Commit Graph

81 Commits

Author SHA1 Message Date
nicm
577c0e3e5a Use __unused rather than rolling our own. 2015-11-18 14:27:44 +00:00
Nicholas Marriott
cb018a4212 No paths.h on Solaris. 2015-02-06 23:24:44 +00:00
nicm
03758a50dc Add format_expand_time and use it instead of status_replace where
command execution is not needed.
2015-02-06 17:11:39 +00:00
nicm
c9642ee213 Remove two unused arguments from status_replace. 2015-02-01 23:43:23 +00:00
nicm
45dfc5a074 Instead of setting up the default keys by building the key struct
directly with a helper function in the cmd_entry, include a table of
bind-key commands and pass them through the command parser and a
temporary cmd_q.

As well as being smaller, this will allow default bindings to be command
sequences which will probably be needed soon.
2014-10-20 22:29:25 +00:00
nicm
d45c12b6c9 Remove the barely-used and unnecessary command check() function. 2013-10-10 12:00:18 +00:00
Nicholas Marriott
20636d956d Add a command queue to standardize and simplify commands that call other
commands and allow a command to block execution of subsequent
commands. This allows run-shell and if-shell to be synchronous which has
been much requested.

Each client has a default command queue and commands are consumed one at
a time from it. A command may suspend execution from the queue by
returning CMD_RETURN_WAIT and then resume it by calling cmd_continue() -
for example run-shell does this from the callback that is fired after
the job is freed.

When the command queue becomes empty, command clients are automatically
exited (unless attaching). A callback is also fired - this is used for
nested commands in, for example, if-shell which can block execution of
the client's cmdq until a new cmdq becomes empty.

Also merge all the old error/info/print functions together and lose the
old curclient/cmdclient distinction - a cmdq is bound to one client (or
none if in the configuration file), this is a command client if
c->session is NULL otherwise an attached client.
2013-03-24 09:54:10 +00:00
Nicholas Marriott
bb8457b166 Fix error reporting for client commands by adding a flag to
cmd_find_client to tell it whether or not to show errors, sometimes it's
needed and sometimes not.
2013-03-24 09:27:19 +00:00
Nicholas Marriott
8d59b189cc No more lint means no more ARGSUSED. 2013-03-22 10:31:22 +00:00
Nicholas Marriott
ede8312d59 Make command exec functions return an enum rather than -1/0/1 values and
add a new value to mean "leave client running but don't attach" to fix
problems with using some commands in a command sequence. Most of the
work by Thomas Adam, problem reported by "jspenguin" on SF bug 3535531.
2012-07-11 07:10:15 +00:00
Nicholas Marriott
0ff42d975b Missing -o on usage for pipe-pane, from Tiago Cunha. 2011-10-27 22:41:03 +00:00
Nicholas Marriott
be179f6d7e Do not require a client here, or pipe-pane will not work from the
command line.
2011-07-30 17:52:32 +00:00
Nicholas Marriott
d88c20e718 Change -t on display-message to be target-pane for the #[A-Z]
replacements and add -c as target-client.
2011-03-29 19:30:16 +00:00
Nicholas Marriott
69cb1f830e Move all calls to fcntl(...O_NONBLOCK) into a function and clear the
flag on the stdio file descriptors before closing them (fixes things
like "tmux ls && cat").
2011-01-08 01:52:36 +00:00
Nicholas Marriott
7502cb3adb Clean up and simplify tmux command argument parsing.
Originally, tmux commands were parsed in the client process into a
struct with the command data which was then serialised and sent to the
server to be executed. The parsing was later moved into the server (an
argv was sent from the client), but the parse step and intermediate
struct was kept.

This change removes that struct and the separate parse step. Argument
parsing and printing is now common to all commands (in arguments.c) with
each command left with just an optional check function (to validate the
arguments at parse time), the exec function and a function to set up any
key bindings (renamed from the old init function).

This is overall more simple and consistent.

There should be no changes to any commands behaviour or syntax although
as this touches every command please watch for any unexpected changes.
2011-01-04 00:42:46 +00:00
Nicholas Marriott
f56b4ec2ff Trying to set FD_CLOEXEC on every fd is a lost cause, just use
closefrom() before exec.
2010-10-16 08:31:55 +00:00
Nicholas Marriott
e3be9b1951 Do not call event_del() for signals after fork(), just use sigaction()
directly instead - calling libevent functions after fork() w/o
event_reinit() is a bad idea, even if in this case it was harmless.
2010-08-19 18:29:01 +00:00
Nicholas Marriott
278d9bc721 Last change erroneously used the target argument for looking up the
client which caused pipe-pane to fail when used from the command
line. Instead pass NULL which should use the current client.

Spotted by Tiago Cunha.
2010-06-14 23:06:13 +00:00
Nicholas Marriott
ceed5cc9a9 Support the status_replace # replacement sequences in the pipe-pane
command, thanks to Andrea Barisani.
2010-06-05 16:34:30 +00:00
Nicholas Marriott
c4a2fdf15b Put this back in with the initialisation in the right order. 2010-05-04 17:28:16 +00:00
Nicholas Marriott
af5e0bd15a Revert last change, it appears to be broken somehow. 2010-05-04 08:48:06 +00:00
Nicholas Marriott
ec1d37b1b2 Make signal handler setup/teardown two common functions instead of six,
and reset SIGCHLD after fork to fix problems with some shells. From
Romain Francois.
2010-05-03 16:06:32 +00:00
Nicholas Marriott
15a64b805e Massive spaces->tabs and trailing whitespace cleanup, hopefully for the last
time now I've configured emacs to make them displayed in really annoying
colours...
2009-12-03 22:50:09 +00:00
Nicholas Marriott
4ca857e0e9 Remove a couple of unused arguments where possible, and add /* ARGSUSED */ to
the rest to reduce lint output.
2009-11-26 21:37:13 +00:00
Nicholas Marriott
76ef8770cd Get rid of the ugly CMD_CHFLAG macro and use a const string (eg "dDU") in the
command entry structs and a couple of functions to check/set the flags.
2009-11-13 19:53:28 +00:00
Nicholas Marriott
dafa0f022c Unreachable statement, found by lint. 2009-11-13 18:59:14 +00:00
Nicholas Marriott
a02c7e804c Convert the window pane (pty master side) fd over to use a bufferevent.
The evbuffer API is very similar to the existing tmux buffer API so this was
remarkably painless. Not many possible ways to do it, I suppose.
2009-11-04 22:43:11 +00:00
Nicholas Marriott
91ad830c88 Switch window pane pipe redirect fd over to a bufferevent. 2009-11-04 22:02:38 +00:00
Nicholas Marriott
abf3a5d50e Initial changes to move tmux to libevent.
This moves the client-side loops are pretty much fully over to event-based only
(tmux.c and client.c) but server-side (server.c and friends) treats libevent as
a sort of clever poll, waking up after every event to run various things.

Moving the server stuff over to bufferevents and timers and so on will come
later.
2009-11-04 20:50:11 +00:00
Nicholas Marriott
9a4855295b Nuke dead store. 2009-10-21 18:12:31 +00:00
Nicholas Marriott
64b5f39656 Add a pipe-pane command to allow a pane to be piped to a shell command, for
example:

	pipe-pane 'cat >~/out'

No arguments stops outputing and closes the pipe; the -o flag toggles a pipe
and on and off (useful for key bindings).

Suggested by espie@.
2009-10-11 10:04:27 +00:00