Commit Graph

297 Commits

Author SHA1 Message Date
nicm
54bcaab70e Use EL1 to clear lines when redrawing the leftmost pane, rather than
spaces.
2017-04-16 20:32:14 +00:00
nicm
9b28200578 Give each client a name. This defaults to the tty name as before but
falls back to an alternative if the tty name is not available. This is
clearer than overloading the client ttyname member and allows us to
remove the path stored in the tty struct, it should always be the same
as the client.
2017-04-05 10:49:46 +00:00
nicm
b9a4beb6e7 Write raw strings in one go rather than character at a time. 2017-03-24 14:45:00 +00:00
nicm
df3ab87964 Add support for the strikethrough attribute (SGR 9), using the new smxx
terminfo capability. This means there are now nine attribute bits, so
anything above 0xff uses an extended cell.
2017-03-22 07:16:54 +00:00
nicm
2a9d697771 Invalidate the cursor when we think we should have wrapped. 2017-03-15 15:22:14 +00:00
nicm
3c3c08b6d9 Try to avoid moving the cursor to the start of the next line when
printing cells if it is already at the very end of the line and the
terminal will wrap it to the next line itself, this means terminals
still see it as a wrapped line for the purposes of their own mouse
selection. Reported by millert@.
2017-03-15 09:21:21 +00:00
nicm
78ca1b0265 Always send smkx to the terminal outside, the keys we get from terminfo
are the keys when it is on.
2017-03-08 14:34:35 +00:00
nicm
dc8fefe902 Collect strings correctly when on terminals that don't support UTF-8. 2017-03-06 09:02:59 +00:00
nicm
8a0b279c31 Change pane redraw to collect cells up as well, and simplify it a bit. 2017-02-21 16:25:04 +00:00
nicm
82db1fa9e5 There are buggy terminals out there that do not move the cursor to 0,0
after CSR, so invalidate the cursor position rather than assuming 0,0.
2017-02-16 12:56:01 +00:00
nicm
dd25a6cdc2 Do not clear to end of screen unless the pane is at the bottom. 2017-02-15 11:22:13 +00:00
nicm
921880e00b Add not delete the event if more to write. 2017-02-10 15:39:43 +00:00
nicm
d22c15107b Don't use a bufferevent for the tty, so we can keep better track of what
is being written and when.

Also a manpage typo fix from jmc@.
2017-02-10 12:59:18 +00:00
nicm
1811dc5271 Another helper function to write to terminal and log. 2017-02-08 23:53:03 +00:00
nicm
2f854969ff Do not adjust region lower by pane offset when scrolling up, it is
already an absolute position.
2017-02-08 22:42:07 +00:00
nicm
e100d465da Add support for scroll up escape sequence (CSI S) and use it when
possible instead of sending individual line feeds.
2017-02-08 17:31:09 +00:00
nicm
13a0b6bb3f Collect sequences of printable ASCII characters and process them
together instead of handling them one by one. This is significantly
faster. Sequences are terminated when we reach the end of the line, fill
the internal buffer, or a different character is seen by the input
parser (an escape sequence, or UTF-8).

