tiago Cunha
5edc465802 Sync OpenBSD patchset 317:
Permit embedded colour and attributes in status-left and status-right using new
#[] special characters, for example #[fg=red,bg=blue,blink].
2009-09-07 23:37:48 +00:00
Nicholas Marriott
51c95747d8 Reference count clients and sessions rather than relying on a saved index for
cmd-choose-*.
2009-09-07 21:01:50 +00:00
Nicholas Marriott
ccba613e5b Give each paste buffer a size member instead of requiring them to be
zero-terminated.
2009-09-07 18:50:45 +00:00
Nicholas Marriott
e97006b102 Permit embedded colour and attributes in status-left and status-right using new
#[] special characters, for example #[fg=red,bg=blue,blink].
2009-09-07 10:49:32 +00:00
Tiago Cunha
884ebb6dab Sync OpenBSD patchset 309:
Accept -l to make it easier for people who use tmux as a login shell to use
$SHELL. Originally from martynas@, tweaked by me.
2009-09-03 21:02:55 +00:00
Tiago Cunha
f796336a12 Sync OpenBSD patchset 308:
When incorrect passwords are entered, behave similarly to login(1) and backoff
for a bit. Based on a diff from martynas@.
2009-09-03 20:44:38 +00:00
Tiago Cunha
3b944fe7e8 Sync OpenBSD patchset 307:
Add a transpose-chars command in edit mode (C-t in emacs mode only). From Kalle
Olavi Niemitalo.
2009-09-02 22:45:17 +00:00
Nicholas Marriott
d33caca6c7 That was the wrong fix. MSG_ERROR should set the error and the client should
use the error and exit on MSG_EXIT (it was being handled in the default
case). Undo the last change, move the errstr check into the MSG_EXIT case, and
add a comment.
2009-09-02 20:16:29 +00:00
Nicholas Marriott
459abafcea That was the wrong fix. MSG_ERROR should set the error and the client should
use the error and exit on MSG_EXIT (it was being handled in the default
case). Undo the last change, move the errstr check into the MSG_EXIT case, and
add a comment.
2009-09-02 20:15:49 +00:00
Nicholas Marriott
c23bde74ec Set exittype for error exit as well as the error string. 2009-09-02 20:01:22 +00:00
Nicholas Marriott
7a4bac82d7 Set exittype for error exit as well as the error string. 2009-09-02 20:00:10 +00:00
Nicholas Marriott
74c35c513e Accept -l to make it easier for people who use tmux as a login shell to use
$SHELL. Originally from martynas@, tweaked by me.
2009-09-02 17:34:57 +00:00
Nicholas Marriott
c5ac2579ba When incorrect passwords are entered, behave similarly to login(1) and backoff
for a bit. Based on a diff from martynas@.
2009-09-02 16:38:35 +00:00
Nicholas Marriott
61b7dc522d Add a transpose-chars command in edit mode (C-t in emacs mode only). From Kalle
Olavi Niemitalo.
2009-09-02 06:33:20 +00:00
Tiago Cunha
a3a150faf2 Sync OpenBSD patchset 305:
When using tmux as a login shell, there is currently no way to specify a shell
to be used as a login shell inside tmux, so add a default-shell session option.
This sets the shell invoked as a login shell when the default-command option is
empty.

The default option value is whichever of $SHELL, getpwuid(getuid())'s pw_shell
or /bin/sh is valid first.

Based on a diff from martynas@, changed by me to be a session option rather
than a window option.
2009-09-02 01:02:44 +00:00
Nicholas Marriott
7d5e494716 When using tmux as a login shell, there is currently no way to specify a shell
to be used as a login shell inside tmux, so add a default-shell session option.
This sets the shell invoked as a login shell when the default-command option is
empty.

The default option value is whichever of $SHELL, getpwuid(getuid())'s pw_shell
or /bin/sh is valid first.

Based on a diff from martynas@, changed by me to be a session option rather
than a window option.
2009-09-01 13:09:49 +00:00
Tiago Cunha
ed3535db8a Sync OpenBSD patchset 302:
Add a new display-panes command, with two options (display-panes-colour and
display-panes-time), which displays a visual indication of the number of each
pane.
2009-08-31 22:30:15 +00:00
Nicholas Marriott
04319964b9 Add a new display-panes command, with two options (display-panes-colour and
display-panes-time), which displays a visual indication of the number of each
pane.
2009-08-31 20:46:19 +00:00
Tiago Cunha
8fd77cbb5b Sync OpenBSD patchset 294:
Add a choose-client command and extend choose-{session,window} to accept a
template. After a choice is made, %% (or %1) in the template is replaced by the
name of the session, window or client suitable for -t and the result executed
as a command. So, for example, "choose-window "killw -t '%%'"" will kill the
selected window.

The defaults if no template is given are (as now) select-window for
choose-window, switch-client for choose-session, and detach-client for
choose-client (now bound to D).
2009-08-25 13:53:39 +00:00
Tiago Cunha
c1653ff654 Sync OpenBSD patchset 293:
gcc2 doesn't understand attributes on function pointers.
2009-08-25 13:11:24 +00:00
Nicholas Marriott
7b847ced4a Add a choose-client command and extend choose-{session,window} to accept a
template. After a choice is made, %% (or %1) in the template is replaced by the
name of the session, window or client suitable for -t and the result executed
as a command. So, for example, "choose-window "killw -t '%%'"" will kill the
selected window.

The defaults if no template is given are (as now) select-window for
choose-window, switch-client for choose-session, and detach-client for
choose-client (now bound to D).
2009-08-25 12:18:51 +00:00
Tiago Cunha
35b926c445 Sync OpenBSD patchset 290:
When using source-file, run the commands in the context of the source-file
command rather than with no context. This makes things like attach work from a
file.
2009-08-24 16:27:03 +00:00
Tiago Cunha
2e2e762743 Sync OpenBSD patchset 289:
The cursession member in struct cmd_ctx is always either curclient->session or
NULL when curclient is also NULL, so just eliminate it.
2009-08-24 16:24:18 +00:00
Nicholas Marriott
4f1d81c4ce gcc2 doesn't understand attributes on function pointers. 2009-08-24 08:03:11 +00:00
Nicholas Marriott
c7394ac4e0 When using source-file, run the commands in the context of the source-file
command rather than with no context. This makes things like attach work from a
file.
2009-08-23 17:29:51 +00:00
Nicholas Marriott
43cd40e87a The cursession member in struct cmd_ctx is always either curclient->session or
NULL when curclient is also NULL, so just eliminate it.
2009-08-23 16:45:00 +00:00
Tiago Cunha
1292540bb5 Sync OpenBSD patchset 276:
Extend command-prompt with a -p option which is a comma-separated list of one
or more prompts to present in order.

The responses to the prompt are replaced in the template string: %% are
replaced in order, so the first prompt replaces the first %%, the second
replaces the second, and so on. In addition, %1 up to %9 are replaced with the
responses to the first the ninth prompts

The default template is "%1" so the response to the first prompt is processed
as a command.

Note that this changes the behaviour for %% so if there is only one prompt,
only the first %% will be replaced. Templates such as "neww -n '%%' 'ssh %%'"
should be changed to "neww -n '%1' 'ssh %1'".

From Tiago Cunha.
2009-08-20 11:51:20 +00:00
Tiago Cunha
4631c07483 Sync OpenBSD patchset 275:
Instead of just checking for an empty buffer, which may not be the case if
there is unconsumed data, save the previous size and use it instead. This means
that activity monitoring should work in this (unlikely) event.

Also remove a debugging statement that no longer seems necessary.
2009-08-20 11:48:01 +00:00
Tiago Cunha
52b02850ca Sync OpenBSD patchset 270:
Tag a few missed printf-like functions and fix a missing "%s".
2009-08-20 11:35:16 +00:00
Tiago Cunha
2a5f08c15a Sync OpenBSD patchset 265:
Add a "delete line" key when editing in the status line or the search up/down
prompt. C-u with emacs keys, d with vi.
2009-08-20 11:22:48 +00:00
Tiago Cunha
70fc085862 Sync OpenBSD patchset 264:
Add (naive) searching and goto line in copy mode. Searching is C-r and C-s with
emacs keys, / and ? with vi; n repeats the search again with either key
set. All searching wraps the top/bottom. Goto line is g for both emacs and vi.

The search prompts don't have full line editing, just simple append and delete
characters.

Also sort the mode keys list in tmux.1.
2009-08-20 11:20:24 +00:00
Nicholas Marriott
3f4418d84d Extend command-prompt with a -p option which is a comma-separated list of one
or more prompts to present in order.

The responses to the prompt are replaced in the template string: %% are
replaced in order, so the first prompt replaces the first %%, the second
replaces the second, and so on. In addition, %1 up to %9 are replaced with the
responses to the first the ninth prompts

The default template is "%1" so the response to the first prompt is processed
as a command.

Note that this changes the behaviour for %% so if there is only one prompt,
only the first %% will be replaced. Templates such as "neww -n '%%' 'ssh %%'"
should be changed to "neww -n '%1' 'ssh %1'".

