This changes the meaning of the word-separators option - setting it to
the empty string is equivalent to the previous behavior. From Will Noble
in GitHub issue 2693.
changes the meaning of the word-separators option - setting it to the empty
string is equivalent to the previous behavior. From Will Noble in GitHub issue
2693.
followed by [ or not. Add a flag (e) to the q: format modifier to double
up #s and use it for the window_flags format variable so it doesn't end
up escaping any following text. GitHub issue 2485.
xterm and mintty) and add an option to make tmux send it. Only forward
extended keys if the application has requested them, even though we use
the CSI u sequence and xterm uses CSI 27 ~ - this is what mintty does as
well.
lines (ACS or UTF-8), double or heavy (UTF-8), simple (plain ASCII) or
number (the pane numbers). Lines that won't work on a non-UTF-8 terminal
are translated back into ACS when they are output.
default and the mark and cursor position are swapped with 'jump-to-mark'
(bound to M-x). The line containing the mark is shown in
copy-mode-mark-style with the horizontal position in reverse.
From Anindya Mukherjee in GitHub issue 2209.
- Add styles for the search marking styles (copy-mode-match-style and
copy-mode-current-match-style).
- Show the current match (the one with the cursor on it) in a different style.
- Copying without a selection will copy the current match if there is one.
which allows formats to be expanded. Any styles without a '#{' are still
validated when they are set but any with a '#{' are not. Formats are not
expanded usefully in many cases yet, that will be changed later.
To make this work, a few other changes:
- set-option -a with a style option automatically appends a ",".
- OSC 10 and 11 don't set the window-style option anymore, instead the
fg and bg are stored in the pane struct and act as the defaults that
can be overridden by window-style.
- status-fg and -bg now override status-style instead of trying to keep
them in sync.
get XT added and using that as a marker for xterm(1)-like, assume that
if the terminfo(5) entry already has XT or the clear capability starts
with CSI then the terminal is VT100-like and it should be safe to send
DA requests. The DA responses trigger additional features being added.
use these key sequences by default. Merge the code into the main tty and input
tree processing (convering the latter to use a tree rather than a table at the
same time) and make the option a no-op.
(ACS or UTF-8), double or heavy (UTF-8), simple (plain ASCII) or number (the
pane numbers). Lines that won't work on a non-UTF-8 terminal are translated
back into ACS when they are output.
and the mark and cursor position are swapped with 'jump-to-mark' (bound to
M-x). The line containing the mark is shown in copy-mode-mark-style with the
horizontal position in reverse.
From Anindya Mukherjee in GitHub issue 2209.
- Add styles for the search marking styles (copy-mode-match-style and
copy-mode-current-match-style).
- Show the current match (the one with the cursor on it) in a different style.
- Copying without a selection will copy the current match if there is one.
allows formats to be expanded. Any styles without a '#{' are still validated
when they are set but any with a '#{' are not. Formats are not expanded
usefully in many cases yet, that will be changed later.
To make this work, a few other changes:
- set-option -a with a style option automatically appends a ",".
- OSC 10 and 11 don't set the window-style option anymore, instead the fg and
bg are stored in the pane struct and act as the defaults that can be
overridden by window-style.
- status-fg and -bg now override status-style instead of trying to keep them in
sync.
added and using that as a marker for xterm(1)-like, assume that if the
terminfo(5) entry already has XT or the clear capability starts with CSI then
the terminal is VT100-like and it should be safe to send DA requests. The DA
responses trigger additional features being added.
This is all to detect extensions if terminfo(5) is wrong or inadequate. If it
fails, tmux will just fall back to using the capabilities in the terminfo(5)
entry alone.
terminal features, each of which are defined in one place and map to a
builtin set of terminfo(5) capabilities. Features can be specified based
on TERM with a new terminal-features option or with the -T flag when
running tmux. tmux will also detect a few common terminals from the DA
and DSR responses.
This is intended to make it easier to configure tmux's use of
terminfo(5) even in the presence of outdated ncurses(3) or terminfo(5)
databases or for features which do not yet have a terminfo(5) entry.
Instead of having to grok terminfo(5) capability names and what they
should be set to in the terminal-overrides option, the user can
hopefully just give tmux a feature name and let it do the right thing.
The terminal-overrides option remains both for backwards compatibility
and to allow tweaks of individual capabilities.
tmux already did much of this already, this makes it tidier and simpler
to configure.
pane/window options rather than all being session options. This is
useful for example to create a pane that is automatically closed on some
condition. From Anindya Mukherjee.
and attributes and use them to restore the previous behaviour of
window-status-style being the default for window-status-format in the
status line. From John Drouhard in GitHub issue 1912.
there should be no change to existing behaviour) and are set and shown
with set-option -p and show-options -p.