Rather than writing collected sequences out immediately, hold them until
it is necessary (another screen modification, or we consume all
available data). This means we can discard changes that would have no
effect (for example, lines that would just be scrolled off the screen or
cleared). This reduces the total amount of data we write out to the
terminal - not important for fast terminals, but a big help with slow
(like xterm).
2017-02-08 16:45:18 +00:00
nicm
d4b006b9fa Fix clear start of line. 2017-02-08 16:18:20 +00:00
nicm
7475165cd8 Some other tidying bits. 2017-02-08 15:49:29 +00:00
nicm
96b66f8fc3 Remove unnecessary duplicate check. 2017-02-08 15:24:48 +00:00
nicm
713f3b05f3 Improve some of the logging on resize. 2017-02-08 13:53:32 +00:00
nicm
cb80901d33 Log size of output buffer as well. 2017-02-08 08:54:45 +00:00
nicm
9cc02d1498 Trying to avoid the occasional newline by saving the last cell on screen
is not actually helping us much and just adds complexity, so don't
bother.
2017-02-08 08:50:10 +00:00
nicm
c0a34821c1 Do not clear the scroll region, instead set it to the scroll region we
actually want.
2017-02-07 18:27:46 +00:00
nicm
6ea36afc4b DECSLRM in xterm(1) appears to have a quirk where it can generate an
extra scroll of the entire terminal; issuing DECSTBM first prevents
this. Do that for now.
2017-02-07 17:13:28 +00:00
nicm
9491a5c1cf Unfortunately DECFRA does not handle default colours properly (it does
not reset colours when in SGR 0), so we can't use it without more
trouble than it is worth. Abandon the idea for now.
2017-02-07 14:33:37 +00:00
nicm
d60e585d9e Use DECFRA on VT420 compatible terminals (so, xterm) and ED on all
others for clearing panes.
2017-02-06 22:05:11 +00:00
nicm
68e04907de Do not go through the whole attributes setting process if the new cell
is the same as the previous one.
2017-02-06 19:45:23 +00:00
nicm
10e14ae504 Add BCE for clear to start of screen, which was somehow missed. 2017-02-06 19:26:49 +00:00
nicm
3fd34e70e5 Only redraw the modified character when adding combining characters, not
the whole line.
2017-02-06 13:23:00 +00:00
nicm
dd0c814779 Implement "all event" (1003) mouse mode but in a way that works. The
main issue is that if we have two panes, A with 1002 and B with 1003, we
need to set 1003 outside tmux in order to get all the mouse events, but
then we need to suppress the ones that pane A doesn't want. This is easy
in SGR mouse mode, because buttons == 3 is only used for movement events
(for other events the trailing m/M marks a release instead), but in
normal mouse mode we can't tell so easily. So for that, look at the
previous event instead - if it is drag+release as well, then the current
event is a movement event.
2017-02-01 09:55:07 +00:00
nicm
9b6aeacdc0 aixterm colours can be used if -2 is given, as well as if TERM tells us
the terminal has >=16 colours.
2017-01-12 00:30:41 +00:00
nicm
9e786030df Fix setting the palette of aixterm colours (90-97). 2017-01-12 00:19:32 +00:00
nicm
74c40d04ea Be less aggressive about turning margins off. 2017-01-11 23:10:04 +00:00
nicm
3bb14001b9 Add some missing special keys to key_string_lookup_key, fix a mouse
check in server_client_handle_key, and tweak a comment.
2017-01-11 22:36:07 +00:00
nicm
bf6a5c056d Add a format for terminal type. 2017-01-11 16:09:57 +00:00
nicm
314e933914 Add support for the OSC 4 and OSC 104 palette setting escape sequences,
from S Gilles.
2017-01-07 15:28:13 +00:00
nicm
5ea143f521 Only skip moving the cursor if it is already in the last position _on
the same line_, fixes redraw bug reported by patrick keshishian.
2016-12-07 09:16:55 +00:00
nicm
1a6156d8fd Fix check for cursor at end of line. 2016-11-30 13:20:02 +00:00
nicm
9fc925ac51 When comparing ocy to orlower in tty_cmd_cell, there is no need to add
yoff (because they are both already relative to the pane). Also fix some
other minor nits.
2016-11-28 17:50:00 +00:00
nicm
ddf7ac5ae4 Fix calculation of whether we need a region for drawing a cell (only if
full width and at the edge of the region), otherwise clear the region entirely.
2016-11-16 13:31:22 +00:00
nicm
c34a79b152 Turn on margins, with a couple of fixes (only limit to the pane for line
feeds, and do not move cursor to end for full width panes).
2016-11-15 15:17:28 +00:00
nicm
d81a5c630f And of course I just find a bug, disable previous for now. 2016-11-15 14:08:27 +00:00
nicm
0ace779cde Initial attempt to make use of left and right margins if the terminal
supports them (that is, if it advertises itself as a VT420 - probably
just xterm). These are the vertical equivalent of the scroll region and
allow much faster scrolling of panes that do not take up the full width
of the terminal.
2016-11-15 14:02:32 +00:00
nicm
d413a945ac Don't make assumptions about line wrap on !xenl terminals, means that
using a wrong TERM without xenl is not so broken if used on a sensible
terminal.
2016-10-14 21:48:00 +00:00
nicm
4179b42424 Add support for BCE (background colour erase). This makes various escape
sequences (notable EL and ED but also IL, DL, ICH, DCH) create blank
cells using the current background colour rather than the default
colour.

