Commit Graph

180 Commits

Author SHA1 Message Date
nicm
32e510bd70 Remove support for the UTF-8 mouse extension. This was a briefly used,
poor idea that was fairly quickly replaced by SGR mouse input (which is
now widespread). It is impossible to tell the difference between UTF-8
and non-UTF-8 mouse input; since the mouse-utf8 option was removed tmux
has not handled it correctly in any case; and it is ridiculous to have
three different forms of mouse input.
2015-11-23 20:53:09 +00:00
nicm
577c0e3e5a Use __unused rather than rolling our own. 2015-11-18 14:27:44 +00:00
nicm
205d15e82d All these return values from utf8_* are confusing, use an enum. 2015-11-14 11:45:43 +00:00
nicm
64333e3ef8 Be more strict about invalid UTF-8. 2015-11-14 10:56:31 +00:00
nicm
c5689a5a40 Long overdue change to the way we store cells in the grid: now, instead
of storing a full grid_cell with UTF-8 data and everything, store a new
type grid_cell_entry. This can either be the cell itself (for ASCII
cells), or an offset into an extended array (per line) for UTF-8
data.

This avoid a large (8 byte) overhead on non-UTF-8 cells (by far the
majority for most users) without the complexity of the shadow array we
had before. Grid memory without any UTF-8 is about half.

The disadvantage that cells can no longer be modified in place and need
to be copied out of the grid and back but it turned out to be lot less
complicated than I expected.
2015-11-13 08:09:28 +00:00
nicm
e71a915412 Rename overly-long utf8data to ud throughout. 2015-11-12 22:04:37 +00:00
nicm
1b86f520ea Nuke the utf8 and status-utf8 options and make tmux only a UTF-8
terminal. We still support non-UTF-8 terminals outside tmux, but inside
it is always UTF-8 (as when the utf8 and status-utf8 options were on).
2015-11-12 11:09:11 +00:00
nicm
16ee4de5df Remove some extra blank lines. 2015-09-14 13:22:02 +00:00
nicm
cc768d77ec Revert to marking lines as wrapped on newlines, fixes problems with
capturep -J.
2015-07-13 13:28:50 +00:00
nicm
8f1302282b Two improvements to reflow from Balazs Kezes:
- Don't extend the line to full width on insert/delete character which
  means leaves extra spaces when reflowing.

- Only mark a line wrapped when the cursor actually goes off the end,
  not on newlines which can be used for positioning.
2014-11-08 12:58:31 +00:00
nicm
0a1a88d63c Better format for printf format attributes. 2014-10-20 23:57:13 +00:00
nicm
2f19df09b1 Copy ACS characters as UTF-8, from Balazs Kezes. 2014-10-02 08:36:26 +00:00
nicm
a5d4b7f3d9 Some more long lines. 2014-04-17 14:45:49 +00:00
nicm
945339b443 Allow replacing each of the many sets of separate foo-{fg,bg,attr}
options with a single foo-style option. For example:

    set -g status-fg yellow
    set -g status-bg red
    set -g status-attr blink

Becomes:

    set -g status-style fg=yellow,bg=red,blink

The -a flag to set can be used to add to rather than replace a style. So:

    set -g status-bg red

Becomes:

    set -ag status-style bg=red

Currently this is fully backwards compatible (all *-{fg,bg,attr} options
remain) but the plan is to deprecate them over time.

