1
0
mirror of https://github.com/tmux/tmux.git synced 2024-12-14 10:58:48 +00:00
Commit Graph

52 Commits

Author SHA1 Message Date
nicm
d98d316903 Some new notifications, mainly for active pane and current window and
session:

    pane-mode-changed
    window-pane-changed
    client-session-changed
    session-window-changed

From Joshua Brot.
2017-05-04 07:16:43 +00:00
nicm
ee45a8a149 Get rid of the extra layer of flags and cmd_prepare() and just store the
CMD_FIND_* flags in the cmd_entry and call it for the command. Commands
with special requirements call it themselves and update the target for
hooks to use.
2017-04-22 10:22:39 +00:00
nicm
2c0f826c36 Mouse bindings and hooks set up an initial current state when running a
command. This is used for the session, window and pane for all commands
in the command sequence if there is no -t or -s.

However, using it for all commands in the command sequence means that if
the active pane or current session is changed, subsequent commands still
use the previous state. So make commands which explicitly change the
current state (such as neww and selectp) update it themselves for later
commands. Commands which may invalidate the state (like killp) are
already OK because an invalid state will be ignored.

Also fill in the current state for all key bindings rather than just the
mouse, so that any omissions are easier to spot.
2017-04-22 08:56:24 +00:00
nicm
bba588752f Store state shared between multiple commands in the queue in a shared
structure.
2017-04-21 14:01:19 +00:00
nicm
e67548dc36 Cancel key table when switching session, unless the key is going to
repeat. Reported by Amos Bird.
2017-02-06 15:00:41 +00:00
nicm
54309cc25d Do not clear the key table when changing session on a client, so that
switch-client and friends work with bind -n.
2017-01-28 16:11:27 +00:00
nicm
4b2821ff98 Make update-environment an array as well. 2017-01-24 20:15:32 +00:00
nicm
cae0fbbe8c Nits found with clang. 2017-01-06 13:26:09 +00:00
nicm
b342bd0b46 Mass rename struct cmd_q to struct cmdq_item and related. 2016-10-16 19:04:05 +00:00
nicm
a81685bfac Add static in cmd-* and fix a few other nits. 2016-10-10 21:51:39 +00:00
nicm
995af0e2b7 I no longer use my SourceForge address so replace it. 2016-01-19 15:59:12 +00:00
nicm
60cbdf9ccd Repair switch-client -l and switch-client with a window target. 2015-12-23 00:12:57 +00:00
nicm
a3129fd4e8 Instead of combined flags for -c, -s, -t, split into different sets
using an enum and simplify the parsing code.
2015-12-14 00:31:54 +00:00
nicm
ecfeee2e82 Use member names in cmd_entry definitions so I stop getting confused
about the order.
2015-12-13 21:53:57 +00:00
nicm
4a4daf1303 Instead of every command resolving the target (-t or -s) itself, prepare
the state (client, session, winlink, pane) for it it before entering the
command. Each command provides some flags that tell the prepare step
what it is expecting.

This is a requirement for having hooks on commands (for example, if you
hook "select-window -t1:2", the hook command should to operate on window
1:2 not whatever it thinks is the current window), and should allow some
other target improvements.

The old cmd_find_* functions remain for the moment but that layer will
be dropped later.

Joint work with Thomas Adam.
2015-12-13 14:32:38 +00:00
nicm
5ed17e84fa Add key-table option to set the default key table for a session, allows
different key bindings for different sessions and a few other things.
2015-12-12 18:32:24 +00:00
nicm
6a50cf89b4 Return after changing key table. 2015-12-12 18:28:47 +00:00
nicm
d7e11d0af7 Check alerts when session changes, from Patrick Palka. 2015-12-11 12:39:47 +00:00
mmcc
dbfce2a4d8 Use ^= instead of a verbose alternative. ok nicm@ 2015-12-08 00:51:17 +00:00
nicm
bf9c933cae Like options, move the environ struct into environ.c. 2015-10-28 09:51:55 +00:00
nicm
44657bf932 Move struct options into options.c. 2015-10-27 15:58:42 +00:00
nicm
dc66795e35 Don't update last session when the session is unchanged, from Sina Siadat. 2015-09-22 21:56:16 +00:00
nicm
cfabe30bec Add session_last_attached time and format, from Sina Siadat. 2015-09-10 08:58:14 +00:00
nicm
57cc4d45d5 Make session_update_activity more useful and use it in more places. 2015-08-28 13:01:03 +00:00
nicm
75d10058a4 Run status update on a per-client timer at status-interval. 2015-08-28 12:16:28 +00:00
nicm
b298478435 Update environment with -E when attach-session used on an already
attached session or switch-client used on the current session. From Cam
Hutchison.
2015-07-06 14:24:57 +00:00
nicm
c4e811e519 Add -E flag when attaching or switching client to bypass
update-environment, from Steven Lu.
2015-06-07 21:39:39 +00:00
nicm
d174b9cfcc Update environment when switching sessions as well as attaching, from Si
Beaumont.
2015-05-07 14:07:16 +00:00
nicm
6dbd63ba4f Move the functions to convert ids from strings into session.c and window.c. 2015-04-25 18:09:28 +00:00
nicm
bded743706 Support for multiple key tables to commands to be bound to sequences of
keys. The default key bindings become the "prefix" table and -n the
"root" table. Keys may be bound in new tables with bind -T and
switch-client -T used to specify the table in which the next key should
be looked up. Based on a diff from Keith Amling.
2015-04-20 15:34:56 +00:00
nicm
45dfc5a074 Instead of setting up the default keys by building the key struct
directly with a helper function in the cmd_entry, include a table of
bind-key commands and pass them through the command parser and a
temporary cmd_q.