From Tiago Cunha.
2009-08-19 10:39:50 +00:00
Nicholas Marriott
11f0f812c5 Didn't mean to commit this stuff. 2009-08-19 09:04:48 +00:00
Nicholas Marriott
620402a833 This is a better fix for OS X stupidity. 2009-08-19 09:00:06 +00:00
Nicholas Marriott
036de0c5e4 Instead of just checking for an empty buffer, which may not be the case if
there is unconsumed data, save the previous size and use it instead. This means
that activity monitoring should work in this (unlikely) event.

Also remove a debugging statement that no longer seems necessary.
2009-08-18 21:41:13 +00:00
Nicholas Marriott
dc6271cd79 Tag a few missed printf-like functions and fix a missing "%s". 2009-08-18 14:48:42 +00:00
Nicholas Marriott
feaf91ab93 Add a "delete line" key when editing in the status line or the search up/down
prompt. C-u with emacs keys, d with vi.
2009-08-18 07:23:43 +00:00
Nicholas Marriott
c828c2f366 Add (naive) searching and goto line in copy mode. Searching is C-r and C-s with
emacs keys, / and ? with vi; n repeats the search again with either key
set. All searching wraps the top/bottom. Goto line is g for both emacs and vi.

The search prompts don't have full line editing, just simple append and delete
characters.

Also sort the mode keys list in tmux.1.
2009-08-18 07:08:26 +00:00
Tiago Cunha
6f9a2ee50a Sync OpenBSD patchset 260:
vi(1)-style half page scroll in copy and scroll modes. Move the vi full page
scroll key to C-b instead of C-u and use C-u/C-d for half page scrolling with
vi keys. In emacs mode, half page scrolling is bound to M-Up and M-Down.

Suggested by merdely (about a year ago :-)).
2009-08-16 19:26:49 +00:00
Tiago Cunha
e61ee94e26 Sync OpenBSD patchset 257:
Add a base-index session option to specify the first index checked when looking
for an index for a new window.
2009-08-16 19:16:27 +00:00
Tiago Cunha
f415d43c3b Sync OpenBSD patchset 254:
When creating a new session from the command-line where there is an external
terminal, copy the termios(4) special characters and use them for new windows
created in the new session. Suggested by Theo.
2009-08-16 18:59:12 +00:00
Tiago Cunha
05fe69eb92 Sync OpenBSD patchset 250:
A tty context must not be modified as it may be reused to update multiple
clients, so make it const.

Also fix an actual modification which caused a hang when a session was
connected to multiple terminals at least one of which was missing ich/ich1.
2009-08-14 21:30:24 +00:00
Tiago Cunha
e2a18894b3 Sync OpenBSD patchset 246:
Have the client pass its stdin fd to the server when identifying itself and
have the server use that rather than reopening the tty. If the fd isn't given,
use the old behaviour (so no need for a version change).

This allows tmux to be used as the shell, so also change so that when working
out the command to execute if default-command is empty (the default), tmux will
try not execute itself.
2009-08-14 21:23:20 +00:00
Tiago Cunha
0714e41148 Sync OpenBSD patchset 245:
Add a TTY_OPENED flag and tidy a little.
2009-08-14 21:20:01 +00:00
Tiago Cunha
5cc971facd Sync OpenBSD patchset 244:
Drop the no_stop argument to tty_close and tty_free in favour of a flag in the
tty struct.
2009-08-14 21:17:54 +00:00
Tiago Cunha
b402cef338 Adjust imsg changes to the portable version due to OpenBSD patchset 243. 2009-08-14 21:13:48 +00:00
Tiago Cunha
a9b6bfdddd Sync OpenBSD patchset 243:
Switch tmux to use imsg. This is the last major change to make the
client-server protocol more resilient and make the protocol versioning work
properly. In future, the only things requiring a protocol version bump will be
changes in the message structs, and (when both client and server have this
change) mixing different versions should nicely report an error message.

As a side effect this also makes the code tidier, fixes a problem with the way
errors reported during server startup were handled, and supports fd passing
(which will be used in future).

Looked over by eric@, thanks.

Please note that mixing a client with this change with an older server or vice
versa may cause tmux to crash or hang - tmux should be completely exited before
upgrading.
2009-08-14 21:04:04 +00:00
Nicholas Marriott
7a359c00ac vi(1)-style half page scroll in copy and scroll modes. Move the vi full page
scroll key to C-b instead of C-u and use C-u/C-d for half page scrolling with
vi keys. In emacs mode, half page scrolling is bound to M-Up and M-Down.

Suggested by merdely (about a year ago :-)).
2009-08-13 22:32:18 +00:00
Nicholas Marriott
3ad4de6c8c Add a base-index session option to specify the first index checked when looking
for an index for a new window.
2009-08-13 20:11:58 +00:00
Nicholas Marriott
52793e7a3f When creating a new session from the command-line where there is an external
terminal, copy the termios(4) special characters and use them for new windows
created in the new session. Suggested by Theo.
2009-08-13 19:03:59 +00:00
Nicholas Marriott
bc497dbb92 A tty context must not be modified as it may be reused to update multiple
clients, so make it const.

Also fix an actual modification which caused a hang when a session was
connected to multiple terminals at least one of which was missing ich/ich1.
2009-08-12 09:41:59 +00:00
Nicholas Marriott
4310282a4c Have the client pass its stdin fd to the server when identifying itself and
have the server use that rather than reopening the tty. If the fd isn't given,
use the old behaviour (so no need for a version change).

This allows tmux to be used as the shell, so also change so that when working
out the command to execute if default-command is empty (the default), tmux will
try not execute itself.
2009-08-11 21:28:11 +00:00
Nicholas Marriott
4ec8ade11c Add a TTY_OPENED flag and tidy a little. 2009-08-11 20:29:04 +00:00
Nicholas Marriott
ff65e37545 Drop the no_stop argument to tty_close and tty_free in favour of a flag in the
tty struct.
2009-08-11 19:32:25 +00:00
Nicholas Marriott
f0635717b3 Switch tmux to use imsg. This is the last major change to make the
client-server protocol more resilient and make the protocol versioning work
properly. In future, the only things requiring a protocol version bump will be
changes in the message structs, and (when both client and server have this
change) mixing different versions should nicely report an error message.

As a side effect this also makes the code tidier, fixes a problem with the way
errors reported during server startup were handled, and supports fd passing
(which will be used in future).

Looked over by eric@, thanks.

Please note that mixing a client with this change with an older server or vice
versa may cause tmux to crash or hang - tmux should be completely exited before
upgrading.
2009-08-11 17:18:35 +00:00
Nicholas Marriott
304296972b Sync from OpenBSD:
Add flags for 1+2 and 2 arguments to the generic target code, use it for
cmd-set-environment/option/window-option and remove the generic options
parsing.
2009-08-11 14:42:59 +00:00
Nicholas Marriott
60db6e3df4 Add flags for 1+2 and 2 arguments to the generic target code, use it for
cmd-set-environment/option/window-option and remove the generic options
parsing.
2009-08-11 12:53:37 +00:00
Tiago Cunha
29b1b2fb5e Sync OpenBSD patchset 231:
Infrastructure and commands to manage the environment for processes started
within tmux.

There is a global environment, copied from the external environment when the
server is started and each session has an (initially empty) session
environment which overrides it.

New commands set-environment and show-environment manipulate or display the
environments.

A new session option, update-environment, is a space-separated list of
variables which are updated from the external environment into the session
environment every time a new session is created - the default is DISPLAY.
2009-08-09 17:48:55 +00:00
Tiago Cunha
97eb537f38 Sync OpenBSD patchset 227:
Add a flags member to the grid_line struct and use it to differentiate lines
wrapped at the screen edge from those terminated by a newline. Then use this
when copying to combine wrapped lines together into one.
2009-08-09 17:32:06 +00:00
Tiago Cunha
37b0bcd7c1 Sync OpenBSD patchset 226:
Change the way the grid is stored, previously it was:

- a two-dimensional array of cells;
- a two-dimensional array of utf8 data;
- an array of line lengths.

Now it is a single array of a new struct grid_line each of which represents a
line and contains the length and an array of cells and an array of utf8 data.

This will make it easier to add additional per-line members, such as flags.
2009-08-09 17:28:24 +00:00
Tiago Cunha
5b56ea1816 Sync OpenBSD patchset 225:
If there is an error in the configuration file, don't just exit(1) as this can
cause the client to hang. Instead, send the error message, then mark the client
as bad and start a normal shutdown so the server exits once the error is
written.

This also allows some code duplicating daemon(3) to be trimmed and logging to
begin earlier.

Prompted by Theo noticing the behaviour on error wasn't documented.
2009-08-09 17:19:18 +00:00
Tiago Cunha
05eb4ece44 Sync OpenBSD patchset 223:
Using the alternative screen (smcup/rmcup) should also preserve the current
colours and attributes. Found thanks to a report from Taylor Venable.

While here also nuke a couple of extra blank lines.
2009-08-09 16:57:49 +00:00
Tiago Cunha
65a28912eb Sync OpenBSD patchset 219:
Add a -a flag to set-option and set-window-option to append to an existing
string value, useful for terminal-overrides.
2009-08-09 16:48:34 +00:00
Tiago Cunha
15f6a41a75 Sync OpenBSD patchset 211:
Add a terminal-overrides session option allowing individual terminfo(5) entries
to be overridden. The 88col/256col checks are now moved into the default
setting and out of the code.