From Tiago Cunha.
2014-01-28 23:07:09 +00:00
Nicholas Marriott
772d61f3ed RIS should reset focus reporting, from Hayaki Saito. 2013-05-15 15:32:14 +00:00
Nicholas Marriott
5e4d9a3197 Move the cursor back into the last column on CUU/CUD to match xterm
behaviour. From George Nachman.
2013-03-27 11:19:19 +00:00
Nicholas Marriott
f19836550b Unbreak line wrapping. 2013-03-22 10:41:01 +00:00
Nicholas Marriott
ad5df9bc2f Implement DECAWM (SM/RM 7) using existing MODE_WRAP flag. 2013-03-22 10:36:53 +00:00
Nicholas Marriott
67b4d5b609 Support the latest theory for mouse input, this is enabled/disabled with
SM/RM 1006 and is similar in style to SGR input: \033[<b;x;yM or
\033[b;x;ym. From Egmont Koblinger.
2013-03-22 10:33:50 +00:00
Nicholas Marriott
10682b9e7e Instead of loads of little screen_write_*_on and off functions which
just change mode flags, just have screen_write_mode_set and
screen_write_mode_clear.
2013-03-21 18:47:56 +00:00
Nicholas Marriott
fdbfc7e349 Rather than having two grids for each pane, one for ASCII and one for
UTF-8, collapse the two together. Simplifies the code at the expense of
more memory (which can probably be reduced again later).
2013-01-18 02:16:21 +00:00
Nicholas Marriott
44f8e1caff Implement ECH (erase character, CSI X). Reported by Christian Neukirchen. 2013-01-15 23:18:55 +00:00
Nicholas Marriott
3fa4f691e3 Handle resetting 256-colours properly when parsing #[default],
#[fg=default] and #[bg=default] styles.
2012-12-08 17:05:57 +00:00
Nicholas Marriott
eb0ad181e9 Use ACS characters for choose-tree arrows based on diff from Romain
Francoise.
2012-09-24 12:53:55 +00:00
Nicholas Marriott
df912e3540 xfree is not particularly helpful, remove it. From Thomas Adam. 2012-07-10 11:53:01 +00:00
Nicholas Marriott
0489213b1b Revert screen-write.c r1.54 and fix the bug properly. After wrapping a
line in a pane, the cursor needs to move to the next line unless it
scrolled.
2012-03-17 17:36:03 +00:00
Nicholas Marriott
71df37c247 Store context off before moving the cursor when wrapping, to fix long
standing bug drawing over the status line.
2012-03-14 23:29:07 +00:00
Nicholas Marriott
f4fdddc930 Support "bracketed paste" mode. This adds a -p flag to paste-buffer - if
this is used and the application has requested bracketed pastes, then
tmux surrounds the pasted text by \033[200~ and \033[201~. Applications
like vim can (apparently) use this to avoid, for example, indenting the
text. From Ailin Nemui.
2012-03-03 09:43:22 +00:00
Nicholas Marriott
66f04514cf Add a -R flag to send-keys to reset the terminal. Written ages ago and
Suggested by someone, I forget who.
2012-01-21 08:10:21 +00:00
Nicholas Marriott
f0aad68aee Support for \e[3J to clear the history. Also send the corresponding
terminfo code (E3) before locking.
2011-10-23 10:16:14 +00:00
Nicholas Marriott
96e7f33da3 Support setting the xterm clipboard when copying from copy mode using
the xterm escape sequence for the purpose (if xterm is configured to
allow it).

Written by and much discussed Ailin Nemui, guidance on
xterm/termcap/terminfo from Thomas Dickey.
2011-05-18 20:24:29 +00:00
Nicholas Marriott
044c0f978f Fix character position check, from Tiago Resende. 2011-04-17 19:21:19 +00:00
Nicholas Marriott
d74e5bffba Fix to properly wrap wide characters, from Micah Cowan. 2011-03-26 19:07:33 +00:00
Nicholas Marriott
79e30daeae Support passing through escape sequences to the underlying terminal by
using DCS with a "tmux;" prefix. Escape characters in the sequences must
be doubled. For example:

$ printf '\033Ptmux;\033\033]12;red\007\033\\'

Will pass \033]12;red\007 to the terminal (and change the cursor colour
in xterm). From Kevin Goodsell.
2011-03-07 23:46:27 +00:00
Nicholas Marriott
ecc22c521d When clearing the entire screen, clear lines that are used into the
history like xterm does. Requested ages ago by someone I've forgotten.
2011-01-25 23:40:26 +00:00
Nicholas Marriott
ac3b78a841 Support for UTF-8 mouse input (\033[1005h). This was added in xterm 262
and supports larger terminals than the older way.

If the new mouse-utf8 option is on, UTF-8 mouse input is enabled for all
UTF-8 terminals. The option defaults to on if LANG etc are set in the
same manner as the utf8 option.

With help and based on code from hsim at gmx.li.
2011-01-03 23:35:21 +00:00
Nicholas Marriott
f7c42c21ba Support all four of the xterm mouse modes. Based on a diff from hsim at
gmx.li.
2010-12-29 21:49:06 +00:00
Nicholas Marriott
5afb820d23 Ensure we overwrite UTF-8 wide characters properly, and never overwrite
characters we weren't overlapping.  Fixes "disappearing wide characters"
glitch. From Micah Cowan.
2010-06-21 00:11:12 +00:00
Nicholas Marriott
ac9daf92d7 Merge copy mode and output mode, dropping the latter. Idea and code from
Micah Cowan.
2010-04-06 21:35:44 +00:00
Nicholas Marriott
15a64b805e Massive spaces->tabs and trailing whitespace cleanup, hopefully for the last
time now I've configured emacs to make them displayed in really annoying
colours...
2009-12-03 22:50:09 +00:00
Nicholas Marriott
4ca857e0e9 Remove a couple of unused arguments where possible, and add /* ARGSUSED */ to
the rest to reduce lint output.
2009-11-26 21:37:13 +00:00
Nicholas Marriott
a78cc98c8b Cleanup by moving various (mostly horrible) little bits handling UTF-8 grid
data into functions in a new file, grid-utf8.c, and use sizeof intead of
UTF8_DATA.