On modern systems BCE doesn't really have many benefits, but most other
terminals now support it, some (lazy) applications rely on it, and it is
not hard to include now that we have pane background colours anyway.

Mostly written by Sean Haugh.
2016-10-13 20:27:27 +00:00
nicm
4160df4ca4 Redraw selection in tty_draw_line, so it appears when redrawing whole
pane. Reported by Theo Buehler.
2016-10-12 13:24:07 +00:00
nicm
e45401846f Add static in window-*.c and move some internal functions out of tmux.h. 2016-10-11 13:21:59 +00:00
nicm
c426e485e5 Loads more static, except for cmd-*.c and window-*.c. 2016-10-10 21:29:23 +00:00
nicm
61dfbe702e Remove some redundant checks and make ich/dch consistent. 2016-10-03 19:19:18 +00:00
nicm
0f73af876f Don't update cells in each block of data read from a pane immediately,
instead track them as change (dirty) and update them once at the end,
saves much time if repeatedly writing the same cell. Also fix comparison
of cells being equal in a few places (memcmp is not enough).
2016-07-15 00:49:08 +00:00
nicm
1921fac814 Cache the window styles and do not look up the window-style options
unless they have changed.
2016-05-30 09:50:20 +00:00
nicm
7d105738b6 Send two cub1 instead of using cub for moving the cursor two left. This
is normally better because using cub1 will be ^H^H (so two bytes) but
cub would be ^[[2D (four).
2016-05-30 09:26:49 +00:00
nicm
88bd5b15ff tty_client_ready can not be internal to tty.c again. 2016-04-30 18:59:02 +00:00
nicm
bcb41a09b3 RGB colours shouldn't be mixed up with aixterm colours, return before
that happens when working out if they are supported.
2016-03-03 12:58:15 +00:00
nicm
427b820426 Support for RGB colour, using the extended cell mechanism to avoid
wasting unnecessary space. The 'Tc' flag must be set in the external
TERM entry (using terminal-overrides or a custom terminfo entry), if not
tmux will map to the closest of the 256 or 16 colour palettes.

Mostly from Suraj N Kurapati, based on a diff originally by someone else.
2016-01-29 11:13:56 +00:00
nicm
995af0e2b7 I no longer use my SourceForge address so replace it. 2016-01-19 15:59:12 +00:00
nicm
2a1f27eb1a Couple of trivial style nits. 2015-12-28 14:02:52 +00:00
nicm
88bc8f3528 Style nits and line wrapping of function declarations. 2015-12-11 16:37:21 +00:00
nicm
32e510bd70 Remove support for the UTF-8 mouse extension. This was a briefly used,
poor idea that was fairly quickly replaced by SGR mouse input (which is
now widespread). It is impossible to tell the difference between UTF-8
and non-UTF-8 mouse input; since the mouse-utf8 option was removed tmux
has not handled it correctly in any case; and it is ridiculous to have
three different forms of mouse input.
2015-11-23 20:53:09 +00:00
nicm
577c0e3e5a Use __unused rather than rolling our own. 2015-11-18 14:27:44 +00:00
nicm
c5689a5a40 Long overdue change to the way we store cells in the grid: now, instead
of storing a full grid_cell with UTF-8 data and everything, store a new
type grid_cell_entry. This can either be the cell itself (for ASCII
cells), or an offset into an extended array (per line) for UTF-8
data.

This avoid a large (8 byte) overhead on non-UTF-8 cells (by far the
majority for most users) without the complexity of the shadow array we
had before. Grid memory without any UTF-8 is about half.