Also remove a couple of old workarounds for xterm and rxvt which are no longer
necessary (tmux can emulate them if missing).
2009-08-09 15:26:24 +00:00
Nicholas Marriott
6491274f60 Infrastructure and commands to manage the environment for processes started
within tmux.

There is a global environment, copied from the external environment when the
server is started and each sesssion has an (initially empty) session
environment which overrides it.

New commands set-environment and show-environment manipulate or display the
environments.

A new session option, update-environment, is a space-separated list of
variables which are updated from the external environment into the session
environment every time a new session is created - the default is DISPLAY.
2009-08-08 21:52:43 +00:00
Nicholas Marriott
06ddd3dcf8 Add a flags member to the grid_line struct and use it to differentiate lines
wrapped at the screen edge from those terminated by a newline. Then use this
when copying to combine wrapped lines together into one.
2009-08-08 15:57:49 +00:00
Nicholas Marriott
5e01b6d663 Change the way the grid is stored, previously it was:
- a two-dimensional array of cells;
- a two-dimensional array of utf8 data;
- an array of line lengths.

Now it is a single array of a new struct grid_line each of which represents a
line and containts the length and an array of cells and an array of utf8 data.

This will make it easier to add additional per-line members, such as flags.
2009-08-08 13:29:27 +00:00
Nicholas Marriott
e89e70e715 If there is an error in the configuration file, don't just exit(1) as this can
cause the client to hang. Instead, send the error message, then mark the client
as bad and start a normal shutdown so the server exits once the error is
written.

This also allows some code duplicating daemon(3) to be trimmed and logging to
begin earlier.

Prompted by Theo noticing the behaviour on error wasn't documented.
2009-08-07 15:39:10 +00:00
Nicholas Marriott
04e97e8aef Using the alternative screen (smcup/rmcup) should also preserve the current
colours and attributes. Found thanks to a report from Taylor Venable.

While here also nuke a couple of extra blank lines.
2009-08-07 00:12:13 +00:00
Nicholas Marriott
12ef3ceda1 Add a -a flag to set-option and set-window-option to append to an existing
string value, useful for terminal-overrides.
2009-08-04 18:45:57 +00:00
Nicholas Marriott
1673735f02 Add a terminal-overrides session option allowing individual terminfo(5) entries
to be overridden. The 88col/256col checks are now moved into the default
setting and out of the code.

Also remove a couple of old workarounds for xterm and rxvt which are no longer
necessary (tmux can emulate them if missing).
2009-08-03 14:10:54 +00:00
Tiago Cunha
67266dc25c Sync OpenBSD patchset 202:
There aren't many client message types or code to handle them so get rid of
the lookup table and use a switch, merge the tiny handler functions into it,
and move the whole lot to client.c.

Also change client_msg_dispatch to consume as many messages as possible and
move the call to it to the right place so it checks for signals afterwards.

Prompted by suggestions from eric@.
2009-07-30 20:57:39 +00:00
Tiago Cunha
1650b8552f Sync OpenBSD patchset 200:
Merge pane number into the target specification for pane commands. Instead of
using -p index, a target pane is now addressed with the normal -t window form
but suffixed with a period and a pane index, for example :0.2 or
mysess:mywin.1. An unadorned number such as -t 1 is tried as a pane index in
the current window, if that fails the same rules are followed as for a target
window and the current pane in that window used.

As a side-effect this now means that swap-pane can swap panes between
different windows.

Note that this changes the syntax of the break-pane, clear-history, kill-pane,
resize-pane, select-pane and swap-pane commands.
2009-07-30 20:45:20 +00:00
Tiago Cunha
6fbfcfc0d7 Sync OpenBSD patchset 196:
Rename struct hdrtype to msgtype which is a better name and can be used even
when struct hdr disappears.
2009-07-30 20:21:55 +00:00
Nicholas Marriott
5f13bb0c3a There aren't many client message types or code to handle them so get rid of the
lookup table and use a switch, merge the tiny handler functions into it, and
move the whole lot to client.c.

Also change client_msg_dispatch to consume as many messages as possible and
move the call to it to the right place so it checks for signals afterwards.

Prompted by suggestions from eric@.
2009-07-30 16:32:12 +00:00
Nicholas Marriott
071494d8fa Merge pane number into the target specification for pane commands. Instead of
using -p index, a target pane is now addressed with the normal -t window form
but suffixed with a period and a pane index, for example :0.2 or
mysess:mywin.1. An unadorned number such as -t 1 is tried as a pane index in
the current window, if that fails the same rules are followed as for a target
window and the current pane in that window used.

As a side-effect this now means that swap-pane can swap panes between different
windows.

Note that this changes the syntax of the break-pane, clear-history, kill-pane,
resize-pane, select-pane and swap-pane commands.
2009-07-30 13:45:56 +00:00
Nicholas Marriott
c1d6d7ac6b Rename struct hdrtype to msgtype which is a better name and can be used even
when struct hdr disappears.
2009-07-29 14:17:26 +00:00
Tiago Cunha
522fc94d12 Sync OpenBSD patchset 194:
Final pieces of mode key rebinding: bind-key and unbind-key now accept a -t
argument to modify a table.
2009-07-28 23:19:06 +00:00
Tiago Cunha
de7483a114 Sync OpenBSD patchset 192:
Next step towards customisable mode keys: build each default table of keys
into a named tree on start and use that for lookups. Also add command to string
translation tables and modify list-keys to show the mode key bindings (new
-t argument).
2009-07-28 23:11:18 +00:00
Tiago Cunha
d9dcc5ed44 Sync OpenBSD patchset 191:
If select-layout is not given an argument, reapply the last layout used in the
window, if any.
2009-07-28 23:04:29 +00:00
Tiago Cunha
1c73e75982 Sync OpenBSD patchset 190:
Remove an unused entry in the mode keys command enum and rename
MODEKEYCOPY_QUIT to _CANCEL to match the others.
2009-07-28 22:58:20 +00:00
Tiago Cunha
920b9c5872 Sync OpenBSD patchset 189:
Change mode key bindings from big switches into a set of tables. Rather than
lumping them all together, split editing keys from those used in choice/more
mode and those for copy/scroll mode.

Tidier and clearer, and the first step towards customisable mode keys.
2009-07-28 22:55:59 +00:00
Tiago Cunha
1880b83c37 Sync OpenBSD patchset 188:
Get rid of empty mode_key_free function.
2009-07-28 22:49:26 +00:00
Tiago Cunha
46cb0de347 Sync OpenBSD patchset 187:
Add a key to delete to end of line at the prompt (^K in emacs mode, C/D in
vi).

From Kalle Olavi Niemitalo.
2009-07-28 22:44:38 +00:00
Tiago Cunha
361801aaaa Sync OpenBSD patchset 184:
Detect backspace by looking at termios VERASE and translate it into \177
(which matches screen's behaviour if not its termcap/terminfo entry). The
terminfo kbs cap is often wrong or missing so it can't be used, and just
assuming \177 may be wrong.
2009-07-28 22:37:02 +00:00
Tiago Cunha
d637cb33da Sync OpenBSD patchset 181:
Make all messages sent between the client and server fixed size.

This is the first of two changes to make the protocol more resilient and less
sensitive to other changes in the code, particularly with commands. The client
now packs argv into a buffer and sends it to the server for parsing, rather
than doing it itself and sending the parsed command data.

As a side-effect this also removes a lot of now-unused command marshalling
code.

Mixing a server without this change and a client with or vice versa will cause
tmux to hang or crash, please ensure that tmux is entirely killed before
upgrading.
2009-07-28 22:12:16 +00:00
Nicholas Marriott
f596be9950 Final pieces of mode key rebinding: bind-key and unbind-key now accept a -t
argument to modify a table.
2009-07-28 17:05:10 +00:00
Nicholas Marriott
86785004ba Next step towards customisable mode keys: build each default table of keys into
a named tree on start and use that for lookups. Also add command to string
translation tables and modify list-keys to show the the mode key bindings (new
-t argument).
2009-07-28 07:03:32 +00:00
Nicholas Marriott
2da4864483 If select-layout is not given an argument, repply the last layout used in the
window, if any.
2009-07-28 06:48:44 +00:00
Nicholas Marriott
309b76fb32 Remove an unused entry in the mode keys command enum and rename
MODEKEYCOPY_QUIT to _CANCEL to match the others.
2009-07-27 20:36:13 +00:00
Nicholas Marriott
d95274c5f2 Change mode key bindings from big switches into a set of tables. Rather than
lumping them all together, split editing keys from those used in choice/more
mode and those for copy/scroll mode.

Tidier and clearer, and the first step towards customisable mode keys.
2009-07-27 19:29:35 +00:00
Nicholas Marriott
13e29dd7b5 Get rid of empty mode_key_free function. 2009-07-27 18:51:46 +00:00
Nicholas Marriott
ad0aad21d5 Add a key to delete to end of line at the prompt (^K in emacs mode, C/D in vi).
From Kalle Olavi Niemitalo.
2009-07-27 12:11:11 +00:00
Nicholas Marriott
639fbe0392 Detect backspace by looking at termios VERASE and translate it into \177 (which
matches screen's behaviour if not its termcap/terminfo entry). The terminfo kbs
cap is often wrong or missing so it can't be used, and just assuming \177 may
be wrong.
2009-07-26 21:42:08 +00:00
Nicholas Marriott
34a82e7629 Make all messages sent between the client and server fixed size.
This is the first of two changes to make the protocol more resilient and less
sensitive to other changes in the code, particularly with commands. The client
now packs argv into a buffer and sends it to the server for parsing, rather
than doing it itself and sending the parsed command data.

