allows it to be changed independently from the real active pane stored in the
window. This is can be used with session groups which allow an independent
current window (although it would be nice to have a flag for this too and
remove session groups). The client active pane is only really useful
interactively, many things (hooks, window-style, zooming) still use the window
active pane.
there should be no change to existing behaviour) and are set and shown
with set-option -p and show-options -p.
Change remain-on-exit and window-style/window-active-style to be pane
options (some others will be changed later).
This makes select-pane -P and -g unnecessary so no longer document them
(they still work) and no longer document set-window-option and
show-window-options in favour of set-option -w and show-options -w.
been a limitation for a long time.
There are two new options, window-size and default-size, and a new
command, resize-window. The force-width and force-height options and the
session_width and session_height formats have been removed.
The new window-size option tells tmux how to work out the size of
windows: largest means it picks the size of the largest session,
smallest the smallest session (similar to the old behaviour) and manual
means that it does not automatically resize windows. The default is
currently largest but this may change. aggressive-resize modifies the
choice of session for largest and smallest as it did before.
If a window is in a session attached to a client that is too small, only
part of the window is shown. tmux attempts to keep the cursor visible,
so the part of the window displayed is changed as the cursor moves (with
a small delay, to try and avoid excess redrawing when applications
redraw status lines or similar that are not currently visible). The
offset of the visible portion of the window is shown in status-right.
Drawing windows which are larger than the client is not as efficient as
those which fit, particularly when the cursor moves, so it is
recommended to avoid using this on slow machines or networks (set
window-size to smallest or manual).
The resize-window command can be used to resize a window manually. If it
is used, the window-size option is automatically set to manual for the
window (undo this with "setw -u window-size"). resize-window works in a
similar way to resize-pane (-U -D -L -R -x -y flags) but also has -a and
-A flags. -a sets the window to the size of the smallest client (what it
would be if window-size was smallest) and -A the largest.
For the same behaviour as force-width or force-height, use resize-window
-x or -y, and "setw -u window-size" to revert to automatic sizing..
If the global window-size option is set to manual, the default-size
option is used for new windows. If -x or -y is used with new-session,
that sets the default-size option for the new session.
The maximum size of a window is 10000x10000. But expect applications to
complain and much higher memory use if making a window excessively
big. The minimum size is the size required for the current layout
including borders.
The refresh-client command can be used to pan around a window, -U -D -L
-R moves up, down, left or right and -c returns to automatic cursor
tracking. The position is reset when the current window is changed.
CMD_FIND_* flags in the cmd_entry and call it for the command. Commands
with special requirements call it themselves and update the target for
hooks to use.
confusing, particularly trying to automatically figure out what target
hooks should be using. So simplify it:
- drop before hooks entirely, they don't seem to be very useful;
- commands with special requirements now fire their own after hook (for
example, if they change session or window, or if they have -t and -s
and need to choose which one the hook uses as current target);
- commands with no special requirements can have the CMD_AFTERHOOK flag
added and they will use the -t state.
At the moment new-session, new-window, split-window fire their own hook,
and display-message uses the flag. The remaining commands still need to
be looked at.
- Prepare the state again before the "after" hooks are run, because the
command may have killed or moved windows.
- Use the hooks list from the newly prepared target, not the old hooks
list (only matters for new-session really).
- Correctly detect an invalid current state and ignore it in
cmd_find_target ("killw; swapw").
- Change neww, new, killp, killw, splitw, swapp, swapw to update the
current state (used if no explicit target is given) to something more
useful after they have finished. For example, neww changes it to the
newly created window.
Hooks are still relatively new and primitive so there are likely to be
more changes to come.
Parts based on bug reports from Uwe Werler and Iblis Lin.
the state (client, session, winlink, pane) for it it before entering the
command. Each command provides some flags that tell the prepare step
what it is expecting.
This is a requirement for having hooks on commands (for example, if you
hook "select-window -t1:2", the hook command should to operate on window
1:2 not whatever it thinks is the current window), and should allow some
other target improvements.
The old cmd_find_* functions remain for the moment but that layer will
be dropped later.
Joint work with Thomas Adam.
server at a time; it may be toggled or cleared with select-pane -m and
-M (the border is highlighted). A new target '~' or '{marked}' specifies
the marked pane to commands and it is the default target for the
swap-pane and join-pane -s flag (this makes them much simpler to use -
mark the source pane and then change to the target pane to run swapp or
joinp).
directly with a helper function in the cmd_entry, include a table of
bind-key commands and pass them through the command parser and a
temporary cmd_q.
