there should be no change to existing behaviour) and are set and shown
with set-option -p and show-options -p.
Change remain-on-exit and window-style/window-active-style to be pane
options (some others will be changed later).
This makes select-pane -P and -g unnecessary so no longer document them
(they still work) and no longer document set-window-option and
show-window-options in favour of set-option -w and show-options -w.
multiple commands to be easily bound to one hook. set-hook and
show-hooks remain but they are now variants of set-option and
show-options. show-options now has a -H flag to show hooks (by default
they are not shown).
been a limitation for a long time.
There are two new options, window-size and default-size, and a new
command, resize-window. The force-width and force-height options and the
session_width and session_height formats have been removed.
The new window-size option tells tmux how to work out the size of
windows: largest means it picks the size of the largest session,
smallest the smallest session (similar to the old behaviour) and manual
means that it does not automatically resize windows. The default is
currently largest but this may change. aggressive-resize modifies the
choice of session for largest and smallest as it did before.
If a window is in a session attached to a client that is too small, only
part of the window is shown. tmux attempts to keep the cursor visible,
so the part of the window displayed is changed as the cursor moves (with
a small delay, to try and avoid excess redrawing when applications
redraw status lines or similar that are not currently visible). The
offset of the visible portion of the window is shown in status-right.
Drawing windows which are larger than the client is not as efficient as
those which fit, particularly when the cursor moves, so it is
recommended to avoid using this on slow machines or networks (set
window-size to smallest or manual).
The resize-window command can be used to resize a window manually. If it
is used, the window-size option is automatically set to manual for the
window (undo this with "setw -u window-size"). resize-window works in a
similar way to resize-pane (-U -D -L -R -x -y flags) but also has -a and
-A flags. -a sets the window to the size of the smallest client (what it
would be if window-size was smallest) and -A the largest.
For the same behaviour as force-width or force-height, use resize-window
-x or -y, and "setw -u window-size" to revert to automatic sizing..
If the global window-size option is set to manual, the default-size
option is used for new windows. If -x or -y is used with new-session,
that sets the default-size option for the new session.
The maximum size of a window is 10000x10000. But expect applications to
complain and much higher memory use if making a window excessively
big. The minimum size is the size required for the current layout
including borders.
The refresh-client command can be used to pan around a window, -U -D -L
-R moves up, down, left or right and -c returns to automatic cursor
tracking. The position is reset when the current window is changed.
CMD_FIND_* flags in the cmd_entry and call it for the command. Commands
with special requirements call it themselves and update the target for
hooks to use.
command. This is used for the session, window and pane for all commands
in the command sequence if there is no -t or -s.
However, using it for all commands in the command sequence means that if
the active pane or current session is changed, subsequent commands still
use the previous state. So make commands which explicitly change the
current state (such as neww and selectp) update it themselves for later
commands. Commands which may invalidate the state (like killp) are
already OK because an invalid state will be ignored.
Also fill in the current state for all key bindings rather than just the
mouse, so that any omissions are easier to spot.
if the pane is zoomed, so instead add a new function to just check if
the pane is actually on screen (most commands still want to accept panes
invisible by zoom). Also reject panes outside the window for various
special targets. Problem reported by Sean Haugh.
the state (client, session, winlink, pane) for it it before entering the
command. Each command provides some flags that tell the prepare step
what it is expecting.
This is a requirement for having hooks on commands (for example, if you
hook "select-window -t1:2", the hook command should to operate on window
1:2 not whatever it thinks is the current window), and should allow some
other target improvements.
The old cmd_find_* functions remain for the moment but that layer will
be dropped later.
Joint work with Thomas Adam.
server at a time; it may be toggled or cleared with select-pane -m and
-M (the border is highlighted). A new target '~' or '{marked}' specifies
the marked pane to commands and it is the default target for the
swap-pane and join-pane -s flag (this makes them much simpler to use -
mark the source pane and then change to the target pane to run swapp or
joinp).
directly with a helper function in the cmd_entry, include a table of
bind-key commands and pass them through the command parser and a
temporary cmd_q.
As well as being smaller, this will allow default bindings to be command
sequences which will probably be needed soon.
window or unzoom (restored to the normal layout) if it already zoomed,
bound to C-b z by default. The pane is unzoomed on pretty much any
excuse whatsoever.
We considered making this a new layout but the requirements are quite
different from layouts so decided it is better as a special case. Each
current layout cell is saved, a temporary one-cell layout generated and
all except the active pane set to NULL.
Prompted by suggestions and scripts from several. Thanks to Aaron Jensen
and Thiago Padilha for testing an earlier version.
commands and allow a command to block execution of subsequent
commands. This allows run-shell and if-shell to be synchronous which has
been much requested.
Each client has a default command queue and commands are consumed one at
a time from it. A command may suspend execution from the queue by
returning CMD_RETURN_WAIT and then resume it by calling cmd_continue() -
for example run-shell does this from the callback that is fired after
the job is freed.
When the command queue becomes empty, command clients are automatically
exited (unless attaching). A callback is also fired - this is used for
nested commands in, for example, if-shell which can block execution of
the client's cmdq until a new cmdq becomes empty.
Also merge all the old error/info/print functions together and lose the
old curclient/cmdclient distinction - a cmdq is bound to one client (or
none if in the configuration file), this is a command client if
c->session is NULL otherwise an attached client.
add a new value to mean "leave client running but don't attach" to fix
problems with using some commands in a command sequence. Most of the
work by Thomas Adam, problem reported by "jspenguin" on SF bug 3535531.
Originally, tmux commands were parsed in the client process into a
struct with the command data which was then serialised and sent to the
server to be executed. The parsing was later moved into the server (an
argv was sent from the client), but the parse step and intermediate
struct was kept.
This change removes that struct and the separate parse step. Argument
parsing and printing is now common to all commands (in arguments.c) with
each command left with just an optional check function (to validate the
arguments at parse time), the exec function and a function to set up any
key bindings (renamed from the old init function).
This is overall more simple and consistent.
There should be no changes to any commands behaviour or syntax although
as this touches every command please watch for any unexpected changes.
using -p index, a target pane is now addressed with the normal -t window form
but suffixed with a period and a pane index, for example :0.2 or
mysess:mywin.1. An unadorned number such as -t 1 is tried as a pane index in
the current window, if that fails the same rules are followed as for a target
window and the current pane in that window used.
As a side-effect this now means that swap-pane can swap panes between different
windows.
Note that this changes the syntax of the break-pane, clear-history, kill-pane,
resize-pane, select-pane and swap-pane commands.
This is the first of two changes to make the protocol more resilient and less
sensitive to other changes in the code, particularly with commands. The client
now packs argv into a buffer and sends it to the server for parsing, rather
than doing it itself and sending the parsed command data.
As a side-effect this also removes a lot of now-unused command marshalling
code.
Mixing a server without this change and a client with or vice versa will cause
tmux to hang or crash, please ensure that tmux is entirely killed before
upgrading.