As a side-effect this also removes a lot of now-unused command marshalling
code.

Mixing a server without this change and a client with or vice versa will cause
tmux to hang or crash, please ensure that tmux is entirely killed before
upgrading.
2009-07-26 12:58:44 +00:00
Tiago Cunha
28cf7dc39e Sync OpenBSD patchset 175:
Permit commands to be bound to key presses without the prefix key first. The
new -n flag to bind-key and unbind-key sets or removes these bindings, and
list-key shows them in []s.
2009-07-25 08:52:04 +00:00
Nicholas Marriott
5a1a106637 Permit commands to be bound to key presses without the prefix key first. The
new -n flag to bind-key and unbind-key sets or removes these bindings, and
list-key shows them in []s.
2009-07-24 14:52:47 +00:00
Tiago Cunha
1870b96578 Sync OpenBSD patchset 172:
Tidy client message return slightly: convert flags into an enum, and merge
error string into struct client_ctx as well.
2009-07-23 23:42:59 +00:00
Nicholas Marriott
16e017d5a6 Tidy client message return slightly: convert flags into an enum, and merge
error string into struct client_ctx as well.
2009-07-23 20:24:27 +00:00
Tiago Cunha
f2451c1e29 Sync OpenBSD patchset 168:
Both of cmdclient and curclient CAN be NULL - if the command is executed from
the configuration file. In this case, attach-session can't do much, and
new-session should just assume -d.
2009-07-23 13:25:27 +00:00
Tiago Cunha
6708ad19c5 Sync OpenBSD patchset 165:
window_add_pane cannot fail, so remove the unused cause argument and don't
bother to check for a NULL return.
2009-07-23 13:10:38 +00:00
Tiago Cunha
c84145751a Sync OpenBSD patchset 164:
tty_write is relatively short and the only function left in tty-write.c so
move it into tty.c.
2009-07-23 12:57:45 +00:00
Tiago Cunha
b72f9bea43 Sync OpenBSD patchset 162:
More tty code tidying: move the saved cursor/region position (from before the
screen was updated) out of struct screen and into struct tty_ctx.
2009-07-23 12:48:18 +00:00
Tiago Cunha
9c6fa90857 Sync OpenBSD patchset 160:
enum tty_cmd is only used as an index into the array of command function
pointers, so remove it and use the function pointers directly to represent
themselves.
2009-07-23 12:38:01 +00:00
Nicholas Marriott
96a7cf1e6a Both of cmdclient and curclient CAN be NULL - if the command is executed from
the configuration file. In this case, attach-session can't do much, and
new-session should just assume -d.
2009-07-23 12:33:48 +00:00
Nicholas Marriott
5ee84436c8 window_add_pane cannot fail, so remove the unused cause argument and don't
bother to check for a NULL return.
2009-07-22 21:34:36 +00:00
Nicholas Marriott
dd4a3b24fc tty_write is relatively short and the only function left in tty-write.c so move
it into tty.c.
2009-07-22 20:56:58 +00:00
Nicholas Marriott
ddad0be5f7 More tty code tidying: move the saved cursor/region position (from before the
screen was updated) out of struct screen and into struct tty_ctx.
2009-07-22 20:53:38 +00:00
Tiago Cunha
b6afa30c39 Sync OpenBSD patchset 159:
There are relatively few arguments to tty_cmd_* functions now, so tidy them up
by using a struct rather than hiding everything with varargs.
2009-07-22 18:08:56 +00:00
Nicholas Marriott
bb4bab4c26 log_debug3 no longer exists, change the sole use in GRID_DEBUG to log_debug2. 2009-07-22 18:06:58 +00:00
Nicholas Marriott
2ec2837daa enum tty_cmd is only used as an index into the array of command function
pointers, so remove it and use the function pointers directly to represent
themselves.
2009-07-22 18:02:23 +00:00
Tiago Cunha
75a44d856e Sync OpenBSD patchset 158:
tty_cmd_raw is only used once, for raw UTF-8 output, so rename it to
tty_cmd_utf8character and eliminate the size argument.
2009-07-22 17:58:42 +00:00
Tiago Cunha
d29b57f597 Sync OpenBSD patchset 155:
Make some functions which return unused values void (mostly found by lint) and
tweak a redundant expression in window_pane_set_mode.
2009-07-22 17:46:53 +00:00
Tiago Cunha
a92993228f Change GRID_DEBUG to use log_debug2 since log_debug3 was removed. 2009-07-22 17:33:02 +00:00
Tiago Cunha
6a97901691 Sync OpenBSD patchset 153:
Remove a couple of unused functions and fix a type ("FALLTHOUGH"), found by
lint.
2009-07-22 17:31:20 +00:00
Tiago Cunha
39aa8b32b1 Restore $Id$. 2009-07-22 16:55:22 +00:00
Tiago Cunha
1bf524c1b7 Sync OpenBSD patchset 152:
__progname is not const, pointed out by deraadt.

And, as a consequence change its declaration for operating systems which
don't provide __progname as well.
2009-07-22 16:53:30 +00:00
Nicholas Marriott
6a309c53a8 There are relatively few arguments to tty_cmd_* functions now, so tidy them up
by using a struct rather than hiding everything with varargs.
2009-07-22 16:45:31 +00:00
Tiago Cunha
a734488a4b Sync OpenBSD patchset 151:
Tidy up keys: use an enum for the key codes, and remove the macros which just
wrap flag sets/clears/tests.
2009-07-22 16:24:59 +00:00
Nicholas Marriott
5bd72ec629 tty_cmd_raw is only used once, for raw UTF-8 output, so rename it to
tty_cmd_utf8character and eliminate the size argument.
2009-07-22 15:55:32 +00:00
Nicholas Marriott
76a9d98562 Make some functions which return unused values void (mostly found by lint) and
tweak a redundant expression in window_pane_set_mode.
2009-07-21 19:54:22 +00:00
Nicholas Marriott
044ebf1952 Remove a couple of unused functions and fix a type ("FALLTHOUGH"), found by
lint.
2009-07-21 18:40:30 +00:00
Nicholas Marriott
b9a179089b __progname is not const, pointed out by deraadt. 2009-07-21 18:38:52 +00:00
Nicholas Marriott
725938fb85 Tidy up keys: use an enum for the key codes, and remove the macros which just
wrap flag sets/clears/tests.
2009-07-21 17:57:29 +00:00
Tiago Cunha
54c6848d75 Sync OpenBSD patchset 148:
Display the number of failed password attempts (if any) when the server is
locked. From Tom Doherty.
2009-07-20 16:07:23 +00:00
Tiago Cunha
545893df73 Sync OpenBSD patchset 142:
Each window now has a tree of layout cells associated with it. In this tree,
each node is either a horizontal or vertical cell containing a list of other
cells running from left-to-right or top-to-bottom, or a leaf cell which is
associated with a pane.

The major functional changes are:

- panes may now be split arbitrarily both horizontally (splitw -h, C-b %) and
  vertically (splitw -v, C-b ");
- panes may be resized both horizontally and vertically (resizep -L/-R/-U/-D,
  bound to C-b left/right/up/down and C-b M-left/right/up/down);
- layouts are now applied and then may be modified by resizing or splitting
  panes, rather than being fixed and reapplied when the window is resized or
  panes are added;
- manual-vertical layout is no longer necessary, and active-only layout is gone
  (but may return in future);
- the main-pane layouts now reduce the size of the main pane to fit all panes
  if possible.

Thanks to all who tested.
2009-07-20 15:42:05 +00:00
Nicholas Marriott
54afcfbfb4 Display the number of failed password attempts (if any) when the server is
locked. From Tom Doherty.
2009-07-20 14:37:51 +00:00
Tiago Cunha
376c808b50 Add three new session options: visual-activity, visual-bell, visual-content.
If these are enabled (and the monitor-activity, bell-action and monitor-content
options are configurated appropriately), when activity, a bell, or content is
detected, a message is shown.

Also tidy up the bell/activity/content code in server.c slightly and fix a
couple of errors.
2009-07-19 14:35:56 +00:00
Nicholas Marriott
6036bdd06c Improved layout code.
Each window now has a tree of layout cells associated with it. In this tree,
each node is either a horizontal or vertical cell containing a list of other
cells running from left-to-right or top-to-bottom, or a leaf cell which is
associated with a pane.

The major functional changes are:

- panes may now be split arbitrarily both horizontally (splitw -h, C-b %) and
  vertically (splitw -v, C-b ");
- panes may be resized both horizontally and vertically (resizep -L/-R/-U/-D,
  bound to C-b left/right/up/down and C-b M-left/right/up/down);
- layouts are now applied and then may be modified by resizing or splitting
  panes, rather than being fixed and reapplied when the window is resized or
  panes are added;
- manual-vertical layout is no longer necessary, and active-only layout is gone
  (but may return in future);
- the main-pane layouts now reduce the size of the main pane to fit all panes
  if possible.

