241fd72f75
Userspace doesn't need to use SUN_LEN(): connect() and bind() must accept
...
sizeof(struct sockaddr_un), so do the simple, portable thing
ok beck@ deraadt@
2015-10-11 00:26:23 +00:00
83157c02d6
Move initial conf load into cfg.c.
2015-09-01 10:01:56 +00:00
dd92b6e83d
Event base does not need to be global.
2015-08-30 22:19:07 +00:00
b9f0571780
We already loop over the windows in server_client_loop, so don't do it
...
again in server_loop just to check names.
2015-08-29 08:54:41 +00:00
b5aaefc727
Move alerts onto events rather than checking every loop.
2015-08-29 08:30:54 +00:00
f957db81d9
Remove unused prototypes.
2015-08-28 13:21:25 +00:00
f6a0f8730e
Per-session timers for locking, and remove the global one-second timer.
2015-08-28 13:12:20 +00:00
675def0396
Remove the lock-server option which is a bit redundant, it isn't that
...
different without it.
2015-08-28 12:31:55 +00:00
6419f66523
Give clock mode its own timer.
2015-08-28 12:25:42 +00:00
75d10058a4
Run status update on a per-client timer at status-interval.
2015-08-28 12:16:28 +00:00
b6618b631b
Move format job cleanup onto its own timer.
2015-08-28 11:38:27 +00:00
92af3766ec
Add an option (history-file) for a file to save/restore command prompt
...
history, from Olof-Joachim Frahm.
2015-07-20 15:50:04 +00:00
641a9cd3f5
Similarly, for sessions use a callback to free rather than checking
...
every loop.
2015-06-05 18:18:32 +00:00
8c93b768e4
Instead of putting dead clients on a list and checking it every loop,
...
use event_once to queue a callback to deal with them. Also dead clients
with references would never actually be freed because the wrap-up
functions (the callback for stdin, or status_prompt_clear) would never
be called. So call them in server_client_lost.
2015-06-05 18:01:12 +00:00
a863834574
Add support for a single "marked pane". There is one marked pane in the
...
server at a time; it may be toggled or cleared with select-pane -m and
-M (the border is highlighted). A new target '~' or '{marked}' specifies
the marked pane to commands and it is the default target for the
swap-pane and join-pane -s flag (this makes them much simpler to use -
mark the source pane and then change to the target pane to run swapp or
joinp).
2015-06-04 11:43:51 +00:00
58b50fb543
Clear signal handlers before event_reinit as apparently it can otherwise
...
cause libevent to go strange.
2015-06-01 09:20:19 +00:00
7e067cb9dc
does not need syslog.h
2015-05-31 23:27:06 +00:00
379400cfa6
Move the jobs output cache into the formats code so that #() work more
...
generally (for example, again working in set-titles-string).
2015-05-27 13:28:04 +00:00
aeedb464a6
Convert clients list into a TAILQ.
2015-04-24 23:17:11 +00:00
8d66f4fba4
Change the windows array into an RB tree and fix some places where we
...
were only looking at the first winlink for a window in a session.
2015-04-22 15:30:11 +00:00
89e80cabd5
window_index is only used in one place (window_destroy) so inline it there.
2015-04-22 15:05:03 +00:00
93b2871cab
Do not die on USR1 if any of the socket parent directories are
...
missing. Reported by Robin Powell.
2015-04-21 22:32:40 +00:00
7a0c94b28a
Add pane_dead_status for exit status of dead panes.
2014-12-09 19:23:35 +00:00
b496b1fe11
Move cfg_causes local into cfg.c and remove struct causelist.
2014-10-27 22:23:47 +00:00
733cea8847
Wake up any clients waiting with the wait-for command when the server
...
exits.
2014-09-01 21:58:41 +00:00
8e4ae12b4d
lockf is entirely useless and it was a mistake to change to it, go back
...
to using flock which actually works sensibly. Also always retry the lock
to fix a potential race, and add some extra logging.
2014-07-21 10:52:48 +00:00
53cbae544f
Now that cmdlists are reference counted, there is no need for two-step
...
deletion via the dead_key_bindings tree. From Keith Amling.
2014-05-14 06:21:19 +00:00
bec6c807cd
There is no longer a need for a paste_stack struct or for global_buffers
...
to be global. Move to paste.c.
2014-04-24 09:14:43 +00:00
a5d4b7f3d9
Some more long lines.
2014-04-17 14:45:49 +00:00
bf35441608
Do not run any command line command from the client which starts the
...
server until after the configuration file completes. This prevents it
racing against run-shell or if-shell in .tmux.conf that run in the
background.
2013-10-20 17:28:43 +00:00
e323101ede
Rename global configuration define.
