Commit Graph

38 Commits

Author SHA1 Message Date
Nicholas Marriott
0bdbf47ef9 Add a client flag 'active-pane' which stores the active pane in the client and
allows it to be changed independently from the real active pane stored in the
window. This is can be used with session groups which allow an independent
current window (although it would be nice to have a flag for this too and
remove session groups). The client active pane is only really useful
interactively, many things (hooks, window-style, zooming) still use the window
active pane.
2020-05-14 11:18:19 +01:00
nicm
04cdd03525 Also move cmdq_item and cmdq_list into cmd-queue.c (this is to make its
use more clearly defined and preparation for some future work).
2020-04-13 10:59:58 +00:00
nicm
c20eb0c0ae Make struct cmd local to cmd.c and move it out of tmux.h. 2020-04-13 08:26:27 +00:00
nicm
0f243f0388 Add -Z flag to rotate-window, select-pane, swap-pane, switch-client to
preserve zoomed state. GitHub issue 1839.
2019-08-14 09:58:31 +00:00
nicm
5f92f92908 Add a per-pane option set. Pane options inherit from window options (so
there should be no change to existing behaviour) and are set and shown
with set-option -p and show-options -p.

Change remain-on-exit and window-style/window-active-style to be pane
options (some others will be changed later).

This makes select-pane -P and -g unnecessary so no longer document them
(they still work) and no longer document set-window-option and
show-window-options in favour of set-option -w and show-options -w.
2019-06-20 11:59:59 +00:00
nicm
78287e27c8 Break new window and pane creation common code from various commands and
window.c into a separate file spawn.c.
2019-04-17 14:37:48 +00:00
nicm
646995384d Support for windows larger than visible on the attached client. This has
been a limitation for a long time.

There are two new options, window-size and default-size, and a new
command, resize-window. The force-width and force-height options and the
session_width and session_height formats have been removed.

The new window-size option tells tmux how to work out the size of
windows: largest means it picks the size of the largest session,
smallest the smallest session (similar to the old behaviour) and manual
means that it does not automatically resize windows. The default is
currently largest but this may change. aggressive-resize modifies the
choice of session for largest and smallest as it did before.

If a window is in a session attached to a client that is too small, only
part of the window is shown. tmux attempts to keep the cursor visible,
so the part of the window displayed is changed as the cursor moves (with
a small delay, to try and avoid excess redrawing when applications
redraw status lines or similar that are not currently visible). The
offset of the visible portion of the window is shown in status-right.

Drawing windows which are larger than the client is not as efficient as
those which fit, particularly when the cursor moves, so it is
recommended to avoid using this on slow machines or networks (set
window-size to smallest or manual).

The resize-window command can be used to resize a window manually. If it
is used, the window-size option is automatically set to manual for the
window (undo this with "setw -u window-size"). resize-window works in a
similar way to resize-pane (-U -D -L -R -x -y flags) but also has -a and
-A flags. -a sets the window to the size of the smallest client (what it
would be if window-size was smallest) and -A the largest.

For the same behaviour as force-width or force-height, use resize-window
-x or -y, and "setw -u window-size" to revert to automatic sizing..

If the global window-size option is set to manual, the default-size
option is used for new windows. If -x or -y is used with new-session,
that sets the default-size option for the new session.

The maximum size of a window is 10000x10000. But expect applications to
complain and much higher memory use if making a window excessively
big. The minimum size is the size required for the current layout
including borders.

The refresh-client command can be used to pan around a window, -U -D -L
-R moves up, down, left or right and -c returns to automatic cursor
tracking. The position is reset when the current window is changed.
2018-10-18 08:38:01 +00:00
nicm
ee45a8a149 Get rid of the extra layer of flags and cmd_prepare() and just store the
CMD_FIND_* flags in the cmd_entry and call it for the command. Commands
with special requirements call it themselves and update the target for
hooks to use.
2017-04-22 10:22:39 +00:00
nicm
b342bd0b46 Mass rename struct cmd_q to struct cmdq_item and related. 2016-10-16 19:04:05 +00:00
nicm
4289a1ebfa Trying to do hooks generically is way too complicated and unreliable and
confusing, particularly trying to automatically figure out what target
hooks should be using. So simplify it:

- drop before hooks entirely, they don't seem to be very useful;

- commands with special requirements now fire their own after hook (for
  example, if they change session or window, or if they have -t and -s
  and need to choose which one the hook uses as current target);

- commands with no special requirements can have the CMD_AFTERHOOK flag
  added and they will use the -t state.

At the moment new-session, new-window, split-window fire their own hook,
and display-message uses the flag. The remaining commands still need to
be looked at.
2016-10-13 22:48:51 +00:00
nicm
4d9e6ea310 Some improvements and bug fixes for hooks:
- Prepare the state again before the "after" hooks are run, because the
  command may have killed or moved windows.