Thanks to all who tested.
2009-07-19 13:21:40 +00:00
Nicholas Marriott
fc6a65c620 Add three new session options: visual-activity, visual-bell, visual-content. If
these are enabled (and the monitor-activity, bell-actio and monitor-content
options are configurated appropriately), when activity, a bell, or content is
detected, a message is shown.

Also tidy up the bell/activity/content code in server.c slightly and fix a
couple of errors.
2009-07-18 14:59:25 +00:00
Nicholas Marriott
19cb1fb592 Make it so using kill-pane to destroy the last pane in a window destroys the
window instead of being an error.
2009-07-18 11:07:14 +00:00
Nicholas Marriott
6bc9ee3420 Tidy up new-session and attach-session and change them to work from inside
tmux, switching the current client to the new or requested session.
2009-07-18 11:06:09 +00:00
Nicholas Marriott
0ca6f667e3 Make it so using kill-pane to destroy the last pane in a window destroys the
window instead of being an error.
2009-07-17 20:37:03 +00:00
Nicholas Marriott
6f5150a943 - New command display-message (alias display) to display a message in the
status line (bound to "i" and displays the current window and time by
  default). The same substitutions are applied as for status-left/right.
- Add support for including the window index (#I), pane index (#P) and window
  name (#W) in the message, and status-left or status-right.
- Bump protocol version.

From Tiago Cunha, thanks!
2009-07-17 18:45:08 +00:00
Tiago Cunha
ae7dda10ce - New command display-message (alias display) to display a message in the
status line (bound to "i" by default).
- Add support for including the window index, pane index, and window name
  in status-left, or status-right.
- Bump protocol version.
2009-07-17 18:32:54 +00:00
Nicholas Marriott
ce53936a2b Tidy up new-session and attach-session and change them to work from inside
tmux, switching the current client to the new or requested session.

Written with Josh Elsasser.
2009-07-17 15:03:11 +00:00
Nicholas Marriott
89543e999d A similar for fix for window_choose: don't rely on the callback always being
called to free data, have a separate free callback and call it from the mode
cleanup code.
2009-07-17 12:12:54 +00:00
Nicholas Marriott
441c118b63 Memory could be leaked if a second prompt or message appeared while another was
still present, so add a separate prompt free callback and make the _clear
function responsible for calling it if necessary (rather than the individual
2009-07-17 09:26:21 +00:00
Nicholas Marriott
216df07688 A similar for fix for window_choose: don't rely on the callback always being
called to free data, have a separate free callback and call it from the mode
cleanup code.
2009-07-17 07:05:58 +00:00
Nicholas Marriott
65deba3a35 Memory could be leaked if a second prompt or message appeared while another was
still present, so add a separate prompt free callback and make the _clear
function responsible for calling it if necessary (rather than the individual
prompt callbacks). Also make both messages and prompts clear any existing when
a new is set.

In addition, the screen could be modified while the prompt is there, restore
the redraw-entire-screen behaviour on prompt clear; add a comment as a
reminder.
2009-07-17 06:13:27 +00:00
Nicholas Marriott
222b8e6743 Make status_message_set a variadic printf-like function. No functional change -
helpful for a couple of things coming soon.
2009-07-15 17:50:11 +00:00
Nicholas Marriott
ff90170738 Having to update NSETOPTION/NSETWINDOWOPTION when adding new options is a bit
annoying and it is only use for iterating, so use a sentinel to mark the end of
each array instead. Different fix for a problem pointed out by Kalle Olavi
Niemitalo.
2009-07-15 17:44:47 +00:00
Nicholas Marriott
6ebb1df8fe Add main-pane-height to the options list (was missed before). 2009-07-15 17:44:25 +00:00
Nicholas Marriott
72d56bd614 Instead of faking up a status line in status_redraw, use the same code to
redraw it as to draw the entire screen, just skip all lines but the last.
2009-07-15 17:43:45 +00:00
Nicholas Marriott
1e574bb70c Get rid of the PANE_HIDDEN flag in favour of a function, and moving the
decision for whether or not a pane should be drawn out of the layout code and
into the redraw code.

This is needed for the new layout design, getting it in now to make that easier
to work on.
2009-07-15 17:42:44 +00:00
Nicholas Marriott
92da443a9e Make status_message_set a variadic printf-like function. No functional change -
helpful for a couple of things coming soon.
2009-07-15 17:39:00 +00:00
Nicholas Marriott
ca617d679f Having to update NSETOPTION/NSETWINDOWOPTION when adding new options is a bit
annoying and it is only use for iterating, so use a sentinel to mark the end of
each array instead. Different fix for a problem pointed out by Kalle Olavi
Niemitalo.
2009-07-15 07:50:34 +00:00
Nicholas Marriott
615d85fb23 Add main-pane-height to the options list (was missed before). 2009-07-14 20:20:04 +00:00
Nicholas Marriott
ae2ea52575 Instead of faking up a status line in status_redraw, use the same code to
redraw it as to draw the entire screen, just skip all lines but the last.

This makes horizontal split redraw properly when the status line is off.
2009-07-14 19:03:16 +00:00
Nicholas Marriott
fe20c0d89e Get rid of the PANE_HIDDEN flag in favour of a function, and moving the
decision for whether or not a pane should be drawn out of the layout code and
into the redraw code.

This is needed for the new layout design, getting it in now to make that easier
to work on.
2009-07-14 07:23:36 +00:00
Nicholas Marriott
097b96ea44 Having fixed flags for single-character getopt options is a bit hard to
maintain and is only going to get worse as more are used. So instead, add a new
uint64_t member to cmd_entry which is a bitmask of upper and lowercase options
accepted by the command.

This means new single character options can be used without the need to add it
explicitly to the list.
2009-07-14 06:43:33 +00:00
Nicholas Marriott
d358a352c0 Tidy up and improve target (-t) argument parsing:
- move the code back into cmd.c and merge with the existing functions where
  possible;
- accept "-tttyp0" as well as "-t/dev/ttyp0" for clients;
- when looking up session names, try an exact match first, and if that fails
  look for it as an fnmatch pattern and then as the start of a name - if more
  that one session matches an error is given; so if there is one session called
  "mysession", -tmysession, -tmysess, -tmysess* are equivalent but if there
  is also "mysession2", the last two are errors;
- similarly for windows, if the argument is not a valid index or exact window
  name match, try it against the window names as an fnmatch pattern and a
  prefix.
2009-07-14 06:42:06 +00:00
Nicholas Marriott
e63567d51c Support "alternate screen" mode (terminfo smcup/rmcup) typically used by full
screen interactive programs to preserve the screen contents. When activated, it
saves a copy of the visible grid and disables scrolling into and resizing out
of the history; when deactivated the visible data is restored and the history
reenabled.
2009-07-14 06:40:33 +00:00
Nicholas Marriott
f41ef2198b Missed this declaration in key bindings change. Whoops. 2009-07-14 06:40:03 +00:00
Nicholas Marriott
5ef5bd7c31 Add a "back to indentation" key in copy mode to move the cursor to the first
non-whitespace character. ^ with vi and M-m with emacs key bindings. Another
from Kalle Olavi Niemitalo, thanks.
2009-07-14 06:39:25 +00:00
Nicholas Marriott
d2c3dbc665 If it exist, load a system-wide configuration file /etc/tmux.conf before any
user-specified one.
2009-07-14 06:38:14 +00:00
Nicholas Marriott
5f108d9df6 Having fixed flags for single-character getopt options is a bit hard to
maintain and is only going to get worse as more are used. So instead, add a new
uint64_t member to cmd_entry which is a bitmask of upper and lowercase options
accepted by the command.

This means new single character options can be used without the need to add it
explicitly to the list.
2009-07-13 23:11:35 +00:00
Nicholas Marriott
023d8d38ec Tidy up and improve target (-t) argument parsing:
- move the code back into cmd.c and merge with the existing functions where
  possible;
- accept "-tttyp0" as well as "-t/dev/ttyp0" for clients;
- when looking up session names, try an exact match first, and if that fails
  look for it as an fnmatch pattern and then as the start of a name - if more
  that one session matches an error is given; so if there is one session called
  "mysession", -tmysession, -tmysess, -tmysess* are equivalent but if there
  is also "mysession2", the last two are errors;
- similarly for windows, if the argument is not a valid index or exact window
  name match, try it against the window names as an fnmatch pattern and a
  prefix.
2009-07-13 17:47:46 +00:00
Nicholas Marriott
359285928b Support "alternate screen" mode (terminfo smcup/rmcup) typically used by full
screen interactive programs to preserve the screen contents. When activated, it
saves a copy of the visible grid and disables scrolling into and resizing out
of the history; when deactivated the visible data is restored and the history
reenabled.
2009-07-13 10:43:52 +00:00
Nicholas Marriott
0b788a3d61 Missed this declaration in key bindings change. Whoops. 2009-07-12 23:46:49 +00:00
Nicholas Marriott
27fc963631 When pasting, translate \n into \r. This matches xterm and putty's behaviour,
and makes emacs happy when pasting into some modes. A new -r (raw) flag to
paste-buffer pastes without the translation.