As well as being smaller, this will allow default bindings to be command
sequences which will probably be needed soon.
2014-10-20 22:29:25 +00:00
nicm
2740490e27 Remove the "info" message mechanism, this was only used for about five
mostly useless and annoying messages. Change those commands to silence
on success like all the others. Still accept the -q command line flag
and "quiet" server option for now.
2014-04-17 07:55:43 +00:00
nicm
325396046a Avoid use of uninitialized variable, from Thomas Adam. 2014-02-12 20:26:13 +00:00
nicm
c2cac69a22 Similar to attach-session, make switch-client -t accept a window and
pane. From Johannes Jakobsson.
2014-01-09 14:28:14 +00:00
nicm
d45c12b6c9 Remove the barely-used and unnecessary command check() function. 2013-10-10 12:00:18 +00:00
Nicholas Marriott
20636d956d Add a command queue to standardize and simplify commands that call other
commands and allow a command to block execution of subsequent
commands. This allows run-shell and if-shell to be synchronous which has
been much requested.

Each client has a default command queue and commands are consumed one at
a time from it. A command may suspend execution from the queue by
returning CMD_RETURN_WAIT and then resume it by calling cmd_continue() -
for example run-shell does this from the callback that is fired after
the job is freed.

When the command queue becomes empty, command clients are automatically
exited (unless attaching). A callback is also fired - this is used for
nested commands in, for example, if-shell which can block execution of
the client's cmdq until a new cmdq becomes empty.

Also merge all the old error/info/print functions together and lose the
old curclient/cmdclient distinction - a cmdq is bound to one client (or
none if in the configuration file), this is a command client if
c->session is NULL otherwise an attached client.
2013-03-24 09:54:10 +00:00
Nicholas Marriott
bb8457b166 Fix error reporting for client commands by adding a flag to
cmd_find_client to tell it whether or not to show errors, sometimes it's
needed and sometimes not.
2013-03-24 09:27:19 +00:00
Nicholas Marriott
ede8312d59 Make command exec functions return an enum rather than -1/0/1 values and
add a new value to mean "leave client running but don't attach" to fix
problems with using some commands in a command sequence. Most of the
work by Thomas Adam, problem reported by "jspenguin" on SF bug 3535531.
2012-07-11 07:10:15 +00:00
Nicholas Marriott
cd10f7322a Only hide flags on the current window when the session is attached, from
Roland Walker.
2012-01-21 06:13:16 +00:00
Nicholas Marriott
88e9079870 Add a -r flag to switch-client to toggle the client read-only flag. From
Johan Commelin.
2011-08-16 10:00:52 +00:00
Nicholas Marriott
5d519ba526 Add a flag to cmd_find_session so that attach-session can prefer
unattached sessions when choosing the most recently used (if -t is not
given). Suggested by claudio@.
2011-04-05 19:37:01 +00:00
Nicholas Marriott
7502cb3adb Clean up and simplify tmux command argument parsing.
Originally, tmux commands were parsed in the client process into a
struct with the command data which was then serialised and sent to the
server to be executed. The parsing was later moved into the server (an
argv was sent from the client), but the parse step and intermediate
struct was kept.

This change removes that struct and the separate parse step. Argument
parsing and printing is now common to all commands (in arguments.c) with
each command left with just an optional check function (to validate the
arguments at parse time), the exec function and a function to set up any
key bindings (renamed from the old init function).

This is overall more simple and consistent.

There should be no changes to any commands behaviour or syntax although
as this touches every command please watch for any unexpected changes.
2011-01-04 00:42:46 +00:00
Nicholas Marriott
04b32fa734 Don't reset the activity timer for unattached sessions every second,
this screws up the choice of most-recently-used. Instead, break the time
update into a little function and do it when the session is attached.

Pointed out by joshe@.
2011-01-01 01:12:09 +00:00
Nicholas Marriott
9358cfaf4a Use pointer rather than index for the client's last session. 2010-12-20 00:17:22 +00:00
Nicholas Marriott
51487ed22f Track the last session for a client and add a flag to switch-client and
a key binding (L) to move a client back to its last session.
2010-12-11 18:39:25 +00:00
Nicholas Marriott
9a7cde0c9b Two new options:
- server option "exit-unattached" makes the server exit when no clients
  are attached, even if sessions are present;

- session option "destroy-unattached" destroys a session once no clients
  are attached to it.

These are useful for preventing tmux remaining in the background where
it is undesirable and when using tmux as a login shell to keep a limit
on new sessions.
2010-09-26 20:43:30 +00:00
Nicholas Marriott
a22a6deda5 Add -n and -p flags to switch-client to move to the next and previous
session (yes, it doesn't match window/pane, but so what, nor does
switch-client).

Based on a diff long ago from "edsouza".
2010-09-08 22:02:28 +00:00
Nicholas Marriott
c0d3e4315c Don't leak if arguments appear multiple times, from Tiago Cunha. 2010-01-23 17:50:56 +00:00
Nicholas Marriott
76ef8770cd Get rid of the ugly CMD_CHFLAG macro and use a const string (eg "dDU") in the
command entry structs and a couple of functions to check/set the flags.
2009-11-13 19:53:28 +00:00
Nicholas Marriott
34a82e7629 Make all messages sent between the client and server fixed size.
This is the first of two changes to make the protocol more resilient and less
sensitive to other changes in the code, particularly with commands. The client
now packs argv into a buffer and sends it to the server for parsing, rather
than doing it itself and sending the parsed command data.

As a side-effect this also removes a lot of now-unused command marshalling
code.

Mixing a server without this change and a client with or vice versa will cause
tmux to hang or crash, please ensure that tmux is entirely killed before
upgrading.
2009-07-26 12:58:44 +00:00