As well as being smaller, this will allow default bindings to be command
sequences which will probably be needed soon.
window or unzoom (restored to the normal layout) if it already zoomed,
bound to C-b z by default. The pane is unzoomed on pretty much any
excuse whatsoever.
We considered making this a new layout but the requirements are quite
different from layouts so decided it is better as a special case. Each
current layout cell is saved, a temporary one-cell layout generated and
all except the active pane set to NULL.
Prompted by suggestions and scripts from several. Thanks to Aaron Jensen
and Thiago Padilha for testing an earlier version.
commands and allow a command to block execution of subsequent
commands. This allows run-shell and if-shell to be synchronous which has
been much requested.
Each client has a default command queue and commands are consumed one at
a time from it. A command may suspend execution from the queue by
returning CMD_RETURN_WAIT and then resume it by calling cmd_continue() -
for example run-shell does this from the callback that is fired after
the job is freed.
When the command queue becomes empty, command clients are automatically
exited (unless attaching). A callback is also fired - this is used for
nested commands in, for example, if-shell which can block execution of
the client's cmdq until a new cmdq becomes empty.
Also merge all the old error/info/print functions together and lose the
old curclient/cmdclient distinction - a cmdq is bound to one client (or
none if in the configuration file), this is a command client if
c->session is NULL otherwise an attached client.
add a new value to mean "leave client running but don't attach" to fix
problems with using some commands in a command sequence. Most of the
work by Thomas Adam, problem reported by "jspenguin" on SF bug 3535531.
Originally, tmux commands were parsed in the client process into a
struct with the command data which was then serialised and sent to the
server to be executed. The parsing was later moved into the server (an
argv was sent from the client), but the parse step and intermediate
struct was kept.
This change removes that struct and the separate parse step. Argument
parsing and printing is now common to all commands (in arguments.c) with
each command left with just an optional check function (to validate the
arguments at parse time), the exec function and a function to set up any
key bindings (renamed from the old init function).
This is overall more simple and consistent.
There should be no changes to any commands behaviour or syntax although
as this touches every command please watch for any unexpected changes.
using -p index, a target pane is now addressed with the normal -t window form
but suffixed with a period and a pane index, for example :0.2 or
mysess:mywin.1. An unadorned number such as -t 1 is tried as a pane index in
the current window, if that fails the same rules are followed as for a target
window and the current pane in that window used.
As a side-effect this now means that swap-pane can swap panes between different
windows.
Note that this changes the syntax of the break-pane, clear-history, kill-pane,
resize-pane, select-pane and swap-pane commands.
This is the first of two changes to make the protocol more resilient and less
sensitive to other changes in the code, particularly with commands. The client
now packs argv into a buffer and sends it to the server for parsing, rather
than doing it itself and sending the parsed command data.
As a side-effect this also removes a lot of now-unused command marshalling
code.
Mixing a server without this change and a client with or vice versa will cause
tmux to hang or crash, please ensure that tmux is entirely killed before
upgrading.
Each window now has a tree of layout cells associated with it. In this tree,
each node is either a horizontal or vertical cell containing a list of other
cells running from left-to-right or top-to-bottom, or a leaf cell which is
associated with a pane.
The major functional changes are:
- panes may now be split arbitrarily both horizontally (splitw -h, C-b %) and
vertically (splitw -v, C-b ");
- panes may be resized both horizontally and vertically (resizep -L/-R/-U/-D,
bound to C-b left/right/up/down and C-b M-left/right/up/down);
- layouts are now applied and then may be modified by resizing or splitting
panes, rather than being fixed and reapplied when the window is resized or
panes are added;
- manual-vertical layout is no longer necessary, and active-only layout is gone
(but may return in future);
- the main-pane layouts now reduce the size of the main pane to fit all panes
if possible.
Thanks to all who tested.
decision for whether or not a pane should be drawn out of the layout code and
into the redraw code.
This is needed for the new layout design, getting it in now to make that easier
to work on.
maintain and is only going to get worse as more are used. So instead, add a new
uint64_t member to cmd_entry which is a bitmask of upper and lowercase options
accepted by the command.
This means new single character options can be used without the need to add it
explicitly to the list.
crashes when trying to find the new active pane.
While here, nuke an unused pane flag.
Fixes PR 6160, reported by and a slightly different version of diff tested by
ralf.horstmann at gmx.de.
terminal to be switched between several different windows and programs
displayed on one terminal be detached from one terminal and moved to another.
ok deraadt pirofti