Also nuke trailing whitespace from tmux.1, reminded by jmc.
2009-11-18 17:02:17 +00:00
Nicholas Marriott
5d7bff4051 A screen can be one cell wide; don't crash if that is the case. 2009-11-16 13:40:45 +00:00
Nicholas Marriott
9df4e7597d Add an explicit zero-length check for UTF-8 input data, prompted by a report
from parfait via deraadt.

While here, add a statement to set the width when filling with _s if not enough
space (width should never be high enough at the moment anyway), and wrap some
long lines.
2009-11-11 18:53:21 +00:00
Nicholas Marriott
1af09d6330 Try to reduce the UTF-8 mess.
Get rid of passing around u_char[4]s and define a struct utf8_data which has
character data, size (sequence length) and width. Move UTF-8 character
collection into two functions utf8_open/utf8_append in utf8.c which fill in
this struct and use these functions from input.c and the various functions in
screen-write.c.

Space for rather more data than is necessary for one UTF-8 sequence is in the
utf8_data struct because screen_write_copy is still nasty and needs to reinject
the character (after combining) into screen_write_cell.
2009-10-20 19:18:28 +00:00
Nicholas Marriott
62f234ce3b UTF-8 combined character fixes.
Thai can have treble combinations (1 x width=1 then 2 x width=0) so bump the
UTF-8 cell data size to 9 and alter the code to allow this.

Also break off the combining code into a separate function, handle any further
combining beyond the buffer size by replacing the character with _s, and when
redrawing the UTF-8 character don't assume the first part has just been
printed, redraw the entire line.
2009-10-20 17:33:33 +00:00
Nicholas Marriott
387f4d42cc Move the check for whether to force a line wrapper lower down into the tty code
where it has access to the tty width, which is what should have been checked.
2009-10-20 16:32:23 +00:00
Nicholas Marriott
daa26079ee Always move the cursor position on !xenl terminals, since there is no invisible
last cursor position.

Also nuke an unused variable.
2009-10-17 08:35:38 +00:00
Nicholas Marriott
fe26b5d25f Don't print wide characters at screen width - 1. Matches uterm behaviour and
is probably a better idea anyway.
2009-10-17 08:32:18 +00:00
Nicholas Marriott
43d62c1ae3 Instead of having a complicated check to see if the cursor is in the last
position to avoid an explicit wrap, actually move it there.

Some UTF-8 fixes to come.
2009-10-17 08:24:46 +00:00
Nicholas Marriott
d7626cd9d7 When drawing lines that have wrapped naturally, don't force a newline but
permit them to wrap naturally again. This allows terminals that use this to
guess where lines start and end for eg mouse selecting (like xterm) to work
correctly.

This was another long-standing issue raised by several people over the last
while.

Thanks to martynas@ for much testing. This was not trivial to get right so
bringing it in for wider testing and adn to fix any further glitches in-tree.
2009-10-12 17:19:47 +00:00
Nicholas Marriott
8608c6970d When backspace is received at the beginning of a line and the previous line was
wrapped, move the cursor back up to the end of the previous line.

Another one of the forgotten persons requested this quite a while ago (I need
to start noting names on todo items...) when it was quite hard to
implement. Now it is easy and I don't see it can do any harm, so hey presto...
2009-10-12 16:59:55 +00:00
Nicholas Marriott
56157444de Wrap a couple of long lines. 2009-10-12 16:33:39 +00:00
Nicholas Marriott
33ae063cae Permit attributes to be turned off in #[] by prefixing with "no", for example
"noblink".
2009-10-12 11:08:02 +00:00
Nicholas Marriott
4278199101 Stick line length to what is actually used (removing an optimization that
allowed it to be bigger), and use clear line/EOL sequences rather than spaces
in copy/scroll mode.