From Kalle Olavi Niemitalo, thanks!
2009-07-12 17:11:39 +00:00
Nicholas Marriott
d7b4aa0ff3 Add a default-terminal option to set the starting value of $TERM in new
windows.
2009-07-12 17:07:58 +00:00
Nicholas Marriott
22d51ec1ea Add a "back to indentation" key in copy mode to move the cursor to the first
non-whitespace character. ^ with vi and M-m with emacs key bindings. Another
from Kalle Olavi Niemitalo, thanks.
2009-07-12 16:15:34 +00:00
Nicholas Marriott
22355ce947 If it exist, load a system-wide configuration file /etc/tmux.conf before any
user-specified one.
2009-07-12 16:07:56 +00:00
Nicholas Marriott
2f7198246e When pasting, translate \n into \r. This matches xterm and putty's behaviour,
and makes emacs happy when pasting into some modes. A new -r (raw) flag to
paste-buffer pastes without the translation.

From Kalle Olavi Niemitalo, thanks!
2009-07-11 19:14:56 +00:00
Nicholas Marriott
daa1faa905 Add a default-terminal option to set the starting value of $TERM in new
windows.

This is "screen" by default and must be either that or something closely
related. This does makes it easier to customise it if necessary.
2009-07-10 05:50:54 +00:00
Nicholas Marriott
eee3dd297e New command, if-shell (alias if). Executes the tmux command in the second
argument if the shell command in the first succeeds, for example:

       if "[ -e ~/.tmux.conf.alt ]" "source .tmux.conf.alt"

Written by Tiago Cunha, many thanks.
2009-07-09 18:14:18 +00:00
Nicholas Marriott
e073441c36 Tidy by removing unused argument from grid_view_{insert,delete}_line_region
functions (currently don't fully work, this is to make fix easier).
2009-07-09 18:04:17 +00:00
Nicholas Marriott
81181bfb72 New command, if-shell (alias if). Executes the tmux command in the second
argument if the shell command in the first succeeds, for example:

       if "[ -e ~/.tmux.conf.alt ]" "source .tmux.conf.alt"

Written by Tiago Cunha, many thanks.
2009-07-09 15:47:49 +00:00
Nicholas Marriott
643c219d18 Tidy by removing unused argument from grid_view_{insert,delete}_line_region
functions (currently don't fully work, this is to make fix easier).
2009-07-09 00:29:32 +00:00
Nicholas Marriott
2ddcb51df3 Fix $Id$. 2009-07-08 18:03:03 +00:00
Nicholas Marriott
86504af149 Rename the global options variables to be shorter and to make session options
clear. No functional change, getting this out of the way to make later options
changes easier.
2009-07-08 18:01:31 +00:00
Nicholas Marriott
084d07f4eb Just appending -l to $SHELL to create a login shell is wrong: -l is not POSIX,
and some people may use shells which do not support it. Instead, make an empty
default-command option mean a login shell, and fork it with a - in argv[0]
which is the method used by login(1).

Also fix the automatic-rename code to handle this correctly and to strip a
leading - if present.
2009-07-08 05:26:45 +00:00
Nicholas Marriott
923ccfa2e8 Rename the global options variables to be shorter and to make session options
clear. No functional change, getting this out of the way to make later options
changes easier.
2009-07-07 19:49:19 +00:00
Nicholas Marriott
08c7249636 Change default_window_name to use window_default_command if the actual cmd is
empty. From Josh Elsasser.
2009-07-02 18:17:46 +00:00
Nicholas Marriott
9f0653386b $Id$. 2009-07-01 23:06:32 +00:00
Nicholas Marriott
eed4f7600d Fix $Id$. 2009-06-29 22:04:51 +00:00
Nicholas Marriott
1496aa5dbc Remove some unused function declarations; no binary change. 2009-06-26 22:18:03 +00:00
Nicholas Marriott
b11b1dd1c0 Remove some unused function declarations; no binary change. 2009-06-26 19:44:36 +00:00
Nicholas Marriott
81b4aca934 #ifndef nitems. 2009-06-26 15:31:15 +00:00
Nicholas Marriott
e225ce0fd7 #ifndef nitems to avoid redefining it if it is already in a header. 2009-06-25 22:08:15 +00:00
Nicholas Marriott
802e129fd7 Start of portability update: bitstring.h. 2009-06-25 17:02:59 +00:00
Nicholas Marriott
a9e3d5c56a More diff-to-OpenBSD reduction. Move a lot of compat stuff into compat.h. 2009-06-25 16:47:00 +00:00
Nicholas Marriott
bb459beb03 Whitespace and more syncing. 2009-06-25 16:34:50 +00:00
Nicholas Marriott
6cde05147e No more xmalloc-debug. 2009-06-25 16:25:15 +00:00
Nicholas Marriott
a5830b9603 Restore $Id$ and add script to do so. 2009-06-25 16:21:32 +00:00
Nicholas Marriott
1b9ac18565 tmux doesn't and won't need syslog logging, so remove it and some other unused
functions found by lint.
2009-06-25 16:09:25 +00:00
Nicholas Marriott
582660bdf3 Miscellaneous unused functions, including one which was basically a
duplicate. Found by lint.
2009-06-25 16:09:11 +00:00
Nicholas Marriott
62822b1848 Nuke unused buffer functions. Found by lint.
Also remove some old debug output which was #if 0.
2009-06-25 16:07:00 +00:00
Nicholas Marriott
f7a9eb46fc Change find-window and monitor-content to use fnmatch(3). For convenience and
compatibility, *s are implicitly added at the start and end of the pattern.
2009-06-25 16:04:24 +00:00
Nicholas Marriott
853ad68162 Add a dedicated function to convert a line into a string and use it to simplify the search window function. 2009-06-25 16:02:37 +00:00
Nicholas Marriott
942ea4267d Trying to predict the cursor position for UTF-8 output in the same way as for
normal eight-bit output is wrong, separate it into a different function. Fixes
spacing when mixing UTF-8 with some escape sequences, notably the way w3m does
it.
2009-06-25 16:01:26 +00:00
Nicholas Marriott
245685433e Constify utf8_width() function argument. 2009-06-25 16:00:50 +00:00
Nicholas Marriott
1b245388b5 Proper support for tab stops (\033H etc), using a bitstring(3). Makes another
vttest test happy.
2009-06-25 15:54:38 +00:00
Nicholas Marriott
93631b3ca7 Implement the DEC alignment test. With the last change this is enough for the
first cursor test in vttest (in ports) to pass; it still shops a few more
problems though.
2009-06-25 15:51:54 +00:00
Nicholas Marriott
28bcf774e5 New session option, status-utf8, to control the interpretation of top-bit-set
characters in status-left and status-right (if on, they are treated as UTF-8;
otherwise passed through).
2009-06-25 15:48:25 +00:00
Nicholas Marriott
1e06ec41dc Add a UTF-8 aware string length function and make UTF-8 in
status-left/status-right work properly. At the moment any top-bit-set
characters are assumed to be UTF-8: a status-utf8 option to configure this will
come shortly.
2009-06-25 15:47:07 +00:00
Nicholas Marriott
0828e06ad7 Nuke unused pane flag. 2009-06-25 15:46:09 +00:00
Nicholas Marriott
a7075f1c66 tmux doesn't and won't need syslog logging, so remove it and some other unused
functions found by lint.

Also move a couple of internal function declarations into file scope.
2009-06-25 06:23:10 +00:00
Nicholas Marriott
1675ddb4d1 Miscellaneous unused functions, including one which was basically a
duplicate. Found by lint.
2009-06-25 06:15:04 +00:00
Nicholas Marriott
ed8350422e Nuke unused buffer functions. Found by lint.
Also remove some old debug output which was #if 0.
2009-06-25 06:05:47 +00:00
Nicholas Marriott
7e796dea03 Change find-window and monitor-content to use fnmatch(3). For convenience and
compatibility, *s are implicitly added at the start and end of the pattern.

Also display the line number and the entire line in the results, and lose the
nasty section_string function and the now empty util.c file.

Initially from Tiago Cunha.
2009-06-24 22:49:56 +00:00
Nicholas Marriott
096cbf2ea5 Add a dedicated function to convert a line into a string and use it to simplify the search window function. 2009-06-24 22:04:18 +00:00
Nicholas Marriott
2de599ac0e Trying to predict the cursor position for UTF-8 output in the same way as for
normal eight-bit output is wrong, separate it into a different function. Fixes
spacing when mixing UTF-8 with some escape sequences, notably the way w3m does
it.
2009-06-24 16:01:02 +00:00
Nicholas Marriott
27cfa81110 Constify utf8_width() function argument. 2009-06-24 05:35:07 +00:00
Nicholas Marriott
d42fb43f4f Proper support for tab stops (\033H etc), using a bitstring(3). Makes another
vttest test happy.
2009-06-04 18:48:24 +00:00
Nicholas Marriott
52ec9b9ec4 Implement the DEC alignment test. With the last change this is enough for the
first cursor test in vttest (in ports) to pass; it still shops a few more
problems though.
2009-06-03 23:30:40 +00:00
Nicholas Marriott
6521427a45 New session option, status-utf8, to control the interpretation of top-bit-set
characters in status-left and status-right (if on, they are treated as UTF-8;
otherwise passed through).
2009-06-03 16:54:26 +00:00
Nicholas Marriott
7d45e29683 Add a UTF-8 aware string length function and make UTF-8 in
status-left/status-right work properly. At the moment any top-bit-set
characters are assumed to be UTF-8: a status-utf8 option to configure this will
come shortly.
2009-06-03 16:05:46 +00:00
Nicholas Marriott
c5dbec9e85 When swapping pane positions, swap the PANE_HIDDEN flag as well, otherwise tmux
crashes when trying to find the new active pane.