- Use the hooks list from the newly prepared target, not the old hooks
  list (only matters for new-session really).

- Correctly detect an invalid current state and ignore it in
  cmd_find_target ("killw; swapw").

- Change neww, new, killp, killw, splitw, swapp, swapw to update the
  current state (used if no explicit target is given) to something more
  useful after they have finished. For example, neww changes it to the
  newly created window.

Hooks are still relatively new and primitive so there are likely to be
more changes to come.

Parts based on bug reports from Uwe Werler and Iblis Lin.
2016-10-13 10:01:49 +00:00
nicm
a81685bfac Add static in cmd-* and fix a few other nits. 2016-10-10 21:51:39 +00:00
nicm
e647eeb0c9 Remove unused variables, from Michal Mazurek. 2016-03-01 12:02:54 +00:00
nicm
995af0e2b7 I no longer use my SourceForge address so replace it. 2016-01-19 15:59:12 +00:00
nicm
a3129fd4e8 Instead of combined flags for -c, -s, -t, split into different sets
using an enum and simplify the parsing code.
2015-12-14 00:31:54 +00:00
nicm
ecfeee2e82 Use member names in cmd_entry definitions so I stop getting confused
about the order.
2015-12-13 21:53:57 +00:00
nicm
4a4daf1303 Instead of every command resolving the target (-t or -s) itself, prepare
the state (client, session, winlink, pane) for it it before entering the
command. Each command provides some flags that tell the prepare step
what it is expecting.

This is a requirement for having hooks on commands (for example, if you
hook "select-window -t1:2", the hook command should to operate on window
1:2 not whatever it thinks is the current window), and should allow some
other target improvements.

The old cmd_find_* functions remain for the moment but that layer will
be dropped later.

Joint work with Thomas Adam.
2015-12-13 14:32:38 +00:00
nicm
b87dc608d9 Some style nits and dead assignments. 2015-08-30 15:43:40 +00:00
nicm
a863834574 Add support for a single "marked pane". There is one marked pane in the
server at a time; it may be toggled or cleared with select-pane -m and
-M (the border is highlighted). A new target '~' or '{marked}' specifies
the marked pane to commands and it is the default target for the
swap-pane and join-pane -s flag (this makes them much simpler to use -
mark the source pane and then change to the target pane to run swapp or
joinp).
2015-06-04 11:43:51 +00:00
nicm
45dfc5a074 Instead of setting up the default keys by building the key struct
directly with a helper function in the cmd_entry, include a table of
bind-key commands and pass them through the command parser and a
temporary cmd_q.

As well as being smaller, this will allow default bindings to be command
sequences which will probably be needed soon.
2014-10-20 22:29:25 +00:00
nicm
d45c12b6c9 Remove the barely-used and unnecessary command check() function. 2013-10-10 12:00:18 +00:00
Nicholas Marriott
738e789dbd If -s to swap-pane is not given, use the current pane. 2013-03-28 15:08:12 +00:00
Nicholas Marriott
c71844de63 Add resize-pane -Z to temporary zoom the active pane to occupy the full
window or unzoom (restored to the normal layout) if it already zoomed,
bound to C-b z by default. The pane is unzoomed on pretty much any
excuse whatsoever.

We considered making this a new layout but the requirements are quite
different from layouts so decided it is better as a special case. Each
current layout cell is saved, a temporary one-cell layout generated and
all except the active pane set to NULL.

Prompted by suggestions and scripts from several. Thanks to Aaron Jensen
and Thiago Padilha for testing an earlier version.
2013-03-24 09:57:59 +00:00
Nicholas Marriott
20636d956d Add a command queue to standardize and simplify commands that call other
commands and allow a command to block execution of subsequent
commands. This allows run-shell and if-shell to be synchronous which has
been much requested.

Each client has a default command queue and commands are consumed one at
a time from it. A command may suspend execution from the queue by
returning CMD_RETURN_WAIT and then resume it by calling cmd_continue() -
for example run-shell does this from the callback that is fired after
the job is freed.

When the command queue becomes empty, command clients are automatically
exited (unless attaching). A callback is also fired - this is used for
nested commands in, for example, if-shell which can block execution of
the client's cmdq until a new cmdq becomes empty.

Also merge all the old error/info/print functions together and lose the
old curclient/cmdclient distinction - a cmdq is bound to one client (or
none if in the configuration file), this is a command client if
c->session is NULL otherwise an attached client.
2013-03-24 09:54:10 +00:00
Nicholas Marriott
ede8312d59 Make command exec functions return an enum rather than -1/0/1 values and
add a new value to mean "leave client running but don't attach" to fix
problems with using some commands in a command sequence. Most of the
work by Thomas Adam, problem reported by "jspenguin" on SF bug 3535531.
2012-07-11 07:10:15 +00:00
Nicholas Marriott
583c885d68 Reset last pane on swap-pane across windows, fixes crash noticed by hsim
at gmx.li.
2011-05-08 21:12:52 +00:00
Nicholas Marriott
7502cb3adb Clean up and simplify tmux command argument parsing.
Originally, tmux commands were parsed in the client process into a
struct with the command data which was then serialised and sent to the
server to be executed. The parsing was later moved into the server (an
argv was sent from the client), but the parse step and intermediate
struct was kept.