This fixes xterm copy/paste from tmux which treats trailing spaces differently
from clearing a line with the escape sequences. Reported by martynas@.
2009-09-15 15:14:09 +00:00
Nicholas Marriott
372a8cb1d9 Permit options such as status-bg to be configured using the entire 256 colour
palette by setting "colour0" to "colour255".
2009-09-10 17:16:24 +00:00
Nicholas Marriott
e97006b102 Permit embedded colour and attributes in status-left and status-right using new
#[] special characters, for example #[fg=red,bg=blue,blink].
2009-09-07 10:49:32 +00:00
Nicholas Marriott
65ac8e9f0c Ugh, committed the wrong version of this change and got both solutions rather
than just the second. Remove unused assignment.
2009-08-21 08:12:05 +00:00
Nicholas Marriott
1501b3fbbd A few trivial optimisations: no need to check for zero size if calling
buffer_ensure in buffer.c; expand grid lines by a greater increase than one
each time; and don't read UTF-8 data unless it actually needs to be checked
when overwriting a cell.
2009-08-20 19:14:42 +00:00
Nicholas Marriott
b02e429788 It was originally intended that scroll mode would show content that was
currently off-screen due to resize, but somewhere along the way this got
lost. Restore this behaviour to scroll mode by fixing screen_write_copy to read
up to the saved line length rather than the current screen width. Copy mode
remains unaltered for now.
2009-08-13 16:24:33 +00:00
Nicholas Marriott
06ddd3dcf8 Add a flags member to the grid_line struct and use it to differentiate lines
wrapped at the screen edge from those terminated by a newline. Then use this
when copying to combine wrapped lines together into one.
2009-08-08 15:57:49 +00:00
Nicholas Marriott
97f105cde2 Plug some memory leaks. 2009-07-30 20:41:48 +00:00
Nicholas Marriott
fc65da1eed Draw UTF-8 characters under the selection correctly. 2009-07-27 11:33:21 +00:00
Nicholas Marriott
ddad0be5f7 More tty code tidying: move the saved cursor/region position (from before the
screen was updated) out of struct screen and into struct tty_ctx.
2009-07-22 20:53:38 +00:00
Nicholas Marriott
2ec2837daa enum tty_cmd is only used as an index into the array of command function
pointers, so remove it and use the function pointers directly to represent
themselves.
2009-07-22 18:02:23 +00:00
Nicholas Marriott
6a309c53a8 There are relatively few arguments to tty_cmd_* functions now, so tidy them up
by using a struct rather than hiding everything with varargs.
2009-07-22 16:45:31 +00:00
Nicholas Marriott
5bd72ec629 tty_cmd_raw is only used once, for raw UTF-8 output, so rename it to
tty_cmd_utf8character and eliminate the size argument.
2009-07-22 15:55:32 +00:00
Nicholas Marriott
975f516f51 The scroll region cannot be one line only, ignore attempts to make it so. 2009-07-14 14:47:32 +00:00
Nicholas Marriott
5f2f07ed8a Cursor up and down should be limited by the scroll region (cuu should stop at
the scroll region top if starting from below it and cud stop at the bottom if
starting from above). Fixes another vttest test.
2009-07-09 17:57:11 +00:00
Nicholas Marriott
86c93c6e34 Change inserting and deleting lines inside the scroll region to properly clear
lines that should be inserted/deleted but not moved. Fixes problems with mutt
reported by Brian Lewis, thanks.
2009-07-09 07:58:14 +00:00
Nicholas Marriott
643c219d18 Tidy by removing unused argument from grid_view_{insert,delete}_line_region
functions (currently don't fully work, this is to make fix easier).
2009-07-09 00:29:32 +00:00
Nicholas Marriott
68e06fb6b7 Fix two errors with character/line insertion and deletion: the maximum number
of characters which may be inserted or deleted is the screen width, not one
less (and similarly for lines and height); and if characters or lines are
deleted by moving the ones that follow, the space at the end needs to be
cleared.

This appears to solve long-standing redraw issues most visible when using the
force-width option then scrolling in view(1) or unwrapping lines in emacs.
2009-06-29 21:30:50 +00:00
Nicholas Marriott
1ec736a3dc Status line fixes: don't truncate status-right now the length calculation is
done for UTF-8, limit to the maximum length correctly when printing, and always
print a space even if the left string is longer than the width available.
2009-06-26 15:13:39 +00:00
Ray Lai
74749e8705 Remove trailing newlines, spaces, and tabs.
No binary change.
2009-06-05 03:13:16 +00:00
Nicholas Marriott
c1a4c0186a Support insert mode by using insert character to shift the cells before writing
as normal.
2009-06-03 23:37:30 +00:00
Nicholas Marriott
52ec9b9ec4 Implement the DEC alignment test. With the last change this is enough for the
first cursor test in vttest (in ports) to pass; it still shops a few more
problems though.
2009-06-03 23:30:40 +00:00
Nicholas Marriott
ebe07c2726 Fix some miscalculations when clearing to start of screen: the number of lines
to the cursor is cy not cy - 1, and the current cursor cell should be included.
2009-06-03 23:26:56 +00:00
Nicholas Marriott
6521427a45 New session option, status-utf8, to control the interpretation of top-bit-set
characters in status-left and status-right (if on, they are treated as UTF-8;
otherwise passed through).
2009-06-03 16:54:26 +00:00
Nicholas Marriott
7d45e29683 Add a UTF-8 aware string length function and make UTF-8 in
status-left/status-right work properly. At the moment any top-bit-set
characters are assumed to be UTF-8: a status-utf8 option to configure this will
come shortly.
2009-06-03 16:05:46 +00:00
Nicholas Marriott
35876eaab9 Import tmux, a terminal multiplexor allowing (among other things) a single
terminal to be switched between several different windows and programs
displayed on one terminal be detached from one terminal and moved to another.

ok deraadt pirofti
2009-06-01 22:58:49 +00:00