The disadvantage that cells can no longer be modified in place and need
to be copied out of the grid and back but it turned out to be lot less
complicated than I expected.
2015-11-13 08:09:28 +00:00
nicm
abb4e9e2fa The output log is only useful once and it means creating a file, so open
it once at startup instead of in every call to tty_open.
2015-10-31 13:12:03 +00:00
nicm
44657bf932 Move struct options into options.c. 2015-10-27 15:58:42 +00:00
nicm
26a55ddcf9 Remove some unnecessary checks before free(). 2015-10-23 16:30:15 +00:00
nicm
63a3fd3c0f Use tty_term_flag not _has for XT, and make -2 force direct use of
256-colour escape sequences (so setaf/setab can be bypassed if needed).
2015-10-23 15:52:54 +00:00
nicm
03d7dba5d8 If the terminal has colors=256, only try to use setaf/setab if they
exist, reported by Filipe Brandenburger.
2015-09-25 23:30:12 +00:00
nicm
38e3baab2a A one line helper function is a little silly. 2015-09-02 17:43:25 +00:00
nicm
8121127606 We no longer need the terminal service class, so don't bother asking for it. 2015-09-02 17:37:54 +00:00
nicm
e45d624df2 Fix line endings. 2015-07-13 15:51:31 +00:00
nicm
c7374c31c4 Initialize cwd fd to -1 so that we don't close fd 0 if the client is
destroyed before it is changed. Also allow ttyname() to fail. Fixes
problems when running out of file descriptors reported by Bruno Sutic.
2015-07-13 15:49:31 +00:00
nicm
2c53b23d59 In terminfo, sometimes cvvis implies cnorm and sometimes it doesn't, so
don't assume it does. Fixes missing cursor with emacs-in-tmux-in-tmux.
2015-05-19 08:48:37 +00:00
nicm
3f4ee98162 To replace c0-*, add a high watermark to the pty event, and also backoff
when the any of the ttys the pane is going to write to has buffered
enough data.
2015-05-12 22:40:38 +00:00
nicm
33a585c47f Turn cursor off during redraw, pointed out by George Nachman. 2015-05-06 07:52:06 +00:00
nicm
7382ba82c5 If default-terminal is set to "screen" or "screen-*", emulate screen's
historical (incorrect) behaviour for SGR 3 and send smso
(standout). Previously, we would send sitm (italics) if the terminal
outside had it and smso otherwise. This was acceptably until recently
because xterm's terminfo entry lacked sitm, so most users got smso.

People who want italics should set default-terminal to the forthcoming
"tmux" entry (and be prepared to deal with it being missing on older
hosts).

As a side-effect this changes default-terminal to be a server rather
than a session option.

suggested by and ok naddy
2015-04-29 15:59:08 +00:00
nicm
d23af6cca0 Explicitly cancel mouse "button" mode, this happens implicitly with some
one of the other things we send with xterm, but not with urxvt. Reported
by sthen@.
2015-04-25 15:57:48 +00:00
nicm
aeedb464a6 Convert clients list into a TAILQ. 2015-04-24 23:17:11 +00:00
nicm
bf635e7741 Rewrite of tmux mouse support which was a mess. Instead of having
options for "mouse-this" and "mouse-that", mouse events may be bound as
keys and there is one option "mouse" that turns on mouse support
entirely (set -g mouse on).

See the new MOUSE SUPPORT section of the man page for description of the
key names and new flags (-t= to specify the pane or window under mouse
as a target, and send-keys -M to pass through a mouse event).

The default builtin bindings for the mouse are:

    bind -n   MouseDown1Pane select-pane -t=; send-keys -M
    bind -n MouseDown1Status select-window -t=
    bind -n   MouseDrag1Pane copy-mode -M
    bind -n MouseDrag1Border resize-pane -M

To get the effect of turning mode-mouse off, do:

    unbind -n MouseDrag1Pane
    unbind -temacs-copy MouseDrag1Pane

The old mouse options are now gone, set-option -q may be used to
suppress warnings if mixing configuration files.
2015-04-19 21:34:21 +00:00
nicm
ee123c2489 Support setting the default window and pane background colours (window
and active pane via window-style and window-active-style options, an
individual pane by a new select-pane -P flag). From J Raynor.
2015-04-19 21:05:27 +00:00
nicm
4a7587931c Fix some issues in bright colour handling. Bold background doesn't exist
so there is no reason for tty_check_bg to mess with the BRIGHT flag at
all, ever. Also use aixterm colours for 256-to-16 translation if the
terminal supports them. And there is no reason for tty_colours_bg to
worry about whether the terminal supports them - tty_check_bg has
already taken care of it.
2015-04-15 22:34:46 +00:00
nicm
eec27f9257 Use tty_term_flag not _has for flags, also fix a typo (position not
permission).
2015-04-15 22:10:13 +00:00
nicm
90bf7026f6 Reset bracket paste mode on detach. 2015-02-05 11:46:57 +00:00
nicm
144025e3e6 Focus off needs to be sent with tty_raw, reported by Geoff Nixon. 2015-01-30 12:33:03 +00:00
nicm
16bdd970dc Support blinking cursor mode, both the xterm CSI ?12 h/l and (the
backwards) screen CSI 34 h/l. From Guanpeng Xu.
2015-01-20 08:18:04 +00:00
nicm
1ac96200a7 Remove support for the continuous reporting "any" mouse mode which never
really worked properly and is rarely used.
2014-08-09 07:33:37 +00:00
jsg
40cb4cb086 specifying ECHOCTL once is enough
ok nicm@
2014-04-25 12:45:16 +00:00
nicm
a5d4b7f3d9 Some more long lines. 2014-04-17 14:45:49 +00:00
nicm
c3b2e5eed3 Wrap some long lines. 2014-04-17 12:57:28 +00:00
nicm
f1828921df Change terminal-overrides to a server option (now that we have them), it
doesn't make much sense as a session option.
2014-02-23 00:53:06 +00:00
nicm
f2e54e1e2f If the terminfo entry has colors#256, assume that setaf and setab work
and use them for the 256 colour set. If the terminfo entry doesn't have
colors#256 and the user gives -2 to the client, use a \033[38;5;Xm
sequence as before. Should allow fbterm to work with it's weird setaf
and setab.
2014-02-14 14:37:08 +00:00
nicm
945339b443 Allow replacing each of the many sets of separate foo-{fg,bg,attr}
options with a single foo-style option. For example:

    set -g status-fg yellow
    set -g status-bg red
    set -g status-attr blink

Becomes:

    set -g status-style fg=yellow,bg=red,blink

The -a flag to set can be used to add to rather than replace a style. So:

    set -g status-bg red

Becomes:

    set -ag status-style bg=red

Currently this is fully backwards compatible (all *-{fg,bg,attr} options
remain) but the plan is to deprecate them over time.

From Tiago Cunha.
2014-01-28 23:07:09 +00:00
nicm
f52eac6225 Don't turn on modifyOtherKeys by default, it is annoying if tmux is
killed and it's left on and we can't turn it on and off like we do for
attributes. It's not hard to enable in .Xresources or .Xdefaults anyway.
2013-10-20 09:37:50 +00:00
Nicholas Marriott
3977dba761 Focus events can cause trouble if left on and they can't be turned off
during idle periods (like the other states are) because we'd miss
events. So add a server option to control them. Defaults to off.
2013-06-23 13:10:46 +00:00
Stuart Henderson
d6debc21c7 revert r1.156 "Add support for focus notifications when tmux pane changes"
beck@ found annoying beeps if a machine was shutdown while tmux is running
and you then focus in/out of an xterm; kettenis tracked it down to 1.156.
2013-06-11 19:18:02 +00:00
Nicholas Marriott
13441e8cb8 The actual terminfo entries we ended up with for cursor changes are Cs,
Ce, Ss and Se (not Cc, Ce, Cs, Csr). So use and document these instead
of the ones we were using earlier.
2013-06-02 07:52:15 +00:00
Nicholas Marriott
cbee283c26 Send an SGR0 after turning on modifyOtherKeys to fix Terminal.app which
treats \033[>4;1m and \033[4;1m (bold+underline). Reported & tested by
otto@.
2013-04-11 07:27:27 +00:00
Nicholas Marriott
982354765b Remove tmux's (already minimal) 88 colour support. Such terminals are
few and unnecessary.
2013-03-27 11:17:12 +00:00
Nicholas Marriott
a60687f9ba Handle focus events from the terminal, from Aaron Jensen. 2013-03-24 09:28:59 +00:00
Nicholas Marriott
79f5fe6f5b Use tty_raw on stop, not tty_puts. 2013-03-22 10:40:22 +00:00
Nicholas Marriott
22a2949bd2 Correctly handle UTF8 mouse option being toggled, from Egmont Koblinger. 2013-03-22 10:34:46 +00:00