While here, nuke an unused pane flag.

Fixes PR 6160, reported by and a slightly different version of diff tested by
ralf.horstmann at gmx.de.
2009-06-03 07:51:24 +00:00
Nicholas Marriott
35876eaab9 Import tmux, a terminal multiplexor allowing (among other things) a single
terminal to be switched between several different windows and programs
displayed on one terminal be detached from one terminal and moved to another.

ok deraadt pirofti
2009-06-01 22:58:49 +00:00
Nicholas Marriott
3a55871d04 Now in base. 2009-05-26 18:31:10 +00:00
Nicholas Marriott
6c442c19ba UPPER -> BIG, sort, and bump protocol version. 2009-05-21 19:46:00 +00:00
Nicholas Marriott
6db7bd6791 Try to guess if the window is UTF-8 by outputting a three-byte UTF-8 wide character and seeing how much the cursor moves. Currently tries to figure out if this works by some stupid checks on the terminal, these need to be rethought. Also might be better using a width 1 character rather than width 2. 2009-05-19 16:08:35 +00:00
Tiago Cunha
80af85a102 - New window option monitor-content to search for a string in a window, and
highlight the status line if it matches.
- To make this possible, the function cmd_find_window_search from
  cmd-find-window.c had to be moved to window.c and renamed window_pane_search.
- While there use three new functions in server.c to check for bell, activity,
  and content, to avoid too much nesting.
2009-05-19 13:32:55 +00:00
Nicholas Marriott
6e4b947d71 New option main-pane-width to set width of pane in left-vertical mode. 2009-05-18 21:55:53 +00:00
Nicholas Marriott
404411f5e7 horizontal -> h, vertical -> v, to shorten some function names a little. 2009-05-18 21:29:11 +00:00
Nicholas Marriott
d601c42ea2 Behave properly when resize not supported. 2009-05-18 21:16:09 +00:00
Nicholas Marriott
5518b6138d manual -> manual-vertical. 2009-05-18 21:06:16 +00:00
Nicholas Marriott
ab4e5e8574 Clean up manual layout code:
- change the one layout function into two _refresh and _resize
- create layout-manual.c for manual layout code
- move the fit panes/update panes code from window.c to the new file as it is only used by manual layout now
- move the resize pane code into layout-manual.c as well
- get rid of the direct calls to fit/update and make them go through layout
- rename a couple of variables

This is mainly as a first step before reworking the manual layout code to see if anything breaks.
2009-05-18 21:01:38 +00:00
Nicholas Marriott
1001902143 select-layout command and some key bindings. 2009-05-16 11:48:47 +00:00
Nicholas Marriott
03af7c99b5 Recreate server socket on SIGUSR1, per SF feature request 2792533. 2009-05-16 10:02:51 +00:00
Nicholas Marriott
cba338ac13 Keys in status line (p in vi mode, M-y in emacs) to paste the first line of the upper paste buffer. Suggested by Dan Colish. 2009-05-14 19:36:56 +00:00
Nicholas Marriott
96ca072482 clear-history command. 2009-05-14 16:56:23 +00:00
Nicholas Marriott
c8cf438d44 Rename all feature flags to HAVE_* and move out of makefiles into a configure
script which must be run before building.

Still two makefiles but they are a hell of a lot simpler.

HAVE_* also will make it easier to move to $buildsystem if necessary later.
2009-05-13 23:27:00 +00:00
Nicholas Marriott
792aeb926e Use getopt.c from openssh rather than OpenBSD's getopt_long. 2009-05-13 22:20:48 +00:00
Nicholas Marriott
143aa718e5 Space trimmage mega-diff. 2009-05-04 17:58:27 +00:00
Nicholas Marriott
fb543c7707 Use ACS for line drawing characters. 2009-05-04 13:20:02 +00:00
Nicholas Marriott
9164dd63e7 Only worry about complete seconds for status line update. Also reduce poll interval and de-magic-number it. 2009-05-02 08:34:39 +00:00
Nicholas Marriott
044e6f7660 previous-layout command. 2009-04-30 21:17:06 +00:00
Nicholas Marriott
a6f2d82335 Use a (pre)randomised binary tree for UTF-8 character widths. Probably overkill
but meh.
2009-04-30 20:54:53 +00:00
Nicholas Marriott
a583bbb730 Display the layout name in window lists. 2009-04-30 16:27:29 +00:00
Nicholas Marriott
cdf472f2de Merge resize-pane-{up,down} into resize-pane. 2009-04-30 06:01:24 +00:00
Nicholas Marriott
cc9cc1aea8 Some tweaks for Solaris.
Get rid of vis.* in favour of a small replacement function.
2009-04-29 22:25:20 +00:00
Nicholas Marriott
f0a716f484 Use a u_char so top-bit-set update the cursor as well. 2009-04-29 17:50:52 +00:00
Nicholas Marriott
5d1b6888dc Convert hidden flag to a full flags word for the status line and add a flag to
accept after only one key. Use this so don't need to press enter after y/n for
confirm-before.
2009-04-27 17:27:36 +00:00
Nicholas Marriott
d8a35ffa50 Perform some black and midnight cpp witchcraft to get rid of GRID_DEBUG, to fix
building with -DDEBUG on gcc2 platforms. From joshe.
2009-04-27 14:51:59 +00:00
Tiago Cunha
058772e4e6 - confirm-before command.
- Bound "&" and "x" by default to confirm-before "kill-window" and
  confirm-before "kill-pane", respectively.
2009-04-27 13:21:16 +00:00
Nicholas Marriott
5fbdca890a Use the xenl terminfo flag to detect early-wrap terminals like the FreeBSD
console. Many thanks for a very informative email from Christian Weisgerber.
2009-04-23 21:09:17 +00:00
Nicholas Marriott
325d43e417 rotate-window command. 2009-04-03 17:21:46 +00:00
Nicholas Marriott
8216f7b3d9 swap-pane command. 2009-04-02 23:28:16 +00:00
Nicholas Marriott
dbf52facd2 Change scroll/pane redraws to only redraw the single pane affected rather than
the entire window.
2009-04-02 21:08:15 +00:00
Nicholas Marriott
84cde92c8f If redrawing the region would mean redrawing > half the pane, just schedule to
redraw the entire window. Also add a flag to skip updating the window any
further if it is scheduled to be redrawn. This has the effect of batching
multiple redraws together.
2009-04-02 20:30:23 +00:00
Nicholas Marriott
91bc6836f7 - Allow switching to hidden windows (for active-only layout).
- Don't update unnecessarily for other layouts when changing active pane doesn't matter.
2009-04-01 21:10:08 +00:00
Nicholas Marriott
b6450b167b Basic horizontal splitting and layout management. Still some redraw and other
issues - particularly, don't mix with manual pane resizing and be careful when
viewing from multiple clients; generally cycling the layout a few times will
fix most problems. Getting this in for testing while I think about how to deal
with manual mode.

Split window as normal and cycle the layouts with C-b space. Some of the
layouts will work better when swap-pane comes along.
2009-04-01 18:21:42 +00:00
Nicholas Marriott
d13add828a More AIX tweaks. 2009-03-31 22:08:45 +00:00
Nicholas Marriott
23fef99009 8 -> UTF8_SIZE. 2009-03-29 11:18:28 +00:00
Nicholas Marriott
cf7b384c43 Better UTF-8 support, including combined characters. Unicode data is now stored
as UTF-8 in a separate array, the code does a lookup into this every time it
gets to a UTF-8 cell. Zero width characters are just appended onto the UTF-8
data for the previous cell. This also means that almost no bytes extra are
wasted non-Unicode data (yay).

Still some oddities, such as copy mode skips over wide characters in a strange
way, and the code could do with some tidying.
2009-03-28 20:17:29 +00:00
Nicholas Marriott
34dd72f008 _fill functions are no longer needed. Nuke them. 2009-03-28 16:57:03 +00:00
Nicholas Marriott
abf170d6d0 Whoops. Missed a few changes. 2009-03-28 16:55:46 +00:00
Nicholas Marriott
6c0728fe07 Step 2 of the Grand Plan To Make UTF-8 Better.
Split grid into two arrays, one containing grid attributes/flags/colours (keeps
the name grid_cell for now) and a separate with the character data (called
text). The text is stored as a u_short but is treated as a uint64_t elsewhere;
eventually the grid will have two arrays.

I'm not happy with the naming so that might change.

Still need to decide where to go from here. I'm not sure whether to combine
the peek/set functions together, and also whether to continue to treat the
text as a uint64_t (and convert to/from Unicode) or make it a char array
(of size one when UTF-8 disabled, eight when enabled) and keep everything
as UTF-8.