Change remain-on-exit and window-style/window-active-style to be pane
options (some others will be changed later).
This makes select-pane -P and -g unnecessary so no longer document them
(they still work) and no longer document set-window-option and
show-window-options in favour of set-option -w and show-options -w.
multiple commands to be easily bound to one hook. set-hook and
show-hooks remain but they are now variants of set-option and
show-options. show-options now has a -H flag to show hooks (by default
they are not shown).
changes to allow the status line to be entirely configured with a single
option.
Now that it is possible to configure their content, enable the existing
code that lets the status line be multiple lines in height. The status
option can now take a value of 2, 3, 4 or 5 (as well as the previous on
or off) to configure more than one line. The new status-format array
option configures the format of each line, the default just references
the existing status-* options, although some of the more obscure status
options may be eliminated in time.
Additions to the #[] syntax are: "align" to specify alignment (left,
centre, right), "list" for the window list and "range" to configure
ranges of text for the mouse bindings.
The "align" keyword can also be used to specify alignment of entries in
tree mode and the pane status lines.
been a limitation for a long time.
There are two new options, window-size and default-size, and a new
command, resize-window. The force-width and force-height options and the
session_width and session_height formats have been removed.
The new window-size option tells tmux how to work out the size of
windows: largest means it picks the size of the largest session,
smallest the smallest session (similar to the old behaviour) and manual
means that it does not automatically resize windows. The default is
currently largest but this may change. aggressive-resize modifies the
choice of session for largest and smallest as it did before.
If a window is in a session attached to a client that is too small, only
part of the window is shown. tmux attempts to keep the cursor visible,
so the part of the window displayed is changed as the cursor moves (with
a small delay, to try and avoid excess redrawing when applications
redraw status lines or similar that are not currently visible). The
offset of the visible portion of the window is shown in status-right.
Drawing windows which are larger than the client is not as efficient as
those which fit, particularly when the cursor moves, so it is
recommended to avoid using this on slow machines or networks (set
window-size to smallest or manual).
The resize-window command can be used to resize a window manually. If it
is used, the window-size option is automatically set to manual for the
window (undo this with "setw -u window-size"). resize-window works in a
similar way to resize-pane (-U -D -L -R -x -y flags) but also has -a and
-A flags. -a sets the window to the size of the smallest client (what it
would be if window-size was smallest) and -A the largest.
For the same behaviour as force-width or force-height, use resize-window
-x or -y, and "setw -u window-size" to revert to automatic sizing..
If the global window-size option is set to manual, the default-size
option is used for new windows. If -x or -y is used with new-session,
that sets the default-size option for the new session.
The maximum size of a window is 10000x10000. But expect applications to
complain and much higher memory use if making a window excessively
big. The minimum size is the size required for the current layout
including borders.
The refresh-client command can be used to pan around a window, -U -D -L
-R moves up, down, left or right and -c returns to automatic cursor
tracking. The position is reset when the current window is changed.
This adds two new options, window-size and default-size, and a new
command, resize-window.
The force-width and force-height options, and the session_width and
session_height formats have been removed.
The new window-size option tells tmux how to work out the size of
windows: largest means it picks the size of the largest session,
smallest the smallest session (similar to the old behaviour) and
manual means that it does not automatically resize
windows. aggressive-resize modifies the choice of session for largest
and smallest as it did before.
If a window is in a session attached to a client that is too small,
only part of the window is shown. tmux attempts to keep the cursor
visible, so the part of the window displayed is changed as the cursor
moves (with a small delay, to try and avoid excess redrawing when
applications redraw status lines or similar that are not currently
visible).
Drawing windows which are larger than the client is not as efficient
as those which fit, particularly when the cursor moves, so it is
recommended to avoid using this on slow machines or networks (set
window-size to smallest or manual).
The resize-window command can be used to resize a window manually. If
it is used, the window-size option is automatically set to manual for
the window (undo this with "setw -u window-size"). resize-window works
in a similar way to resize-pane (-U -D -L -R -x -y flags) but also has
-a and -A flags. -a sets the window to the size of the smallest client
(what it would be if window-size was smallest) and -A the largest.
For the same behaviour as force-width or force-height, use
resize-width -x or -y.
If the global window-size option is set to manual, the default-size
option is used for new windows. If -x or -y is used with new-session,
that sets the default-size option for the new session.
The maximum size of a window is 10000x10000. But expect applications
to complain and higher memory use if you make a window that big. The
minimum size is the size required for the current layout including
borders.
This change allows some code improvements, most notably that since
windows can now never be cropped, that code can be removed from the
layout code, and since panes can now never be outside the size of the
window, window_pane_visible can be removed.