2013-04-24 10:01:32 +00:00
20636d956d
Add a command queue to standardize and simplify commands that call other
...
commands and allow a command to block execution of subsequent
commands. This allows run-shell and if-shell to be synchronous which has
been much requested.
Each client has a default command queue and commands are consumed one at
a time from it. A command may suspend execution from the queue by
returning CMD_RETURN_WAIT and then resume it by calling cmd_continue() -
for example run-shell does this from the callback that is fired after
the job is freed.
When the command queue becomes empty, command clients are automatically
exited (unless attaching). A callback is also fired - this is used for
nested commands in, for example, if-shell which can block execution of
the client's cmdq until a new cmdq becomes empty.
Also merge all the old error/info/print functions together and lose the
old curclient/cmdclient distinction - a cmdq is bound to one client (or
none if in the configuration file), this is a command client if
c->session is NULL otherwise an attached client.
2013-03-24 09:54:10 +00:00
8d59b189cc
No more lint means no more ARGSUSED.
2013-03-22 10:31:22 +00:00
8378be03d1
Fix argument order in a log statement.
2012-12-06 12:49:13 +00:00
827b311c81
Use a utility function for common code to show errors in config file,
...
from Thomas Adam.
2012-11-19 10:38:06 +00:00
df912e3540
xfree is not particularly helpful, remove it. From Thomas Adam.
2012-07-10 11:53:01 +00:00
6703ca8d26
Stop accepting new clients for 1 second on EMFILE/ENFILE. Based on
...
ongoing fixes to other daemons by Theo.
2012-04-11 06:16:14 +00:00
ac9ebc29a2
Use a lock file and flock() to serialize server start, avoids problems
...
when running a bunch of tmux from cron at the same time. Based on a diff
from Tim Ruehsen.
2012-03-09 09:57:40 +00:00
808502ac3d
Give each pane created in a tmux server a unique id (starting from 0),
...
put it in the TMUX_PANE environment variable and accept it as a
target. Suggested by and with testing and tweaks from Ben Boeckel.
2011-03-27 20:27:26 +00:00
4dfb29fa38
Use LIST_* not SLIST_*.
2011-01-26 00:11:47 +00:00
69cb1f830e
Move all calls to fcntl(...O_NONBLOCK) into a function and clear the
...
flag on the stdio file descriptors before closing them (fixes things
like "tmux ls && cat").
2011-01-08 01:52:36 +00:00
04b32fa734
Don't reset the activity timer for unattached sessions every second,
...
this screws up the choice of most-recently-used. Instead, break the time
update into a little function and do it when the session is attached.
Pointed out by joshe@.
2011-01-01 01:12:09 +00:00
cc42614fa9
Change from a per-session stack of buffers to one global stack which is
...
much more convenient and also simplifies lot of code. This renders
copy-buffer useless and makes buffer-limit now a server option.
By Tiago Cunha.
2010-12-30 23:16:18 +00:00
acf13ce978
Store sessions in an RB tree by name rather than a list, this is tidier
...
and allows them to easily be shown sorted in various lists
(list-sessions/choose-sessions).
Keep a session index which is used in a couple of places internally but
make it an ever-increasing number rather than filling in gaps with new
sessions.
2010-12-21 22:37:59 +00:00
248fb14f08
Merge the before and after attach client code into one in client.c
...
(instead of two in tmux.c and client.c).
2010-10-18 20:00:02 +00:00
f56b4ec2ff
Trying to set FD_CLOEXEC on every fd is a lost cause, just use
...
closefrom() before exec.
2010-10-16 08:31:55 +00:00
9a7cde0c9b
Two new options:
...
- server option "exit-unattached" makes the server exit when no clients
are attached, even if sessions are present;
- session option "destroy-unattached" destroys a session once no clients
are attached to it.
These are useful for preventing tmux remaining in the background where
it is undesirable and when using tmux as a login shell to keep a limit
on new sessions.
2010-09-26 20:43:30 +00:00
66152010a7
Modify the permissions on the socket when adding or removing +x to show
...
attached sessions, rather than replacing them.
2010-09-26 18:51:48 +00:00
e3be9b1951
Do not call event_del() for signals after fork(), just use sigaction()
...
directly instead - calling libevent functions after fork() w/o
event_reinit() is a bad idea, even if in this case it was harmless.
2010-08-19 18:29:01 +00:00
4274a7ec89
switch back to kqueue for now, since (a) kqueue has been fixed to deal
...
with strange devices and (b) since there appears to be a bull in the
poll code in libevent as well...
requested by nicm who is away
2010-08-04 19:46:13 +00:00
guenther