Also since UTF-8 will eventually become an attribute of the grid itself it
might be nice to move all the padding crap into grid.c.
2009-03-28 16:30:05 +00:00
Nicholas Marriott
989d67ccd7 struct grid_data -> struct grid. Stage 1 of the Grand Plan To Make UTF-8 Better. 2009-03-28 15:43:41 +00:00
Nicholas Marriott
cb2ac5c269 Key repeating is now a property of the key binding not of the command. Repeat
is turned on when the key is bound with the -r flag to bind-key. next/previous-
window no longer repeat by default as it turned out to annoy me.
2009-03-28 14:08:09 +00:00
Nicholas Marriott
587badecdb Clear using ED when redrawing the screen. I foolishly assumed using spaces
would be equivalent and terminals would pick up on this, but apparently
not. This fixes copy and paste in xterm/rxvt.
2009-03-28 10:15:01 +00:00
Nicholas Marriott
a7f57773b7 Not const. 2009-03-27 17:04:04 +00:00
Nicholas Marriott
f6001f9ffc Whoops. Didn't mean to commit this yet. 2009-03-27 16:44:51 +00:00
Nicholas Marriott
b97264bb70 Update TODO. 2009-03-27 16:44:00 +00:00
Nicholas Marriott
be0c79f3ad Sockets in /tmp are now created in a subdirectory named, tmux-UID, eg
tmux-1000. The default socket is thus /tmp/tmux-UID/default. To start a
separate server, the new -L command line option should be used: this creates a
socket in the same directory with a different name ("-L main" will create
socket called "main"). -S should only be used to place the socket outside
/tmp. This makes sockets a little more secure and a bit more convenient to use
multiple servers.
2009-03-27 15:57:10 +00:00
Nicholas Marriott
f5f04a9344 * New session flag "set-remain-on-exit" to set remain-on-exit flag for new windows created in that session (like "remain-by-default" used to do). Not perfectly happy about this, but until I can think of a good way to introduce it generically (maybe a set of options in the session) this will do. Fixes SF request 2527847. 2009-03-21 12:44:06 +00:00
Nicholas Marriott
e6d35b6aa4 Support for 88 colour terminals. 2009-03-07 10:29:06 +00:00
Nicholas Marriott
56f80a5b09 break-pane command to split a pane off into a new window; bound to ! by default. 2009-03-07 09:29:54 +00:00
Nicholas Marriott
65b9aeb337 Put socket path in $TMUX. 2009-03-04 17:24:07 +00:00
Nicholas Marriott
171256057e Extra function keys from Dashing dashing at hushmail dot com 2009-03-02 18:05:40 +00:00
Nicholas Marriott
57f5f44d0f Sort out escape key handling so it works. 2009-03-02 16:55:23 +00:00
Nicholas Marriott
afd67ce89f Allow selection in vi mode. 2009-02-21 17:46:13 +00:00
Nicholas Marriott
95c8c049f5 Redo mode keys slightly more cleanly and apply them to command prompt editing. vi or emacs mode is controlled by the session option status-keys. 2009-02-13 21:39:45 +00:00
Nicholas Marriott
0450b4a5d4 Move status prompt/message init and teardown into status.c. 2009-02-13 18:57:55 +00:00
Nicholas Marriott
cce03e138b Looking up argv[0] is expensive, so just use p_comm for the window name which is good enough. Also increase name update time to 500 ms. 2009-02-13 00:43:04 +00:00
Nicholas Marriott
959eeef505 FreeBSD's console wraps lines at $COLUMNS - 1 rather than $COLUMNS (the cursor can never be beyond $COLUMNS - 1) and does not appear to support changing this behaviour, or any of the obvious possibilities (turning off right margin wrapping, insert mode). This is irritating, most notably because it impossible to write to the very bottom-right of the screen without scrolling. To work around this, if built on FreeBSD and run with a "cons" $TERM, the bottom-right cell on the screen is omitted. 2009-02-11 23:16:45 +00:00
Nicholas Marriott
6c76aaca92 Lose unnecessary cursor restores, fix a couple of placement bugs and remove unused CR. 2009-02-11 18:44:08 +00:00
Nicholas Marriott
03d531ebc6 Move sx,sy into tty rather than client. 2009-02-11 17:50:36 +00:00
Nicholas Marriott
514fe11727 We are going to need the updated screen data for emulating the scroll region,
which may involve changing the cursor position; however, the old (before
redraw) cursor position is necessary for writing to the tty. So, save it before
doing the redraw then update the internal screen then update the tty.

Not sure I like this solution but it does the job for now.
2009-02-11 17:04:39 +00:00
Nicholas Marriott
91c9d95279 Change tty_cmd_* to use a window_pane. 2009-02-11 07:02:34 +00:00
Nicholas Marriott
e444b0b92a Split most of tty_cmd_cell off to tty_cell. First step on making tty_cmd_* take
a window_pane for later use emulating scroll region.
2009-02-11 06:50:16 +00:00
Nicholas Marriott
c6be7d3ee6 Simplify screen/tty write code to eliminate function pointer which is now
unnecessary (it always does the same thing).
2009-02-11 06:31:09 +00:00
Nicholas Marriott
b37399304f Don't redraw status line unless it has actually changed. Stops extraneous
updates between clock/#() changes and doesn't require manual status-interval 0
when no updates are occuring.
2009-02-10 00:18:06 +00:00
Nicholas Marriott
c9cfc9a9f3 Don't try to change the window name unless the pid of the process chosen has
changed. Reduces CPU use.

osdep-* stuff is a bit horrible now but there we go :-/.
2009-02-09 18:08:01 +00:00
Nicholas Marriott
9d90d9ad70 Increase name refresh interval to 250 ms to reduce CPU use. 2009-02-09 16:11:26 +00:00
Nicholas Marriott
62d2ab3e68 Continue process if suspended. 2009-02-08 16:11:26 +00:00
Tiago Cunha
4213ff8faa copy-buffer command. 2009-02-03 17:21:19 +00:00
Nicholas Marriott
882316ad6a Set colour of window entry in status line based on window options. 2009-01-30 00:24:49 +00:00
Nicholas Marriott
2bf9f4973b Undo this and just shut lint up. 2009-01-29 19:26:53 +00:00
Nicholas Marriott
6ad0d2ab4a Nuke debugging. 2009-01-29 19:24:34 +00:00
Nicholas Marriott
4428987e95 * Better support for at least the most common variant of mouse input: parse it and adjust for different panes. Also support mouse in window/session choice mode.
* Bring back the fancy window titles with session/window names: it is easy to work around problems with elinks (see FAQ).
2009-01-28 19:52:21 +00:00
Nicholas Marriott
2af52440ba -u to start with screen scrolled up. 2009-01-27 23:35:44 +00:00
Nicholas Marriott
c1726281c9 Handle cursor on/off better. 2009-01-27 21:39:15 +00:00
Nicholas Marriott
c6bd9e2063 Allow status, mode and message attributes to be changed by three new options: status-attr, mode-attr, message-attr. A comma-separataed list is accepted containing: bright, dim, underscore, blink, reverse, hidden, italics, for example: set -g status-attr bright,blink
From Josh Elsasser, thanks!
2009-01-27 20:22:33 +00:00
Nicholas Marriott
9cde0c2477 Be more clever about picking window name. 2009-01-26 22:57:20 +00:00
Tiago Cunha
f62ed6aaa3 load-buffer command 2009-01-25 19:00:10 +00:00
Tiago Cunha
d60ad6f483 Make the caller responsible for allocating memory for the paste buffer data
(needed by the load-buffer command when dealing with big files since it'll
prevent tmux from dying due to memory exhaustion). From nicm.
2009-01-25 18:51:28 +00:00
Nicholas Marriott
4d9af27b0b Better error messages for fork. 2009-01-23 16:59:14 +00:00
Nicholas Marriott
392e135349 Handle SIGTERM (and kill-server which uses it), a bit more neatly - tidy up
properly and print a nicer message. Same effect though :-)
2009-01-21 22:47:31 +00:00
Nicholas Marriott
19987feaaa Bring back -p and -l to splitw to specify height as % or nlines. 2009-01-21 19:38:51 +00:00
Nicholas Marriott
2d15f59859 Try to change the window title to match the command running it in. This is done
by reading argv[0] from the process group leader of the group that owns the tty
(tcgetpgrp()). This can't be done portably so some OS-dependent code is
introduced (ugh); OpenBSD, FreeBSD and Linux are supported at the moment.

A new window flag, automatic-rename, is available: if this is set to off, the
window name is not changed. Specifying a name with the new-window, new-session
or rename-window commands will automatically set this flag to off for the
window in question. To disable it entirely set the option to off globally (setw
-g automatic-rename off).
2009-01-20 19:35:03 +00:00
Nicholas Marriott
5e55b28d81 Bump protocol. 2009-01-19 18:26:50 +00:00
Nicholas Marriott
93230a64bc Pass return code from _exec; allow command sequences to work from the command line. 2009-01-19 18:23:40 +00:00
Nicholas Marriott
5f6a351df7 Start the first client with a special socketpair so it is already known to the
server rather than playing silly games to get them synchronised before doing
anything.

Change attach-session to start the server.
2009-01-19 17:16:09 +00:00
Nicholas Marriott
4cdc228353 Unbreak UTF-8. 2009-01-18 21:46:30 +00:00