This change removes that struct and the separate parse step. Argument
parsing and printing is now common to all commands (in arguments.c) with
each command left with just an optional check function (to validate the
arguments at parse time), the exec function and a function to set up any
key bindings (renamed from the old init function).

This is overall more simple and consistent.

There should be no changes to any commands behaviour or syntax although
as this touches every command please watch for any unexpected changes.
2011-01-04 00:42:46 +00:00
Nicholas Marriott
15a64b805e Massive spaces->tabs and trailing whitespace cleanup, hopefully for the last
time now I've configured emacs to make them displayed in really annoying
colours...
2009-12-03 22:50:09 +00:00
Nicholas Marriott
76ef8770cd Get rid of the ugly CMD_CHFLAG macro and use a const string (eg "dDU") in the
command entry structs and a couple of functions to check/set the flags.
2009-11-13 19:53:28 +00:00
Nicholas Marriott
8df3035831 Remove some dead code found by clang. 2009-07-30 17:29:12 +00:00
Nicholas Marriott
071494d8fa Merge pane number into the target specification for pane commands. Instead of
using -p index, a target pane is now addressed with the normal -t window form
but suffixed with a period and a pane index, for example :0.2 or
mysess:mywin.1. An unadorned number such as -t 1 is tried as a pane index in
the current window, if that fails the same rules are followed as for a target
window and the current pane in that window used.

As a side-effect this now means that swap-pane can swap panes between different
windows.

Note that this changes the syntax of the break-pane, clear-history, kill-pane,
resize-pane, select-pane and swap-pane commands.
2009-07-30 13:45:56 +00:00
Nicholas Marriott
34a82e7629 Make all messages sent between the client and server fixed size.
This is the first of two changes to make the protocol more resilient and less
sensitive to other changes in the code, particularly with commands. The client
now packs argv into a buffer and sends it to the server for parsing, rather
than doing it itself and sending the parsed command data.

As a side-effect this also removes a lot of now-unused command marshalling
code.

Mixing a server without this change and a client with or vice versa will cause
tmux to hang or crash, please ensure that tmux is entirely killed before
upgrading.
2009-07-26 12:58:44 +00:00
Nicholas Marriott
ff2cc0e387 Move the offsets as well when swapping panes. 2009-07-20 07:13:31 +00:00
Nicholas Marriott
6036bdd06c Improved layout code.
Each window now has a tree of layout cells associated with it. In this tree,
each node is either a horizontal or vertical cell containing a list of other
cells running from left-to-right or top-to-bottom, or a leaf cell which is
associated with a pane.

The major functional changes are:

- panes may now be split arbitrarily both horizontally (splitw -h, C-b %) and
  vertically (splitw -v, C-b ");
- panes may be resized both horizontally and vertically (resizep -L/-R/-U/-D,
  bound to C-b left/right/up/down and C-b M-left/right/up/down);
- layouts are now applied and then may be modified by resizing or splitting
  panes, rather than being fixed and reapplied when the window is resized or
  panes are added;
- manual-vertical layout is no longer necessary, and active-only layout is gone
  (but may return in future);
- the main-pane layouts now reduce the size of the main pane to fit all panes
  if possible.

Thanks to all who tested.
2009-07-19 13:21:40 +00:00
Nicholas Marriott
fe20c0d89e Get rid of the PANE_HIDDEN flag in favour of a function, and moving the
decision for whether or not a pane should be drawn out of the layout code and
into the redraw code.

This is needed for the new layout design, getting it in now to make that easier
to work on.
2009-07-14 07:23:36 +00:00
Nicholas Marriott
5f108d9df6 Having fixed flags for single-character getopt options is a bit hard to
maintain and is only going to get worse as more are used. So instead, add a new
uint64_t member to cmd_entry which is a bitmask of upper and lowercase options
accepted by the command.

This means new single character options can be used without the need to add it
explicitly to the list.
2009-07-13 23:11:35 +00:00
Nicholas Marriott
c5dbec9e85 When swapping pane positions, swap the PANE_HIDDEN flag as well, otherwise tmux
crashes when trying to find the new active pane.

While here, nuke an unused pane flag.

Fixes PR 6160, reported by and a slightly different version of diff tested by
ralf.horstmann at gmx.de.
2009-06-03 07:51:24 +00:00
Nicholas Marriott
35876eaab9 Import tmux, a terminal multiplexor allowing (among other things) a single
terminal to be switched between several different windows and programs
displayed on one terminal be detached from one terminal and moved to another.

ok deraadt pirofti
2009-06-01 22:58:49 +00:00